Thunderbird Forum podrške

I use Google Workspace as my e-mail provider, and Thunderbird (PoP3 -- there is a good reason why I use PoP and not IMAP) as my e-mail client. This has worked very well for a long time. Yesterday (4/12/22) updated TB from 91.7.0 to 91.8.0. Previously, I would enter my Google Workspace password (only, once per session) to download mail, and my gmail password (only, once per session) to send mail (using Google's SMTP server). After the update, I was asked for both username and password to log into the Google Workspace account, and every time I sent an e-mail I had to provide both username and password for the gmail account. Fortunately, I had set a restore point before the TB update and was able to restore my system to its normal operation. Can you please help me with what is going on, and how to get back to normal operation under the new update? Thank you!

I'm running Windows 10 Pro 10.0.19044 build 19044 (21H2)

Suddenly .... Folders show that they contain messages but the message list window is empty. If I '"repair folder", the list of messages is restored. But i have to go through that painful process for each folder, and i have many accounts and folders. And if Tbird is closed and reopened, the problem still exists - even 'repaired' folders do not display their messages.

Version 91.8.1, Win 10

I have only ever had one email address on Thunderbird for the last 17 years or so and now I have added some more email addresses. Each email address is listed on the left, however, in other email platforms there is a generalised view with inbox, sent., deleted etc., on top of the separate email addresses so that you can see what's come in or gone out without going to each address and dropping down the menu on each one to see if you have emails. Is there a way to arrange this so that one has a general view of all one's email activities on top of the individual addresses just as they have in Outlook or Apple Mail please?

I have been getting this for a month or so. Thunderbird checks all 4 email addresses I use with my PC (I have one for mail, and 3 I use only for e-transfers between banks). This popup always shows one of the banking addresses. When I click Next is asks me for email address. No matter which one I put in, it fails. So now I just accept that I must X it off every time I start Thunderbird. I use MailwasherPro to check all my email every 10 minutes and reject all the mail I have blacklisted. I think it uses iMap to check the mail, then Thunderbird uses POP to down load mail and delete it from the server. I just checked my password for the troublesome account and found it was incorrect (?). I corrected it but I still get the Google popup. I've gotten used to having to X off the popup before I can read or write mail, but I'd still like to solve the problem. I tried the suggestions in the replies to the 2020 question, but no luck.

One of our Emeriti Professors using Thunderbird of a Mac can use the space bar when typing text. The space bar deletes text.

Is there an over write mode in Thunderbird for Mac? If so, how is it turned off.

typing works correctly in word and other programs. Thanks!

For weeks, I have been searching everywhere for a definitive method for transferring my Thunderbird 91.8.1 profile to a new PC. There are lots of posts mainly covering windows applications and older versions of Thunderbird. One reoccurring problem seems to be that some installations have 2 profiles. Some have a profile with just a xxxxxxxx.default profile and others have a xxxxxxxx.default-release and a xxxxxxxx.default profile. It would appear that if you have the 2 profiles then the .default-release would be the one you would use for transferring to a new PC. I was wondering if some one could lead me to a current definitive procedure, for transferring a Linux based Thunderbird 91.8.1 profile, from one PC to new Linux PC . What to do if you have the 2 profiles? Can you just delete the yyyyyyyy.default profile?

Perhaps some one could comment on the following procedure that I have cobbled together from the myriad of posts that I have read.

THIS IS MY VERSION (UNPROVEN) Transfer Thunderbird (91.8.1) profile to new PC [v_4]

On your SOURCE computer [Linux Mint Cinnamon 20.3]

       1. Connect a device for data transfer, either a USB flash drive, or a USB SSD/HDD drive. 

       2. Open the Home directory and click the “View tab” then check the box “Show Hidden Files”.

       3. You should find a directory called .thunderbird. 

       4. Open .thunderbird and look for the folder, xxxxxxxx.default-release. Note; the x represents a string of 8 random alpha/numerical text. 

       5. Right-click on the xxxxxxxx.default-release folder and select Copy.

       6.  Paste a copy of xxxxxxxx.default-release to your transfer device. Remove it safely from the source computer when done. 

       7. Uncheck the “Show Hidden Files” tab that you checked in step 2.

Note: a) These steps can also be used to create a backup of your Thunderbird profile folder.

         b) In step 4, you may not find a default-release folder. You may see a xxxxxxxx.default or  
             both. Choose the one that is active.

On your DESTINATION computer [Linux Mint Cinnamon 20.3]

       1. Open thunderbird and then close it. A new profile will be created yyyyyyyy.default-release, or .yyyyyyyy.default.

       2. Locate and open the backed-up profile folder, xxxxxxxx.default-release.

       3. Select all of the folder contents and choose Copy. 

       4. Locate and open the new profile folder,  yyyyyyyy.default-release.

       5. Paste the contents of the backed up profile folder into the new profile folder. Choose to overwrite existing files of the same name. 

       6. Start Thunderbird.

When Thunderbird downloads my email it attaches some strange dates. this is my 3 day trying to figure out why. I have uninstalled and reinstalled with the same results. There are 16 eamils currently in my inbox all with different dates. The dates are in attached image. The only correct date in the one dated 05/03/2022.

I have TB set up for my gmail account and everything is working fine. However I have a folder on my HDD containing old e-mails and mail folders (these are files with an SBD or MSF extension or no extension) and I would like to be able to access these old-mails from my current TB setup/profile (or, if necessary, from a new profile - but in that case I would need some guidance as to how to set up that profile because I would not have an e-mail address I could use for the purpose). I have tried Local Folders~Settings and pointing Local Directory to the e-mail folder on my HDD but that doesn't work. Any help will be much appreciated.

HELP! I've used Thunderbird since inception and love it. My dilemma. As of this morning, it was asking for a password? Strange. Of course I had no idea what it was, but through the help of this forum it showed me how to find it. I typed it in and it will not accept it. Through the help of this forum again, I found out how to simply change it which I did all to no avail. Still won't accept it. Grrrrrr!

So here I sit with important emails to send out and receive and unable to get anywhere. I even tried, "forgot password," but because I can't receive emails due to password request, I cannot get the link to proceed in that direction.

What now? I'm crossing my fingers and toes someone can help. I still don't understand why it would all of sudden ask for a password. My internet provider is Spectrum (previously Time Warner). I tried calling them to see what gives and of course they said they can't help.

Most of my emails suddenly got erased from the server (I checked in cpanel). Thankfully i took backup few days back, and thunderbird still has them saved offline (Not POP3, its still IMAP configured). I recovered most of emails but those are visible only on my system. How can i put back those emails back into server, so it can be accessed from other devices as well?

I am having difficult connecting to mailboxes in Plesk Obsidian on a VPS. I can set up the mailboxes in Plesk and make a note of the password. I then go into TB and start the 'Add Mail Account' process. All goes well at first. I get a green message saying 'Configuration found by trying common server names' (automatic connection). When I click 'Done' TB whirrs for a bit and then comes back with a green message showing a tick and 'Checking Password' but an orange message saying 'Unable to log in at server. Probably wrong configuration, username or password'. If I try manual configuration I get a similar sequence (using ports 995 and 465, SSL/TLS and 'Normal password').

I do not have this problem when working with cPanel (on a different server, but very similar mailboxes and security settings). This suggests to me that there's something amiss in my Plesk settings, but what could it be?

I have searched around without success. Most articles that might help are for TB 31 (even the Plesk Obsidian on-line manual). Any suggestions, please?

When I reply to an e-mail using Thunderbird, quoted text appears (in Thunderbird) with a quote bar on the left as expected.

However, when the recipient gets the message in Outlook or GMail, the quote bars are missing. In GMail quoted text is indented and a slightly different color (though it's hard to see the difference). In Outlook the quoted text is just indented.

How do I get Thunderbird to include quote bars for quoted text in the sent message?

If I format the message (with quote bars) using markdown in a browser, and then cut/paste the formatted message into Thunderbird, then it appears as expected to recipients using Outlook and GMail. But that's a painful way to compose replies to Outlook and GMail users (IOW everybody I reply to).

In the email client I have just come from the Unread folder contains all unread messages irrespective of the folder they might be in. The Unread filter in Thunderbird appears to relate only to the highlighted folder. I have many folders, the list being long not all are visible on the 'home' view. This means that messages in folders far down the list are only visible if I scroll down looking for them. Is there a way to modify the Unread filter to ensure that all folders are searched for unread messages and displayed together? I am using TB 91.8.1.

I have recently moved from Outlook to Thunderbird as Outlook developed a problem communicating with my Virgin Media email accounts. I am slowly finding my way around Thunderbird, but am experiencing a problem with some of my sub folders. This only applies to Virgin Media accounts.

I have looked at previous questions on a similar topic and have tried the simpler solutions (the ones applying to advanced users are Greek to me)! Unfortunately, they haven't solved my problem.

If I go to account settings and uncheck the "show only subscribed folders" box, the greyed out sub folder disappear. However, right-clicking on the folder heading and selecting subscribe and attempting to subscribe to the folders there, doesn't work.

Is there a simple process I can go through to access these sub folders?

I cannot sent email to one specific recipient. I have two accounts, one through gmail and one through AT&T. When I try and sent an email to this one recipient from either account, the File/Send Now function is grayed out. Ctrl-Enter does not work either. This is the only recipient I cannot send mail to. I've sent test email to several other recipients with no problem. Obviously, I'm not getting any kind of 'email blocked' type of message, since nothing is being sent out.

My Thunderbird version is 91.9.0 (32-bit)

Any ideas why this is happening?

TIA for any help.

I am trying to add a new gmail account to Thunderbird but when I enter my address and password, a pop up appears in which I need to enter mail address at google. I do this, but it seems to just re-prompt me.

I have attached images of the steps taken to try to add the gmail account:

tb1.png: I enter name, address, password. tb2.png: TB validates this and adds some server info. tb3.png: a popup opens and my address is pre entered. I click the blue button. tb4.png: I am reprompted for my email address. I can enter my address again and again and click blue button but I am re prompted every time. Seems impossible to proceed from here.

If I can open this pop URL in a proper browser to inspect what is going wrong, I could probably fix this issue. However, TB will not let me copy the URL from the address bar which is frankly user hostile behavior :(

I have tried doing this on several different internet connections as well as tried disabling pihole, etc. So that does not seem to be the cause.

Recently, and not for the first time, Thunderbird sent an automatic reply which thankfully bounced. However I couldn't find the offending email when searching for this address. Using a third party tool, namely Agent Ransack aka FileLocator Lite, I found the folder and hence the email.

How can I do this within Thunderbird. I can only select To, From, Cc and/or Bcc. Not Reply-To.

Can anyone let me know if this is possible, if so how?

I need windows 7 system, it supports older version software. Wife complains she need to set "landscape" for winword for each print. This is not required when using windows 10. Microsoft office is installed on both systems.

I have read all the "solutions" to the above issue however the "solution" popups do not appear on my screen. For example, from the address, I can select multiple addresses in which to send emails. However when I select "Write", it puts them automatically into the "To" box. I want them in the "Bcc" box. I see where you can move them from the To to the Bcc but it won't let you select ALL of them, you have to move each one, one at a time.... ARRGGG. Why can't this simple issue be resolved? This was no problem with Windows Live Mail. One "solution" says I can select the contacts from my "address side bar" next to the email..... I have NO sidebar.