Windows 10 will reach EOS (end of support) on October 14, 2025. For more information, see this article.

Avatar for Username

Sök i support

Akta dig för supportbedrägerier: Vi kommer aldrig att be dig att ringa eller skicka ett sms till ett telefonnummer eller dela personlig information. Rapportera misstänkt aktivitet med alternativet "Rapportera missbruk".

Läs mer

Denna tråd har arkiverats. Ställ en ny fråga om du behöver hjälp.

pull down notifications

ffostest.zteopen
ffostest.zteopen
more options

Upgraded to FFOS 1.2 on my ZTE Open. I have a notification, but I can't pull it down on the home screen as I did it under FFOS 1.1.

Upgraded to FFOS 1.2 on my ZTE Open. I have a notification, but I can't pull it down on the home screen as I did it under FFOS 1.1.

Vald lösning

Hello,

After reading the information provided about your issue I suggest a soft reset of the phone.

  1. Take the back cover of the phone off.
  2. Take the battery out.
  3. Take the SIM card and microSD card out (if applicable).
  4. Wait 10 seconds.
  5. Put the SIM card and microSD card back in (if applicable).
  6. Put the battery back in.
  7. Put the back cover back on.
  8. Turn the device on.
  9. Check if the issue you were having is still present.

Please report back to us if this solved your problem!

Thank you

Läs svaret i sitt sammanhang 👍 1

Alla svar (2)

iamjayakumars
iamjayakumars
more options

Vald lösning

Hello,

After reading the information provided about your issue I suggest a soft reset of the phone.

  1. Take the back cover of the phone off.
  2. Take the battery out.
  3. Take the SIM card and microSD card out (if applicable).
  4. Wait 10 seconds.
  5. Put the SIM card and microSD card back in (if applicable).
  6. Put the battery back in.
  7. Put the back cover back on.
  8. Turn the device on.
  9. Check if the issue you were having is still present.

Please report back to us if this solved your problem!

Thank you

ffostest.zteopen
ffostest.zteopen Frågans ägare
more options

Hi iamjayakumars, thank you for your fast answer.

I did as suggested and that solved the issue :)

Thanks again! L