Can not seperate email accounts

I have had to Restore my laptop. Since I have I can not seem to separate my email accounts. I wish them to be kept separate because I use different 'Signatures' for each … (pročitajte više)

I have had to Restore my laptop. Since I have I can not seem to separate my email accounts. I wish them to be kept separate because I use different 'Signatures' for each account. Is there a way to separate the accounts in Thunderbird? If not How do I delete all the email accounts connected to the main email account, without affecting any email accounts outside of Thunderbird so that I can then add them individually?

Asked by Steve prije 4 sati

Last reply by Steve prije 34 minuta

yellow blocking at the bottom of emails and drafts

why am i getting blocking yellow bar at the bottom of some emails and drafts. I want to know how to remove them and do not wan encryption either please help. i w… (pročitajte više)

why am i getting blocking yellow bar at the bottom of some emails and drafts. I want to know how to remove them and do not wan encryption either please help. i want the yellow bars at the bottom of the page removed thank you

Asked by Mary prije 1 sat

Sort view (of all folders) by 'unthreaded' as default by Settings

I want to set unthreaded as default column view for all folders, and then that column view to be used on all new subfolders I create, but without having to use advanced s… (pročitajte više)

I want to set unthreaded as default column view for all folders, and then that column view to be used on all new subfolders I create, but without having to use advanced settings various workarounds (it is and should be called for what it is...) which is currently the standard response when users is asking how to change from threaded to unthreaded column view. Why can't this setting be simply implemented as part of the standard gui?

Asked by kim51 prije 6 dana

Last reply by david prije 2 sati

Way to customize <head> section of outbound email?

is there a way to include or insert custom code into the head section of outbound Thunderbird emails? Note that I am not talking about custom email headers, but custom h… (pročitajte više)

is there a way to include or insert custom code into the head section of outbound Thunderbird emails?

Note that I am not talking about custom email headers, but custom html into the <head> section of outbound HTML emails.

Thanks!

Asked by stevenstromer prije 1 dan

Last reply by Toad-Hall prije 3 sati

Setting Up Thunderbird

I've been a Firefox fan for years. I thought I'd try Thunderbird. I'm in need of some help please as I'm going round in circles. I am trying to link my btinternet email … (pročitajte više)

I've been a Firefox fan for years. I thought I'd try Thunderbird. I'm in need of some help please as I'm going round in circles.

I am trying to link my btinternet email account to Thunderbird. Thunderbird cannot do it automatically so I have to enter the details manually.

I have all the right settings according to BT: Incoming POP 995, SSL enabled but not StartTLS. Outgoing Port 465, SSL enabled not StartTLS. mail.btinternet.com is used.

The User Name and Password are correct but Thunderbird cannot connect to the account. There are no Firewall issues.

Something is happening because BT have notified me of potential unauthorised access and I have to reset my BT password. Even when I enter the new BT Password Thunderbird cannot link to the account.

Any suggestions as to what might be causing the problem? Thanks.

Asked by m.lindley prije 1 dan

Last reply by m.lindley prije 3 sati

Thunderbird Stopped Working, and Password Change

Hello, All I need major help, please. I am getting the attached messages when trying to send an email. Thunderbird worked perfectly yesterday morning, but then would n… (pročitajte više)

Hello, All

I need major help, please.

I am getting the attached messages when trying to send an email. Thunderbird worked perfectly yesterday morning, but then would not send any emails. I get emails, but cannot send from my 2 accounts.

I am on the latest version of Thunderbird, Supernova 115.10.1

Also, I cannot find out where to change my password for the accounts, because at times I need to fill in a password. I can't find it.

Thanks in advance for any help.

Best, Leslie

Asked by Leslie W prije 4 dana

Last reply by Leslie W prije 4 sati

  • Riješeno

Forwarding emails

If I Forward and email with a list of cc: addresses, will the Forwarded emails be sent to the cc: addresses also or do I need to enter a new list of cc: addresses? … (pročitajte više)

If I Forward and email with a list of cc: addresses, will the Forwarded emails be sent to the cc: addresses also or do I need to enter a new list of cc: addresses?

Asked by egand prije 4 sati

Answered by david prije 4 sati

  • Arhivirano

UI suggestion: Prevent Thunderbird from executing multiple commands at once

Dear Thunderbird team, yesterday I had a somewhat scary moment: I issued the "Archive" command by pressing "A" to archive all my mails from the Inbox, which took about 1… (pročitajte više)

Dear Thunderbird team,

yesterday I had a somewhat scary moment: I issued the "Archive" command by pressing "A" to archive all my mails from the Inbox, which took about 1-2 minutes. So far, so good. During this process, I changed the sound volume of my Mac using the keyboard buttons, which are right above the Backspace key. So I wasn't precise enough and hit the Backspace key while Thunderbird was archiving. That was a bad idea, because Thunderbird then started to delete all selected messages at the same time as it was archiving them! I was able to recover some e-mail from the Trash afterwards.

So I'd suggest that Thunderbird only allow one command to be executed at a time, lest they interfere with each other. Otherwise, I love Thunderbird.

Thanks for looking into this, regards,

Arthur

Asked by anacond23 prije 11 mjeseci

Last reply by Wayne Mery prije 5 sati

  • Riješeno

Setting up Gmail or Yahoo mail, selected with OAuth2, but cannot see the authentication window pop up.

I am struggling with Gmail and Yahoo mail account in TB these few days. I hit almost the same errors from both. I generated app password for Yahoo mail, and put it in whe… (pročitajte više)

I am struggling with Gmail and Yahoo mail account in TB these few days. I hit almost the same errors from both. I generated app password for Yahoo mail, and put it in when setting up new account. For connection security: SSL/TLS For authentication method: tried with Normal password, Encrypted password, and OAuth2 However, I am seeing the expected authentication window pop up when trying the OAuth2. For all three authentication method: errors are always the same --- unable to connect to your IMAP server. I've followed another instruction to change maximum number of server connections to cache into 1 or 10. Error messages were the same imap one. So, what should I do/try for next?

Asked by Kin Zhang prije 6 dana

Answered by Kin Zhang prije 5 sati

TB often slow for all operations

I have been struggling with slowness in Thunderbird in recent months (Windows 11, mid-range Lenovo laptop). There is often a distinct lag during even the smallest operati… (pročitajte više)

I have been struggling with slowness in Thunderbird in recent months (Windows 11, mid-range Lenovo laptop). There is often a distinct lag during even the smallest operations.

Examples are: selecting an email, closing a tab, typing, calendar events editing.

TB process in Windows usually uses 1000MB RAM. RAM is around 60-70% usage usually. I never have the same slowness issues with other applications.

I tried quite a bit: safe mode testing, removing extensions, compacting folders and more tips. I ended up removing Thunderbird and my profile entirely, and reinstalled the latest version with an empty profile. I just set up my Gmail and other email account. No extensions installed, yet still the same issue.

Could it be that something is still there from a previous install, if I removed my profile?

I've been using Thunderbird in Linux and Windows for years with moderate issues that I was able to resolve, but am now really puzzled. Please help.

Asked by Saho prije 1 dan

Last reply by christ1 prije 5 sati

  • Arhivirano

Unarchive messages

By mistake I had archived some messages. How do I unarchive them?? I only have seen instructions on where they are archived, but none on how to unarchive. Very annoying t… (pročitajte više)

By mistake I had archived some messages. How do I unarchive them?? I only have seen instructions on where they are archived, but none on how to unarchive. Very annoying that. Tks.

Asked by johnb.acad prije 1 godina

Last reply by Wayne Mery prije 5 sati

Google calendar not syncing to Thunderbird Lightning

Computer crashed. After restoring, Google calendar is not syncing. No error message that I can see. I unsubscribed and resubscribed to no avail. I have no clue what to lo… (pročitajte više)

Computer crashed. After restoring, Google calendar is not syncing. No error message that I can see. I unsubscribed and resubscribed to no avail. I have no clue what to look for and searching here is not helping as all the references to this are years old. Can someone help me figure out why this is happening?

Asked by pmruzicka prije 6 sati

  • Riješeno

Is there any way to pick which account is sending an email based on the current mailbox or the addressees?

I've recently switched from Apple Mail to Thunderbird, and I'm realizing that one of the convenient little features that Apple Mail had that is missing in Thunderbird is … (pročitajte više)

I've recently switched from Apple Mail to Thunderbird, and I'm realizing that one of the convenient little features that Apple Mail had that is missing in Thunderbird is that it would intelligently select which email account you are sending an email from depending on the currently viewed mailbox or who you've addressed it to.

For example, let's say I have two email accounts: a personal Gmail address, and a work account with an address that looks something like myname@company.com, with the Gmail account being the default.

If I start writing an email from my Gmail inbox or am addressing it to people whose addresses are totally unrelated from my work account, I'd like it to use the Gmail account, which is what it does.

However, if I'm currently browsing one of the mailboxes for my work account, or I address a new email to one of my coworkers who also has an @company.com email address, I'd like it to automatically set the 'from' address of my new email to my work email.

Thunderbird already picks the correct account when I'm replying. I'm hoping that it can also do so when starting a new email.

Is there any way to do this?

Asked by brian79 prije 22 sati

Answered by david prije 11 sati

How to delete dual inbox's

I had to delete and add back several accounts due to a change in servers (cox.net to yahoo.com). Prior to this I just had the All Folders, Local Folders and below. Now I … (pročitajte više)

I had to delete and add back several accounts due to a change in servers (cox.net to yahoo.com). Prior to this I just had the All Folders, Local Folders and below. Now I have the Unified Folders and below, which are essentially a duplicate of the folders in the old All Folders. (See attached image) Not only is it making things confusing but I'm storing duplicate emails and it seems to be affecting performance, Thunderbird now randomly quits and restarts. So, how do I delete either the All Folders or the Unified Folders and move the few sub folders that are unduplicated into the remaining group?

Asked by Bisha prije 1 dan

Last reply by david prije 7 sati

How can I pick the default 'from' address when starting a new email while browsing a saved search?

Normally when you starting to write a new email, Thunderbird will set the 'from' address to the address of the account whose mailbox you're current browsing. However, I … (pročitajte više)

Normally when you starting to write a new email, Thunderbird will set the 'from' address to the address of the account whose mailbox you're current browsing.

However, I have a saved search that entirely contains email from my secondary (work) account, but if I start a new email while browsing it, it picks my default (home) email address. This has caused me to accidentally send emails from the wrong address more than once!

Is there any way to change it so that it'll set the 'from' field of new emails to my work email when browsing that specific saved search?

Asked by brian79 prije 7 sati

How to Roll Back Update by One or a Few Versions?

I updated to 115.10.1 a few days ago and would like to roll back to what I had before. Is there a way to do that? And is there a file that has the version number in it?… (pročitajte više)

I updated to 115.10.1 a few days ago and would like to roll back to what I had before.

Is there a way to do that?

And is there a file that has the version number in it? I would like to look in a system backup to find out the version number that I had last week.

Asked by Toolworker prije 7 sati

Last reply by david prije 7 sati

"Sent mail" grayed out and messages sent are not saved

I have 6 accounts on cox.net and today in two out of the 6 accounts, emails that I send are not saved and I get a message "Your message was sent but a copy was not placed… (pročitajte više)

I have 6 accounts on cox.net and today in two out of the 6 accounts, emails that I send are not saved and I get a message "Your message was sent but a copy was not placed in your sent folder (Sent) due to network or file access errors. The "sent" folders for these two accounts are grayed out. I have verified that the account settings have the right folder as the destination for the sent emails and have checked that all emails should be saved. I also get a message in Thundebird -The current command did not succeed. The mail server for account xxxxx responded [TRYCREATE} Mailbox doesn't exist. Mail goes out but no copy is saved. Only two out of 6 accounts are affected and I didn't do anything to them before this started happening.

Asked by duhnel prije 1 dan

Last reply by Toad-Hall prije 9 sati

How can I directly open file links?

In our company, we have recently updated Thunderbird from version 52.3.0 to 115.9.0. Now we have a problem with href links containing file URIs in our messages. We often … (pročitajte više)

In our company, we have recently updated Thunderbird from version 52.3.0 to 115.9.0. Now we have a problem with href links containing file URIs in our messages. We often receive file links pointing to files in our local intranet, which look like this: <a href="file://///intranet.local/dfs/output/movie.mp4" class="moz-txt-link-freetext" moz-do-not-send="true">movie.mp4</a> Up to Thunterbird version 98.0b3 it was possible to open these files by simply clicking the link. But since version 99.0b1 file links don't open any more. Instead, the error console displays the following message: Security Error: Content at mailbox:///C:/Users/username/AppData/Roaming/Thunderbird/Profiles/profilename/Mail/Local%20Folders/Inbox?number=12345 may not load or link to file://///intranet.local/dfs/output/movie.mp4. Fortunately, it is possible to open the link with "Open Link In Browser" from the context menu. But we would like to get rid of this extra click. I already followed the steps in this document: http://kb.mozillazine.org/Links_to_local_pages_do_not_work#Firefox_1.5.2C_Mozilla_1.8.2C_and_newer Interestingly, this document is older than the time, when our problem was introduced into Thunderbird. Consequently, when I follow these steps, file links still don't open in an external application. Instead, they open inside of Thunderbird which is not the desired effect. To put my question in a nutshell: How can I open file links by left-clicking on them, just the way they open, when I right-click on them and select "Open Link In Browser"?

Steps to reproduce: On a Windows computer create a new mail. Press Ctrl-K to insert a link. Enter the following path with username replaced by your windows logon name: file:///C:/Users/username/Documents Save and close the mail. Watch the mail in the drafts folder. Click the link. Nothing happens, but you can see a message in the error console. Right click the link and select "Open Link In Browser". This opens your windows explorer.

Any solution is welcome, even if it's potentially insecure, since our computers don't have any internet access and we can receive internal mail only.

Asked by Clemens prije 1 dan

Last reply by Toad-Hall prije 9 sati