Firefox Community Forum

Google search no longer works on Firefox. Other browsers have no problems. Changing the default search engine on Firefox works (eg Bing), BUT. It can now find Google Maps, but Google Maps cannot find a location, because it uses a Google search. I tried the fix in about:config, but it had no effect.

Every time I open Firefox after closing it, I get the message below. I can click the button to restore session and it works every time. With each update, I hope to never see this message again, but after installing a new version on Ubuntu today, I see the same familiar message. This is not linked to a computer, or an operating system because I've seen this on both Ubuntu and Mac. If Firefox could literally just click the button that would be awesome.

Sorry. We’re having trouble getting your pages back.

We are having trouble restoring your last browsing session. Select Restore Session to try again.

Starting with Firefox version 120, you can set Firefox to automatically launch whenever you start or restart your Windows computer. https://support.mozilla.org/en-US/kb/open-firefox-automatically-when-you-start-computer

The browser shows opt-in prompt for the user to easily setup this behavior. However, I do not want to do this.

When I click "No thanks", the prompt goes away, but couple days later, it returns. I guess that an update resets the prompt status.

Is there a way to permanently disable this opt-in prompt without allowing Firefox to start automatically with the computer?

Installed Firefox 122 in a new Windows 10 installation and added some extensions (e.g. Gesturefly, Update Scanner, uBlock Origin, Uppity). These pinned fine on my old installation. But I cannot find how to pin them on the new.

All the help I have found Googling, or using search here, says go to the Add-ons Manager page and right-click the extension and use "pin to toolbar". Alternatively click the extension and click the gear icon and use "pin to toolbar". But when I right-click there is no pin to toolbar context menu entry. If I left-click the gear I get "Check for Updates, View Recent Updates, Install Add-on From File, Debug Add-ons, Update Add-ons Automatically, Reset All Add-ons to Update Automatically, Manage Extension Shortcuts". If I right-click the gear I get a line of icons (left, right, reload, star) followed by "Open Image in New Tab, Copy Image Link, Email Image, Save Page As, Select All, View Pate Source, Inspect Accessibility Properties, Inspect (Q)". If I right-click the extension in the Add-ons Manager page itself, I get a very similar list. In no case is there a pin to toolbar option.

How do I pin an extension, given the above? What have I messed up?

Support,

The USPS website does not work properly with Firefox!! The Home page loads okay but there are multiple other issues with links not working. For instance all of the links under Quick Tools do not work except this one: https://www.usps.com/manage/po-boxes.htm. Other things don't work either.

Everything works fine that I tried with Google Chrome though! Please address soon.

Thanks

My system broke during an update. Now I want to import my old Firefox userdata, but everytime I try to use the old data firefox just forces the creation of a new profile?

Is it completely impossible to recover data not created with the same firefox version?

I have Yahoo as my home page and usually search from it starting out. I noticed, however, after the last update or two in the last week that when I hit search, it opens the search results in a new tab. It didn't use to do this, but I can't find any Firefox option to make the searches stay in the existing tab. Can anyone help with this? I don't think it's Yahoo's settings, because I'm not signed into it. It seems like the Firefox update created this new behavior.

I'm not sure how this happened, but one of my firefox web pages keeps zooming in only on one website and the zoom refuses to reset no matter what I do.

For reference this is wikipedia. Every time I load a wikipedia page it loads zoomed in to 210%, which I will then have to reset to 100% in order to read the page properly. If I for some reason click on a link on the wikipedia page that goes to another wikipedia page, the zoom will reset again to 210%, which I will then need to reset once again. This happens also whenever I switch from the wikipedia tab to another tab and then switch back again. I do have an addon that changes wikipedia slightly (the Wikipedia Vector Skin addon) but disabling this addon doesn't fix the issue.

I went into about:config several times already and changed different settings to try and make it stop, but nothing so far has worked. I've tried resetting layout.css.devPixelsPerPx to 1.0 and back again to -1.0 and it makes no difference. I also tried changing browser.zoom.full to false and it keeps happening. Changing browser.zoom.siteSpecific to false does fix the issue, however it also resets the zoom I have on other websites that I want to keep, so it's not an ideal fix. I also cleared all my cache and cookies and it changed nothing.

Does anyone have any idea on why this keeps happening only with wikipedia, and how I can get this to stop happening? I assume there must be some internal setting that would need to be reset in order to fix this, but I don't know how to do it or where I would even go.

Hi. I am running a 3 monitor setup and I like to keep open quite a few tabs. And two windows of Firefox. So two Firefox instances with several tabs on each. But because it eats a lot of memory, I have to close and reopen Firefox from time to time. And to my annoyance, sometimes it "forgets" about one of the windows. So opens only one instead of both. Therefore I loose some quite important tabs. Any suggestions on how to fix this? Thank you.

Firefox is my default browser, but it does not allow me to log in to specific websites. For example, ihg.com, when I click the sign in button nothing happens, I just have a little note at the bottom left "javascript:void(0);" Another example, dutchcrafters.com , when I click Log in with Gmail, nothing happens.

I have tried removing all the content blocking extensions (privacy badgers, ublock origin, etc.), did not fix it. I have tried a firefox refresh, did not fix it. I have tried uninstalling and reinstalling firefox with several device restarts, did not fix it.

I know this must be a firefox specific problem because microsoft edge work perfectly for both of these examples. Any other suggestions to fix this firefox issue?

I have been trying to solve this problem on and off for about a year now, but 99.99% of the time I try to access https://en.wiktionary.org/ , I get the following error: Secure Connection Failed An error occured during a connection to en.wikitionary.org PR_END_OF_FILE ERROR Error code: PR_END_OF_FILE_ERROR

• The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
• Please contact the website owners to inform them of this problem.

Learn more... Try Again

I have NEVER gotten this error message for any other website. And the strangest thing? Sometimes I CAN access Wikitionary with zero problems, but this phenomena tends to only happen when I attempt to access the website very late at night or really early in the morning. I cannot think of a single thing I have done differently when this happens.

By the way, I am able to access Wikitionary from Microsoft Edge just fine, it is ONLY Firefox where I have this problem.

Today a website told me I needed to enable JavaScript in order to continue, despite the fact that it is enabled. At first, when I received this message, I turned off the "NoScript" extension and tried again, but the website still gave me that same message. So then I went to the about:config page. and it showed that JavaScript is enabled because it showed a value of "true". This sort of thing has happened more than once in the past. I'm forced to go to another browser such Microsoft Edge or Chrome, where I do not encounter this problem. Why is this happening in Firefox, and what can I do about it? My operating system is Windows 10 Professional, and if you need any other details, please let me know. I will appreciate your assistance.

I have the HTTP_PROXY, HTTPS_PROXY and FTP_PROXY (and their lowercase counterparts) exported and then the firefox binary is started from the shell script. The settings in firefox say it will 'Use system proxy settings'. Nevertheless I do not see the proxy being used as I can not access the web pages that need the proxy. The 'about:config' also does not show that firefox picked up any proxy related information from the shell environment.

I know the proxy address is correct because if I use brave browser instead of firefox (same shell script that launches brave) I can reach the web pages behind the proxy as expected.

I am running v122.0.1 on a Mac and since the last update if I open a Facebook Messenger message which pops up at the bottom of the screen clicking the minimise or close doesn't do anything and the message stays on screen The only way to get it to close is to log out of Facebook and then log back in again. Is this a bug in this release?

Hello, as of the last week, my Firefox wont open any Excel 365 scripts, pop-up windows are enabled, I have tried with my Firefox account in multiple different Windows 10 PCs - none worked, there is no problem in other browsers.

What could be the reason?

Thank you

I noticed my laptop was being slow, so I looked at the memory usage. Firefox was using a whopping 5GB of memory on Windows 11. I then looked at about:process and it reported that extensions were using 4GB. I disabled each of my extensions and it still said it was using 4GB of memory. I then uninstalled two of them and re-enabled some extensions and it dropped to 781MB. This is still to much in my opinion, and I want to know how to figure out which extension is being so wasteful. Even a technique on how to figure it out would be appreciated.

Often I open a new tab & it's bugged. (It displays fine but the "right click" menu doesn't work.)

The fix is right clicking the tab itself (at the very top) & then clicking "reload tab".

Is there a hotkey for this instead? I hoped ^{f5} would work (control f5) but it didn't seem to.