I-Thunderbird Isithangami Sokwesekwa

How do I do this? Cox Communications is divesting itself of Email. Thunderbird is my client for my Cox email. It appears Cox has a data package which I need to import to Thunderbird or Mozilla and i need advice on how to do this? I am at wits-end on this issue, I would like to keep chaz4@ cox.net and ocal9@cox.net or switch them to mozilla.org or at least for a while forward them to chask14@yahoo.com. But if non of these things are possible, I guess I will have to stop using either email address. If you are a Human and not a machine, please send your response to chask14@yahoo.com as chaz4@cox.net may not be working anymore.

Hello, I did look for related posts but found nothing close enough to this so I thought I would create a post. I don't ever recall having this issue before v102 was introduced but now it happens once in a while but not always.

If I am in the inbox of my main mail account and choose to delete a message, it goes away and then reappears almost immediately. There is a box that shows up at the bottom right of the screen that says: The current operation on inbox did not succeed. The mail server for account (my main mail account is shown) responded: UID MOVE failed. This account is in Canada on the Bell Canada network so perhaps it is an ISP issue?

I have 3 mail accounts set up - all IMAP. If I close TB and reopen it, the message is gone as if it required the program to close in order to complete the delete request.

If anyone has experienced this and has any suggestions or tips, it will be greatly appreciated. - Thanks, Mike

I have three different computers that I can use Thunderbird to access my hotmail account. All three computers can have the exact same server settings. One computer refuses to send emails unless I cancel the send and immediately resend.. Thunderbird ver 115.10.1 (64-bit) Windows 10 Home Ver 22H2 IMAP Mail Server outlook.office365.com Port 993 Connection Security SSL/TLS Authentication 0Auth2 Outgoing SMTP Server smtp.office365.com Port 587 Connection Security STARTTLS 0Auth2 Take Note All three machines can have identical settings listed above or various changes like Normal Password instead of 0Auth2 and/or an Outgoing server can be smtp-mail.outlook.com with normal password or 0Auth2... One computer must be cancelled will sending and when resent, it goes... no problem...immediately. If I don't cancel and wait, for it to send on the 1st attempt, it will eventually timeout on the outgoing server. Then I might have to reenter a password. Very annoying. I have been doing this for years. It is my workaround....

Since a recent UPDATE, there are NO emails showing in the SENT BOX, or any of the FOLDERS including an important one labeled TAX RECEIPTS!!! The only boxes which show emails are the INBOX and the DRAFT BOX. After depending on Thunderbird for 20 years, I now have to use WEBMAIL. OH DEAR, Can you please help me. I am a nearly 80 year old grandmother who wants to email her grandchildren in GERMANY. PLEASE HELP!!

My internet provider in Phoenix, Cox, has now handed its email services over to Yahoo. Prior to this, I accessed my Cox email (@cox.net) using Thunderbird. I am a technological dinosaur and am trying to figure out how to migrate my new Yahoo email to Thunderbird. I had a friend set up my Cox mail in Thunderbird but he is not available now. I am clueless how migrate my Yahoo mail to Thunderbird. I appreciate any help that the community can give me.

I was able to change some of my message pane background by adding the following to the userContent.css file:

/* Thunderbird userContent.css */

@-moz-document url-prefix("imap:"),url-prefix("mailbox:"),url-prefix("news:") {

 body {
   background-color: #404552 !important;
 }

} @-moz-document url-prefix("about:blank?compose") {

 body {
   background-color: #404552 !important;
 }

}

I also tried adding the following to my userChrome.css file: /* Message pane */

1. msgHeaderView {

 background-color: #404552 !important;

}

1. messagePane {

 background-color: #404552 !important;

}

Why do I still get these two dark gray areas (see attached)? What css do I need to add to get them to be the lighter grey?

Hi there,

I'm having some difficulty getting my email signature for my new job set up correctly.

I want the company logo to appear on the left, with my details to the right of the logo, as seen in the first screenshot.

However, currently, the text appears incorrectly underneath the company logo. I have tried pasting the signature into a blank email, generating the HTML code and pasting that into the signature text box, yet it still displays incorrectly when sending an email.

The HTML for my email signature is as follows:

<tr>

 <td style="width:141.5pt;padding:0cm 5.4pt 0cm 5.4pt" width="189"
   valign="top">

 </td>
 <td style="width:6.0cm;padding:0cm 5.4pt 0cm 5.4pt" width="227"
   valign="top">

James Surname

Write + Rise = Wrise

Email: <a href="mailto:james@email.co.uk">james@email.co.uk</a>

Phone: 0161-533-0593

Website: wrise.co.uk

 </td>

</tr>

Any guidance you could provide me with would be gratefully received!

Many thanks, James

I've been having trouble trying to copy text to the clipboard (in all programs, not just TB) and fiddling around yesterday while trying to copy a paragraph from a TB message to insert it into a Word document, I've unintentionally b* up TB's inbox display. Previously it showed message headers on the left and senders on the right, in bold if as yet unread, and all close set (no spaces between lines). Now however it shows them in table form, with sender and header on the left end of each cell and the date at the right end. What do I have to do to restore the original display mode?

Hi, I have Windows 11, Intel processor, 64 Gb RAM, TBytes of SD storage. Lately I have been experiencing issues displaying email with attachments. It is intermittent, but occurs when I display an email with one or more attachments such as PDFs. I have a preview window open to the right of my mail list. If I click on the item in the list I see a properly formatted email in the preview window .. for a few seconds. Without me touching anything, the mail converts to HTML and the attachment is gone. Redisplaying the item goes right to HTML. Further, the HTML has nothing to do with the original message. If I go to my mail server the original item might still be there, but it might be gone. I have not seen a pattern to determine why some are gone. I need to solve this. I don't see this problem described in previous posts.

Attachments: tbird_before.jpg - preview email with attachment (personal data obscured) a few seconds later it switches to tbird_after.jpg and I cannot get the email back.

Kenneth Kornblum

Hi, Excuse my poor English (I am French). Linux Mint 21.3 Cinnamon (64), Thunderbird 115.9.0 (64) no added module - Installation from the Mint list of software. My problem : regardless of the provider (Proton, Gmail, Outlook, GMX - in IMAP), the message menu bar (see <https://support.mozilla.org/fr/kb/personnaliser-la-liste-des -messages#thunderbird:linux:tb115>) does not appear. How to make it reappear ? I think I have tried all the configuration menus and possible right clicks within Thunderbird ; I haven't found anything on the Net ; starting in safe mode did not change anything. I come from Windows 10 where I didn't have this problem. Thanks in advance for your help

Can't print emails or any saved Thunderbird files. I click on FILE>PRINT and get the print preview, butwhen I click on "PRINT" I get a "printer offline message". I can print from Microsoft Word or PDF files and any other program. It appears that everything worked well until the latest Windows update was installed.

I am using an HP printer and print via HP's Smart Print software which I believe is the default. I'm not sure if this is a Thunderbird issue or another screw up by Microsoft.

Thanks for your assistance.

I keep several email tabs open that have topics I am currently working on with clients. Recently they have been turning blank, so I have no idea what they are--I feel I have lost info that I need to do business. Why do they turn blank? I need this fixed ASAP!

when I try to start Thunderbird, I get a window that says "Your computer must be restarted to complete a previous upgrade Thunderbird. Do you want to reboot now?. I've rebooted several times now, scanned with PC Matic, rebooted again, tried to uninstall in Control Panel, and get the same window. How do I fix this?

Hi,

I have both gmail and btinternet accounts feeding in to Thunderbird. I can send emails from my bt account but not from my gmail account. When I try to send a gmail message a pop up informs me that the out going server for gmail has timed out. I have checked the server settings for gmail's out going server and it is set up as Thunderbird states but the problem persists.

Can anyone help to solve this problem please?

I have created two lists of email addresses to which I want to sent the same email. However I can't get the list into the address bar either To. CC or BCC. As there are some 20 addresses typing each address in the list, I had hoped that I would not have to type all of these again each time I send out an email. Any help would be most welcome.

My question concerns the portion of the screen that displays the list of new and existing emails. I used to grab the up/down arrow and could shrink that portion down to 4 lines of emails. This allowed me to have a bigger area of the screen for viewing individual emails. Now I can't get it to display less than 8 lines of emails. Help please.

Hi.

I've just installed the latest version of Thunderbird on a clean copy of Windows 11.

Thunderbird comes up with no buttons across the top (Get Messages, Write, Print, Address Book, etc).

I can't see an option for displaying them.

Any suggestions please?

Thanks, Dave.

Hi,

I created a backup of my Thunderbird profile including various email accounts and calendar. I used the build in export function of Thunderbird to create this backup. Unfortunately the file is slightly bigger than 2GB.

I had a severe copmputer crash now and I wanted to import the backup. It turns out that the zip-achive is damaged. I cannot unpack it with any zip-software and also repairing the archive with winrar did not work.

Is there any chance that I can at least restore some of the information?

Best, Robert