Thunderbird-Hilfeforum

Without notice, Thunderbird today required me to sign-in to my Google account and then produced a window in which it said it wanted to access to my mail, contacts and calendar; in order to compose, send, share, delete permanently, among actions on my personal content. I tried to "Deny" (see below) but the window just returned and returned and could not be deleted. (see "Uploaded images", below for the content of this window).

Is this a scam? Or the result of a hacker?

I need help with an abusive administer he only an administer because he stole my e-commerce operating system in 2017 by putting malware on to my keyboard port so no key board would type I could not stop him I was originally hacked in 2014 I shut down my system that was unopened at the time for two years until I had gone through 25 devices because the abusive administer put malware onto all my devices and ruined them this has got to stop u just won money I can’t get into my google account because he changed my password and took my phone numbers because of so I can change the password to get into it I have about 25 google accounts for this reason every time something good happens and money is involved he takes my accounts so it don’t happen this isn’t the firsts time he has done this very same thing some one has to stop this criminal He takes Money off my cards and spends my money how much more of this do I have to put up with he is not an administer he is a hacking thief and I demand help

I was subscribed to a large distribution list, but then unsubscribed. But I didn't unsubscribe. So I subscribed again, but was soon unsubscribed again! My email address and password may have been hacked. So I logged into my Comcast ISP and changed my email password. Then I started Thunderbird, and as expected, it asked for my password, and I gave it. My email came up. I tried sending an email and it asked for a sending password. I ignored it, but after a long delay, it refused to send the message. So I tried again, this time giving it my new email password. The sending then worked. I assumed all was now OK.

But, as a final test, I exited Thunderbird, and then restarted. It again came up OK with my emails shown. Then I again tried sending a test message to myself. But it again asked for my sending password! Thinking this might be a scam, I put in a password of "bullshit". Then I received the following popup message:

Sending of the message failed. An error occurred while sending mail. The mail server responded: Polite people say HELO first. Please verify that your email address is correct in your account settings and try again.

What!!! It sure seems like someone (at Thunderbird?) is in the loop grabbing my password before encoding it for storage. A similar thing happened in the past, where I think my account was hacked. So, was this a hacking attempt, and if so, was it from Thunderbird software or my Comcast ISP?

Hi, I am not sure how it happened, I am now in a position where I can't use my Thunderbird properly. Every time I open TB, it asks for "please enter your Primary Password" which I don't have/deleted? If a try to remove the tick from "Use a Primary Password" it opens a box requesting my Current Password, I have tried the last one and the one before, none are accepted. When I search in Saved logins, it seems to me to be empty. in short I seem to need a current password to change my password. It is a vicious loop. Can any one help sort this out, Please Thank you from Ilio Pieroni

I sent an email with multiple BCCs and no CCs or TOs, I put myself as one of the BCCs.

I did not receive it and I do not think anybody else did as well since I asked a few people.

The email is in the sent folder. I tried forwarding the email from my sent folder to myself as CC, and that worked. I also tried fowarding as BCC, and that worked.

So what is going on? Is BCC working? How can I know for certain? Do I need to foward the email as BCCs to all my BCCs to get this to work?

Thanks for your help.

R

I wrote an email without putting in anyone for the 'TO:' or 'CC:' fields. The BCC: field only had my own email address in it.

I accidentally sent this email before I had sorted out the TO: and CC: fields properly.

In my sent email and it had 'undisclosed-recipients' in the To: field.

I found this disconcerting, since I wasn't SURE if I hadn't put anything in the CC: or TO: fields. I worried I may have sent a rough, poorly worded email to someone and that could backfilre.

Am I right that whenever 'undisclosed-recipients' is shown in the To: field and I sent the email, I can check in that sent email who was in the BCC: field and that should re-assure me who had actually recieved a copy of that email.

Clarity in this area would be VERY helpful.

Regards

   Mark

Why is it impossible for Thunderbird to have an option to display the real senders email address instead of just the "fake" display and return address?

I use an addon to add the true address column in version 102, but as usual Mozilla upates disable useful security related updates.

When is Thunderbird going to show this essential true address instead of spending so much time changing the look and feel?

I am stuck with version 102 or another email client until this changes.

I had to change my Google account and therefore my Gmail password due to a reported security breach. I've successfully changed my password for Gmail on my iPhone and iPad but I can't on T'Bird.

I expected that when I opened T'Bird, I'd get an error message saying my password was invalid and then prompting me to enter the new password for my Gmail account. That's the way it used to work and it worked well.

Instead, I get some sort of useless error message about STAT (??) and my credentials are invalid. I get no prompt to enter the now changed password. I get no info as to WHAT credentials aren't valid.

So I opened the Password Manager, found the Gmail line, entered Show Passwords and then edit password. I entered the new password, double checked it and closed out the Password Manager. I get the same useless message about STAT. The old password was *not* the Gmail password.

I opened the Password Manager to find the password is entered correctly. Why is this simple operation so miserably difficult? The old method worked perfectly every time now this one won't at all.

Gmail is going to require OAuth 2.0 sign-in SFAIK, that means I will no longer be able to access gmail with Thunderbird. Are there plans for Thunderbird to meet the OAuth 2.0 requirement?

I have upgraded to the Microsoft 365 Business Professional email service which should allow me to continue with Thunderbird, now that basic authentication is no longer supported.

I have enabled Exchange settings. Also, POP/IMAP and SMTP are authorized in the MS 365 account, and those setting are correct in T-Bird. From within Thunderbird, a login screen for the MS 365 email account is generated when T-Bird attempts to log in to the server, but the log in just takes me to the server page in the browser.

This help article https://support.mozilla.org/en-US/kb/microsoft-oauth-authentication-and-thunderbird-202 advises that Thunderbird may need to be authorized. I followed the link, but was not able to make it work.

Given the following provided link, what is to be used for {tenant-id} ? https://login.microsoftonline.com/{tenant-id}/adminconsent?client_id=9e5f94bc-e8a4-4e73-b8be-63364c29d753

Any other advice? Thank you very much!

Network Solutions upgraded their email, and I multiply-checked all my settings in Thunderbird (102.3.2) and can retrieve mail but the outgoing mail hangs and time out with an error. I just discovered it's not my settings, but there's no password listed for the default outgoing SMTP server (my own domain). (I have 2 email accounts, and listed in the "Saved Passwords" are 2 passwords for incoming IMAP plus one the other account outgoing SMTP, 3 total.)

Is there any way to add a password without deleting the default server and then adding it back in, or some other solution?

Thanks

Hello, I received a Yubikey 5 and all is working fine using GPG with it, except integration with Thunderbird on Windows.

I followed this guide: https://wiki.mozilla.org/Thunderbird:OpenPGP:Smartcards including 64 windows section

I was able to successfully send mail to myself, but then thunderbird failed at decrypting this message: Thunderbird is indicating that key is not available and I see no prompt from gpg-agent. Key is correctly declared as GPG external.

If I try to decrypt tis email by storing it on file and using gpg in command line, it works fine: agent is asking for Yubikey PIN and gpg is decrypting the message. But this is an awful workaround, not user friendly at all.

I also did sanity check by sending to myself a message encrypted with a key generated by Thunderbird: all is working fine, the message is decrypted within Thunderbird.

=> How do you make Thunderbird decrypt message encrypted with key stored in Yubikey? How do you make the gpg-agent called by thunderbird?

Hi

I'm trying to set up another email account but the Confirm Security Exception dialogue is preventing it. The exception is already stored but still keeps asking and when I reconfirm the dialogue flashes off/on and doesn't not disappear preventing the set up of the account. I have other emails from the same host and have not had this issue before. Anything I maybe doing wrong or bug? I've added a screenshot.

Many thanks Alan

Hi,

I used to use Thunderbird to access Gmail, Yahoo mail and normal email account (all POP3).

I have updated (not reinstall) Thunderbird to the latest version since Gmail disabled non secure apps access.

I have changed the Authentication to OAuth by follow the instruction from your page, but the system keep asking me to login (I have grant access in Gmail).

This happens not only Gmail as well as my Yahoo mail and normal POP3 account. I am sure the password is correct and still cannot get my emails from all of my accounts.

I also notice the token/password has not been saved to the system in Saved Password session. ( I have tried to run as administrator but still doesn't work.)

What have I missed? Can still using POP3 method to get email if problem solved?

My current system is Win7 with Thunderbird 32bit installed.

Thanks!!

Outgoing email includes the user-agent header. I would like to disable or modify the string for better security.

User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.8.0

Thanks...

I received the following from my e-mail provider, and as a total dumbo about this, want to ask if I need to do anything about this in Thunderbird (Linux). As far as I can see, my e-mail account in Thunderbird is set to POP3, encrypted using SSL/TLs, normal password - can anyone tell me if this is OK - Thanks.

Quote: "We are contacting you because one or more of your devices or programs uses the TLS 1.0 and/or TLS 1.1 encryption protocols to connect to our mail.com email servers, or is using an unencrypted connection. This involves either access via SMTP (sending emails) or retrieval via POP3/IMAP (receiving emails).

Unfortunately, the TLS 1.0 and TLS 1.1 encryption protocols are outdated and no longer meet current security standards. To protect your email communications, soon we will no longer allow access to our mail.com servers with these outdated protocols. Unencrypted access will also no longer be possible.

After the protocols have been deactivated, the transfer of emails between your affected device or program and our mail.com servers will no longer work; i.e. no emails will be transmitted to or from your mail.com email account using TLS 1.0 and TLS 1.1. Furthermore, unencrypted SMTP/IMAP/POP3 connections will no longer function. In other words, as of Oct. 5, 2022, it will only be possible to connect if TLS 1.2 or TLS 1.3 encryption is in place." Unquote

Hello,

I am using the latest stable release of Thunderbird client on Windows 11 and just today it's been asking me multiple times for a password to my Outlook account. I have kept adding a one time app password through the official Microsoft website under account management but it's been asking a few times that it needs a password.

Do you know if there's been any outages to the Microsoft servers or what this issue could be related to? Is there a way I can send any logs directly to you that might help find the issue?

Thank you for your time.