Firefox supportforum

I asked this question about 115.4.1 and was told to try in safe mode. However I cannot connect to my mail servers of which I have 2 and Gmail when in safe mode. Please look into the resource handling problem with the new Thunderbird under Win10.

1) Whenever I open Thunderbird the Gmail messages apparently get refreshed taking several minutes. I have cleaned up that inbox and limited to 366 days of mail.

2) I spent hours moving mail from past year from my other accounts into local storage. You no longer can scroll and block select more than about 20-30 messages at a time regardless of the background activity 1) above. The program requires you to repeatedly release shift key to grab more than a few messages. If you are able to grab say 1000 messages, and try to move them, the system chokes and does not respond.

3) Any background activity impedes the ability to scroll the inbox.

The new versions are crippled in some way as far as resources. The older version was more tolerant.

Please listen to complaints. Putting in safe mode I cannot troubleshoot. It is also very difficult in Win10 to follow instructions to safe mode unlike previous OS.

When I visit an http site and specify a non-standard port, it automatically changes to https, which is not a site redirect but something Firefox changes. This site already has an https service, and the http service will redirect to https. I reproduced the same situation in chrome. Accessing the http service with a non-standard interface was normal. After accessing the https service once, the service with the non-standard port was also changed to https. Clearing the data will restore it. Is this cached? My HTTPS-Only Mode is turned off, and set an exception for this site. thx.

Hi I have a problem with the configuration of my Firefox. (I hope it is not something more serious like a malware or a security break)

Firefox version 124.0 (64bit) Os: Windows 10 Pro (64bit) 10.0.19045 Build 19045

Step to reproduce

1. 1. I go to: https://wwws.tesoro.es/index.aspx (website of the Spanish gov)
2. 2. I click on the link: Cl@ve in the center of the page (that should bring me to https://pasarela.clave.gob.es/Proxy2/ServiceProvider)
3. 3. I receive an error page "Did Not Connect: Potential Security Issue" "SEC_ERROR_UNKNOWN_ISSUER" (see the attached screenshot)

Things I tried

• I followed the same steps on Chrome on the same machine

The website works

• I followed the same steps on the same Firefox in Incognito mode on the same machine

The website DOESN'T work

• I followed the same steps on a completely new Firefox profile on the same machine

The website DOESN'T work

• I followed the same steps on Firefox on a different machine (same Firefox version, windows 11)

The website works

I tried to watch a youtube livestream today and it failed to play. Non-live videos on youtube are playing, even the same videos watched as VODs after the stream ends, but the livestreams are providing "Your browser can't play this video" errors.

Simultaneously, I'm noticing that some videos on Reddit (such as embedded tiktok videos) are stuck with a circling ring and won't play. At least some of the same videos will play on Tiktok (when I can find them).

ALSO, when I try to watch videos on my Nebula subscription, I'm getting a "This video could not be loaded: 4" error code. ANY video on Nebula.

What the heck gives?!

Hi All,

I'm trying to set the border color for my url & search bars to gray when non-focused, and blue when receiving the focus.

The following code works for the search bar, but the url bar is receiving a separate blue border around the gray border, instead of changing the color from gray to blue.

Can someone suggest how I might set the url bar to blue (just a single border, not the double it has now), both when it has focus and when it's expanded?

Thank you!

/* set non-focused url & search bars to gray border */
#urlbar > #urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background, #searchbar { border: 1px solid #a1a6b5 !important; outline: none !important; border-radius: 0px !important; }

/* set focused search bar to blue border */
#urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background:focus-within, #searchbar:focus-within { border: 1px solid #0078d7 !important; }

/* set focused url bar to blue border */
#urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background:focus-within, #urlbar:focus-within { border: 1px solid #0078d7 !important; }

Hello everyone. Since installing Linux Mint in May 2023 I have been having this issue with Firefox.

Description of issue: When I switch between (or drag) tabs in a Firefox window, the whole window becomes unresponsive, with the last tab I was switching from still in front. Often the contents of the window start to flash (disappear and reappear, leaving a black backgground) every 2 seconds. I can drag the window around, scroll, minimize it, but it is impossible to give any input in any tab. The only action somewhat possible to do inside the window is bring other tabs in front, it is still quite hard for the input to register, and if it does, it takes 10+ seconds. The issue goes away if I close the specific Firefox window, or if I manage to select and drag one tab out of the frozen window into its own new window. Then everything works as intended, like nothing ever happened.

I can reliably cause the freeze-up in a short time by holding CTRL+TAB and drag one tab to change the order while firefox cycles through the tabs in the open window.

While the window is frozen, the rest of the desktop is responsive as normal, even other Firefox windows. If I try to interact with the frozen window I can rarely see spikes of CPU usage. RAM stays at normal usage levels, far from being full.

What I have tried so far that has had no effect on the appearance of the issue:

1) Disabling all extensions i have

2) Run in troubleshooting mode

2) "Create a new places database" as suggested [https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding#w_fi...]

3) Disabled hardware acceleration

4) Creaing a new firefox user profile

5) Use "Refresh Firefox" from the troubleshooting page

6) Use the Flatpak version of firefox

7) Reinstall firefox

Here is my system information

here

Is there a way to enable using both a default pattern as well as a custom image for the background on Firefox Color? I really want to enable both but it is making me choose one or the other. Please help me do this or enable the ability to do so.

When I open a new tab, I can't automatically start searching anymore.

Here's a video: https://www.loom.com/share/ebcc8685187a4e2284cf40b75f7e134e?sid=9b0a3db3-fcac-4bae-9ff9-cdbe2b8b955b

Now, I have to click into the search bar to type. That's annoying.

Anyone know how to fix this?

Hey there, I had two windows in firefox open, one of which had a lot of tabs. I was using firefox on my surface pro, and then got up to get a snack. I came back, and the window, which I had been using for some time, was gone. The other window was still open, and firefox had not been closed. I thought I would just open it up by restoring recently closed window, but it was gone. I routinely clear my history, but even tabs that I just had open 5 minutes ago are missing from my history, like I never opened them in the first place. What is going on?

When I try to customize the toolbar in Firefox 115.10, the browser tries to change the page to the customize toolbar / overflow toolbar page. However the page flashes on and then reverts to the normal browser page. The page showing customize toolbar/ overflow toolbar, is transient and does not last. So I can't even customize the order of the buttons on my toolbar. This wasn't a problem a few days ago before the switch to this latest version. In particular I am trying to change the position of the "home" button to the left side of the address box. I just can't bring up the customize toolbar page. I'm not talking about the position of the add-on or extension buttons...just the home button. Hope this is clear. By the way, I've even tried this in safe mode to no avail.

Hi All,

I would like to change the url border color when it has the focus to blue.

The code below works, except when you press Escape.

After hitting Escape, the urlbar still has the focus but its border changes back to gray. It should remain blue.

I would also like to remove the box-shadow after pressing Escape, when the urlbar is not expanded (to mimic the behavior of FF 88).

The url and search input fields also do the same goofy thing Windows 10 does - the cursor stops blinking after 5 blinks and remains frozen. Any way to remove that behavior and keep the cursor blinking? If not, no big deal, the other stuff above is more important.

Any code suggestions to get that behavior are welcome!

/* set the initial borders of the urlbar and search bar to gray */
#urlbar > #urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background, #searchbar { border: 1px solid #a1a6b5 !important; outline: none !important; border-radius: 0px !important; }

/* set urlbar border to blue when focused */
#urlbar[breakout][breakout-extend] #urlbar-background {
   border-color: #0078d7 !important;
}

I am unable to de-select the "Ask to save logins and passwords for websites" setting. The option is checked and I cannot "uncheck" the box. The texted is grey and the check box is a light color denoting it's not able to be toggled.

I searched for a solution and it's not the same problem as others are having where they have the the "never remember history" option enabled. My setting is "remember history."

I am a personal user, and this is my personal computer. I have admin rights on my computer. Running Windows 10 Pro.

Screenshot attached.

Thank you for any help with this.

Hi,

I was using FF on Ubuntu 22.04.4 LTS. Had version FF 120.x and playing video in Netflix worked fine. Then I updated to FF 124.x and playing video stopped with error F7355-1203.

I've checked the DRM setting and it is enabled, I checked addons and I have OpenH264 and Widevine installed, both set to always active.

I've checked installed codecs and I do have libavcodec58 installed. No update for that available via apt. I also have ffmpeg installed, no problem with that either. I can play Netflix videos in Chrome, but not in Firefox now. Something happened to Firefox when I updated from 120.x to 124.x. Today I updated to 125.x, same problem, Netflix video won't play.

I've unchecked the DRM setting and re-checked it, and that does reinstalled Widevine but does not fix the problem.

Any ideas what could be the cause?

Hi All,

For some reason my tab icons look a little low, and I would like them more vertically centered.

I've been trying to move these icons around using some older code that doesn't seem to work anymore.

The code below no longer has any effect.

Does anyone know how to move the tab icons up 1 pixel?

Thanks!

/* padding doesn't move them */
.tab-throbber, .tab-icon-image { padding-bottom: 4px !important; }

/* margin doesn't move them */
.tab-throbber, .tab-icon-image { margin-bottom: -2px !important; }

/* can't even turn the icons off LOL */
.tab-icon-image { display:none !important; }

Hi,

This has been brought up before, but not with this exact question (not that I could find, at least).

I understand that cookies cannot be synced across devices, but this is not what I am asking for. Is there a way to make firefox sync the list of exceptions? Meaning, only the specified website URL and its status, not the cookies from these sites.

Recently upgraded to a new laptop, Thinkpad X1 Carbon 11th gen. Running a Wayland-based WM. OpenGL is working fine everywhere except Firefox. Works fine in Chrome, Blender, glxgears, Steam games. Firefox 121 gives the following error:

[GFX1-]: Failed to compile vertex shader: gpu_cache_update [ERROR webrender::device::gl] Failed to compile vertex shader: gpu_cache_update

Confirmed that MOZ_ENABLE_WAYLAND=1 is set.

❯ glxinfo -B name of display: :1 display: :1 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer):

   Vendor: Intel (0x8086)                                                                                                                                                                                                          
   Device: Mesa Intel(R) Graphics (RPL-U) (0xa7a1)                                                                                                                                                                                 
   Version: 23.1.9                                                                                                                                                                                                                 
   Accelerated: yes                                                                                                                                                                                                                
   Video memory: 31754MB                                                                                                                                                                                                           
   Unified memory: yes                                                                                                                                                                                                             
   Preferred profile: core (0x1)                                                                                                                                                                                                   
   Max core profile version: 4.6                                                                                                                                                                                                   
   Max compat profile version: 4.6                                                                                                                                                                                                 
   Max GLES1 profile version: 1.1                                                                                                                                                                                                  
   Max GLES[23] profile version: 3.2                                                                                                                                                                                               

OpenGL vendor string: Intel OpenGL renderer string: Mesa Intel(R) Graphics (RPL-U) OpenGL core profile version string: 4.6 (Core Profile) Mesa 23.1.9 OpenGL core profile shading language version string: 4.60 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 23.1.9 OpenGL shading language version string: 4.60 OpenGL context flags: (none) OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 23.1.9 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

❯ inxi -G Graphics: Device-1: Intel Raptor Lake-P [Iris Xe Graphics] driver: i915 v: kernel

          Device-2: Bison Integrated RGB Camera type: USB driver: uvcvideo                                                                                                                                                         
          Display: wayland server: X.Org 23.2.4 driver: loaded: i915 note: n/a (using device driver)                                                                                                                               
          resolution: 1599x999~90Hz                                                                                                                                                                                                
          OpenGL: renderer: Mesa Intel Graphics (RPL-U) v: 4.6 Mesa 23.1.9 

❯ uname -a Linux nflx-erahhal-x1c 6.6.12 #1-NixOS SMP PREEMPT_DYNAMIC Mon Jan 15 17:57:06 UTC 2024 x86_64 GNU/Linux

On both my old laptop and a new one (so a new installation of Firefox), I'm unable to load Frontier Airlines' website (www.flyfrontier.com) and get a time-out message:

The connection has timed out

The server at flyfrontier.com is taking too long to respond.

   The site could be temporarily unavailable or too busy. Try again in a few moments.
   If you are unable to load any pages, check your computer’s network connection.
   If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web.

This happens even with all of my extensions disabled, with enhanced tracking protection turned off for that site and with HTTPS-only mode and DNS over HTTPS disabled. It also happens when using Firefox in safe mode. Safari loads the same website very quickly and with no problems. Does anyone know what might be going wrong? Thanks.

I often see that some pages take up too much memory. This critically affects the performance of my laptop with 8 GB of memory. However, I was unable to reproduce this behaviour. Now I have caught two web pages.

https://linuxhandbook.com/sort-top-command/ 

and https://www.tutorialspoint.com/how-to-find-number-of-ram-slots-in-linux The first page quickly takes up 1-2GB and continues to drain memory. The maximum usage was 7 GB on a laptop with 16 GB of memory. This behaviour is the same in Firefox and Chrome. The second page quickly takes up 2GB, which is very noticeable on 8GB laptops. Why do these pages take up so much memory? Most importantly, how can you protect yourself from such an unexpected memory consumption?

Recaptcha isn't working in Firefox. It works in Chrome, Opera, and Edge with no issues, it will either just go to a check mark or open the window with the pictures to choose, on both regular pages and on the Google Recaptcha Demo site Google Recaptcha Demo site. But when I load a page that requires Recaptcha in Firefox, it just spins forever. It was working fine a few hours ago, and I didn't change any settings or anything in Firefox. I was filling out a job application and it worked fine, then I went to another job application and Recaptcha won't work at all, even on the Recaptcha Demo site.

I'm on version 125.0.3 (64-bit), on Windows 10. Not using a VPN or anything like that, just a standard Ethernet connection, with whatever Charter gives me.

Steps I've tried, none of which have helped:

1. Cleared Cookies. 2. Restart Browser. 3. Restart Computer. 4. Restart Modem and Router. 5. Opening Firefox in troubleshooting mode. 6. Ensured Firefox was up to date. 7. Reinstalling Firefox. 8. Turned Connection Settings to no proxy. 9. Turned off Enhanced Tracking Protection. (It's set on standard otherwise, and I didn't change it) 10. Release/Renew IP via Command Prompt.

I'm genuinely at a loss of what to do, after a couple of hours of searching around for solutions. I don't get how it just stopped working in the span of like ten minutes when I didn't change any settings or anything. Firefox is my main browser and it would be a tremendous pain to have to use another browser for any pages that require Recaptcha.

Any assistance or advice to solve this problem would be greatly appreciated!