All Products Support Forum

I have 4 different email accounts, all managed by IONOS. These have all been set up under thunderbird OK. But when I send an email from 1 of these email accounts I always have to enter my password for that a/c. With all the other accounts, this is not necessary. I do not use Thunderbird or Firefox password managers. I assume that I must have made an error in setting up the outgoing details when setting up that particular account in Thunderbird, but I cannot find a way of checking if that is the case.

After updating Thunderbird to 115.5.2 I receive an error when I check (get) messages of my gmail account : 'The STAT command did not succeed. Error getting message number and size......'. However, the messages do come in and so the error turns out false. since the authorization (OAUTH2) credentials are accepted.

I have my server settings check messages from startup; every 5min; automatically download new messages. That works fine. Again only when I goto "Get Messages" the error shows up.

What is wrong here and ho do I fix this? Thank you

Hi there, My preview panel is working very badly, it either shows the content of the email or is completely white. What can I do to remedy it? - In some cases the emails appear in very strange codes, thousands of lines like this (iVBORw0KGgoAAAANSUhEUgAAAPAAAABGCAYAAADyxhn6AAAAAXNSR0IArs4c6QAAAARnQU1BAACx jwv8YQUAAAAJcEhZcwAA) - in other cases, totally blank - in other cases it's everything ok It's working fine, receiving and sending all emails.

I have windows 11 home edition. Thanks

When send a calendar event to an Attendee list I get an email notification if they've accepted or declined but I cannot see the status in the actual event. I also cannot manually update the attendee status. I should be able to see attendee status in the event shouldn't I?

Using Thunderbird 115.10.1 on Ubuntu

Collecting mail one day, I received a Thunderbird message 'compact now'. After the compact process, some mailboxes are missing. How do I re-instate these deleted mailboxes?

Thunderbird Version 115.10.1 on Windows 10

I wrote my own POP3 server and it largely seems to work apart from when Thunderbird tries to RETR the email messages at which point I get the error "Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.".

If I drag a saved version of that same email that fails to be retrieved into Thunderbird , it can write it to the Inbox without issue. That means Thunderbird has permission to write to the Inbox file and so it is not a permission issue and there is enough space. I feel like it is more likely to be something I am doing wrong in my protocol implementation. For example, could I get this error if I misrepresented the octet count? Also I notice that even though my CAPA reply does not include UIDL, Thunderbird still seems to send that request and should get the response "-ERR Unknown command".

Output from my server showing what Thunderbird sent to it: CAPA USER person@mydomain.com PASS XXXXX STAT LIST UIDL RETR 1 QUIT

Any help is much appreciated, even if it is guidance on how I can debug it more thoroughly.

Thanks.

I have been using Thunderbird for years. Always updated to the latest version. My current Thunderbird addresses are setup through Hostgator hosting and I've rarely had an issue. I recently set up a Zoho email address and added it to my Thunderbird platform so I can send and receive emails there. Problem is, when I send a test from one of my long time Thunderbird emails to the new email that goes through Zoho, it never shows up in my Thunderbird inbox. Never shows up in my Zoho inbox either. I can send from the new Zoho email to one of my established emails no problem using Thunderbird. But it doesn't work the other way around. I've checked everything I can think of--IMAP server settings, SMTP settings, added MX records, you name it. Not sure where the hang up is. Hopefully someone can help, thanks.

Tbird is close to perfect for me, so I regularly support it. One thing I do have occasional problems with concerns searching and using tags I hope I am wrong, but when I search for one or several emails I usually find them, but still have no idea of where they are located. The same applies to the very handy tags which I also gratefully use. I filter mails to appr 30 folders and archive them yearly, so actually finding an email can take some time. The path to the folder is not necessary - just the name of the folder would be enough to pinpoint it

yt / Joran Ahlback

I like to read, file, or delete my email when it arrives. Suddenly my inbox showed 18,642 unread emails! I've read them all, but I cannot figure out how to return my count to 0 without deleting each one individually. I don't know why this happened. Can anyone help me return my count to 0?

I am encountering a peculiar issue with the "Reply to All" functionality in Thunderbird, which I believe may be a bug or an unintended behavior within the application. I hope you can provide guidance or a solution.

Issue Description: When I attempt to "Reply to All" to an email that I previously sent (which is the last email in a conversation thread), Thunderbird automatically alters the sender's address. Specifically, instead of maintaining me as the sender, it changes the sender to the one (or the first one, if there's more) of the original recipients' addresses. As a result, the email appears as if it's being sent by the recipient back to themselves. This messes with the recipient's folders and rules, as the message has no indication it's been sent by me. This happens when I initiate the "Reply to All" action from the Sent folder on emails where I was the original sender. This only happens in one of the email accounts I'm using in Thunderbird, and it's a POP Mail Server type account.

Steps to Replicate:

Send an email to one or more recipients. Go to the Sent folder and open the email that was just sent. Click on "Reply to All." Notice that the sender's address is automatically changed to one of the recipients' (typically the first one, if there are more recipients). Expected Behavior: The sender's address should remain as my email address, not change to a recipient's address, ensuring the email is correctly identified as being sent by me to the other recipients.

Troubleshooting Steps Already Taken:

Verified that no extensions or add-ons are causing this behavior. Checked for any relevant settings within Thunderbird that could influence this behavior but found none. Updated Thunderbird to the latest version available. I would appreciate any advice, solutions, or workarounds you can offer to prevent Thunderbird from automatically changing the sender's address in this scenario. Please let me know if there are any logs or additional information I can provide to assist in resolving this issue.

Thunderbird 115.10.1 64 bit on windows 11. 24.4.2024.

Question: How I can access shared folders in Thunderbird?

Office 365 business. I can access admin portal etc:

portal.office.com/adminportal

And also I can go to Exchange admin portal via this. So, in my opinion I can use all deep settings also.

Office 365 licenses (full) for name.lastname@company.fi. Portal show "Office 365 business standard".

I create also shared folders. Today shared folders found from "Teams groups". Log in to portal.office.com/adminportal, "Teams-Groups", and then "Shared mailboxes".

My conf: Office 365 business standard found name.lastname@company.fi. ("john.smith@company.fi", "alice.brown@company.fi" as example.)

Shared mailboxes sharebox1, sharebox2, so, it is possible receive email sharebox1@company.fi, sharebox2@company.fi etc. (in real life share box names are bookkeeperteam@company.fi, orders@company.fi, helpdesk@company.fi etc etc.)

CONFIGURATION IS FULLY WORKING. It is, in Outlook it is possible receive and send emails, shared folders with messages are available etc.

------ 

HOW I can add shared folders to Thunderbird? Clean install tested.

1. LIcenced mailboxes work properly in Thunderbird. Tested.

name.lastname@company.fi:

Server: outlook.office365.com, port 993 Username: name.lastname@company.fi Connection security: SSL/TSL Auth: OAuth2

And smtp: smtp.office365.com, 587, starttls, oauth, name.lastname@company.fi.

This configuration work properly, and it is possible receive and send email from Thunderbird.

SHARED FOLDERS

It is not possible add shared folders.

Server: outlook.office365.com, 993 Username: name.lastname@company.fi/sharebox1 (where name.lastname is real working account name, just same as in position 1- working account. Also this sharebox1 work in outlook.) Connection security: SSL/TSL (no difference is it this or stattsl) Auth: OAuth2

(I am sorry, all my systems are native language, so I must translate---)

OK: Now I try use this shared folder. It is visible in Thunderbird. But immediately thunderbird open Browser and ask password: "name.lastname/sharebox1", wrtite password. Now I put same pw as in this account (name.lastname..). "Password wrong." I try empty password. I try account password.

SO: HOW to add shared mailbox in Thunderbird? This information "name.lastname/sharebox" not work. Is it any other method? Or any Exchange setting modification make this?

Hello people of Firefox,

I'm attempting to deploy Mozilla to our android devices using MDM but need to be able to use our organization's Certificates.

I know I can manually go into the secret menu and set it to use third party CAs and that works but when deploying to over 500 devices that's not feasible...

Is there any configuration keys I can access to be able to remotely configure the application to use third-party CAs? (These are normally referred to as key-value pair)

Thanks.

Until recently when a spam email was received, I could go to my Message Filters and one set up as DELETE. After entering the spam email address I could then select RUN NOW and the spam email would be deleted. When I click RUN NOW at present nothing happens. How can I get this filter to work again.

All of a sudden, over 6 months of my "deleted" items dropped off. I like to keep up to 9 months items for history reference if needed. Is this an automatic thing, or if, can it be adjusted by settings?