Thunderbird Tekoha Aty

Had a 'Onetel' e-mail address for years and have had the same issues with it a few times where as it just 'drops out.

Have been on here before and received good advice. Last time it dropped out apparently because it didn't know the servers name and that was it it didn't want to play any more. I am determind to get this working again so that I can send from One Tel. It has a Forwarder to another account so I still get the messages. Also have gone in via TalkTalk (who apparently now own Onetel and can receive the messages on my phone (iPhone13) but very hard to reply from it. Any help to get this account up and running from my Desktop gratefully recieved.

Thanks, Dick.

I just updated to version 140.0 and now my subfolders are out of order. Is there a fix for this, short of fixing it manually? I miss how they were automatically alphabetized. That went away when manual reordering was implemented. I can't grab a bunch at the same time and move them, since the order is so messed up.

I exported up my Thunderbird data to an external hard drive from my PC in Croatia which I have been using there for the past year.

I am in South Africa now for a few months and imported the data to my laptop with a new Thunderbird installation.

I have 5 email accounts on one domain, and 1 on another domain.

When I checked for new mail, I was asked for passwords for the 5 accounts on the one domain, and after entering this, the new emails came through fine.

However the one email account on the other domain did not ask for a password, and when I connect I get a message: "Connection to server xxx@xxx.com was reset" I can send emails with this account, but cannot receive any.

Interestingly, I have a previous installation on a desktop PC here in South Africa with the same email accounts. I tried that specific email account and it connects perfectly. The settings are exactly the same.

How do I solve this on my laptop?

There were prob 20 or so, but now just blank tabs. My In Box and incoming email still show OK and I can read those in a new tab. but what about the old ones? And if I cannot recover, how can I remove those blank tabs. Deleting the usual way does not work.

On Windows 10. I wonder if Co Pilot has something to do with it

Thanks Tealeaf

Hello,

My Thunderbird is on 140.0ESR - just updated yesterday. This morning I am noticing that when I open an email to read, and then close it, my inbox automatically scrolls from the top of the box to the place where that just read email is located. It used to just close and I could open the next one - now it goes through this momentary, fast scroll and then stops at the most recently read. It doesn't seem to matter if there are unread messages in the mailbox - it does the same thing when all messages have been read.

Very strange behavior - and just started with 140.0ESR.

Any ideas appreciated. Thanks!

I have tried searching in my emails in different ways but always get a blank response/screen, which makes no sense - in one inbox or the other, in unified inbox, trying many different words... Using a Nokia Android, if this is relevant .

Hi all. Is it possible to send 400 mails and attach different .pdf files.? I have the e-mail list in a cvs file, and 400 *.pdf files placed in a folder. I know that it might be done i Google mass mail, but I would prefer to use Thunderbird the same way. Does anyone know if this is possible?

In thunderbird. a new shot email is drafted and I hit send drop down says waiting for draft folde r to retain a copy and never sends the email and doesnt appear in sent fold?? is my drafts folders overfull of ?? Regards Sven

Thunderbird 140.0 (64-bit)

I cannot reorder some folders within my Local Folders. It only happens with some folders - =not all of them. I can drag and drop the folder to the location I want but for some folders one of the following things happen.

1. The folder immediately return to its original location, that is, I can't move it at all or 2. I cannot drop it where I want but I can drop it in a nearby location and then shuffle the folders around it so it ends up where I want it. For example, if I want to put folder Y between folder X and Z, I can't drop it in that location but I can drop it before folder X (or after folder Z, or in any other nearby location) and then move other folders around so I end up with the correct X,Y,Z order.

In ALL cases, when I exit Thunderbird and then restart it, the folders re-appear in their previous locations - that is, as if I hadn't moved them at all.

This only happens with some folders - and not necessarily the same folders each time - sometimes folders which were in their correct location re-appear somewhere else, but this is a rare event and I've only observed it a couple of times. I have disabled 3rd party backup software in case this was reverse synchronising the files - it was putting the old versions back (a long shot!) but the problem persists.

I have done a clean re-install and are using the default locations provided during the installation.

I could try to create new folders, move the emails to those folders, delete the existing offending folders and then rename the new folders to the desired names and then try move them to the desired locations but this is just a hack and maybe it won't work.

Hi all,

for signing PDFs with my SMIME certificate, another 3rd party software (LibreOffice) uses the Thunderbird profile folder (nssdb stored which is located there). After some investigation by myself, it could be a problem within Thunderbird certificate management itself.

Situation: I've a current and some outdated SMIME certificates for my mail address. But all for one mail address.

Because the current SMIME certificate is not accessible for LibreOffice, I removed temporary all of my outdated SMIME certificates from Thunderbird by the builtin certificate management, i.e. the list of my personal certificates was set to one entry (=the current certificate) in Thunderbird. But even then, LibreOffice lists only an outdated certificate (which is not visible anymore in the Thunderbird builtin certificate management).

Therefore I've checked with certutil the nssdb entries in the Thunderbird profile folder. Surprisingly, there is an outdated SMIME to my mail address contained (no further, even not the current one). Even after removal of those outdated certificates via the builtin certificate management. The current certificate is never listed; always only an outdated one.

This looks like a difference between builtin certificate management and nssdb within the profile folder (or may for another storage location of the certificates)?

certutil -L -d ~/.thunderbird/myprofilefolder --email mymailaddress

Thanks in advance!

Environment OS: Ubuntu 24.04.2 LTS Thunderbird: 128.12.0esr (64-Bit)

How can I stop Thunderbird from displaying its own advertising/donation page on my browser when I open Thunderbird? It opens this page on my default browser, no matter which is chosen: https://www.thunderbird.net/en-US/thunderbird/128.0/whatsnew/?locale=en-US&version=128.6.1&channel=esr&oldversion=102.8.0 If the browser is not open, it will open it.

This is the result of trying to keep Thunderbird from automatically upgrading. In newer versions, the option to choose not to upgrade has digressed from difficult to not available. It did such an upgrade, so I de-installed and reinstalled my original version, only to have this issue.

I was very satisfied with my old version AND see no need for new any of the "features" or look. And, especially, once such a setting is made, don't want Thunderbird, or any other application or app, changing it back. This is a violation of privacy at best.

Worse yet, Thunderbird is attempting to penalize the customer for making a choice on their own computer by infecting the machine with nuisanceware.

All my emails stopped receiving new emails yesterday when I had to go change my password on Google. Google has my on hold for 2 days for verification.

However, I have other non-Google emails that are not updating.

I also tried to create/add a new email account: EarthAlert1@outlook.com, and is stuck "Looking up configuration"

I have a .ics I have gotten from CVS and when I open it, Thunderbird says there are, "No importable items found in the file."

This is the content of the file, with the address changed to protect my identity

BEGIN:VCALENDAR VERSION:2.0 BEGIN:VEVENT CLASS:PUBLIC DESCRIPTION:Your appointment is booked. LOCATION:123 FAKE ST. FAKE TOWN XX 55555 SUMMARY:MinuteClinic Appointment TRANSP:TRANSPARENT DTSTART:20250709T160000Z DTEND:20250709T163000Z END:VEVENT END:VCALENDAR UID:8oqunp8c90w DTSTAMP:20250708 PRODID:www.cvs.com

I'm using Thunderbird Version 140.0 (64-bit)

How to make custom colours permanent? TB used to keep custom colours, but doesn't appear to any more. The colours offered are mostly not readable for text, so they have to be made a custom shade; but TB doesn't do that any more.

I have 25 filters set up in Thunderbird and all work as expected. However, any mail I receive that is not caught by one of my filters is directed to the folder I have set up in the last filter in my list. Why? Shouldn't any mail not caught by a filter just remain in the inbox? How do I get this unwanted behavior to stop?

why is everything going to trash in thunderer but not in Comcast.net email what do i do o i eed to reinstall it and uninstall it

can not  do restore point

Hello, I apologise if this subject has already been discussed somewhere but I haven't been able to find anything that specifically answers my question.

I run Thunderbird on two desktop systems running Windows 7 Professional and a laptop running Windows 10 Home. The desktop systems are running Thunderbird 115.5.1 (32-bit) and the laptop 139.0.2 (64-bit).

I use a file synchronisation program to keep my data on all three systems in sync, which also acts as a backup. I also use it to back up my main desktop system to a portable hard drive.

I should like to know if it is possible to include Thunderbird data in the synchronisation process, specifically mail messages in various folders (e.g. Sent, Read - including subfolders, Deleted etc.), Address books and Calendar data. I have successfully transferred the message files and their .msf companions. The sync software detects and updates changed files and this seems to work smoothly but I haven't been able to do this with Calendar data or Address Books. As far as I can see this can only be done by exporting the data to iCalendar or csv files then importing to the other systems which is obviously not convenient for something that I am doing on a frequent, regular, basis.

A final problem I have encountered relates to message filters. I have not been able to find any way to copy these to the other systems. Copying msgFilterRules.dat doesn't work and I can't find any way to export the filter data.

I should be most grateful for any assistance you can offer.

Regards, M. J. Thompson.