All Products Support Forum

My wife and I each have our own Thunderbird accounts. They were created a long time ago, at different times. I’m pretty sure that they were not set up identically. She has recently experienced a problem: the number of new emails downloaded (as shown in the lower left corner of the screen) doesn’t match with the number of new and unread emails listed in the Inbox (the emails shown in boldface). Something else, though I think related: In the upper left corner of the screen, on the same line as the word Inbox, is a small circle with a number inside. I think that number gives the number of unread emails in the Inbox. Her number shows 20 but the actual number (boldface) is 15. Is this a serious problem? Is it a problem at all? If so, how to fix it? Thanks.

I removed the Firefox Relay, however whenever I want to open my email its still there and I have to keep entering my email address manually, How do \i get rid of it?

I am assisting my friend Lindsay in aged care to enable him to continue to use Thunderbird for email. Currently TB will receive mail but unable to send.

This is complicated in that Lindsay is paying iPrimus.com.au a monthly fee to enable him to use an old email address xx@bluep.com. I can log in to the iPrimus web portal to send and receive xx@bluep.com emails, https://webmail.iprimus.com.au/?_task=mail&_mbox=INBOX.

I downloaded Thunderbird version 115.6.0 (64-bit) on my pc this morning and the Auto Set Up configured mail.bluep.com as the incoming (POP) and outgoing (SMTO) servers. Mail is coming in but not sending.

I changed the outgoing server to smtp.iprimus.com.au, default port 587 however messages still cannot be sent and Thunderbird shows that smtp settings must be reconfigured.

I spoke this morning to iPrimus Tech Support who advised the default smtp port should be 25, not 587. However I have found that resetting the smtp port to 25 does not enable emails to send.

Note that I have previously set the smtp port to 587 which enabled sending on non ISP connections. This ability would be required as Lindsay is using whatever Wi-Fi service is available in the facility.

iPrimus Tech Support have suggested I should contact Thunderbird (Mozilla) about this problem.

Can you advise Thunderbird server settings for this situation.

Thanks for you assistance. Regards, Peter M

I'm tryin to swap over to firefox from chrome vbut I can't see my bookmarks. It seems that the desktop version supports a bookmarks toolbar but the IOS version doesn't. t wouldn't be so bad if I could see ALL my bookmarks on IOS but I can't. I can't find any way of accessing them.

I don't need a bookmarks toolbar on IOS, I just want access to those I bookmark on desktop into the bookmarks toolbar.

Any ideas?

I've had Thunderbird for a long time, but today, when I opened it, I got the set up page. Both email accounts (earthlink and gmail) were gone, along with all the saved email folders. Running Lenovo PC, Windows 10, latest release of Thunderbird (115.7.0, 64 bit).

Also, I can't send emails through earthlink, Just get the "sending message" window (that never goes away).

I have been successfully using Thunderbird for many years. In the last year or so I have been noticing that occasionally one of my sent emails gets corrupted such that the email body starts showing html text and the email subject header is changed to another email header that exists in the same folder but is unrelated to the email body. When I check the corrupted email from the Gmail web user interface, the email is not corrupted. I tried repairing the folder but to no avail.

I attach an example of a corrupted email below:

From Content-Type: multipart/alternative; boundary="------------NlJPhaGMpTt1f7wbEHlOvxNE" Message-ID: <4bf83075-b571-4214-921b-09f4582e6e58@jesuit.org.mt> Date: Thu, 4 Jan 2024 10:25:56 +0100 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: Minutes of SCPC Meeting Content-Language: en-GB To: Charlotte Attard <charlotte.attard@staloysius.edu.mt> References: <AM9PR10MB487111674D307583B8DB6AD3D195A@AM9PR10MB4871.EURPRD10.PROD.OUTLOOK.COM> <AM9PR10MB487106F96E9E404BDA477808D167A@AM9PR10MB4871.EURPRD10.PROD.OUTLOOK.COM> From: Stephen Scerri <stephen.scerri@jesuit.org.mt> In-Reply-To: <AM9PR10MB487106F96E9E404BDA477808D167A@AM9PR10MB4871.EURPRD10.PROD.OUTLOOK.COM>

This is a multi-part message in MIME format.

Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit

Yes Charlotte - please proceed - sorry for delay

S

We still use some Dell 13g servers equipped with idrac 8. When I'm trying to launch the virtual Console the window opens up but nothing shows. This used to work fine in previous versions of Firefox. I can't tell from which version it stopped but it's not long ago. Also idrac 9 console works fine in Firefox When trying to open console idrac 8 in Chrome it works fine Any idea what could be causing it? Any config switch to tweak?

Several pages don't display properly. espn doesn't have a menu, cnbc displays and then goes blank, as do some articles on nytimes.com. These and other anomalies all work fine on safari. Any help greatly appreciated. Jim

My Firefox settings are configured to "Open previous windows and tabs" on Startup. This worked fine until this morning, when I lost all of the tabs in my session, including the pinned ones. The last time I closed Firefox, there was only one window open.

I have already tried these ideas to restore the tabs:

• CTRL+SHIFT+T: Does nothing
• CTRL+SHIFT+N: Does nothing
• Three bar menu -> History -> Recently closed tabs: The list is empty
• Three bar menu -> History -> Recently closed windows: The option is greyed out
• Three bar menu -> History -> Restore previous session: The option does not exist in the menu
• Open user profile folder and open sessionstore-backups folder: There are three files named "previous.jsonlz4", "recovery.baklz4" and "recovery.baklz4". They are each 2KB and contain only an empty tab with the URL "about:home". There are three additional files starting with "upgrade" but they are from too long ago, so they don't contain the tabs I require.

The contents of these tabs are vitally important for my work, so this is causing me significant stress. If anyone can suggest ways to recover my previous tab beyond the documented fixes, I would greatly appreciate it. Thank you so much to anyone who can help!

I notice this subject has been mentioned prior, but I cannot find a resolve. Been using Thunderbird for a long time without issues, but last week it stopped sending and receiving emails through the Skymesh internet provider. Still sends & receives Hotmail/Gmail/Yahoo, but will not connect to any Skymesh accounts. Have reinstalled/updated, but no change. SMTP timeout and if I change settings I get the 10060 error. Could not even connect to their Webmail page either. If I turn VPN on, then I can access their Webmail page. Rang Skymesh, they poked around and said it was all this end and with Thunderbird. Seems an IP number change via VPN with Opera resolved the Webmail page access, but I cannot do that thru Thunderbird. Running Win 7. Anyone ??

When running Thunderbird in Dark Mode, the message pane (that shows the message when you select it from your inbox) still has a white background. This makes perfect sense, because a dark background can easily mess up HTML mails.

Which I know because the compose / reply window does have a dark background, making it all but impossible to read what you're replying to if it was a HTML mail.

I would like to set the view and reply window to use the same background. Can this be achieved or is this a bug?

Symptom:

1. TB stopped downloading new emails for one account on PC.

Solutions Tried without success:

1. Checked Email configuration and settings 2. Restart TB 3. Rebuild Global Database by deleting global-messages-db.sqlite file. 4. Delete Saved passwords. 5. Delete all emails on webserver dating back to when problem began. 6. Change password on webserver.

Additional information.

Current version of TB: Version 115.9.0 Windows Version: Windows 10 Home 22H2 Email Webserver: Ionos Email Protocol: POP3

Issue Details: I use TB on my desktop to manage many different email accounts. Some from Gmail and some from Ionos. Last week, TB stopped downloading emails from one of my Ionos accounts. It still downloads from my other Ionos account and my gmail accounts. I use Aquamail on my Android device and it continues to be able to download emails for this same account. Additionally, I have a laptop with TB and it continues to download emails from this account without issue.

If you need additional information, please ask. Suggesting switching to IMAP is not useful and not a solution to my issue. I respectfully request that you Please do not go there (been down this road before). I want to fix the problem, not go around it.

For some time now, I've been experiencing the following issues with PiP:

• The floating window opens in a random (and annoying) place and does not place itself automatically on the lower right corner as it used to (where I always move it, so it has no memory as it used to)
• It's impossible to keep the "always on top" mode on by default, and I have to do it every single time
• When I toggle windows, the PiP window is always the next one, even when it was not the one I switched from, and I have to always toggle twice for switching between two windows when I have a 3rd PiP window
• When I change language using the keyboard shortcut, it changes the language on the PiP window, and I have to use the language icon bar. Then, the PiP window becomes activated, and I have to toggle back to the window I was working on before (on which I wanted to change language). I have the "separate languages for separate windows" option activated.

It's been some months now, and all those things were working before an update but never came back...

Does anyone know if there's a way of fixing these issues? I've tried things I found online but nothing seems to work.

Many thanks

This only happens when clicking a link from an email in Thunderbird most of the time it is a news platform. I have to copy the link and open a new tab in Firefox to have it work.

After the last couple of Thunderbird updates, I have been experiencing a really frustrating issue that I can't seem to resolve.

Only when I receive emails from one specific recipient and I go to reply to them, the font size is suddenly really large, and the spacing between new lines is huge.

Even if I set the font options to the same as if I was replying to a different recipient or creating a new message, it still appears really large.

What's worse is even if I make all these adjustments and get the font size and formatting looking okay, the actual sent message is even more out of whack and has all these spacing problems.

Does anyone know what might be going on? No other mail client I use experiences this issue whatsoever, and this issue is only occuring with this recipient.

Since some time when I start up Thunderbird I get a popup:

"Add Security Exception" + "You are about to override how Thunderbird identifies this site"

In forums it was stateed this can be due to the antivirus program. I am using Acronis Cyber Protect Home. I closed Thunderbird, pauzed the real time protection and started up Thunderbird again: this did not solve the issue: I still get the pop up, see image attached.

Is there a way to analyse the origin of this pop up? What's triggering this pop up in Thunderbird?

Thx!

Greetings, I experienced this problem with the prior update, now after the current update i get this" internal Server error" Hopefully you can straighten this out. I hate using Google for anything!

Regards, Chris

When photos, videos, or websites are linked on a FB comment, it used to display a thumbnail preview below the comment. Now it just shows the link. On mobile, the preview appears. So I'm thinking a setting got changed on the desktop version.

Does anyone know what the issue is and how to correct?