cant log in to yahoo accounts, get SASL error.
Other than being slow to download my emails now for a few months, TB was performing well until a week or so ago. Now it also won't open the downloaded email when I click… (jàng ci lu gën a bari)
Other than being slow to download my emails now for a few months, TB was performing well until a week or so ago. Now it also won't open the downloaded email when I click on it and the TB freezes up so I can't close it out. I have tried restarting computer multiple times and it works for one or two emails that I can open and then starts freezing up again. Makes using it almost impossible. I have security Windows 11 Defender only and have had it the entire time when it also worked well.
I NEVER want to mark all my email as read. How can I disable that functionality? I look forward to being able to also get rid of shortcuts that do not require ctrl, alt, … (jàng ci lu gën a bari)
I NEVER want to mark all my email as read. How can I disable that functionality? I look forward to being able to also get rid of shortcuts that do not require ctrl, alt, or shift.
To get some information out of the way before reading: my verbose step-by-step is listed below, followed by a summary without the trouble shooting steps. I have read the … (jàng ci lu gën a bari)
To get some information out of the way before reading: my verbose step-by-step is listed below, followed by a summary without the trouble shooting steps. I have read the information about managing profiles when running multiple release channels, but found it a little confusing. If I can improve the formatting here, please let me know and I will edit my post to be more clear.
I am leaving the troubleshooting steps in the event that I did something wrong here.
My questions are primarily: 1. is there a more straightforward way to do this? 2. are there any additional steps to follow after successfully getting both a Release channel installation and a Beta channel installation as far as profile management?
The problem, with step-by-step troubleshooting steps to solve I have Thunderbird Release installed on Linux Mint system-wide, following the instructions here: https://support.mozilla.org/en-US/kb/installing-thunderbird-linux#w_system-thunderbird-installation
Now I take note of the fact that beta must be installed in a different directory: "It is possible to have multiple channels of Thunderbird installed, and even run them simultaneously. Each must be installed in a different installation directory, which will force multiple Thunderbird data profiles to be used in order to protect and keep your data separated."
I move on to Step 4 from the article linked, creating a symlink.
Everything works from here as far as me being able to click on the `thunderbird-beta` executable in `/usr/local/bin` and get into the Beta application with a fresh program.
Here is the step I'm unsure of, and where I run into issues.
In Step 5 of the linked article, when I installed release: "Download a copy of the desktop file": `wget https://raw.githubusercontent.com/mozilla/sumo-kb/main/installing-thunderbird-linux/thunderbird.desktop -P /usr/local/share/applications`
...gives me a launcher in `/usr/local/share/applications`. I can edit this in a text editor to point to a different icon etc if need be, but when installing release this is obviously already configured.
So when I install beta, I don't want two of the same icons representing different Thunderbird channels, because my assumption is that will cause issues. So instead of downloading this file again, I copy the file I downloaded with `wget` when installing release, and instead of naming it `thunderbird.desktop` I name it `thunderbird-beta.desktop`
...I can confirm through a file manager that the icon at `/opt/thunderbird-beta/chrome/icons/default` is a visually different icon with "Beta" added to the bottom of the icon.
So this launcher in `/usr/local/share/applications` is the step I'm having trouble with.
Troubleshooting steps:
For some reason, this works: allows me to save my changes and the icon of `thunderbird-beta.desktop` successfully changes to the Beta icon. By default, with no other changes, clicking this successfully launches Thunderbird, but of course it launches my Release version, so I change the Exec parameter to point to the Beta executable in `/usr/local/bin`
And now I get my desired results: start menu entry, separate icon, and launching the Beta release.
So my primary questions again are: 1. I notice that simply running the Beta application once uses the same `.thunderbird` directory that Release uses, and creates its own profile folder, which seems ideal to me. Verifying that this is the expected and preferred behavior? 2. I'm confused about the support article for profile management when running multiple release channels. Do I want to re-add all of my accounts to Beta from inside the application, therefore having two copies of my mail and profiles on my computer?
I have Firebird Beta installed. I also have Outlook 2019 but after an update the address book is not visible. I have located the pst file(s) but don't know how to import … (jàng ci lu gën a bari)
I have Firebird Beta installed. I also have Outlook 2019 but after an update the address book is not visible. I have located the pst file(s) but don't know how to import the email address book from Outlook to Firebird Beta. Can you help?
We are facing issues with Thunderbird mail application. Incoming emails are not being received in Thunderbird. Thunderbird is running very slowly and frequently becomes u… (jàng ci lu gën a bari)
We are facing issues with Thunderbird mail application.
Incoming emails are not being received in Thunderbird. Thunderbird is running very slowly and frequently becomes unresponsive. Sending and receiving emails is taking a long time. We have already restarted the application and system, but the issue still persists.
Kindly check the mail server settings and Thunderbird configuration from your end and advise on the necessary action to resolve this issue as soon as possible.
Your prompt support will be highly appreciated.
When we start Thunderbird, ALL past emails open as well, as tabs. How do we prevent this?
When I delete a message from the message list (not the first one), the next email selected is the first one in the list. This is a change in behavior - it used to the the… (jàng ci lu gën a bari)
When I delete a message from the message list (not the first one), the next email selected is the first one in the list. This is a change in behavior - it used to the the one following the position of the deleted the email would be selected.
If I have a password to sign into my Thunderbird emails, where do I find it. I haven't gotten this requirement in the past so where might I find it now and/or stop those… (jàng ci lu gën a bari)
If I have a password to sign into my Thunderbird emails, where do I find it. I haven't gotten this requirement in the past so where might I find it now and/or stop those messages?
I have closed my Rogers account and have opened a Wightman account. Before I closed the Rogers account I downloaded Thunderbird and transferred my e mails and contacts t… (jàng ci lu gën a bari)
I have closed my Rogers account and have opened a Wightman account. Before I closed the Rogers account I downloaded Thunderbird and transferred my e mails and contacts to Thunderbird. To do that I had to put in my Rogers address. Now, when I open Thunderbird or try to send a message from Thunderbird, a pop up asks me to sign in to the old Rogers account. As this account is no longer active I cannot use Thunderbird. I have tried to change the information from Thunderbird E mail but cannot get it to change. My new e mail address is martinwea@wightman.ca Please help me to make Thunderbird work properly! Martin
I have one desktop using LINUX MINT with its issues. using Thunderbird mail program. I also have a DELL laptop WIN 11 using Thunderbird. Is it possible to sync the two (2… (jàng ci lu gën a bari)
I have one desktop using LINUX MINT with its issues. using Thunderbird mail program. I also have a DELL laptop WIN 11 using Thunderbird.
Is it possible to sync the two (2) accounts to save emails on bothe CPUs?
Regards,
Christopher
Suddenly TB has started to download ALL my emails again from the POP3 server.
Why is it doing this and how do I stop it?
Want password for my Thunderbird email.
i try to delete email from my folders and all mails but they wont delete, plus one account to full and cant receive any emails. What are solutions? Thank you
Problem: the bottom left says "No messages to download", the download line on the bottom right keeps jumping and it's impossible to use filters! Tried: -Logged in to my a… (jàng ci lu gën a bari)
Problem: the bottom left says "No messages to download", the download line on the bottom right keeps jumping and it's impossible to use filters!
Tried: -Logged in to my account again, clearing old data. Didn't help. -Tried "Repair Folder" -Deleted filters -Deleted indexes None of these helped. How can I fix the problem? This didn't happen before, but it appeared with version 150.0.1.
I have a folder with 124000 email in my mailbox. Can I get backup with Thunderbird? It seems that there is a limitation of 10000
Every time I launch Thunderbird Beta 151.0b1 on Arch Linux, I immediately get a notification saying "The certificate for imap.gmail.com does not come from a trusted sourc… (jàng ci lu gën a bari)
Every time I launch Thunderbird Beta 151.0b1 on Arch Linux, I immediately get a notification saying "The certificate for imap.gmail.com does not come from a trusted source." If I click through to the exception dialog, it shows "No Information Available / Unable to obtain identification status for this site" — it can't even fetch the certificate to show me what's wrong with it. The error only appears on launch and doesn't come back. Mail sends and receives fine.
From the terminal, openssl connects to imap.gmail.com:993 without any issue (Verify return code: 0, TLS 1.3, X25519MLKEM768). No antivirus, no VPN, no TLS-intercepting software. NSS 3.123.
Has anyone else seen this? Is this a known Beta issue?
i love 65 because it is SO much faster but i would like to be able to sync my calendar. the older versions just do not work very well for me. too slow thanks, scott … (jàng ci lu gën a bari)
i love 65 because it is SO much faster but i would like to be able to sync my calendar.
the older versions just do not work very well for me. too slow
thanks, scott
Recently the email composing function has ceased working in Thunderbird (ver 65.0b3 (32-bit)). Other functionality also recently changed ie clicking the get messages butt… (jàng ci lu gën a bari)
Recently the email composing function has ceased working in Thunderbird (ver 65.0b3 (32-bit)). Other functionality also recently changed ie clicking the get messages button no longer downloads new messages so we now have to select Get all new messages from the drop down arrow attached to that button. We are only able to type in the email body text area when replying to messages but not when we compose a new message from scratch. The compose new message screen allows us to put in send from and send to as well as type a subject line but doesn't allow us to click in the body text area. If I update the subject line and then tab to try and get to cursor to move to the body text area, all that happens is a dotted line border shows around the body text frame box. I have tried safe mode without addins and removed silverlight but nothing has changed. My wife said she accepted some update a few weeks ago but can't remember what it was for. I will attach a screen shot of the compose page to assist in helping resolve this issue. Thanks
I am now beta testing Thunderbird 65.0beta and wish to integrate my calendars from gmail & Office365. How do I do this?
