All Products Support Forum

I am using Firefox v125.0.2. When I open a PDF in Firefox it takes a lot of time to load. But, when the same PDF opened in the Edge browser it loads normally and scrolling through PDF pages renders fast. I have shared the screenshot of a single-page pdf loading taking quite a long time.

Could someone please help me with this.

It has been observed that when a user uses the Firefox browser and tries to download a DDD file, the file format is .pdf instead of .ddd. In the devtools, it was observed that the content-type is text/plain in the response to the request. I changed the content-type to application/octet-stream, but the error still persists

Every time I restart firefox, my spellchecker languages disappear, leaving me only with one - the addons are still installed, they're just not available to be selected. Even now I can't spellcheck in english. Please help.

Hi

I am running Thunderbird on WIndows 10. I have eight different email accounts, but only one profile.

This morning on startup, all accounts and folders were gone and the "open your account" tab was open.

After several hours of frantic searching on the net, I took the most recent profile "prefs-9" and used it to overwrite "prefs.js" This brought back all my local folders and saved emails.

However, the email accounts used to be Wotsit@gmail followed by Inbox, Sent, Draft etc. Now the first account name has been moved, leaving behind its old Inbox, Sent etc with the correct email count but nothing at all in the right hand pane. The account header has re-appeared amongst other account headers but with nothing in the Inbox, Sent etc.

What I need to do is make all the emails visible in the "headerless" section, and return the correct header above them.

Here is what it sort of looks like -

Inbox (3) 2100 Sent 998 Drafts

Then further down after other accounts - Wotsit@gmail.com Inbox Sent Drafts

How can I move the Wotsit header back to where it should be?

I really appreciate the help you folks offer, and the time you put in helping us mere mortals!

Greetings everyone,

I've had this problem for a while and I don't know what to do.

I had a problem where Firefox kept crashing before it had finished loading up all of my former tabs and windows and so I was given the option of opening Firefox in "Safe mode" which I did, but now Firefox only starts in "Safe mode"...

I'm running the most up to date version of Firefox.

Thank you for any help!

I always want the address bar suggestions to start with my bookmarks. Is there a way to control the results? I remember there was something in about:config previously.

I was looking for an item that would be a couple of years back in my history, only to discover that my history now only goes back a year and 3 months… Exactly, as of today, I don't know if that's meaningful. Does anyone have any idea what might've happened, and how I can restore the rest of my history? Thank you!

I'm on a Mac using Mojave, with Firefox version 115.8.

Starting with my bank's web site, my user name/password is being challenged. I can't bank. Elsewhere, where my desk top has always been recognized, I'm now forced to log in each time...and I receive an email that a new device has just logged into my account. All of this suspiciously coincides with a recent browser update. On my bank feedback it's showing as Firefox "125"...when all previous logins were recorded as Firefox "124". Help!

Hello everyone,

Why some Wikipedia pages cannot activate reading mode under Debian 12 and Firefox ESR 115.9.1, for example this English Wikipedia page on Emmabuntüs does not allow reading mode to be activated while French, Spanish and German pages can ?

See our test video on this subject: http://share.emmabuntus.org/Accessibility/Firefox_mode_lecture_non_disponible_emmabuntus_en.mp4

Is there a utility to test pages compatible with reading mode?

Or otherwise in which Firefox log file to see if a page is compatible or not?

Thanks in advance for your help.

Hello

Yesterday there was update in Thunderbird and went well. But today, Thunderbird suddenly asking for credentials and then it went totally blank as in screenshot. There is nothing at all. But incoming mails are still showing up in windows notification and it can be opened as new tab of Thunderbird. I have been searching the possible cause and solution from forum and internet, but no luck. Can someone please help me about this ?

Yesterday, whenever I tried to open Thunderbird I got a This app will not open on your PC Windows error, and Word and Excel would not work. Apparently I had some Windows 10 problems which I was able to repair with Windows Resource Protection. Thunderbird now runs, but all 2000 of my Inbox messages do not appear. If I open my Mail folder in my Profile, I see the four folders inbound.att.net, inbound.att-1.net, inbound.att-2.net, and inbound.att-3.net The size of each of these inbound Mail folders is 5MB, 9.8GB, 38MB and 20MB. So, all of the missing Inbox emails are in the inbound.att-1.net folder but they don't show up. I tried deleting the .msf file. That didn't help.

Does anyone have any suggestions?

I have a problem where if I install the packages needed to get hardware video decoding working in firefox it completely breaks YouTube playback. I can't find any info on the internet about the problem and I am having a lot of trouble with it. YouTube playback with libva-mesa-driver and libva-vdpau-driver will start stop restart start playing audio then crash with a this error every single time. I am at my wits end trying to figure out this problem and I would love help figuring out the problem I am using firefox-developer-edition as a note thanks Ozzy

I've been a Firefox fan for years. I thought I'd try Thunderbird. I'm in need of some help please as I'm going round in circles.

I am trying to link my btinternet email account to Thunderbird. Thunderbird cannot do it automatically so I have to enter the details manually.

I have all the right settings according to BT: Incoming POP 995, SSL enabled but not StartTLS. Outgoing Port 465, SSL enabled not StartTLS. mail.btinternet.com is used.

The User Name and Password are correct but Thunderbird cannot connect to the account. There are no Firewall issues.

Something is happening because BT have notified me of potential unauthorised access and I have to reset my BT password. Even when I enter the new BT Password Thunderbird cannot link to the account.

Any suggestions as to what might be causing the problem? Thanks.

I am asked to get a new password from my mail server (AOL) every day when trying to send messages. Have to log on to AOL, ask for app password, enter at Thunderbird. DAILY!

Hi

Got an earlier version of Thunderbird at home (and sorted fine) but I'm trying to sort the view for folders and sub-folders to be all the same on my work PC i.e Sort By: Date, descending & unthreaded.

Apart from going through every folder/sub-folder, is there a quick way to set this in version 115.10.1 ?

Looked at online help/videos but they refer to older versions.

Issue summary: I lost over 100 sites listed in the Cookies and Site Data section when I simply removed a few websites in the Enhanced Tracking Protection section.

Under the Browser Privacy section, the two subheads, "Enhanced Tracking Protection" and "Cookies and Site Data" serve two distinct purposes—as I understand. Enhanced Tracking Protection will automatically add the URL of a webpage (that you currently have open) to the Enhanced Tracking Protection screen whenever you disable the shield in the search bar. This will turn off tracking for that website until turn you it back on. You can also manually add websites to the Enhanced Tracking Protection screen if you have mulitples to add. This whitelist will stay active until you delete them or click on the shield to turn it back on.

The Cookies and Site Data section further down, allows you to create a list of sites that you want to BLOCK, ALLOW FOR SESSION, or ALLOW cookies and site data to be used, and retained or not. This differs from the Enhanced Tracking Protection section.

Today, I wanted to delete one of the websites listed in the Enhanced Tracking Protection, and did so manually. But since there were only a couple listed (I rarely add to this screen), I simply clicked on "Remove All Websites" instead of "Remove Website." Unfortunately, when I went down to the Cookies and Site Data list (which I use all the time) to add a new URL today, my entire list was gone! I did not remove or enter anything in the Cookies and Site Data screen today, prior to using the Enhanced Tracking Protection screen.

As you can guess, I am sick because I had over 100 sites listed in the Cookies and Site Data section, and lost them all when I removed the few websites in the Enhanced Tracking Protection section. I don't know why or how this happened, but it is worth noting that I did just update Firefox this morning to vs 125.0.2 (from 124.0.2). My list is gone, but does anyone have a reason why it happened and is there a way to prevent that in the future? Or is it some kind of bug with the latest release or an earlier one. (I haven't opened the Enhanced Tracking Protection screen for a long time, so it could be from any past release.) Sorry I don't have more info than that. Any solutions would be appeciated.

Hi,

About a month ago I accidentally activated the "Delete all but the most recent 2000 messages" option for one of my mail account in Thunderbird (15.10.1 (64-bit) on a MacBook Air). Luckily our local support were able to restore the affected folders. BUT - every time I opened the restored folders in Thunderbird, all the restored messages would disappear again. Correspondingly, the support team can see at this time large numbers of messages being deleted.

I've tried to delete the affected mail account from Thunderbird - didn't help. I've hidden my profile and started Thunderbird from scratch, set up the mail account again (so there should have been no leftover information from any previous instance of the account) - didn't help. I can see that whenever I open a folder for the first time, Thunderbird says "Compacting" - this is even though I have "Always ask before compacting" set. Even after I turn off automatic compacting for space saving >20MB, Thunderbird still compacts when it first sees a folder.

I have verified this behaviour by connecting to the same mail server using alpine - I see messages flagged for deletion in the restored folder; as soon as Thunderbird touches the folder, they disappear (even though no compacting should be happening and I should be prompted before it does, see above). Conversely, if I remove the "to delete" mark from the messages using alpine and then open a folder in Thunderbird, the messages are visible there.

From my understanding of what Thunderbird should be doing when compacting (or rather when not compacting), I would say the behaviours I've seen are rather significant bugs. But if I've misunderstood and there is some other way to stop Thunderbird from purging messages marked for deletion, I would be grateful for any advice.

Many thanks in advance for your help.

Bug forever (years, versions, reinstallations).

Failure by filters whose action is to DELETE. As stated in subject. Uncomplicated.

Other filters work (they distribute msgs into specified folders).

I am using the apt version of firefox v125.0.2 (64-bit). I do not have a dedicated GPU - I use my intel core's internal gpu only Intel Corporation HD Graphics 620 (rev 02).

I used to play this game named narrow.one, which before I reinstalled the mentioned libraries, was working fine except for crashing a few times. I thought these libraries were causing some issue, so I tried reinstalling them.

I reinstalled the libraries using: `sudo apt install --reinstall --fix-missing libgl1* libegl*`

After installation, I start getting that error. So, I tried reinstalling firefox (using the same command), and then restarting the laptop - but of no use. Chrome seems to be running WebGL, including the game.

In firefox, on the https://get.webgl.org/ page, I see Hmm. While your browser seems to support WebGL, it is disabled or unavailable. If possible, please ensure that you are running the latest drivers for your video card.

After that, I also tried reinstalling `libopengl0` and `libglu1-mesa` and `intel-microcode`, but of no use. Running although, `sudo intel_gpu_top` and then chrome, it seems that the GPU is in use by chrome as well.

I then go to about:support. It shows me the images I have attached. Reading the logs, there several `blocklisted` values in `Decision Log` section. I suspect that's the cause of this issue, but then I don't know how can I un-blocklist the blocklisted things, and even after that, why does Chrome runs webgl if these are blocklisted?

Running `glxinfo -B`, I get the following: `name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer):

   Vendor: Intel (0x8086)
   Device: Mesa Intel(R) HD Graphics 620 (KBL GT2) (0x5916)
   Version: 23.2.1
   Accelerated: yes
   Video memory: 7697MB
   Unified memory: yes
   Preferred profile: core (0x1)
   Max core profile version: 4.6
   Max compat profile version: 4.6
   Max GLES1 profile version: 1.1
   Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel OpenGL renderer string: Mesa Intel(R) HD Graphics 620 (KBL GT2) OpenGL core profile version string: 4.6 (Core Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL core profile shading language version string: 4.60 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL shading language version string: 4.60 OpenGL context flags: (none) OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 23.2.1-1ubuntu3.1 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20`

I do not know much about OpenGL, but reading the above stuff, I suppose my GPU is in use and also has a compatible driver (although I am not sure).

Also, running `glxdemo`, `glxheads`, and `glxgears` seems to be rendering stuff.

Should I reinstall firefox after purging it first? Please help.

Thanks!