Thunderbird Support Forum

I am moving Thunderbird to a new PC, old was Win 10, new is Win 11. I installed Thunderbird on the new one, same version 115.10.2 though this is now 64 bit, old was 32 bit. I followed the instructions to move the profile by copying the Thunderbird folder onto aUSB stick then copying it to the new computer. The address book is there, but the local folders I had are not. Looking inFile explorer, I see that the Local Folders folder is there which contains all the folders I had, all populated, but there is also a Local Folders-1 there which does not, and this is the one Thunderbird is using. If I delete this folder, next time I start Thunderbird, it creates this folder again. I have obviously done something wrong, but cannot see what it is.

I'm unable to send any emails from account on Thunderbird. This just started this week. All send attempts generate this Send Message Error:

Sending of the message failed. An error occurred while sending mail. The mail server responded: Please turn on SMTP Authentication in your mail client. syn-076-088-235-065.res.spectrum.com ([192.168.1.25]) [76.88.235.65]:51343 is not permitted to relay through this server without authentication.. Please check the message recipient

This error for every recipient I typically correspond with. I have my same email account loaded into Outlook on another pc and I can send emails to all recipients without error from Outlook.

Help please.

Hi,

I've been a Thunderbird user since the days of Eudora ;-) and have a configuration question.

When you forward or reply to a message, Thunderbird currently does this: <sender> wrote on <date> <time>:

  forwarded message text

Is there a way to change the preamble line, or is it hard-coded?

Thanks in advance for any pointers.

In the previous version, there was a search box on the toolbar. After the upgrade, it disappeared. How can I restore it?

I tried to customize toolbar but there is no search box in the window of available controls.

In the image mu mailbox shows the number of unread messages 234, the total number of message 1003 and the storage used 77.9 MB. I set tese options using a little button and then foolishly clicked another little button that hid the option to choose what to display. I am unable to turn that second button on again and so cannot comntrol the display of inbox usage. How do I turn that button back on? Thanks for any help.

115.05 when I started.

I typically open Thunderbird about once a month, download my emails from a hosted website, do some clean up, write some emails, close Thunderbird, and do the same about a month later.

Today I opened Thunderbird, saw that it was downloading around 400 emails in the lower left corner, and waited patiently, as per usual. When "done", however, none of them showed up in the main window. The latest email did not change, was still from around a month ago. When I ask Thunderbird to Get Messages it says there are no new emails to download.

I restarted Thunderbird several times, no change.

I then upgraded to 115.10, hoping this might fix the issue, but it has not.

Since restarting Thunderbird, 2 new emails have come in and are showing correctly, but none of the initial 400 emails "downloaded" today are showing anywhere.

I repaired the Inbox folder (right click > Properties > Repair Folder), no help. I renamed the "Inbox.msf" file and had Thunderbird rebuild it, no help. I renamed the "global-messages-db.sqlite" file and had Thunderbird rebuild it, no help. View Ignored Threads does not help. View > Threads > All is selected. Emails are not in the Trash folder, or any other folder.

All of the initial batch of 400 emails - and the emails I had previously opened - just disappeared.

Opening up the Inbox MBOX file directly, I can see that these 400 emails were never actually downloaded into this file. Not sure what happened.

Opening up my remote email host, I can see that those 400 emails are still there, to the exact point when I last closed Thunderbird.

Asking Thunderbird to download new messages does not download these remote emails.

How do I reset Thunderbird to start the process over and re-download these emails again? Part of TB seems to think it's already downloaded these emails, while another part of TB never actually did.

Does anyone have any idea what to do here?

Somebody thought that it is a GREAT idea to make drag-n-drop cursor a GIANT rectanglular thumbnail of the emails being dragged.

No, this is a horrible idea because that thumbnail covers the target of the drag-and-drop.

Either REVERT this IMMEDIATELY or let us know how to disable and revert to the simple drag-n-drop mouse cursor that does not obstruct the target of the drag.

And in the future AVOID any GUI changes that are not ABSOLUTELY NECESSARY. With these poorly thought through, extremely annoying changes you are only causing damage and aggravation.

I am setting up a new Windows 11 Computer and am trying to install Thunderbird. I have downloaded TB (Thunderbird Setup 115.10.2) to my Download Folder. I double click on that file to run the Setup program, complete the user account information and TB and select Continue. TB completes the search and displays the correct account (att.net) connection information, SMP, POP3, Ports, etc. I select DONE and the Checking Password box displays. It runs for a few minutes and an Error message displays: "Unable to log in at server. Probably wrong configuration, user name or password." If I select Configure Manually, a window displays showing the correct configuration information (I have checked it four times). I will note that "Normal Password" has been selected for Authentication Method in case that is important. I have tried this method several times and get the same Error message. Any help will be greatly appreciated. Thank you.

I have attached a screenshot of the configuration window. Note: My account is with att.net but I am still using my old pacbell.net account that was merged with ATT many years ago.

I am currently trying to set up extra SMTP servers for additional identities in my e-mail account. I would like to use the Amazon service for this.

However, as soon as I try to send an email with the data provided by AWS, I get an error message:

"Sending of the message failed. The Outgoing server (SMTP) <ses-smtp-server-url> does not support the selected authentication method. Please change the 'Authentication method' in 'Account Settings | Outgoing Server (SMTP)'."

Changing the "Authentication method" did not work either. If I enter the same data in gmail as "Send mail as" (the equivalent to the extra identity of Thunderbird), the connection in the GUI of gmail works without any problems and I can send e-mails via it. So it can't be the data or the configuration of the SES.

I am afraid that Thunderbird does not yet support the newer protocols that SES requires. Does anyone here have any ideas?

Server: <ses-smtp-server-url> Port 587 Connection security: STARTTLS Auth. method: Encrypted password User Name: <username>

Hi,

When viewing an email thread, I see all "copies" of an email, like label folders. (See image)

How do I remove all these duplicates?

Also, on another topic, when I forward mail from one account to another (so that I have that mail in both accounts) - and I have both accounts configured in Thunderbird - the second (forwarded) mail generates a notification sound - but no notification popup. Can this notification sound be eliminated (like the msg display popup does not happen)? It is useless.

Thanks!

Can sks please explain purpose of local folders? I have 2 accounts with their own sets of folders, why do I need Local Folders as well? Desktop win 10 64 bit system.

Hi - how I receive my Thunderbird emails have changed. I now have to toggle on the attachment (paper clip) symbol to see emails received and sent that have / don't have attachments. Previously they were all in the same list. I didn't knowingly change any of the settings. I'd like to reset the emails so that all emails are in one continuous list - both with and without attachments.

Very much appreciate it if I could be guided through how to reset this.

Thanks

Steve

Hi! I have trouble setting the date format in the emails list. It should be the UK format as per the setting selection, however it is showing the American format. I am using Linux Mint and timedatectl says Time zone: Europe/London (BST, +0100)

I have attached screenshots. Please let me know what am I missing. Thank you.

I recently had to change my email address to a gmail account. I want to continue to use Tb but don't want copies kept on the Gmail account. Is there a way to delete the messages in Gmail without deleting them in Tb.

The inbox had about 18 months worth of emails. I deleted three emails that had been flagged by Thunderbird as spam. Then I went to the trash folder and permanently deleted the trash that included many other unwanted emails.

When I returned to the inbox, the full list of emails was present but after clicking on any email there was no email content shown. A new email came in and the content was shown for that email.

The sent folder still shows all the sent emails.

After looking for solutions on the web, I selected the inbox, right clicked and opened properties. I then selected "Repair Folder". Now, the only email shown in the list is the new email that came in after the issues started.

I have looked for crash reports and it says there are no crash reports.

Suggestions....? Thank you, Peter