Showing questions tagged: Onyesha maswali yote
  • Imetatuliwa
  • Archived

Thunderbird extremely slow to open on MAC. Cause: Mac address book (contacts)

Hello, I've been using Thunderbird since it first came out may years ago and have been a satisfied user. Sometime in the past year, after one of the Thunderbird updates, … (read more)

Hello, I've been using Thunderbird since it first came out may years ago and have been a satisfied user. Sometime in the past year, after one of the Thunderbird updates, Thunderbird became EXTERMELY slow to open. It takes over a minute. I have looked for solutions here for the past year...no luck (I've read through most all of them here, that have to do with slowness of Thunderbird opening, as well as on Reddit). I've tried basic troubleshooting e.g. clearing Thunderbird cache, increasing cache to huge size. I've seen references to the slowness being related to "multiple calendars". I don't use calendars on Thunnderbird and went as far as to delete/disable the default one that was there. Still no improvement. I know its a Thunderbird specific problem since:

a. I don't have this slowness opening any other program on my Mac (opening it or using it) b. I don't have a problem with performance of Thunderbird once it finally opens c. It all started in 2022 immediately after one of the Thunderbird updates.

I am on: Mac Air M1, Ventura 13.2, 16 GB Ram Thunderbird 102.14.0 (64-bit)

I hate to ditch Thunderbird after using it all these years and being a very early user since it came out, but I am at wits end. Any help is appreciated. Thanks for any help in advance!

Asked by msq58 1 year ago

Answered by Wayne Mery 1 year ago

  • Locked
  • Archived

Thunderbird Version 115 gives error "Unable to open the summary file for Trash on ..."

Thunderbird recently upgraded (?) to Version 15 on my Windows 10 laptop. Since them, when I go to look at the "Trash" folder, I get the message: "Unable to open the summ… (read more)

Thunderbird recently upgraded (?) to Version 15 on my Windows 10 laptop. Since them, when I go to look at the "Trash" folder, I get the message: "Unable to open the summary file for Trash on username@gmail.com. Perhaps there was an error on disk, or the full path is too long." I was able to fix it temporarily by restarting Windows 10, but the error is back a few hours later.

Asked by Albireo314 1 year ago

Last reply by Wayne Mery 3 weeks ago

  • Imetatuliwa

"Read" emails have disappeared

All of our "read" emails, --from all of our accounts -- have suddenly disappeared. All of the folders and subfolders are still present. We still get new email, but as s… (read more)

All of our "read" emails, --from all of our accounts -- have suddenly disappeared. All of the folders and subfolders are still present. We still get new email, but as soon as we read it, it's gone. We have had these same email accounts for years and have not made any changes. In Account Settings --> Synchronization & Storage --> "don't delete any messages" is checked. "Read" messages are still on our server.

So, 1) Why did this happen? 2) Is there any way we can get our messages back in Thunderbird?

Asked by nonpsvdl 5 months ago

Answered by nonpsvdl 5 months ago

  • Imetatuliwa
  • Archived

SMTP server not working after migration to outlook exchange. Solved: caused by Kaspersky

Hello community. My company decided, right before Christmas, to force-migrate all e-mail addresses from the functioning old servers to "Exchange Online", which not only… (read more)

Hello community. My company decided, right before Christmas, to force-migrate all e-mail addresses from the functioning old servers to "Exchange Online", which not only made the web-browser based access more complicated, but also required changes in Thunderbird. While they provided instructions, which I slavishly followed (despite being usually rather hand around the computer), I still cannot send e-mails with my work address - they get timed out. My company IT are notoriously unwilling to help with issues on the private computer and have recommended even beforehand to from now on only use the web-based access to avoid trouble - which is laughable, for me, as I need my e-mails offline as well. So before harassing them more loudly, I wanted to make sure it's a fault on their end not on mine.

Some details: New server is outlook.office365.com, SMTP port 587. Security level is STARTTLS, authentification OAuth2. These are the changed options requested by the company IT. The window popping up when trying to send a message asks me to chose a certificate for athentification and suggests "Adobe Conetent Certificate 10-7". Neither installing this manually, accepting, or changing something under "further options" changes the outcome that the message will be timed out. As my private e-mail also uses port 587, and it still works perfectly normal, this port is not generally blocked by the windows defender or antivirus (I use Kaspersky).

Maybe someone has an idea what it happening here? Or knows if to slve it by installing a particular different certificate?

Asked by thomas350 9 months ago

Answered by Matt 9 months ago

  • Imetatuliwa

Thunderbird 115.10.1 – missing folders in the panel after the update. SOLVED by deleting .msf files

Hi, after upgrading the programs to version 115.10.1 after restarting, all folders in the folder panel disappeared. I still have all accounts visible in the account sett… (read more)

Hi, after upgrading the programs to version 115.10.1 after restarting, all folders in the folder panel disappeared. I still have all accounts visible in the account settings. I attach a screenshot.

I follow someone instructions: Menu icon > Help > More Troubleshooting Information Under 'Application Basics' - Profile Folder - click on 'Open Folder' A new window opens showing contents of your 'profile name' folder Exit Thunderbird now - this is important Scroll down - delete all of the following files.

   folderCache.json
   folderTree.json
   session.json
   xulstore.json 

Start Thunderbird With no results. Thank you for any help.

Asked by Alex Saba 5 months ago

Answered by Alex Saba 5 months ago

  • Imetatuliwa

Very wrong attributions of email, strange possible crosslinks

Here is a very strange problem: 1. all my notifications about interac are attributed to only one person: INTERAC e-Transfer: A money transfer from X has been automatical… (read more)

Here is a very strange problem: 1. all my notifications about interac are attributed to only one person: INTERAC e-Transfer: A money transfer from X has been automatically deposited. Under correspondents I have Y, no matter what X is. 2. When I do a global search for INTERAC, all notifications show up, but attributed to Z, different from X and Y. Further, Z only sent me an interac transfer once, maybe 10 years ago. Indeed, if I global search for Z, none of the interac notifications show up. 3. this is ONLY on Thunderbird, not at the server.

Any ideas?

Asked by gena4 4 months ago

Answered by sfhowes 4 months ago

  • Imetatuliwa

Thunderbird times out when sending emails

Good morning. I need help with sending emails in Thunderbird. The problem has existed for a couple of days now and is confusing as some emails are sent and others fail. … (read more)

Good morning. I need help with sending emails in Thunderbird. The problem has existed for a couple of days now and is confusing as some emails are sent and others fail. I am receiving mail OK. Details of my setup are :- I am using a HP All-in-one desktop running Windows 11 with Norton 360. My Thunderbird account settings: Server type: IMAP mail server User name: ****@gmail.com Server name: imap.gmail.com Port: 993 Connection Security: SSL/TLS Authentication: OAuth2 Outgoing Server (SMTP): Google Mail – smtp.gmail.com (Default) User name: ****@gmail.com Port: 465 Connection Security: SSL/TLS Authentication: OAuth2

The problem: I only recently set up Thunderbird and at first it seemed to working OK. However, now when I try to send a message, after some time, I the following error message :-

"Send Error Message Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) smtp.gmail.com timed out. Try again."

What is particularly confusing is that some messages are being sent. I have tried several fixes that I found from the Mozilla, Google and Norton web sites but none of the fixes resolved the issue. Any assistance would be very much appreciated.

Regards Mike

PS: I have 2 email accounts set up in Thunderbird. I just tried sending a test message from the Gmail account to the Bigpond account. From the Gmail account it appears to have been sent but in the Bigpond account an error message appeared as follows :-

"Could not connect to the mail server smtp.telstra.com; the connection was refused."

I don't know if this is a related issue or I have another one to resolve.

Asked by Mike Flint 4 months ago

Answered by christ1 4 months ago

  • Imetatuliwa

Authentication Failure - Comcast email account

I have several Comcast.net accounts that I have set up in Thunderbird. About 2-3 times per week, Thunderbird makes me re-enter one or more of my passwords, only for the … (read more)

I have several Comcast.net accounts that I have set up in Thunderbird. About 2-3 times per week, Thunderbird makes me re-enter one or more of my passwords, only for the comcast accounts. It says Authentication Failure, but I have not changed anything on the accounts, including passwords. Entering the same password works - for a while. Any idea how to stop this?

Asked by Kennymsq 4 months ago

Answered by Kennymsq 3 months ago

  • Locked

Cannot send messages

I posted this the other day and have had no reply or I maybe cannot find the thread. Please help. I cannot send messages from Thunderbird since it was last updated on m… (read more)

I posted this the other day and have had no reply or I maybe cannot find the thread. Please help.

I cannot send messages from Thunderbird since it was last updated on my pc. Version 115.12.2 (32 bit). I have checked the server settings and they have not changed in years. I have been in touch with Virgin Media, my service provider, and I can send emails when logged on to my account and not involving Thunderbird. I can also send emails from my mobile phone using Gmail. The issue would seem to be with Thunderbird and this recent update. Please point me in the right direction, bearing in mind I am not particularly computer literate.

Asked by billbrysland 3 months ago

Last reply by Wayne Mery 2 months ago

  • Imetatuliwa

Slow Unified Inbox Load

Hi, I am running Thunderbird 115.10.1 (Flatpak) on Ubuntu 20.04. (no extensions except birdtray) I have 4 email addresses added to my TB, and I like to see all of them t… (read more)

Hi,

I am running Thunderbird 115.10.1 (Flatpak) on Ubuntu 20.04. (no extensions except birdtray) I have 4 email addresses added to my TB, and I like to see all of them together, therefore I am using Unified Folders. When I am accessing Unified Inbox, TB is very slow and basically frozen until it loads this folder (often a pop-up appears that 'TB is not responding'). it takes between 30-60 seconds to load my emails (either on start-up, or clicking on another folder, then going back to Unified Inbox). Every other folders open almost instantly. I have to admit I have a lot of emails in the Unified Inbox (~20K), however the inbox of my main email has 18K, and accessing that folder separately is instant. So any operation, other than opening Unified Inbox, is quite snappy.

This issue persists since I upgraded to v115, even when I did an OS reinstall (also tried installing apt (v115.11.0)).

I have seen this answer: https://support.mozilla.org/en-US/questions/1428374#question-reply however, nothing changed by resetting the folder.

Asked by Szilárd Molnár 3 months ago

Answered by Szilárd Molnár 2 months ago

  • Imetatuliwa
  • Archived

Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile.

when clicking an email link this is shown "Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird proce… (read more)

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

Asked by johannes 7 months ago

Answered by johannes 7 months ago

  • Imetatuliwa

unable to receive e-mails since 30/05/2024

Good morning. I have been unable to receive e-mails since 30/05/2024. Has the fact that I received an e-mail message from "Mail@voice" <mboudreaux@firmgroupagency.com&… (read more)

Good morning. I have been unable to receive e-mails since 30/05/2024. Has the fact that I received an e-mail message from "Mail@voice" <mboudreaux@firmgroupagency.com> on 31/05/2024, got to do with the problem. I would be grateful could help solve the problem. Thank you. Emyr Davies.

Asked by emyr330 4 months ago

Answered by emyr330 3 months ago

  • Imetatuliwa

After Thunderbird Update, it would not connect to one mailserver: imap.mailfence.com.

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After u… (read more)

When I launched Thunderbird today, it would not connect to one mailserver: imap.mailfence.com. At the same time, Thunderbird said to restart to update to 115.2.2. After updating, it still refuses to connect. There is nothing wrong with Mailfence and I do not find anything wrong with the configuration settings in Thunderbird. I even tried to set up my Mailfence email account again but it failed because it could not connect. Ideas? Thank you.

Asked by Larry Crites 3 months ago

Answered by Larry Crites 3 months ago

  • Imetatuliwa

Thunderbird duplicate downloads

Not used Thunderbird for about a week as was away. On my return I am now getting duplicate downloads every-time I open Thunderbird on my desktop using Windows 10. I am on… (read more)

Not used Thunderbird for about a week as was away. On my return I am now getting duplicate downloads every-time I open Thunderbird on my desktop using Windows 10. I am on Thunderbird version 115.12.2. I have been using Thunderbird for a long time and this is the first time this happened.

I recreated the global-message-db.sqlite indexfile, turned off my anti-virus, compacted folders but nothing solved the problem.

However I did find a similar question on this site with a solution which wasn't exactly the same but lead me to investigate the Mail folder in my profile. I see I am getting duplicate pop.gmail.com folders (pop.gmail.com, pop.gmail-1.com, pop.gmail-2.com, etc.). I guess that is probably connected to the problem.

When I open Thunderbird I also get the message 'Connection to server pop.gmail.com was reset'.

Any help would be appreciated. I didn't want to delete any pop.gmail.com folders without expert advice.

Thank-you in advance.

Asked by TheArtist 3 months ago

Answered by TheArtist 2 months ago

  • Imetatuliwa

Receiving error message: Your Thunderbird profile cannot be loaded. It may be missing or inaccessible.

I am using Windows 10 Home on an HP laptop. Some months ago, I began getting this error message when trying to start Thunderbird: Your Thunderbird profile cannot be loade… (read more)

I am using Windows 10 Home on an HP laptop. Some months ago, I began getting this error message when trying to start Thunderbird: Your Thunderbird profile cannot be loaded. It may be missing or inaccessible. I've been slogging along using my Gmail reader since then but I need my address books from TB for my business. I really need to get this fixed.

I've read all the questions/replies on this and have uninstalled and reinstalled TB. My Appdata/Roaming/TB file only has 5 files in it: Crash Reports, Pending Pings and Profiles plus a couple of 1 KB config files. Don't know if this is right or not.

When I search the Profiles folder using .ini, I get this Notepad info:

[Install8216C80C92C4E828] Default=C:\Users\*\Documents\yvfr1fi4.default Locked=1

[Profile3] Name=thunderbird IsRelative=1 Path=Profiles/kavosmqu.thunderbird

I have this yvfr file on a thumb drive and I tried uploading that into the roaming/TB file but I still get the same error message.

Any help greatly appreciated! Thank you.

Asked by 42skidoo 3 months ago

Answered by david 3 months ago

  • Imetatuliwa

Thunderbird and gmail

I recently changed my google account/ gmail password. Since then I cannot send gmail via thunderbird. (I can send others hotmail etc) I can receive mail. I can send gmail… (read more)

I recently changed my google account/ gmail password. Since then I cannot send gmail via thunderbird. (I can send others hotmail etc) I can receive mail. I can send gmail via the gmail web browser. Sent gmail mail then shows in thunderbird.

I get the following message when sending email in thunderbird: Login to server smtp.googlemail.com with username sjagutpal@gmail.com failed. Enter new password I enter my new password. Fails again.

Sending of the message failed. Unable to authenticate to Outgoing server (SMTP) smtp.googlemail.com. Please check the password and verify the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'

note: IMAP server settings is OAuth2.

please help ?

Many Thanks...

Sanjay sjagutpal@gmail.com

Asked by Sanjay Jagutpal 3 months ago

Answered by Matt 3 months ago

  • Imetatuliwa

June 2024. CAN'T SEND ON THUNDERBIRD

I can't SEND on Thunderbird as of Update to Version 115.12.1 on 6/19. I was able to SEND on June 18th and left town for a week and when I came back could not Send. That… (read more)

I can't SEND on Thunderbird as of Update to Version 115.12.1 on 6/19. I was able to SEND on June 18th and left town for a week and when I came back could not Send. That could be a coincidence. Have Windows 11, with Defender Firewall and Security virus protection. I have TB version 115.12.2 up to date. I have checked with Spectrum for the correct configuration and currently I have as Description: SMTP Server (on top line); Server Name: Mail.brighthouse.com and Port 465, No Authentication and SSL/TLS. My User Name: e-mail address ends in @tampabay.rr.com and that is the same as shown on incoming server.

My husband just downloaded TB program on his Windows 8.1 which is my old computer that I've been running TB on for 15 years without a hitch!! ''''And he also cannot SEND.'''' It's very frustrating - we've tried changing server settings since Spectrum uses not only Brighthouse (which is the one they say covers the Tampabay.rr.com address) but they also use Mobil.charter.net and also TWC.com. I've tried changing them up but nothing works. I've tried changing Ports and anything I could change I did, but nothing works. I did get a couple of error msgs but they didn't help. Brighthouse timed out and another msg was saying that the email address I was sending as had to match the email address of the authentication and that didn't make sense as I have only had one address & (typed correctly in all places). I have called Spectrum more than once and asked for an upper level, however, they were no help at all saying they have no resp. for 3rd party etc. I HOPE YOU CAN HELP SOLVE THIS MYSTERY. Thank you!

Tabatha

Asked by TABATHA \ 3 months ago

Answered by TABATHA \ 3 months ago

  • Imetatuliwa

Thunderbird email

My outgoing email stopped working suddenly. Incoming email works fine. I sent an email with a large attachment. It sent but after that I could not send anymore emails. I … (read more)

My outgoing email stopped working suddenly. Incoming email works fine. I sent an email with a large attachment. It sent but after that I could not send anymore emails. I checked my password and server settings nothing has changed except I can't send email. I get a pop up window that asks for my password but after entering my password and hit enter I get another pop up window that says login failed please enter new password. The password works fine when I go AOL mail and enter it.

Asked by orionstarman 3 months ago

Answered by christ1 3 months ago

  • Imetatuliwa
  • Archived

Blank email tabs following Thunderbird crash during close

Thunderbird crashed during a normal close (https://crash-stats.mozilla.org/report/index/3c0242b0-1a55-4eba-9f02-4a7bc0240126) and since then when I open Thunderbird, tabs… (read more)

Thunderbird crashed during a normal close (https://crash-stats.mozilla.org/report/index/3c0242b0-1a55-4eba-9f02-4a7bc0240126) and since then when I open Thunderbird, tabs appear for the messages I had open at the time of the crash, but they are all blank, and the tabs themselves are all empty. It is as if they are place-holders that are then never populated. I've attached a screen shot showing some of these tabs, with the crash report tab open and displayed.

About 1-2 months ago I reindexed folders due to mail apparently being missing and this resulted in a huge number of messages that had previously been dealt with becoming marked as unread again.

Ideally I would like the blank tabs to be reinstated and to be able to carry on working on my email from where I left off, but if this is not possible, I need to be able to identify the emails that were open in the tabs to be able to pick up the pieces. This is crucially important as I operate multiple accounts and it would be impossible for me to re-establish state any other way, especially in view of the earlier problem with email becoming marked as unread again. That would condemn me to needing to re-open many thousands of email items to identify those that may need action.

I renamed global-messages-db.sqlite which has been recreated and rebuilt but nothing has changed. The rebuilt file is significantly smaller than the original and if this implies that there has been data loss, I would rather reinstate the original file, if it is safe to do so.

My best guess is that the tabs are defined within history.sqlite and I have made a copy of this file but superficially it appears to contain a lot more than just tabs and it has been updated since the crash.

The most recent change I made to my Thunderbird configuration before the crash was the addition of the British-English dictionary.

The next most recent change to my Thunderbird configuration was the addition of a Proton Mail account using Proton Mail Bridge. I am accessing this account on behalf of someone who has sustained serious injuries and is unable to access it themselves. If this added account or Proton Mail Bridge is implicated in the crash in any way, I would prefer to remove the account and the Bridge software.

Many thanks in advance for your help and guidance with this problem.

Nikita

Asked by Nikita 8 months ago

Answered by Nikita 8 months ago

  • Imetatuliwa

HDD failed. knocked out Thunderbird. Now I keep getting "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible."

as stated in the title, my HDD failed the other day and on recovery, my Thunderbird seems to have failed too. I know (sort of) that it is all driven by the Profile.ini f… (read more)

as stated in the title, my HDD failed the other day and on recovery, my Thunderbird seems to have failed too.

I know (sort of) that it is all driven by the Profile.ini file.

But everytime I relaunch TB (even after what I think is an uninstall and a reinstall) I am getting : "Your Thunderbird profile cannot be loaded. It may be missing or inaccessible."

I would be happy enough to have a blank TB load up and I would reconfigure my various email accounts. but I cannot seem to do even that.

I know there is a trick to getting to a Thunderbird configurator....but I have forgotten what it is.

Where does TB "look" when it starts up? how would I control that?

Asked by pjstock 3 months ago

Answered by pjstock 3 months ago