Firefox for Enterprise Support Forum

Hello, I have a problem with setting up HTTPs only Mode in my Organization, I read a lot about that, but I dont see the "dom.security.https_only_mode" switch in GPO, we have the newest admx for Firefox. We need that to specific container, but still I dont know how to set it up, even via regedit, or preferences. Can someone describe me when can I set it up ? It could be using json file (which exactly file and how?), registry or just gpo. Regards, M.

Hi,

We've GPOs in place for Edge and Chrome that set said browsers on all our Windows endpoints to open downloaded ICA files in Citrix Workspace.

I've imported the firefox.admx and mozilla.admx file along with assocaited .adml files, checked Github, checked through the GPO settings yet cannot figure out how to do the same with Firefox.

Is there a Mozila Firefox for Windows GPO ADMX setting I can use to control the "Firefox>Settings>General>Files and Applications>Applications" section to add "Content type: ica | Action: Use Citrix Workspace"?

Thanking you....

Good morning,

I'm reaching out to see if I can get some assistance with Firefox on of our network. I'm System Admin at Goodfellow AFB. I've tried searching this issues on the web and found similar issues but solutions that were recommend online have not worked for us. Yes I have uninstalled Firefox completely and installed it from scratch. I know it has something to do with autoconfig file but not sure what exactly I'm looking for. Thanks.

Hello,

As the title mentions, applying a block to all extensions via "*" by utilizing Extension Management GPO will block about:debugging.

Is there a way to simultaneously have all extensions blocked and about:debugging available?

Here's the JSON - { "*": { "installation_mode": "blocked" } }

Appreciate your time and help, - Dom

Hello,

I used to deploy add-ons via group policies - this worked like a charm: Firefox esr (91.11.0esr x64), ADMX-templates in Sysvol\PolicyDefinitions, Group Policies: User configuration, administrative templates, mozilla, firefox, add-ons --> install add-ons --> https://addons.mozilla.org/firefox/downloads/file/1234567/goodaddon-1.0.01.xpi

A few months ago, we had to change our network-configuration. We were using a proxy before, but our proxy had direct access to the internet. Now our proxy forwards everything to another proxy. Since about that time, add-on-deployment via gpo doesn't work anymore. It could be something else, but i suspect the proxy-change.

I tried to deploy unc-paths, internal websites and different syntaxes; none of this works:

• http://192.168.100.10/goodaddon-1.0.01.xpi
• http://internalwebsite/goodaddon-1.0.01.xpi
• https://192.168.100.10/goodaddon-1.0.01.xpi
• https://internalwebsite/goodaddon-1.0.01.xpi
• \\192.168.100.20\netshare\goodaddon-1.0.01.xpi
• \\internalfileserver\netshare\goodaddon-1.0.01.xpi
• file://///192.168.100.20/netshare/goodaddon-1.0.01.xpi
• file://///internalfileserver/netshare/goodaddon-1.0.01.xpi

As you can see I tried using internal sites, so that no proxy would be needed. And I also added these sites to the allowed add-on-installation-sites (computer configuration, same group policy). The sites are all accessible; if I enter these addresses as url, firefox can access the xpi-file.

I know how to pack add-ons into the firefox-setup-file; that still works. But first of all, firefox is already installed on most of my clients. Second, after a fresh installation of firefox with this self-created package, all add-ons are installed, but not activated. And I would like to restrict activation/deactivation of add-ons via gpo.

1. 1 Are there other ways to deploy add-ons in a domain-network (e.g. script-based)?
2. 2 Are there any logs where I could find out what exactly goes wrong?
3. 3 Are there any other syntaxes I could try (group policy urls)?
4. 4 Can anyone guess what the problem is (why it is not working anymore)?

Help would be very much appreciated.

Best regards.

Hello, Qualys is detecting Vulnerabilites on our Firefox ESR 91.12 Versions which were patched by MFSA2022-29.

It is showing Vulnerabilities because MFSA2022-30 lists CVE's for ESR 102.X and we are on 91.12.

Is there anywhere I can go to get a list of all Vulnerabilities on 91.X to show our Security team, I believe CVE-2022-36314 and CVE-2022-2505 are not present in 91.12 because they are not listed in https://www.mozilla.org/en-US/security/advisories/mfsa2022-29/ but need evidence

Thank You,

Hello, ever since we moved endpoints from Firefox ESR 91.13 to 102.3, it has become impossible to play any media with Firefox.

No video will play in youtube, for instance (it just loads endlessly as if it would start, but it doesn't).

Can't use radio websites either. Anything with a "play" button (video or sound) does nothing.

This has been tested with a clean profile, a clean install, after allowing autoplay in the settings.

Is there any info on what exactly changed between ESR 91 and 102 that might explain this ? There has been no system change, If I reinstall 91 instead it works again as usual.

No issues anywhere else on the endpoints (Edge, Windows), this is on Windows 10 if it makes any difference.

Tanks for any help on this.

Environment:

• Version: 102.3.0esr
• Build ID: 20220912135840
• OS: Windows_NT 10.0 19044

Issue: I had Firefox window 1 opened in virtual desktop 1, then I switched to virtual desktop 2 and open Firefox window 2 there. After using window 2 for some time, I switched back to virtual desktop 1 and found Firefox window 1 was gone. I checked `about:support` page but found no crash report there. I don't know what's going wrong.

Hello,

I'm trying to deploy Firefox with several languages.

I followed the guide on [https://support.mozilla.org/en-US/kb/deploying-firefox-language-packs].

Everything work fine until I set up ExtensionSettings policy. This policy hide and block languages menu.

After scratching my head for a while, I finally figured out how to do it. I would to like to know if an easier way to whitelist all locales and dictionaries. I would like to only control the extensions.

<enabled/> <data id="ExtensionSettings" value=' {

 "*": {
   "blocked_install_message": "Blocked by your administrator.",
   "installation_mode": "blocked",
   "allowed_types": ["extensions", "dictionary", "locale"]
 },
 "uBlock0@raymondhill.net": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi"
 },

"qwantcomforfirefox@jetpack": {

   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/file/3658805/latest.xpi"

}, "langpack-en-CA@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-en-GB@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-en-US@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-es-AR@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-es-CL@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-es-ES@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-es-MX@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-fr@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-pt-BR@firefox.mozilla.org": {

 "installation_mode": "allowed"

}, "langpack-pt-PT@firefox.mozilla.org": {

 "installation_mode": "allowed"

} }'/>

Thank you

Hello,

I am managing Firefox for a very large organization. We have several extension that we deploy using registry keys and we don't allow users to install additional addons. However, since version 102.3 I noticed some extensions that are present on the machine as .xpi files, but should not install unless a specific application is also present, are also being activated. They are enabled in the add-on manager, the information is present in the "extensions.json" and "extension-preferences.json" files. This should not happen. Is there any way to prevent the activation of these files?

Thank you!

Hello,

Firefox 102.6.0esr (x64) Firefox 108.2.0 (x64)

after implementing the bookmarks (JSON) setting by GPO policy, it turns out that an entry for Bookmarks is created in the registry and not ManagedBookmarks, which causes bookmarks not to appear in the bookmarks bar. When I manually rename a registry entry from Bookmarks to ManagedBookmarks, the bookmarks appear properly. Please let me know if I'm doing something wrong or if there really is a problem reported by me.

Yours sincerely Bart

Environment: Windows 10 22h2 clients, latest ESR build, Domain servers Windows 2016 or better.

So I followed the guide https://github.com/mozilla/policy-templates/blob/master/README.md#extensionsettings and tried to set up the config. We are using the latest ESR build but after the settings is applied I still dont have working extensions.

Here is the code

{
     "*": {
           "blocked_install_message": "Addon or Extension is not approved. Please submit a ticket to Help Desk if you need access to this extension.",
           "install_sources": ["https://addons.mozilla.org/"],
           "installation_mode": "blocked"
     },
     "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/adblock-plus/latest.xpi"
           },
     "ciscowebexstart1@cisco.com": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/cisco-webex-extension/latest.xpi"
     },
     "{d0210f13-a970-4f1e-8322-0f76ec80adde}": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/instapaper-official/latest.xpi"
           },
     "appstore-mini@feedly.com": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/feedly_mini/latest.xpi"
           },
     "extension@one-tab.com": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/onetab/latest.xpi"
           },
     "support@lastpass.com": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/lastpass-password-manager/latest.xpi"
           },
     "sweb2pdfextension.4@kofax.com": {
           "installation_mode": "allowed",
           "install_url": "https://addons.mozilla.org/firefox/downloads/latest/kofax-pdf-create-4-0/latest.xpi"
           },
     "Aternity-WebExt-12.1.4@aternity.com": {
           "installation_mode": "allowed",
           },
     "its_addons_wrap@onelog.com": {
           "installation_mode": "allowed",
           "install_url": "https://extensions.onelog.com/extension/onelog.xpi"
     }

}

I have placed the settings in HKCU but also tried in HKLM and there has been no difference. in each case I get Unable to parse JSON for Extensionsettings when checking the about:policies section and when I look at the registry I see the REG_MULTI_SZ value but when i click on it to read it I get another error message. Cannot edit ExtensionSettings: Error reading the values contents.

I tried re-entering the code and tried not listing the install URLs and even tried only listing 1 item. I haven't been able to get past this error so any help would be greatly appreciated.

Hello

I am looking for a way to disable the QUIC protocol in Firefox by GPO. I got your latest AMDX templates but I don't see the option to modify network.http.http3.enabled.

Either an AMDX template with this option or a Registry will do the trick

Thanks

in our organisation i need several domainnames to be added in network.negotiate-auth.delegation-uris and network.negotiate-auth.trusted-uris, so that sso for some webapplications is working. some are allready in the list. when i make changes to the list, everything is working ok, but when i clos all mozilla windows and restart mozilla, the changes are gone.

When looking at the ExtensionSettings page for Firefox or Chrome they both use an example that shows the registry key Software\Policies\Mozilla\Firefox\ExtensionSettings (REG_MULTI_SZ) being set to a long JSON string with every extension ID and the settings for that particular ID. For example...

{

 "*": {
   "blocked_install_message": "Custom error message.",
   "install_sources": ["https://yourwebsite.com/*"],
   "installation_mode": "blocked",
   "allowed_types": ["extension"]
 },
 "uBlock0@raymondhill.net": {
   "installation_mode": "force_installed",
   "install_url": "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi"
 },
 "https-everywhere@eff.org": {
   "installation_mode": "allowed"
 }

}

The problem with this method is that if I am installing an extension, and I overwrite what already exists in Software\Policies\Mozilla\Firefox\ExtensionSettings then all of those other settings get removed. So even if I am a non-malicious actor and just make a mistake with my installer I can easily delete every other extension's settings. Instead what I have to do is during install I have to read the current value of Software\Policies\Mozilla\Firefox\ExtensionSettings and then insert my extension's settings into the JSON blob.

So the examples that Firefox and Chrome provides do of course work, however they do not make very much sense to me. Why would it be formatted this way since all of those are additional key/value pairs and that is exactly what the registry excels at storing. So why put all of those into a single key/value instead of breaking them into multiple?

Additionally breaking them a part into multiple key/value pairs does work! So if instead of the example above I were to split them into multiple key value pairs it works just fine!

Software\Policies\Mozilla\Firefox\ExtensionSettings

   uBlock0@raymondhill.net
       "installation_mode": "force_installed",
       "install_url": "https://addons.mozilla.org/firefox/downloads/latest/ublock-origin/latest.xpi"

So knowing that this way with multiple key/value pairs works why am I bothering to ask this question at all instead of just doing it the way that makes sense to me? Well the issue is that by breaking it up into multiple key value pairs it actually overrides the other method and makes it so that all those registry settings are ignored. So it doesn't delete them but it still leaves me with nearly the exact same problem.

While I believe "my" way is superior because it uses the registry in a more common sense route, if that is not what the majority of extension developers do then it doesn't matter and I should be conforming to the other way.

As I am typing this question up I did realize just how hard/annoying it is to properly format and make it clear and digestible what the multi key/value format of the registry would look like instead of being a JSON string. So perhaps that is the reason why all the documentation puts it all as one JSON string?

Version: Firefox ESR 102.9.0 (64-bit) - Windows 10 Enterprise 22H2

Customers have been complaining for about 6 months that they can no longer drag and drop email attachments from Outlook (Microsoft Office Professional Plus 2019 - Exchange) into a Help Desk formula. I tested dragging from Outlook desktop and from the web version.

Drag and Drop works when using Edge and Chrome.

This is not a major issue, since customers can use the other browsers, but since they would prefer to use Firefox, a fix would really be appreciated.  :-)

We downloaded the GPO Templates for AD and looking to customize Firefox.

We would like to disable Forms and Autofill: Autofill addresses Autofill credit cards

Also would like to lock down so they can't reenable if possible.

We would like to do this all through GPOs if possible. I found these in the about:config: extensions.formautofill.addresses.enabled extensions.formautofill.creditCards.enabled

But again want to do through the GPO. Is this possible?

Side note while working on GPOs, I set Exceptions for the popup blocker and they are not showing up in the browser. I also filled out to remove Search Engines but they all still appear in the browsers. These two GPO settings don't appear to be working.

Hello, I am trying to create a deny all & white list only gpo for Firefox extensions.

I am using the gpo; Computer Configuration/Policies/Administrative Templates/Mozilla/Firefox/Extensions/Extension Management

I started out simple using a template which worked.

{ "*": { "blocked_install_message": "Your Company Blocked Message", "installation_mode": "blocked" }, "uBlock0@raymondhill.net": { "installation_mode": "allowed" } }

However, when I tried to add in more allowed extensions it now longer worked and was able to install any extension.

{ "*": { "blocked_install_message": "Your Company Blocked Message", "installation_mode": "blocked" }, "uBlock0@raymondhill.net": { "installation_mode": "allowed" }, "querymoid@kaply.com": { "installation_mode": "allowed" } }

We use Microsoft MDT for computer deployment. We have been installing the Standard version of Firefox for a long time with no problem. Recently we started using AD GPO Templates to configure firefox. To be able to configure certain settings you need to be running the ESR version. I downloaded the more recent ESR version: 102.12.0esr.msi file.

When deploying machine MDT to install Mozilla firefox I keep getting this error: Application Mozilla Firefox ESR returned an unexpected return code: 1618

This is the only application having issues and this issue only came up since I change the installation file to the ESR version.

This is the install command being used in MDT: msiexec /i "Firefoxesr.msi" /qn /norestart

I am posting here and not with MDT support, as this only started happening when I changed the installation file to the ESR version. Has anybody else had a problem deploying ESR version through MDT? Any help on how to fix?

I am an admin of some servers, i modify the proxy settings of firefox in a GPO, and it works, but now ont thing is that users can modify the settings of "No proxy for" in Connection Settings, then add the urls, then users can access to any web site which they want to, is there a method to disable this? thanks.