Форум сообщества Все продукты

Hello everyone

I recently upgraded from TB 69 to the latest TB (after a crucial add-on finally got updated), and I'm generally happy with it, except for one little irk:

In Classic layout, the preview pane now contain multiple messages. As far as I can tell, it contains all messages of the selected thread, in date order (not in message list order). I would prefer the preview pane to contain just ONE message, namely the currently selected message. It is annoying to have to click repeatedly inside the preview pane to access the individual messages in the preview pane. It is also visually confusing (to me).

What's worse, the messages in the preview pane do not follow the normal threading: they appear to be shown in order of date, not in the order of the messages in the message list.

In the screenshot, you can see the thread has 11 messages, and in the message list there are three subthreads. The preview pane also shows the 11 messages, but not in the same order as in the message list. Plus, in order for me to read any messages, I need to click inside the preview pane to fold each message in or out.

I prefer a situation where I can click a single message in the message list, and a single message is shown in the preview pane. Is this possible with the latest TB?

Thanks.

Greetings. Please help.

After Win11 update, Firefox started to just show "Gah. Your tab just crashed." I've uninstalled multiple times from MS Store and also direct from website. No luck. Safe mode works fine. My normal mode does not work even when all the addons, etc are disable. I'm a simple user with no customisations of the FF browser.

Tried new profiles, untick performance, etc.

I've even tried restore win11 update to an earlier date. Same result.

Other browsers work fine but I want to support Mozilla. I'm at the point of switching to another.

Crash IDs: bp-0dcff036-72ca-46e1-af89-caad20241126 26/11/2024, 3:50 pm View bp-37129959-b635-469c-aa2b-2f4910241126 26/11/2024, 3:50 pm View bp-809cab3e-8068-40bb-93b0-9e5750241126 26/11/2024, 3:50 pm View bp-e7a27777-15c9-42cd-8618-408230241126 26/11/2024, 3:50 pm View bp-f005a29a-9c8b-415a-8de1-5e0d30241126 26/11/2024, 3:50 pm View

Grateful for your help. Many thanks.

I just installed Thunderbird for Android on my Pixel phone for the first time. I have used Thunderbird on my desktop PC for many years, so I am very familiar with Thunderbird in general. I used the "Export for Mobile" feature on my desktop installation, to import my account settings into the Android installation.

For the most part, Thunderbird for Android works great, as I would have expected. However I am seeing a problem which appears (to me) to be a bug. When I compose and send an email on my phone, and then look in the "Sent" folder on the phone, the email that I just sent shows up there. But only on the phone. If I open Thunderbird on my desktop PC and look at the Sent folder there, the email that I sent from the phone is not there. Apparently, it only gets placed in the phone's Sent folder, but it does not get copied to the email server.

A few other details: -- I use Thunderbird on 2 different desktop systems, a PC and a Mac. When I send email from either of those, that email DOES show up in the Sent folder on the other system. Emails that are sent from either desktop system also show up in my phone's Sent folder. So I know that the Thunderbird desktop application does upload the message to the email server's Sent folder correctly. But Thunderbird for Android does not upload its sent emails.

-- I don't know if it matters, but my email server is Microsoft 365, hosted by GoDaddy.

-- As far as I can tell, the most obvious setting for this is the "Upload sent messages" checkbox, which can be found in the "Sending mail" section of "Account settings" in the Thunderbird Android settings. This checkbox IS IN FACT turned on. I could not find any other settings which could possibly affect the copying of sent messages up to the email server's folders.

Is this a bug? Any ideas what might be causing this? Thanks for any help.

I have used Thunderbird for years (now on 128.5.2esr (64-bit) for Mac). I have a very large number of folders, and I would like to have a default setting for columns in new folders I create. I am aware that you can change the column setting in the folder by clicking the "Select columns to display" button and selecting the ones you want, and that you can change the setting for all folders in an account by going to the "Apply columns to..." > "Folder and its children..." > select the account > select the account name at the top of the list. But I would rather not have to do that every time I create a new folder, but I can't find any other way to do it anywhere, including on another answer to a question in this forum, https://support.mozilla.org/en-US/questions/1426413.

Then I found two settings in the Config Editor... that seem like they might be where this can be done:

• mailnews.database.global.views.conversation.columns, whose settings in my case are:

{"selectCol":{"visible":false,"ordinal":"1"}, "threadCol":{"visible":true,"ordinal":"3"}, "flaggedCol":{"visible":true,"ordinal":"5"}, "attachmentCol":{"visible":false,"ordinal":"7"}, "subjectCol":{"visible":true,"ordinal":"15"}, "unreadButtonColHeader":{"visible":false,"ordinal":"9"}, "senderCol":{"visible":false,"ordinal":"17"}, "recipientCol":{"visible":false,"ordinal":"19"}, "correspondentCol":{"visible":true,"ordinal":"21"}, "junkStatusCol":{"visible":false,"ordinal":"11"}, "receivedCol":{"visible":false,"ordinal":"23"}, "dateCol":{"visible":true,"ordinal":"25"}, "statusCol":{"visible":false,"ordinal":"27"}, "sizeCol":{"visible":false,"ordinal":"29"}, "tagsCol":{"visible":false,"ordinal":"31"}, "accountCol":{"visible":false,"ordinal":"33"}, "priorityCol":{"visible":false,"ordinal":"35"}, "unreadCol":{"visible":false,"ordinal":"37"}, "totalCol":{"visible":false,"ordinal":"39"}, "locationCol":{"visible":true,"ordinal":"41"}, "idCol":{"visible":false,"ordinal":"43"}, "deleteCol":{"visible":false,"ordinal":"13"}, "xnoteCol":{"visible":false,"ordinal":"1"}}

and

• mailnews.database.global.views.global.columns, whose settings in my case are:

{"selectCol":{"visible":false,"ordinal":0}, "threadCol":{"visible":true,"ordinal":0}, "flaggedCol":{"visible":true,"ordinal":0}, "attachmentCol":{"visible":false,"ordinal":0}, "subjectCol":{"visible":true,"ordinal":0}, "unreadButtonColHeader":{"visible":false,"ordinal":0}, "senderCol":{"visible":true,"ordinal":0}, "recipientCol":{"visible":true,"ordinal":0}, "correspondentCol":{"visible":false,"ordinal":0}, "junkStatusCol":{"visible":false,"ordinal":0}, "dateCol":{"visible":true,"ordinal":0}, "receivedCol":{"visible":false,"ordinal":0}, "statusCol":{"visible":false,"ordinal":0}, "sizeCol":{"visible":false,"ordinal":0}, "tagsCol":{"visible":false,"ordinal":0}, "accountCol":{"visible":false,"ordinal":0}, "priorityCol":{"visible":false,"ordinal":0}, "unreadCol":{"visible":false,"ordinal":0}, "totalCol":{"visible":false,"ordinal":0}, "locationCol":{"visible":true,"ordinal":0}, "idCol":{"visible":false,"ordinal":0}, "deleteCol":{"visible":false,"ordinal":0}}

The first one matches the columns I see in a newly created folder better, having the "xnoteCol" entry, but my new folders also have several columns related to my CardBook extension at the bottom of the list. Moreover, the settings' arguments don't make sense in terms of what I see. For example, I see the Thread column, whose settings – ("threadCol":{"visible":true,"ordinal":"3"} – make sense since "visible" is set to "true", but I also see the Attachments column, whose settings – "attachmentCol":{"visible":false,"ordinal":"7"} – *don't* make sense because "visible" is set to "false". Similar no-sense settings occur in the second setting.

So there *is* a way to change the default column settings in Config Editor..., which makes a whole lot of sense, but the way the settings are set in these two settings, which apparently are not the ones that fully determine my default settings given the CardBook-related columns that I see, do *not* seem to make sense.

The "Folder and its children..." approach works, but it makes it harder than it should be, and it seems like there must be a way to change the defaults in Config Editor.... If there is, please tell me how.

Thanks for any help you can give...

I run a Synology DSM server on my local network. The website page to load locally inside my LAN is along the lines of 127.0.0.1:1001.

MacOSX 15.0.1 FireFox(FF) 132.0 (aarch64)

Previously accessing the DSM via the local IP address worked fine with no problems. Now, following one of the last couple of FF updates, I get an "unable to connect" message.

I also have a domain that routes to my local server and I can still access the DSM via the internet http address through FF. So I know that DSM is running fine and I have verified the settings within DSM.

I can load the DSM via the local IP in both Safari and Chrome. Only FF says it's unable to connect. So that shows that my DSM settings are fine and the page is available and loads in Safari and Chrome via the local IP.

I searched the forum and found similar postings, but not quite the same issue as mine. I deleted the cache & cookies/site data. I ensured the Proxy mode in FF is set to "No Proxy". I do not have any extensions running or themes.

I am at a complete loss at what setting in FF I need to change to restore this functionality.

Thanks, Matt

Not sure I selected the proper category, but I've been coding websites since for longer than I like to admit.. (About 1998 memory serves me right..).. Anyhow, at this point I maintain 3 websites.. Here's one of them: https://www.pbl-sn3.com As you will see there are many pages involved.. I used to able to right click on a photo or graphic and Firefox would tell me what it was, its filename, and even it's size.. But no more.. This was a really handy feature that kept me a Firefox user ever since I discovered Firefox..

Now, instead of right clicking on it (so I can find it easily on my PC using a great little program called "Everything" (see https://www.voidtools.com/ which is amazing in its own right..), I'm stuck viewing the Page Source, finding the file in all the jumble of code, etc. etc. etc... (Yeah, I can right click on the image and open it in a new tab, but it tells me nothing about its SIZE either.. Dang!

So am I the only guy that's ever complained about this? (I recently downloaded Google Chrome which appears to be a less-than-perfect knockoff of Firefox and also lacks this "feature".. But my bank likes it whereas they would no longer allow me to do online banking with Firefox.. A pesky but unrelated issue here, I know..)

Anyhow, if there's a quick fix for my problem, I sure would appreciate a how-to implement it! Thanks for "listening"! - Ol' Bill in California

What setting do I need to change so that threading does not occur in any of my email folders? I hate this feature and wish to remove it permanently.

Thanks, Steve

1st I am 90 yrs old. Been using this app since it was created. Never a problem until these new updates.

Was trying to delete old file (like the old program (block and hit delete). Found some message about deleting Trash folder and things I did not and do not understand. I now have LOST all my data, emails, addresses, everything.

I tried deleting the program and downloading a new copy. Did not work.

App Will not let me create an account. It keeps searching forever and have to cancel. App can't find my google password and just locks up. I only have two gmail addresses. I can access them by going to gmail.com but all my folders are not there. I need HELP please.

I can't even update my address file at the gmail site as I have no access to anything from TB. I am a research genealogist and now have lost all my saved research information.

Patrecia Glau <edited>@gmail.com <phone redacted>

I have seen many questions a bit like mine but they all refer to downloading emails. Mine is different: "The folder 'Trash on my@email.com' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again." It now happens on two different email addresses (one is POP one is IMAP). Trash seems otherwise to work and can be deleted. But still this alarm. MAS OS 15.1.1 (24B91) - latest Thunderbird 128.5.2esr (64-bit)

bold text Firefox is demanding that I sign in to my Amazon account with a passkey on my phone. I don't have a passkey on my phone. I cannot cancel the request!

I have Firefox's New Tab set as my home page, since I'm choosing to divorce myself from political doomscrolling for the next four years. The New Tab page is perfect for having frequently visited sites at the top, Pocket stories I can curate in the middle, and what used to be a history of articles and sites I've read most recently in "Recent Activity" along the bottom. Within the last few days, "Recent Activity" has been blank, and will no longer keep track of articles I've recently read. I've tried clearing the browser history and cookies, and it came back for a moment, but quickly went back to being blank. And the major downside to clearing the browser is that my four rows of most frequently visited sites gets wiped clean also, and I have to spend time getting them back on the list. I do not have Firefox set to automatically clear history upon closing it. I've tried turning "Recent Activity" off and on with the page's Settings (cog in the bottom right corner). I'd really like to have this back, as it can help me find recently read content (especially Pocket content) easier than wading through the History log. Any help would be appreciated.

Not sure if this Settings or what.

I was attempting to add a gmail address (one of mine) to Thunderbird. I got what you see in the attached. It's taking up one of my two entire monitors. (I'm writing via the 2nd monitor.) There's no title bar. The listed links don't work Ctrl F4 to close the window doesn't work. It's stuck there (Hung).

AND, "ALLOW" doesn't appear.

I'm going to have to reboot. But I really need to set this up.

Thanks, Kami

When I receive an email with double line spacing I can't find a way to alter this to single line spacing. I'd like to be able to change from one to the other at will. M

We tried 2 different computers, but two different users. Type in the user name and the password and it looks like it will start up, but then returns to the login paged.

I've been using Thunderbird for years to access my gmail account through my ieee alias. Sometime after 4/2/2025 my login fails with the message "Login to server imap.googlemail.com....failed". I've tried changing the imap server to "imap.gmail.com" but get similar results. For some reason, it appears that something changed on 4/3 that prevents a successful login to the gmail server from Tbird. I have both Tbird and gmail configured for OAuth2. Update: As it turns out, following the steps in this link resolves the issue: https://support.mozilla.org/en-US/questions/1375558

Bookmarks have been intermittently disappearing for weeks but I could always see the blue star when I visited favorite sites that I use upon starting my day that I had bookmarked. This morning all bookmarks were missing. I tried clearing cache which had worked to restore some bookmarks that were missing. Now everything is gone and I cannot recover them. There is an error that appears when I open Firefox re: bookmarks and I followed the steps but it did not work. I really need my bookmarks to do all the things I need to do, like everyone else, including medical information websites. I hope you all can get this figured out as it has been a problem for a month for me, on a PC. I know my favorites are stored somewhere on this computer but I cannot make them populate. If someone would like to take control of my computer and fix it for me, I would happy to let you do that. I have run sfc/scannow and chkdsk/f as well as a total virus scan with Norton. I have restarted my computer several times as well as done a complete shutdown several times.

Suddenly this morning, I can't send an email through Thunderbird, but I can through my email service provider's platform. No settings have been changed and I have the most up to date version.

I get this message:

"Sending of the message failed. The message could not be sent because connecting to Outgoing server (SMTP) (my account) failed. The server may be unavailable or is refusing SMTP connections. Please verify that your Outgoing server (SMTP) settings are correct and try again."

I am not at all tech savvy with this type of thing, so I need step by step, easy instructions, please. Thank you!

I changed computers and in order to make sure I could use TB on the new one, I updated the old computer from 120-something to 128.5.2, and then installed 128.5.2 on the new one as well. The transfer went okay - once I saw the video that explains how to do it - but when I sat down to write an R-T-L email, it didn't automatically R-T-L, and when I looked for the "switch-direction" button I was used to in the old TB, it wasn't there! I can write in Hebrew, (or Arabic), but I can't R-T-L the text. HELP? HELP! Thank you