Thunderbird Support Forum

Hello, All

I need major help, please.

I am getting the attached messages when trying to send an email. Thunderbird worked perfectly yesterday morning, but then would not send any emails. I get emails, but cannot send from my 2 accounts.

I am on the latest version of Thunderbird, Supernova 115.10.1

Also, I cannot find out where to change my password for the accounts, because at times I need to fill in a password. I can't find it.

Thanks in advance for any help.

Best, Leslie

I have had to Restore my laptop. Since I have I can not seem to separate my email accounts. I wish them to be kept separate because I use different 'Signatures' for each account. Is there a way to separate the accounts in Thunderbird? If not How do I delete all the email accounts connected to the main email account, without affecting any email accounts outside of Thunderbird so that I can then add them individually?

Hello

Yesterday there was update in Thunderbird and went well. But today, Thunderbird suddenly asking for credentials and then it went totally blank as in screenshot. There is nothing at all. But incoming mails are still showing up in windows notification and it can be opened as new tab of Thunderbird. I have been searching the possible cause and solution from forum and internet, but no luck. Can someone please help me about this ?

Hello, I did look for related posts but found nothing close enough to this so I thought I would create a post. I don't ever recall having this issue before v102 was introduced but now it happens once in a while but not always.

If I am in the inbox of my main mail account and choose to delete a message, it goes away and then reappears almost immediately. There is a box that shows up at the bottom right of the screen that says: The current operation on inbox did not succeed. The mail server for account (my main mail account is shown) responded: UID MOVE failed. This account is in Canada on the Bell Canada network so perhaps it is an ISP issue?

I have 3 mail accounts set up - all IMAP. If I close TB and reopen it, the message is gone as if it required the program to close in order to complete the delete request.

If anyone has experienced this and has any suggestions or tips, it will be greatly appreciated. - Thanks, Mike

I'm trying to use Thunderbird to access my work emails directly. They use Outlook Office 365, which I can use the webmail version of just fine, but a year ago they upgraded to Oauth2 and MFA and for the life of me I cannot get any version of Thunderbord to work with it anymore. I can send an email, but I can access any email on the server. Weirder still is the error console message suggest the program thinks I cancelled my password entry;

"Loading failed for the <script> with source “chrome://global/content/netError.js”. neterror:128:4

NS_ERROR_ABORT: User canceled primary password entry"

NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 3 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 Some cookies are misusing the recommended “SameSite“ attribute 5 Not showing popup notification password with the message Save login for microsoftonline.com? browserRequest.js:12:13 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 LoginRecipes: getRecipes: falling back to a synchronous message for: https://cc1.azureauth.duosecurity.com LoginRecipes.jsm:297:11 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 A form was submitted in the windows-1252 encoding which cannot encode all Unicode characters, so user input may get corrupted. To avoid this problem, the page should be changed so that the form is submitted in the UTF-8 encoding either by changing the encoding of the page itself to UTF-8 or by specifying accept-charset=utf-8 on the form element. frameserv-form.js:1:64 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 LoginRecipes: getRecipes: falling back to a synchronous message for: https://api-ce86e224.duosecurity.com LoginRecipes.jsm:297:11 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 3 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] 2 OAuth2.jsm:171 A form was submitted in the windows-1252 encoding which cannot encode all Unicode characters, so user input may get corrupted. To avoid this problem, the page should be changed so that the form is submitted in the UTF-8 encoding either by changing the encoding of the page itself to UTF-8 or by specifying accept-charset=utf-8 on the form element. form-response.js:1:65 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 NS_ERROR_NOT_IMPLEMENTED: Component returned failure code: 0x80004001 (NS_ERROR_NOT_IMPLEMENTED) [nsIRequest.name] OAuth2.jsm:171 Loading failed for the <script> with source “chrome://global/content/netError.js”. neterror:128:4 NS_ERROR_ABORT: User canceled primary password entry

I have been struggling with slowness in Thunderbird in recent months (Windows 11, mid-range Lenovo laptop). There is often a distinct lag during even the smallest operations.

Examples are: selecting an email, closing a tab, typing, calendar events editing.

TB process in Windows usually uses 1000MB RAM. RAM is around 60-70% usage usually. I never have the same slowness issues with other applications.

I tried quite a bit: safe mode testing, removing extensions, compacting folders and more tips. I ended up removing Thunderbird and my profile entirely, and reinstalled the latest version with an empty profile. I just set up my Gmail and other email account. No extensions installed, yet still the same issue.

Could it be that something is still there from a previous install, if I removed my profile?

I've been using Thunderbird in Linux and Windows for years with moderate issues that I was able to resolve, but am now really puzzled. Please help.

So running thunderbird 115.10.1 (64-bit) and more and more issues:

• the app keeps getting non-responsive for long period of time, to fix this I have to force quit the app.
• at times when composing an email the app freezes where no typing occurs for seconds or typing is very slow or after typing awhile the text suddenly appears.

Seems to be happening more and more trying to figure out how it can return back to it's rockstar state when it was <99 version.

any help would be appreciated.

Just switching between inboxes can cause up to a 10 second delay with Thundebird "not responding" with the spinning wheel. It has been like this for the last few laptops I've had and through all the updates and I am getting ready to call it quits. I did a performance recording of me just clicking through the different folders and then it locks up on one. You can see it here https://share.firefox.dev/3WlrRi9

I am using a primary gmail imap account, an office 365 imap account, and another imap account from an ISP.

On Win 10 LTSC, CPU: 16 x 11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz @ 2304 MHz 10240 KB Cache, MEM: 65277 MB, 60% (39120 MB) free, GFX: NVIDIA GeForce RTX 3080 Laptop GPU 16192 MB

I understand the basic differences between unread folders and unified folders what I don't understand is why two of nine my accounts are listed in both unified folders and unread (see circled in red) how do I remove the two accounts from unified folders or

add more to it
and what makes it confusing is that the subfolders aren't the same when listed in unified or unread

This is something I've never encountered, since I hardly ever go to the Sent folder except to look at something I sent. But this was a different task.

I've had a series of emails from a friend, that my wife wanted me to forward to her so she could see them. So I went to the Sent folder, and forwarded 3 of those emails to my wife. Then she told me she only got one so I went back to Sent and thought they would be at the top of the list, 1-2-3, but that was not what I found. Since those emails were each part of several different threads in the back and forth with my friend, it took me a long time to figure out which email to pick off and resend. I made sure I was sorting them by date, descending, but was bewildered that the listing had the ones I wanted embedded (see screenshot, with the ones I just sent highlighted in red)

So my question is, is there a setting where I could tell Tbird to sort strictly by send date?

Hi

Got an earlier version of Thunderbird at home (and sorted fine) but I'm trying to sort the view for folders and sub-folders to be all the same on my work PC i.e Sort By: Date, descending & unthreaded.

Apart from going through every folder/sub-folder, is there a quick way to set this in version 115.10.1 ?

Looked at online help/videos but they refer to older versions.

hi all guys ... I'm experiencing several issues with oauth2 authentication, and I never had any issue before February the 2024 ... at the beginning the only account I have was not working was a microsoft account, so I thought it was "because of microsoft restriction"

but now, little by little, all my accounts requiring oauth2 authentication are failing, and I don't know were to check ...

I do NOT have any httpd/apache server running on localhost

I already tried changing things like general.useragent.compatMode.firefox or network.protocol-handler.warn-external.http network.protocol-handler.warn-external.https

I also created another blank profile ... but again ... not way to make it works ...

cookies are permitted ... javascript is enabled ...

the result is always the same ... a blank page when I try to do any oauth2 authentication ...

if I manually copy/paste that link in Firefox/Chrome it perfectly works, so it's not a network connection issue ...

from what I can understand, it seems to be related to the "built-in browser" in thunderbird, that for some reason does not work "as expected" ... If I try to click on any link for example in the settings page

like the "learn more" link of this option Send web sites a “Do Not Track” signal that you don’t want to be tracked "learn more" thunderbird does NOT show anything ...

something is broken, and I can NOT understand what it is ...

is there anyone with some good advices?

please let me know

thanks in advance

Stefano

I am using TBird v115.10.1 and I need to be able to EXPORT my contacts to an Excel .CSV file. My version of TBird does not offer any customisation of the Export function.

Hi,

I do like how I can change the toolbar buttons that Thunderbird shows when I open Thunderbird. That is, I other mouse button click on the toolbar and select "Customize." I have a panoply of buttons to choose from, to arrange as I wish on the toolbar.

But, when I am reading an email, the buttons I see on the top left of the email window are: "Reply, Forward, Archive, Junk, Delete, More" (in Settings, I have "'Open messages' set to 'in a new message window'."

I have not been able to find a similar "Customize" ability for the toolbar of the message window.

Is there such an ability?

The reason I ask... I'd like to have similar control over that toolbar to that I have on the other Thunderbird toolbars. But I cannot find the appropriate Customize option.

What am I missing?

thx.

(Thunderbird 115.9 on Linux Mint, 115.10 on Windows)

I've recently upgraded Thunderbird to 78.14.0 and Nostalgy to 3.4.2. Nostalgy is an essential add-on for me, but it's not working the same as in earlier versions, and I hope someone can help with these problems. Or should I ask Alain Frisch, the author of the add-on? 1. Using S to move (or C to copy) an email to a selected folder works when the email is closed (but highlighted in the Inbox or wherever) but no longer works when the email is open. Earlier versions worked when the email is open, and it's a huge drawback for me that it doesn't work that way now. Am I missing something? 2. The command G (go to the specified folder) does not appear at all when invoked from within an email. When the email is closed G provides the expected list of folders, but focus does NOT move to the selected folder. Again, am I missing something?

Grateful for any help.

Lindsay Graham