Thunderbird Forum podrške

Received an encrypted message but the content appears to be only my public key. Message not visible. Copy of same message was displayed in the clear in gmail on a computer that not set up to encrypt. Any suggestions gratefully received.

this interface uses pop3

When emails are pulled, I can see that it pulls, let's say, 50 messages, the notification shows 25 new messages but the inbox only shows 10. I have looked everywhere for the "missing messages" but don't see them anywhere. I have also had some people tell me that they sent an email response (so they were not entering the email address) and I don't see it.

What could cause these differences?

My work schedule revolves around the first Thursday of the month. Creating events recurring on the first Thursday or Friday is not a problem of course.

However, I am trying to set up recurring events /relative/ to the first Thursday, e.g. for the Monday of that week.

Can this be done in Thunderbird Calendar? Happy to do some manual editing of calendar files if that would help.

Thank you!

Hello,

Please check the attached picture. My "Blogs & News Feeds" contains an empty "All jobs upwork.com" folder and I can't figure out how to remove it.

I have moved Thunderbird from the new Microsoft Outlook and I am very happy with Thunderbird except for one thing.When sending an email I often get the error message:

"your message was sent but a copy was not placed in your sent folder (Sent) due to network or file access errors. You can retry or save the message locally to Local Folders/Sent-jemsym@aussiebb.com.au."

How can I correct this? I have checked the outgoing SMTP details and have changed a couple of things with AussieBroadband. the problem remains. Can you help?

First post. I was trying to target a Thunderbird forum but I get vectored to Mozilla which seems to be more focused on Firefox. Sorry if I'm in the wrong place.

First, it was my impression that a global Inbox could be POP accts only. But my global Inbox has a POP acct and an IMAP account. I'm not sure but this might have happened when I converted one of my POP accts to IMAP. Am I wrong about this theory? Going forward, I'm going to refer to this IMAP acct as the "bad" one.

As a result, my bad IMAP acct that appears in the global Inbox has no Inbox of its own under its account. What I'm looking to do is get the bad IMAP Inbox out of the global Inbox and back into its account in my sidebar.

There's nothing wrong with my e-mail but I want to keep it that way. I have another IMAP account (aka "good") and as a result of my situation, I have to look at the bad Inbox and the good Inbox of the two IMAP accounts in different ways in the interface and it annoys me.

I've looked at the account settings. The good IMAP acct has the personal namespace "INBOX." whereas the bad IMAP acct has the personal namespace "". I've tried changing the bad personal namespace to "INBOX." as well but I also have "allow server to override these namespaces" and it won't stick. I don't understand IMAP well enough to be confident about making more changes without getting advice.

Hope this isn't too confusing.

Please assist,I have 4 Email address with Thunderbird & regardsless of which email I use ti send a reply,it comes up with out going server SMTP error this all happened when I added a 4th Email address Thank you Darryl

Have several folders and sub-folders for saving important emails in Thunderbird. One choice for saving subfolders. my master email address. I can save to this folder but cannot retrieve those emails. Attached is a screen shot. How do I retrieve emails from those folders???

i tag all the mails in my inbox with colours. Some of these colour tags were ones I customised with my own descriptions and names. All the colour tags have today disappeared except for the red/important ones... and the red/important tags were one of the default TB tags. All the custom tagged emails now display as untagged. Help, anyone? I've got 400 untagged emails and it's actually a very important sorting device for me.

I’m running Supernova 115.11.0 (32-bit) on a Windows 7 desktop (64-bit), and – from the beginning – it has been freezing at least once every 24 hours. The only way to “unfreeze” it is to use Task Manager to close Thunderbird, and then reboot it. No troubleshooting reports are ever shown.

Is this a wide-spread issue, that may be addressed in updates?

I am running 4 email addresses (3 hotmail.com and 1 live.com) on TB 102.15.1 (64 bit) - Windows 10. About a month ago I upgraded TB was unable to send anything no matter what Server settings I used - tried every combination - so I downgraded back to Version 102 and everything went back to normal. About a week ago, one of my hotmail accounts started giving me a "fail to log in" message. The other accounts work fine. The "fail to log in" will go from 2 or 3 times to 15 to 20 times in about an hour or so but every time, sooner or later will work and then it will be fine for a few hours and then start again. I have had these accounts running on TB for well over 10 years with no problem and I have not changed anything in the Server settings or anywhere else. The account I am having the issue with has been running on TB since TB started with no problems until now. I assume that TB may be having some issues with the Outlook platform but I have not changed anything there either and I have no problem logging into hotmail.com directly. I have spent many hours combing the internet for hints to no avail - everything I have tried has either had no effect or screwed things up so I had to back track to where I started. Any ideas???

For some time now TB has been opening with a blank screen. I've located web advice which reads in part "Usually if you go to "Tools - Account Settings etc, TB will start in the Inbox folder" but that doesn't help because those are already my settings. I'm convinced that I have changed something because TB always used to open in the Inbox folder. Solution would be appreciated.

My Thunderbird Inbox is set up to order the emails so the oldest emails are at the top of the list, and the part of the list that is showing in the window on the screen is the bottom of the list, therefore the most recent emails. However, when I open Thunderbird to look at the emails in the Inbox, while the list is in the order as just specified (oldest at the top, newest at the bottom), what I see on the screen is the section of the list of the emails that arrived about 6 weeks ago. To see the most recent emails I have to move the list up the window. It has been doing this for about 2 months.

Any idea why it is doing this, and how to 'fix' it, please?

Thankyou

I imported info from Thunderbird on other computer. Now every time I open Thunderbird on the new laptop it says it can't reach my email server, incorrect login. If I enter my password it repeats the failure message. If I just close the message, the popup appears again, closing it again, it repeats once more, then closing it keeps it gone. Once I get the message to stop popping up by the repeat closings of the message, the related email account has already collected new emails so it was working. For what it's worth, the laptops are both Lenovo, the old is running Win10, the new Win11. Before the Import is was working fine, I only wanted to transfer my contacts, but the export grabbed everything. I don't have the issue on the original laptop I exported the info from.

I use Thunderbird to pick up 4 separate gmail accounts. Every once in a while I can't delete a message or selected messages. I have tried hitting delete, which normally works, deleting within the message and CTRL delete. The odd thing is if I go to another mailbox, delete a message from there, then return to the mailbox that didn't delete, I can suddenly delete messages from the first mailbox. This happens on all the mailboxes. Obviously, I can work around it, but it is annoying. Any suggestions? I previously deleted all the Trash and Trash.msf files and that did not fix the issue. This seems to have started with version 115. I am on a Mac IOS Sonoma 14.4.1

I have an email conversation that's gone back and forth many times, with the other party including useful links for me. I noticed today that links are only live (blue, clickable) in the most recent email, if I scroll down to past emails in the chain, all links are plain text and not clickable. How can I make them all clickable please?

I have set up PGP with the following guide: https://support.mozilla.org/en-US/kb/openpgp-thunderbird-howto-and-faq#thunderbird:linux:tb115

Under test set up it says I only have to ensure that the from: email is correct.

But what if I use a different reply-to email address?

for example:

• Person A has a PGP is set up for PrsA@example.com, they also publish their public key in https://keys.openpgp.org/, Their reply-to email is PersonA-lastname@example.com
• Person A sends email with PGP public key attached to Person B. Person A already has Person B's public key.
• Person B receives the public key and saves the cert in relation to PersonA-lastname@example.com just to be sure they go to https://keys.openpgp.org/ to check but it is not there.
• Person B sends an encrypted email to their only known address (personA-lastname@example.com) with the encryption public key provided.
• Would Person A be able to receive the email?

tests I have done:

• I tried this with edward-en@fsf.org and I get an email back saying: Diagnostic-Code: smtp; 550 Edward needs reply-to or from to be the same as envelope from
• I tried this to myself and I am able to read the email.