I-Firefox Isithangami Sokwesekwa

The increase happened here: /storage/permanent/chrome/idb/3870112724rsegmnoittet-es.files/

79 files taking 590MB created in 3 minutes, out of nowhere. Why were all these large files created?

Using Linux Mint, Firefox 125.0.2

Whenever I type in a website URL in the search-bar, first of all, the drop-down menu of related searches and websites does not show up. When I press enter to confirm that's where I want to go, nothing happens. The URL just kinda sits there, no loading circle or anything... Just a blank page. Only two of the icons on my toolbar works. The "Account" icon, which takes me to my Firefox settings. And my Extensions icon. Clicking the three little lines does nothing. The only websites i have been able to get to work at all are the settings page, and the Firefox troubleshooting page. I'm using Version 125.0.3, I tried using the browser both with and without hardware acceleration with results being unremarkably the same. I restarted Firefox and my computer multiple times to no avail, and the only thing I could find out of the ordinary was an error with Importing data from Microsoft Edge, which was not something I consciously wanted to do, but there was an error that popped up regarding that when i went to the settings page.

All that being said, I'm confused and at a loss for options, and could really use a Mozilla Staff member or someone who knows what they're doing to work me through this.

Hello, have been scratching my head for a while on this one. Have a freshly setup install of Debian 12, using Sway (wayland) as my Window Manager. I am really struggling with slowness in Firefox, page loads take easily 15 seconds whereas loading the exact same page in another window at the same time with Chromium Debian build has near instantaneous load times. I've tried the following troubleshooting steps: - Created a new firefox profile - Tried "Troubleshooting Mode" in Firefox - Disabled ipv6 in firefox about:config and in Debian - Tried different DNS servers - Tried different non-debian specific builds of Firefox - Tried Firefox Beta and Firefox Nightly for Debian

None of these steps made any difference, and Chromium has continued to be significantly faster. Am really stuck here and would love to get to the bottom of this as Firefox is the only browser that works with a HiDPI display in Sway without blurryness. Happy to provide any and all diagnostics and reports that are needed. Thanks in advance!

EDIT: It seems to be some kind of networking issue, using a VPN solves it. But still doesn't explain why Chromium would behave differently.

After installing Thunderbird i had first download problems for new Firefox Versions. I tested around, installed everything new and found the solution. Somehow the Maintenance Service didn`t work properly on my machine and after deinstalling and restarting i can update firefox again. Problem remains: When trying to install Offline Languages , see picture, i get the message that it does not work. I tried everything possible, including reinstalling and deleting all old profiles (was a lot of work). Any ideas?

Dear Mozilla:

It is SAD that the OS I have will no longer be supported due to exploits.

Considering the # of exploits, backdoors, poor coding, etc., in the later Windows OS versions - 1 would truly think that supporting the older and MUCH more secure Windows OS's would be wise.

Yes, they have "holes", but overall much fewer than current OS's.

Plus, the bad actors are very busy exploiting 10 & 11 and pretty much have ignored the prior versions.

Question... what if a major exploit is found that affects all OS's from 11 down to unsupported?

Will Mozilla make sure to supply a patch to the unsupported due to the danger of the new & serious "hole" found?

I vote... it would be wise to maintain a small contingency of legacy developers to help those who cannot buy new systems or flat out HATE the UI & UX of the 10 & 11.

Makes sense?

BROWSER NO LONGER CHECKS FOR UPDATES (automatic or prompted via HELP>ABOUT) RUNNING 125.0.1 (64-bit) WITH WIN 10 PRO, VPN on or off running NORD 7.22.3.0 Thoughts, or is this now normal? Tks erik

• Bulleted list itemI understand! You're asking how to use Mozilla Firefox or Safari. Here are some basic steps to get you started:

Mozilla Firefox:

1. Download and install Firefox from the official website. 2. Open Firefox and set your default search engine and homepage. 3. Use the address bar to enter URLs or search queries. 4. Explore the toolbar for bookmarks, history, and extensions. 5. Customize Firefox with themes, add-ons, and settings.

Safari:

1. Open Safari on your Apple device (it comes pre-installed). 2. Use the address bar to enter URLs or search queries. 3. Explore the toolbar for bookmarks, history, and sharing options. 4. Customize Safari with extensions, settings, and privacy features. 5. Use iCloud to sync bookmarks and history across devices.

If you have specific questions or need further assistance, feel free to ask!

The fundamental nature of dementia and Alzheimers is that the victim cannot remember new information. But for some time they can recall information and processes which were learned previously.

After some years, they will be unable to utilize any of the technology they depend upon - they will not be able to turn on their device to make a phone call. They won't be able to locate the menu they need to utilize. Because all that changes CONSTANTLY. They will become helpless sooner than necessary. They will strain their families and the taxpayer sooner than necessary.

The only solution is for software makers to roll out, every 5 or 6 years, a "stable version" where the user interface will not change one iota for 25 years. Of course, they must still make internal updates for security and changes in the Internet Protocol layer system. The portions of the code that deal with the user must be modular to be plugged into newer hardware and communication protocols.

When someone is diagnosed with memory impairment, they will have time to learn the latest Stable Version.

This is a very fundamental change to business as usual, but there is no other solution other than continuing to balloon the cost of elder car.

In the old days this would be a call for an RFP...

I'm using Firefox 124.0.2 (64 bit) on Windows, and every few days I get the error about using an older version of Firefox, with Exit or Create New Profile options. I then run "firefox -allow-downgrade" from the command prompt and everything works fine... for a few days, when it happens all over again. This only started happening a couple of weeks ago, but it's getting really annoying. How do I stop it (short of using something like Waterfox or Brave).

I want to delete firefox logins info and to make sure passwords and logins are never stored. I go to passwords, open up menu, and the "remove all passwords" choice is greyed out. How can I get that choice it be valid and to impliment that operation?? And to never have these stored??

Hello support,

is there any way (other than the one plugin I found that did not work for some reason) to adjust firefox' general brightness (or that of an individual tab) ?

Also changing my monitors brightness would not work for me as I am trying to test a website I develop (using firefox to visualize it) and it is rather just the large difference between my editor (which's brightness you can not adjust) and the browser that is very unpleasent when I switch back and forth (like when trying to fix a bug).

Kindest regards.

Jonas Behr

I have accidentally end up with two FireFox accounts. I want to combine them, but I can't change either account to the other one because FireFox tells me that the replacement email/account is already in use. How do I get around this?

When I use the `--search` CLI option, Firefox searches the supplied term in a new window.

I want it to open itself in a new tab instead, so I tried out the following combination of CLI options:

``` $ firefox --new-tab --search "example" ```

Firefox does search for the given term, but it opens itself in a new window instead of a new tab, thus ignoring the `--new-tab` option.

Am I doing something wrong?

I simply want to use a password to open Firefox. I don't want to set up Firefox sync. How can I set up a simple password as permission to open Firefox without accessing sync?

hi

i just got firefox setup just as i want so dont want to reset it. yes i have used arkenfox to beef up pivacy.

only problem is i assume fingerprint disabling has made the window size like tor browser.

is there a way via the shortcut to "c:\mozilla\firefox\firefox.exe" -height 1024 -width 1600

does not work

"c:\mozilla\firefox\firefox.exe" -height 1024 -width 1600 -P default

does not work

how do i fix this? using this method? as i would prefer to do this way

alternatively prefs.js / is there a way to do it there?

simple step by step instructions please

your time and help is appreciated.

thx

YouTube all of a sudden started to slow down and only be able to load videos fast enough in 360p resolution, I tried watching YouTube on Microsoft edge and YouTube handled 1080p easily there, I have cleared the cash and made sure my Firefox and Windows are up to date and still the issue persists.

this only seams to occur on YouTube as amazon prime and speed test works without issues

A couple of months ago, I suddenly lost all my saved bookmarks, plus the ones on my toolbar. Strange thing is, all the folders and sub-folders I created are still there, they're just all empty.

Can I get them back somehow? I've been collecting them for years so can't replace them all!

Firefox 125.2 iMac OS x10.15

Everytime i try to watch a video it says it can't play or it just sits there buffering. Youtube works but only lower quality, but every other site i go on doesn't. Twitch won't load, other sites show Error Code: 102630. This is only a problem on my browser on my windows pc I have. On mobile the browser works great and has no problem showing videos so it a problem for my pc browser.. I've tried all of the steps, i've updated, i checked drm and even went into config to check there. But nothing works, it still can't load videos. I have version 125.0.3 and for me it's the latest one. I even turned off all of my add-ons to check if it works or not but nothing there either. It worked before, just now the latest two months it hasn't. What can I do in order for the videos to load? Thank you for your time.