• Rozwězany
  • Archiwěrowany

Firefox updated from ESR to retail even though group policy settings disable update

I look after about 20 PCs. All Windows 10. All were running Firefox ESR ranging from 115 - 128. As I get time I update each to the latest 128.x. Using group policies I've… (cytajśo wěcej)

I look after about 20 PCs. All Windows 10. All were running Firefox ESR ranging from 115 - 128. As I get time I update each to the latest 128.x. Using group policies I've disabled all update settings.

However, on two of the PCs, they have updated to v139.0.1. Both of the users swear they did not manually do any update. I can't figure out how they got downgraded to the retail channel.

So my question is, since 128 < 139 how can I get them back on to the ESR channel, without loosing history, bookmarks, passwords and saved logins? I gather FF's installer will detect 128 as an older version and throw an error?

ESR -> Retail to me is a downgrade. So is it possible then to upgrade back to 128.11.x?

Each PC is refreshed annually and the only backup of the profile folder I have is from the last refresh, which in most cases in 8-9 months old.

Is there any way to find out why the downgrade happened when group policy forbids it, and the user did not manually download and install the latest version?

When these downgrades happen they break things. For example, when one PC was downgraded to retail his outlook.com email no longer works. If he uses his laptop which is on 128.11.0 it works fine.

Pšašany wót wužywarja citizen1138x pśed 8 mjasecami

Wótegronjony wót wužywarja Mike Kaply pśed 8 mjasecami

  • Rozwězany

Install Thunderbird on iPhone

Can’t figure out how to set up Thunderbird on iphone. Think I installed, made donation but can’t finish setup?

Pšašany wót wužywarja hgfleisc pśed 4 mjasecami

Wótegronjony wót wužywarja James pśed 4 mjasecami

  • Rozwězany

TB is gone

Hi, folgendes Problem: plötzlich hatte ich keinen Zugang mehr zu TB, hab alles mögliche versucht, nix ging. Hab dann Update versucht, nix, dann neue Version runtergeladen… (cytajśo wěcej)

Hi, folgendes Problem: plötzlich hatte ich keinen Zugang mehr zu TB, hab alles mögliche versucht, nix ging. Hab dann Update versucht, nix, dann neue Version runtergeladen, Meldung: A newer version of TB may have made changes to your profile.... etc. wie krieg ich das wieder hin ????

Pšašany wót wužywarja mowest9999 pśed 4 mjasecami

Wótegronjony wót wužywarja Mapenzi pśed 4 mjasecami

  • Rozwězany
  • Archiwěrowany

not sending SMTP email since update

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'. H… (cytajśo wěcej)

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'.

Here are the particulars to my system: john@cm26:~> sudo zypper if MozillaThunderbird Loading repository data... Reading installed packages...


Information for package MozillaThunderbird:

Repository  : Update repository with updates from SUSE Linux Enterprise 15 Name  : MozillaThunderbird Version  : 140.1.0-150200.8.230.1 Arch  : x86_64 Vendor  : SUSE LLC <https://www.suse.com/> Installed Size : 284.8 MiB Installed  : Yes Status  : up-to-date Source package : MozillaThunderbird-140.1.0-150200.8.230.1.src Upstream URL  : https://www.thunderbird.net/ Summary  : An integrated email, news feeds, chat, and newsgroups client Description  : 

   Thunderbird is a free, open-source, cross-platform application for
   managing email, news feeds, chat, and news groups. It is a local
   (rather than browser- or web-based) email application that is powerful
   yet easy to use.



   KDE

Information for pattern kde:

Repository  : Main Repository Name  : kde Version  : 20231206-lp156.2.2 Arch  : noarch Vendor  : openSUSE Installed  : Yes Visible to User : Yes Summary  : KDE Applications and Plasma 5 Desktop Description  : 

   Packages providing the Plasma desktop environment and applications from KDE.

Contents  : 

   S  | Name                        | Type    | Dependency
   ---+-----------------------------+---------+------------
   i+ | patterns-kde-kde            | package | Required
   i  | patterns-kde-kde_plasma     | package | Required
   i  | MozillaFirefox              | package | Recommended
   i  | ark                         | package | Recommended
   i  | avahi                       | package | Recommended
   i  | discover                    | package | Recommended
   i  | dolphin                     | package | Recommended
   i  | gwenview5                   | package | Recommended
   i  | kate                        | package | Recommended
   i  | kcalc                       | package | Recommended
   i  | kipi-plugins                | package | Recommended
   i  | konsole                     | package | Recommended
   i  | okular                      | package | Recommended
   i  | patterns-desktop-multimedia | package | Recommended
   i  | patterns-games-games        | package | Recommended
   i  | patterns-kde-kde_internet   | package | Recommended
      | patterns-kde-kde_pim        | package | Recommended
   i  | patterns-kde-kde_utilities  | package | Recommended
   i  | patterns-kde-kde_yast       | package | Recommended
   i  | patterns-office-office      | package | Recommended
   i  | skanlite                    | package | Recommended
   i  | spectacle                   | package | Recommended
   i  | yast2-control-center-qt     | package | Recommended



   SUSE

   Information for product Leap:

Repository  : Main Repository Name  : Leap Version  : 15.6-1 Arch  : x86_64 Vendor  : openSUSE End of Support  : 2025-12-30 Flavor  : dvd Is Base  : Yes Installed  : Yes Status  : up-to-date Update Repositories : --- CPE Name  : cpe:2.3:o:opensuse:leap:15.6:*:*:*:*:*:*:* Short Name  : openSUSE Leap Summary  : openSUSE Leap 15.6 Description  : 

   openSUSE Leap 15.6.

   KERNEL

john@cm26:~> uname -a Linux cm26 6.4.0-150600.23.60-default #1 SMP PREEMPT_DYNAMIC Tue Jul 1 14:43:49 UTC 2025 (6f98261) x86_64 x86_64 x86_64 GNU/Linux ___________________________________________________________________________________________-

Update particulars since the 8/4/2025

|root@cm26|'zypper' 'up'| 2025-08-04 14:55:01|install|libomp-devel|20-639.1|x86_64||devel_tools_compiler|1e51a50e5fce9250ba8f0022954c5ace3023e4e96f036caa5d9a332fb576648383f420fea778fef6c44a3973465c1e412b9d76369a2b5cf9bf09e803c2d27b55| 2025-08-04 14:55:02|install|llvm|20-639.1|x86_64||devel_tools_compiler|227efb182acf8ca11178437c1aa5392df7b533f6e5d66af6f04282cfb70b73e1365b8508084553ba5c6a6dd2c17e2d0991468c8b1cdb37ae92e40167b908e182| 2025-08-04 14:55:02|install|llvm-gold|20-639.1|x86_64||devel_tools_compiler|8ed08f0a486cce4a71fc01b5b619ca740820d86e4a65ecce3978e8fe4e3bd7d1bf3f2276a477ab72285b84073d1eb1af25786859eb3bc4d4867ba87c5d6769f3| 2025-08-04 14:55:02|install|llvm-polly|20-639.1|x86_64||devel_tools_compiler|eda6140297ac129aca87e3e46ee515145512a3d2cdc0c9b9eb60422c126ea6e6b8802b2921a4c1b0b321f90432e56d1a2cac924a199c49f3dcb4a9bd13bade9a| 2025-08-04 14:55:02|install|llvm-vim-plugins|20-639.1|noarch||devel_tools_compiler|5432e221a402b8944b39dd9e7c5da372021ada65a635cc85b7f3a0e908bbdc668a1f4c8f4282169852d08284b05e126e7825f5ed007953485d5dd38acccca0d8| 2025-08-04 14:55:02|install|llvm-polly-devel|20-639.1|x86_64||devel_tools_compiler|32680f5a310dcedc04d863fa5b6aadbdd2a6e4649900e5cee5e24ff6d8916f5fd491508ab3a5bc6fbef6b1fbb977a624a6a1e7633761c309dadef48dc8bc24f9| 2025-08-04 14:55:02|install|llvm-devel|20-639.1|x86_64||devel_tools_compiler|e5308addf7fc2f6629d8673d8f7c51a2d64f8b350dcec20908fc0b54f63e7bf73dd547673d2e3cb266d7293b667fa6914ecf4bbedcf24a9f05f793fc95aeb2c7| 2025-08-04 14:55:02|install|kmozillahelper|5.0.6-bp156.2.3.1|x86_64||repo-backports-update|f700a7da448bb28b8041237c0da511ef7c185c300d424e0a9b0d5fe907c9e6aa| 2025-08-04 14:55:05|install|MozillaThunderbird|140.1.0-150200.8.230.1|x86_64||repo-sle-update|d05f87c18c5a52444c03c07950267b80ab25d85155c82ed12e2e786ccf96b6ef| 2025-08-04 14:55:06|install|alsa-ucm-conf|1.2.10-150600.3.8.1|noarch||repo-sle-update|bebdf49214321c88f819fa2c760c323ec2c392d9dd966fae4641588dbec0dad8| 2025-08-04 14:55:06|install|apache2-manual|2.4.58-150600.5.35.1|noarch||repo-sle-update|1c378be636ced16b707429601950dfb43760af86c05546b9eb1b243796111df8|

  1. 2025-08-04 14:55:07 apache2-prefork-2.4.58-150600.5.35.1.x86_64.rpm installed ok
  2. Additional rpm output:
  3. Requesting apache restart (all instances)

2025-08-04 14:55:07|install|apache2-prefork|2.4.58-150600.5.35.1|x86_64||repo-sle-update|43cb40e3c600306fb44274cd06640cf14ad1a22658a72536d9179e151401b2a3| 2025-08-04 14:55:07|install|apache2-utils|2.4.58-150600.5.35.1|x86_64||repo-sle-update|c9dde3af023734baa89bd680e7d00b48ee989798fed26d8509f00edbd3b7faf6| 2025-08-04 14:55:09|install|java-11-openjdk-headless|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|0d7d34a705a5b09e5919d731e50be2105b4c4fcada01f644da1fd5d56427d750| 2025-08-04 14:55:09|install|libsqlite3-0|3.50.2-150000.3.33.1|x86_64||repo-sle-update|42fd21bd429a1e4f41b52bc5712ba1f2c6ed9bb67a50992672ee98f3ea53dbbc| 2025-08-04 14:55:09|install|sqlite3|3.50.2-150000.3.33.1|x86_64||repo-sle-update|7e035b2698455e315dd138fbb424b7d6d1dfd63fe81edfb59f7e04158d2d0d15| 2025-08-04 14:55:09|install|sqlite3-tcl|3.50.2-150000.3.33.1|x86_64||repo-sle-update|20cb9d09ad5fc46faf921f7ff806d228c6a04804d8dd89a6f5ea42c7a5bd4577| 2025-08-04 14:55:10|install|yast2-packager|4.6.10-150600.3.3.1|x86_64||repo-sle-update|cf13dc5dbbb9d34da4500390565b42bf8ff88a83a1bf514d4b68cfe85e7a08e6| 2025-08-04 14:55:10|install|MozillaThunderbird-translations-common|140.1.0-150200.8.230.1|x86_64||repo-sle-update|a06da251ea93e1a75acf8ac5a962d802d19598225155b4b87fa119cc0efb2a42|

  1. 2025-08-04 14:55:11 apache2-2.4.58-150600.5.35.1.x86_64.rpm installed ok
  2. Additional rpm output:
  3. Please check /etc/permissions.local for settings of /usr/sbin/suexec .
  4. Updating /etc/sysconfig/apache2 ...
  5. Requesting apache restart (all instances)

2025-08-04 14:55:11|install|apache2|2.4.58-150600.5.35.1|x86_64||repo-sle-update|1664d3cd611e6090798be19495359c12976bf574f5310c989e2ea62dfae32e50| 2025-08-04 14:55:11|install|java-11-openjdk|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|39be984b1799bdbc90d89710495e33e8081f02c192af819ad656c97f5b1f6eda| 2025-08-04 14:55:11|install|sqlite3-devel|3.50.2-150000.3.33.1|x86_64||repo-sle-update|46b1f19824e4202ab681981af1bbd03d0b619d2970505b095d591cc86322e89b| 2025-08-04 14:55:12|install|apache2-devel|2.4.58-150600.5.35.1|x86_64||repo-sle-update|7274bac7d40919fe65bc717b3ad8b9b8628da8bc041bbc054b6d3e14e76d73e1|

  1. 2025-08-04 14:55:13 %posttrans(apache2-prefork-2.4.58-150600.5.35.1.x86_64) script output:
  2. Restarting apache (all instances)

2025-08-04 14:55:14|patch |openSUSE-2025-283|1|noarch|repo-backports-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2672|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2613|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2666|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2684|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2660|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2546|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 15:57:23|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|install|libdjvulibre21|3.5.27-150200.11.17.1|x86_64||repo-sle-update|1c23e1246aa51371a039161a94023c894c525eae8ef7ad9e1b3ca6cb3fad682b| 2025-08-05 13:54:51|install|python-doc|2.7.18-150000.83.1|noarch||repo-sle-update|edf4affcbc576d8c57a8a47a988978bda82448ea9b079bdea416d7d101be02b7| 2025-08-05 13:54:52|install|python-doc-pdf|2.7.18-150000.83.1|noarch||repo-sle-update|0bd6b6669e56baf74c146abc8cf67f151043c8d3f0acfb29e6be01c1f1878902| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2703|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2701|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-06 14:26:15|command|root@cm26|'zypper' 'up'| 2025-08-06 14:26:16|install|libopenh264-8|2.6.0-2.sle150600.1|x86_64||repo-openh264|e69db207f4cc68a328f301d172deba5b01a705ffa355c55445dd1c787e274940| 2025-08-06 14:26:16|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64||repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-06 14:26:16|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64||repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-06 14:26:16|install|hwinfo|21.89-150500.3.12.1|x86_64||repo-sle-update|c317cb92b23549f431aec4eed80d404afb3696fd383e59762bfd438a39d7affb| 2025-08-06 14:26:16|install|libpython3_11-1_0|3.11.13-150600.3.35.1|x86_64||repo-sle-update|7cce50d079b3ca4e2400262f04f5f40e7dd2ad0aaf5f8d280e12ef48da4141fe| 2025-08-06 14:26:17|install|python311-base|3.11.13-150600.3.35.1|x86_64||repo-sle-update|9625750fe68ffedf508a9ad7017810eb3b80bcd56bf66524a4c636e84b8829a4| 2025-08-06 14:26:17|install|python311|3.11.13-150600.3.35.2|x86_64||repo-sle-update|f21b3ac71288810276c632a2812741315876a88ebc70db8725676235831556c0| 2025-08-06 14:26:17|install|python311-curses|3.11.13-150600.3.35.2|x86_64||repo-sle-update|7e7f4980631592315cae3eff001dc6aefccd2d00882d5b321c5f7363293b7f84| 2025-08-06 14:26:17|install|libsystemd0|254.27-150600.4.43.3|x86_64||repo-sle-update|c95566b16ebc099cb1cd3e176542c52205b06f132cfb699a2621cdcf69e49b16| 2025-08-06 14:26:17|install|libudev1|254.27-150600.4.43.3|x86_64||repo-sle-update|fb64712ccaa6f9d6c3bd48f0feaefbd4884affc32266a94bb43ff630d37a904a|

  1. 2025-08-06 14:26:24 systemd-254.27-150600.4.43.3.x86_64.rpm installed ok
  2. Additional rpm output:
  3. /usr/lib/tmpfiles.d/inn.conf:1: Line references path below legacy directory /var/run/, updating /var/run/news → /run/news; please update the tmpfiles.d/ drop-in file accordingly.
  4. /usr/lib/tmpfiles.d/nagios.conf:2: Line references path below legacy directory /var/run/, updating /var/run/nagios → /run/nagios; please update the tmpfiles.d/ drop-in file accordingly.

2025-08-06 14:26:24|install|systemd|254.27-150600.4.43.3|x86_64||repo-sle-update|8e1eb79e60344a723be2af579de0bae7b8d1c5a9b6d83909da9e6644b7f249b4| 2025-08-06 14:26:25|install|systemd-container|254.27-150600.4.43.3|x86_64||repo-sle-update|6c578090d9dc1351af0500fae60dbbe1286b7396932b6edc199a40e154f87a10| 2025-08-06 14:26:25|install|systemd-doc|254.27-150600.4.43.3|x86_64||repo-sle-update|c250b09c2fc6d4f61169faab2ff4c8cbd48985e5687f6351d257d76d59f29c83| 2025-08-06 14:26:25|install|python311-dbm|3.11.13-150600.3.35.2|x86_64||repo-sle-update|36cb2e01bb69b9c965737eb35c17d2abeee237fe83bd472be4ad2d48566065e5| 2025-08-06 14:26:29|install|udev|254.27-150600.4.43.3|x86_64||repo-sle-update|ca4c5c22e5d348b33988a28525a944d5c8ef6148c248aaca9e2d4f07611e0f6b| 2025-08-06 14:26:29|install|systemd-lang|254.27-150600.4.43.3|noarch||repo-sle-update|e12fb357b0cc0852ddbf4e6cbfc3fd2a65a3224241c40c7e2d670755966ba2eb| 2025-08-06 14:26:29|install|hwinfo-devel|21.89-150500.3.12.1|x86_64||repo-sle-update|deb9d6a6d42fc290b43c208db3fb6b4d059a745c33b8ed9a682204d2f111c9bd|

  1. 2025-08-06 14:26:29 %posttrans(udev-254.27-150600.4.43.3.x86_64) script output:
  2. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.53-default -f
  3. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  4. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  5. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
  6. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
  7. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
  8. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  9. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  10. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  11. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  12. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  13. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  14. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  15. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  16. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  17. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  18. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  19. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
  20. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  21. dracut[I]: memstrack is not available
  22. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  23. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  24. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  25. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  26. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  27. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  28. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  29. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  30. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  31. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  32. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  33. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  34. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  35. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  36. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  37. dracut[I]: memstrack is not available
  38. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  39. dracut[I]: *** Including module: systemd ***
  40. dracut[I]: *** Including module: systemd-initrd ***
  41. dracut[I]: *** Including module: i18n ***
  42. dracut[I]: *** Including module: drm ***
  43. dracut[I]: *** Including module: plymouth ***
  44. dracut[I]: *** Including module: btrfs ***
  45. dracut[I]: *** Including module: kernel-modules ***
  46. dracut[I]: *** Including module: kernel-modules-extra ***
  47. dracut[I]: *** Including module: resume ***
  48. dracut[I]: *** Including module: rootfs-block ***
  49. dracut[I]: *** Including module: suse-btrfs ***
  50. dracut[I]: *** Including module: suse-xfs ***
  51. dracut[I]: *** Including module: terminfo ***
  52. dracut[I]: *** Including module: udev-rules ***
  53. dracut[I]: *** Including module: dracut-systemd ***
  54. dracut[I]: *** Including module: haveged ***
  55. dracut[I]: *** Including module: ostree ***
  56. dracut[I]: *** Including module: usrmount ***
  57. dracut[I]: *** Including module: base ***
  58. dracut[I]: *** Including module: fs-lib ***
  59. dracut[I]: *** Including module: shutdown ***
  60. dracut[I]: *** Including module: suse ***
  61. dracut[I]: *** Including module: suse-initrd ***
  62. dracut[I]: *** Including modules done ***
  63. dracut[I]: *** Installing kernel module dependencies ***
  64. dracut[I]: *** Installing kernel module dependencies done ***
  65. dracut[I]: *** Resolving executable dependencies ***
  66. dracut[I]: *** Resolving executable dependencies done ***
  67. dracut[I]: *** Hardlinking files ***
  68. dracut[I]: *** Hardlinking files done ***
  69. dracut[I]: *** Generating early-microcode cpio image ***
  70. dracut[I]: *** Constructing AuthenticAMD.bin ***
  71. dracut[I]: *** Store current command line parameters ***
  72. dracut[I]: Stored kernel commandline:
  73. dracut[I]: rd.driver.pre=btrfs
  74. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
  75. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
  76. dracut[I]: *** Stripping files ***
  77. dracut[I]: *** Stripping files done ***
  78. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.53-default' ***
  79. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.53-default' done ***
  80. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.60-default -f
  81. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  82. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  83. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
  84. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
  85. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
  86. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  87. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  88. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  89. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  90. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  91. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  92. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  93. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  94. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  95. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  96. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  97. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
  98. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  99. dracut[I]: memstrack is not available
  100. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  101. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  102. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  103. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  104. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  105. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  106. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  107. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  108. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  109. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  110. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  111. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  112. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  113. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  114. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  115. dracut[I]: memstrack is not available
  116. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  117. dracut[I]: *** Including module: systemd ***
  118. dracut[I]: *** Including module: systemd-initrd ***
  119. dracut[I]: *** Including module: i18n ***
  120. dracut[I]: *** Including module: drm ***
  121. dracut[I]: *** Including module: plymouth ***
  122. dracut[I]: *** Including module: btrfs ***
  123. dracut[I]: *** Including module: kernel-modules ***
  124. dracut[I]: *** Including module: kernel-modules-extra ***
  125. dracut[I]: *** Including module: resume ***
  126. dracut[I]: *** Including module: rootfs-block ***
  127. dracut[I]: *** Including module: suse-btrfs ***
  128. dracut[I]: *** Including module: suse-xfs ***
  129. dracut[I]: *** Including module: terminfo ***
  130. dracut[I]: *** Including module: udev-rules ***
  131. dracut[I]: *** Including module: dracut-systemd ***
  132. dracut[I]: *** Including module: haveged ***
  133. dracut[I]: *** Including module: ostree ***
  134. dracut[I]: *** Including module: usrmount ***
  135. dracut[I]: *** Including module: base ***
  136. dracut[I]: *** Including module: fs-lib ***
  137. dracut[I]: *** Including module: shutdown ***
  138. dracut[I]: *** Including module: suse ***
  139. dracut[I]: *** Including module: suse-initrd ***
  140. dracut[I]: *** Including modules done ***
  141. dracut[I]: *** Installing kernel module dependencies ***
  142. dracut[I]: *** Installing kernel module dependencies done ***
  143. dracut[I]: *** Resolving executable dependencies ***
  144. dracut[I]: *** Resolving executable dependencies done ***
  145. dracut[I]: *** Hardlinking files ***
  146. dracut[I]: *** Hardlinking files done ***
  147. dracut[I]: *** Generating early-microcode cpio image ***
  148. dracut[I]: *** Constructing AuthenticAMD.bin ***
  149. dracut[I]: *** Store current command line parameters ***
  150. dracut[I]: Stored kernel commandline:
  151. dracut[I]: rd.driver.pre=btrfs
  152. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
  153. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
  154. dracut[I]: *** Stripping files ***
  155. dracut[I]: *** Stripping files done ***
  156. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.60-default' ***
  157. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.60-default' done ***

2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2717|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2713|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2714|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 07:44:41|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:44:41|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64|root@cm26|repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-07 07:44:41|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64|root@cm26|repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-07 07:45:43|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:45:43|install|crypto-policies|20230920.570ea89-150600.3.12.1|noarch||repo-sle-update|4fa356ff142adf90186ea4770b7543bbe5769650d4da8dac5968fd73f97de8ba| 2025-08-07 07:45:43|patch |openSUSE-SLE-15.6-2025-2720|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 15:49:29|command|root@cm26|'/usr/bin/ruby.ruby2.5' '--encoding=utf-8' '/usr/lib/YaST2/bin/y2start' 'sw_single' 'qt' '-name' 'YaST2' '-icon' 'yast'| 2025-08-07 15:49:30|install|xsane|0.999-bp156.5.8|x86_64|root@cm26|repo-oss|3e87758c12fab61daf9fb6b47702c5040181c77c43b6fcdd804ee2ca791a9e8f38731de5a724aa9f70e1212aa4f950b600bcb3afe48f583439e12f0ddda046ea| 2025-08-08 15:10:39|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-08 15:10:39|install|perl-DBI|1.647.0-150600.12.6.1|x86_64||repo-sle-update|8dc0d1d560b06263d1fab86650bf4e76dc3fdd66bc537a6ca25f70059400f62b| 2025-08-08 15:10:39|install|python311-urllib3|2.0.7-150400.7.21.1|noarch||repo-sle-update|d45bcc3575f40b1a33bf4e2680dc86bcdc0ac7d9f68ccf1bfd192ed25e96d3c6| 2025-08-08 15:10:39|install|update-alternatives|1.19.0.4-150000.4.7.1|x86_64||repo-sle-update|2fa94871cf88a03490bf47e28dbe99f67b306e7ee71eadfa3d101fff5fd5b6bd| 2025-08-08 15:10:39|install|libruby2_5-2_5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|86da48a46d85fbfee262cafe7c5583391d88ba794f0f4acd6b408d1fe8272b9b| 2025-08-08 15:10:40|install|ruby2.5-stdlib|2.5.9-150000.4.46.1|x86_64||repo-sle-update|f3ad5fb18d5feffed499d8cf013ae4faa5780c19000ed58d197f0a06cafb24b8| 2025-08-08 15:10:40|install|ruby2.5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|5265dc9545031c6587772189a0d82ff43766835360ebf46f1a2f7d94318d5814| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2731|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2735|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2739|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2734|1|noarch|repo-sle-update|moderate|security|needed|applied|

Pšašany wót wužywarja jcmcgil pśed 6 mjasecami

Wótegronjony wót wužywarja Wayne Mery pśed 4 mjasecami

  • Rozwězany
  • Archiwěrowany

Downgrade or revert to older version which supports my dictionary (Finnish)

I have lost the possibility use Finnish dictionary for spell checking after Thunderbird upgrade to version 60.3.1. How could i revert to older version and prevent automat… (cytajśo wěcej)

I have lost the possibility use Finnish dictionary for spell checking after Thunderbird upgrade to version 60.3.1. How could i revert to older version and prevent automatic updates?

Pšašany wót wužywarja Sakari Kalliomäki pśed 7 lětami

Wótegronjony wót wužywarja sfhowes pśed 7 lětami

  • Rozwězany
  • Archiwěrowany

Why does Firefox not allow me to install MailTweak?

I came across a site "mozdev.org" that gives instructions as to how to download a file called "mailtweak-0.16.xpi" Firefox will not allow me to download it and I cannot f… (cytajśo wěcej)

I came across a site "mozdev.org" that gives instructions as to how to download a file called "mailtweak-0.16.xpi" Firefox will not allow me to download it and I cannot find it in the list of Firefox add-ons.

Please advise

Pšašany wót wužywarja TeeSee pśed 9 lětami

Wótegronjony wót wužywarja sfhowes pśed 9 lětami

  • Rozwězany

a website is requesting a new version of PHP

I cannot login into a website because they complain that I have an old version of PHP. Is that already included in Firefox? I am using Firefox Vers. 143.0.4 on a MacBook … (cytajśo wěcej)

I cannot login into a website because they complain that I have an old version of PHP. Is that already included in Firefox? I am using Firefox Vers. 143.0.4 on a MacBook Air with MacOS Big Sur, Vers. 11.7.10 Shall I go to the PHP website and download PHP?

Pšašany wót wužywarja Ray Ballisti pśed 5 mjasecami

Wótegronjony wót wužywarja Paul pśed 5 mjasecami

  • Rozwězany
  • Archiwěrowany

Manually move old email and addressbook from unbootable disk to new install

Hi, Updating Ubuntu 24.03 to 23.10 something went wrong and the disk is no longer bootable. All the files appear to be there, but since its not bootable I can't export th… (cytajśo wěcej)

Hi, Updating Ubuntu 24.03 to 23.10 something went wrong and the disk is no longer bootable. All the files appear to be there, but since its not bootable I can't export the data in the normal fashion.

I installed Ubuntu 24.04.3 LTS on a new disk, and mounted the unbootable disk on /oldDisk. My home directory and everything else appears to be intact.

What do I need to move from /oldDisk to the new install to get my address book and emails back?

until I get this fixed you can email me: <redacted>@evvette.net as my account address won't work... thanx in advance, Steve

Pšašany wót wužywarja Steven pśed 6 mjasecami

Wótegronjony wót wužywarja Steven pśed 5 mjasecami

  • Rozwězany

How to remove chatgpt

I installed chatgpt, but I've found it more of a nuisance than a help. I've tried on-line to find out how to remove it but none of the suggestions seemed to work. I'm usi… (cytajśo wěcej)

I installed chatgpt, but I've found it more of a nuisance than a help. I've tried on-line to find out how to remove it but none of the suggestions seemed to work. I'm using the latest version of firefox on a Macbook Pro. Any ideas welcome. Charlie

Pšašany wót wužywarja Charlie pśed 5 mjasecami

Wótegronjony wót wužywarja Paul pśed 5 mjasecami

  • Rozwězany
  • Archiwěrowany

Setting up a GMail account on Thunderbird

Just starting out with Thunderbird - downloaded 60.5.0 onto Windows 7 Home Premium laptop. Trying to configure a new GMail account using the default setup. Information f… (cytajśo wěcej)

Just starting out with Thunderbird - downloaded 60.5.0 onto Windows 7 Home Premium laptop. Trying to configure a new GMail account using the default setup. Information fills in, then attempts to check password. Message "configuration could not be verified" then appears. Account email address and password work OK on GMail web version. Not sure what to check next.

Pšašany wót wužywarja Fred_52 pśed 7 lětami

Wótegronjony wót wužywarja Fred_52 pśed 7 lětami

  • Rozwězany
  • Archiwěrowany

I am moving from Shaw to Telus when Telus adds their web site will I still retain my Addresses book and Folders that are in Firefox?

I have changed from Shaw to Telus, the Telus Tech is unsure if I will loose all my folders and address book within the Mozilla Thunderbird when she changes the Server Set… (cytajśo wěcej)

I have changed from Shaw to Telus, the Telus Tech is unsure if I will loose all my folders and address book within the Mozilla Thunderbird when she changes the Server Settings?

Pšašany wót wužywarja Sidgar pśed 7 lětami

Wótegronjony wót wužywarja Sidgar pśed 7 lětami

  • Rozwězany
  • Archiwěrowany

How can I import all 350 .vcf files (old Live Mail contacts) at a time into Thunderbird's Address Book - I only seem to be able import one .vcf file at a time.

I followed directions for using the add-on ImportExport Tools. When I get to the point of importing from the folder with all the contacts in .vcf format, the usual ways i… (cytajśo wěcej)

I followed directions for using the add-on ImportExport Tools. When I get to the point of importing from the folder with all the contacts in .vcf format, the usual ways in Windows of selecting more than one (such as Ctrl-A for selecting all of them) don't work. (If I go to the file itself in Windows, I can easily select all of them at once.) But I can only select one at a time using the tools to import into the Thunderbird Address Book, which would be very tedious with 350 contacts! Thank you for any help!

Pšašany wót wužywarja WGareth pśed 7 lětami

Wótegronjony wót wužywarja Zenos pśed 7 lětami

  • Rozwězany
  • Archiwěrowany

Move Thunderbird profile from W7 desktop to new W10 desktop

I'm trying to move my Thunderbird email reader from a W7 desktop to a new W10 desktop. I been trying all the suggestions on the "http://kb.mozillazine.org/Moving_your_pro… (cytajśo wěcej)

I'm trying to move my Thunderbird email reader from a W7 desktop to a new W10 desktop. I been trying all the suggestions on the "http://kb.mozillazine.org/Moving_your_profile_folder" site and nothing works. Any ideas what is preventing the profiles.ini from loading my profile? I've tried many iterations of the ini file and paths with no success. Any ideas where to look?

Thank you Regards, HW

Pšašany wót wužywarja Harv Whitman pśed 7 lětami

Wótegronjony wót wužywarja mathieuf pśed 7 lětami

  • Rozwězany
  • Blokěrowany
  • Archiwěrowany

Migrating from Apple Mail to Thunderbird 60.3.1

Maybe 10 years ago I used Thunderbird on my iMac. - I use Thunderbird at work and decided I miss some of the more advanced features that are not in Apple Mail on my iMac … (cytajśo wěcej)

Maybe 10 years ago I used Thunderbird on my iMac. - I use Thunderbird at work and decided I miss some of the more advanced features that are not in Apple Mail on my iMac at home. - Especially after reading that Thunderbird could now share both iCloud's Apple Calendar and Contacts. - I am currently using Mac OS 10.11.6. A little behind the times, but I have been using apps that wouldn't run on the newer Mac OS. - Before installing the new version, I opened the old version of Thunderbird, went to the Tools/Account Settomgs and found the directory in the Mac OS library that needed deleted. and deleted it. I did this because most of my logins and settings have changed a lot and I want to import the current local folders and settings from the current version of Apple Mail. I use my email local folders extensively as a type of database to keep a history of purchases and other important information in the local folders. - I then used App Cleaner to delete the ten year old version of Thunderbird and the support files that were not part of the library folder, such as the actual application, Thunderbird. - I then downloaded and installed Thunderbird 60.31.1. Launched it. Chose not to make it my default because I want to make sure it works first. then went to tools/import and noticed I didn't have the the option to Import Everything. See Jpg. attached. - Then decided to try to import just the Mail. Chose Apple Mail. then Next. Got the No Mailboxes were found in the import message. Again, see the jpg. I did the same for the settings and got the "No Application or file to import data from was found" error message. See yet another jpg. I clicked Finish and went to the forums to search for a solution, but found nothing. So here I am. -what did I miss in this setup, migration from Apple Mail and Integration with contacts and Calendar (iCloud based)? Thank you for your assistance.

I couldn't get any of my screen shots to upload. Sorry.

Pšašany wót wužywarja SuMo Bot pśed 7 lětami

Wótegronjony wót wužywarja koufonissi pśed 6 lětami

  • Rozwězany
  • Archiwěrowany

Migrating to new pc - can't see Events and Tasks

Hi, I have used Thunderbird for some years and it works well for me. I don't do anything fancy, just mail, calendar and tasks as a stand-alone user. I'm migrating to a ne… (cytajśo wěcej)

Hi,

I have used Thunderbird for some years and it works well for me. I don't do anything fancy, just mail, calendar and tasks as a stand-alone user.

I'm migrating to a new pc. - I downloaded and installed Thunderbird. - I did not create any email accounts at this point. - I copied my profile from my old pc as per Mozilla support guidance. - Open Thunderbird - Now I can see my mail, folders and layouts perfectly.

But I cannot see anything at all to do with Events and Tasks. - Tools-Addons says Lightning is installed. - No 'Events and Tasks' in menu bar - No 'Calender' tab in Tools-Addon options-Lightning - No 'Events and Tasks' panel

From 'Events and Tasks' tab on old pc I have exported calendar (Home.ics) ready to import to new pc but I can see no option to import this.

I'm sure I must have done something wrong. I would be most grateful for any advice. I am not a tecchie; I am but a basic user.

thanks john

Pšašany wót wužywarja johnr234 pśed 7 lětami

Wótegronjony wót wužywarja johnr234 pśed 7 lětami