Svi proizvodi Forum podrške

Version 125.2.0, Android 11 Settings: Firefox is default browser. 'Open links in apps' is set to 'Ask before opening'

Scenario:

• With the Swiss payment app 'Twint' I scan a QR-code for a payment
• This will open the embedded browser to show a payment site (sbs.twint.ch)
• After entering the amount and pressing submit, the flow is supposed to return to the Twint-app. However, here it just blocks and I cannot navigate anywhere or return to the app manually

Workaround:

• When the embedded view shows, in its menu, I can select 'Open in Firefox'
• Entering the amount there and pressing submit, the popup shows, asking me whether 'to open the link in app'. When I confirm, I am redirected back to the app and can confirm the payment there.

I suspect, the webview does not show the popup but wait for it to be confirmed and thus the flow is blocked. I have searched the forum but could not find anything matching. Still, is that a known issue?

My Thunderbird v. 115.10.1 (32-bit) Been using TB forever w/ GMail accounts Primary E-Mail is missing folders and has duplicate folders, one [Gmail] is inside the Inbox another is outside. Has [Sent] Doesn't appear to contain anything in either Junk and Trash folders. But, they do when I open GMail in my browser. My secondary E-Mail has no [Gmail] folder but does have Sent Mail, All Mail, Junk, Spam, Trash (empty), Trash and 3 that I created. This E-mail seems to function more completely. Is there a "repair install" a file to edit or something else to get me back to 100% operational? Can send folder properties if helpful. Image attached.

Comcast/Xfinity is binning email sent from Thunderbird to yahoo, gmail or hotmail

This problem started on April 24.

I have compared the Mozilla info at the front of emails sent to my wife before and after April 24. The only differences other than Subject and content are:

    From - Mon, 22 Apr 2024 16:34:28 GMT
    From - Sat, 27 Apr 2024 08:10:47 GMT

    Message-ID: <c43e9437-1603-41fe-bc73-699c2ac4ddb0@acm.org>
    Message-ID: <ce6cfda0-24b8-4503-9838-2d16fe8fbe94@acm.org>

    Date: Mon, 22 Apr 2024 09:34:26 -0700
    Date: Sat, 27 Apr 2024 01:10:45 -0700

- The Message-IDs are identified as @acm.org - My sending address with Thunderbird is @acm.org - My ISP for Thunderbird is @comcast.net - If I send from xfinity.com which is comcast, the emails succeed - If I send from Thunderbird, the emails fail as follows

Emails to yahoo get:

Diagnostic-Code: smtp; 554 5.7.9 Message not accepted for policy reasons. See https://senders.yahooinc.com/error-codes

Emails to gmail get:

Diagnostic-Code: smtp; 550-5.7.26 Unauthenticated email from acm.org is not accepted due to domain's

Emails to hotmail get:

Diagnostic-Code: smtp; 550 5.7.509 Access denied, sending domain [ACM.ORG] does not pass DMARC verification and has a DMARC policy of reject. [PU4P216MB1581.KORP216.PROD.OUTLOOK.COM 2024-04-28T07:03:54.765Z 08DC66942A10A029] [AS9PR06CA0096.eurprd06.prod.outlook.com 2024-04- 28T07:03:54.886Z 08DC65C282FFA777] [AMS0EPF000001B7.eurprd05.prod.outlook.com 2024-04-28T07:03:54.887Z 08DC66AF862E5B46]

Every time I open Firefox another blank window opens behind the main Firefox pages . I see it when I close Firefox so have to close that too. There is no URL in the window just a blank page.

Been using Thunderbird for 5 or 6 years now and am a big fan. However, in the last few versions, the tool seems to be more and more resistant to actually checking for mail when told to do so.

It frequently does not check at startup ("Check for new messages at startup" is checked for all accounts), and also does not check when "Get all new messages" is selected.

I have tested this with known mail waiting to be retrieved and Thunderbird does not do it when directed. It did eventually do it, and downloaded the mail, but I am not sure why the reluctance to check on demand by the user.

It is possible it may just not be REPORTING that it is checking, but failing to get mail I know was there kind of makes that less likely.

The earlier versions, from 5 years ago, worked very well in this regard... always checked on startup and when told to, always reported the activity in real time as the check proceeded. The newer versions are not good at this. Or it is user error, which is definitely possible, but I'm not sure what I might be doing wrong.

Currently using Thunderbird V115.10.1 64 bit, running on Linux Mint MATE. This is the newest version available as of Apr 29, 2024, and the problem seems to be worse in this one than in the previous version. Not positive on that, but I did have a dickens of a time getting mail downloaded that I knew was there.

Any input or ideas will be most appreciated, thank you in advance.

Can't print emails or any saved Thunderbird files. I click on FILE>PRINT and get the print preview, butwhen I click on "PRINT" I get a "printer offline message". I can print from Microsoft Word or PDF files and any other program. It appears that everything worked well until the latest Windows update was installed.

I am using an HP printer and print via HP's Smart Print software which I believe is the default. I'm not sure if this is a Thunderbird issue or another screw up by Microsoft.

Thanks for your assistance.

I am the beneficiary (or victim, depending on how you view it) of Cox Communications turning all email services over to Yahoo. Both Cox & Yahoo store messages on an IMAP server.

As seems to be Yahoo's custom, they provided minimal documentation. Last night, in a 3+ hr call to tech support, for example, I noticed that my inbox had exactly 10,000 messages. (I know. It's not Inbox Zero -- I'm a bad, bad boy.) This seems suspicious, so I asked Yahoo's tech support agent about it. At first they said Yahoo puts no limits on messages and blamed Thunderbird for this. Then I showed them my employer's Gmail inbox with 35K messages and said this proves it's not Thunderbird. Then the agent said Yahoo has no limit. Then, apparently after getting feedback from their "support team," they said there's a limit of 10,000 messages per folder. So, even Yahoo's tech "support" seems almost clueless about such undocumented "features."

I know I need to trim the inbox, but I also need to keep lots of messages currently in it. So, the first thing I have to do is to move a large number of messages from the Inbox to another folder whose contents will be fixed.

To do this, I first created a folder to keep the original messages, "Cox Inbox."

Then I created a message filter with the following logic:

• Match all of the following: Date, is before, 4/7/24 (the day before Cox migrated my account)
• Move message to, Cox Inbox

But despite trying this repeatedly (I also tried "Match any of the following"), most messages stay in the Inbox and relatively few make it to the "Cox Inbox." I don't know how to troubleshoot this. Can you help?

Not being able to get the filter to work, I tried brute force. In my Inbox, I highlighted all the messages I wanted to move, pressed CMD-C (I'm using a Mac), went to the Cox Inbox, and pressed CMD-V. But it seemed nothing happened. Again, I'm at a loss as to how to troubleshoot this. Please help.

Since this morning 99% of my tasks disappeared. When trying to reset the lost tasks I remember by converting emails to task or by entering them as new tasks from the taskbar, they do not save and do not show up.

I restarted thunderbird a few times. Whilst doing that there was an update. I think windows. Thunderbird tasks still not working. Checked updates and Thunderbird is up to date.

Converting emails to tasks is extremely important to me.

Scenario: I have two E-Mails configured in thunderbird. For simplicity, let's assume they are: `alice@gmail.com` and `bob@cock.li` .

I have configured both via SMTP, and they are *totally different* SMTP servers (Gmail vs. cock.li)

If I compose a message from "alice@gmail.com" to "bob@cock.li", then when I reply from Bob's inbox in Thunderbird, everything is OK.

However, if I compose a message from "alice@gmail.com" to "bob.extra@cock.li", using the `.` alias feature of cock.li, then although Bob gets the message in his inbox, clicking "Reply" will actually set "From" as "alice@gmail.com" and "To" as "bob.extra@cock.li" !

To be very clear: this happens when clicking reply in Bob's inbox in Thunderbird.

I think this is a Thunderbird issue because:

• It happens even if I compose the E-Mail from Alice's webmail (i.e. Browser) (Note: Alice still exists in Thunderbird)
• It DOES NOT happen if Alice DOES NOT exist in Thunderbird
• It DOES NOT happen if I try and reply as Bob via cock.li's webmail (i.e. Browser)

My guess is somehow when Thunderbird sees both Alice and Bob as valid accounts in Thunderbird, but the recipient was an aliased version of Bob, it somehow gets confused.

Here are example received headers for an actual demo I tried. (poiasd@saxrag.com is main E-Mail, abuse@saxrag.com is an alias. poiasdpoiasd@cock.li is the sender)

``` Return-Path: <poiasdpoiasd@cock.li> Delivered-To: poiasd@saxrag.com Received: from mail.saxrag.com by vps-2395d3b9.vps.ovh.net with LMTP id Ujt4LrxzMGbCCBAA3wKhXw (envelope-from <poiasdpoiasd@cock.li>) for <poiasd@saxrag.com>; Tue, 30 Apr 2024 04:29:48 +0000 Authentication-Results: mail.saxrag.com; dkim=permerror header.d=cock.li header.i=@cock.li header.a=rsa-sha1 header.s=mail header.b=JEr8eBKM; dkim-atps=neutral Received: from mail.cock.li (mail.cock.li [37.120.193.123]) by mail.saxrag.com (Postfix) with ESMTPS id A0E8C43C03 for <abuse@saxrag.com>; Tue, 30 Apr 2024 04:29:48 +0000 (UTC) MIME-Version: 1.0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=cock.li; s=mail; t=1714454824; bh=srzi4nIgmpT6bW/cD6Um2I0qdwT33DsnyzueIPNTpP0=; h=Date:From:To:Subject:From; b=JEr8eBKMA14h1Cxa9V/VRXI4HW9N2jgxJRoLqt7JGONFuPPGOeOH8RYV3+OjkpnIw d/gN5oVnmP0UvUrDkslxvmypeG8qt5NHSSQ2wk5I65iqx+soYPJ8imYYBTu4b1VhHk kTQErXT23hsZwLHoXSHlpnBQYpuuY7uHZXYacEAxVjzZ46ICNc1xDX/iAaA/DIF79h iwZMJT1+Gs3+jh7mnbU+fp0vJA+eafp8z+OXELLEMTWBtkp1imXKjig5X/k3DXAG7a jqeff2obhLKPV39BtxbaXIxVsRmECwSZ7/O2fhqRC9FIFVepH5FQpZFXG5hqJ07WCa GhumeUysmhJxw== Content-Type: text/plain; charset=US-ASCII;

format=flowed

Content-Transfer-Encoding: 7bit Date: Tue, 30 Apr 2024 13:27:03 +0800 From: poiasdpoiasd@cock.li To: abuse@saxrag.com Subject: Sending from WebMail User-Agent: Roundcube Webmail/1.4.15 Message-ID: <07a14e0d75a83f779ade6de65c42db83@cock.li> X-Sender: poiasdpoiasd@cock.li ```

Is there a way to search ALL emails for everything received in the last 1 day, last 3 days etc, whether or not the folder is subscribed?

I just had a big problem finding particular new emails. The reason was that that somehow the folder had got unsubscribed. This shocked me because I hadn't even realised I needed to subscribe to folders to search them.

In a practical sense the problem is therefore fully solved and all I need to do is to make sure I'm subscribed to everything. But I find it disturbing that anything could undermine the very simple search of what emails I received today. So I'd like to understand if there is indeed any way to see all of today's emails without any exception.

The search I was using was "Age in days in less than 2" and I was doing this both with "Run search on server" ticked and unticked. The emails are all there on the server, so surely there must be a way to see them in a raw naked state before they are sorted into folders? I guess the global search is able to do just that, but as far as I can see it doesn't seem able to search by any kind of date range (can filter but not search).

I added the Save to Pocket (mini) extension to Firefox 125.0.2 today. When I look at the collection of articles I've saved to Pocket (I've been using Pocket for years) in the browser, I only see 8 articles. But when I open Pocket on my iPhone and iPad, the list of articles I've saved is much more longer (an estimate would be between 50 and 75 articles saved to Pocket). I haven't found any articles in Mozilla support to help me solve this. Thanks

Hello people of Firefox,

I'm attempting to deploy Mozilla to our android devices using MDM but need to be able to use our organization's Certificates.

I know I can manually go into the secret menu and set it to use third party CAs and that works but when deploying to over 500 devices that's not feasible...

Is there any configuration keys I can access to be able to remotely configure the application to use third-party CAs? (These are normally referred to as key-value pair)

Thanks.

Thunderbird 115.10.1 64 bit on windows 11. 24.4.2024.

Question: How I can access shared folders in Thunderbird?

Office 365 business. I can access admin portal etc:

portal.office.com/adminportal

And also I can go to Exchange admin portal via this. So, in my opinion I can use all deep settings also.

Office 365 licenses (full) for name.lastname@company.fi. Portal show "Office 365 business standard".

I create also shared folders. Today shared folders found from "Teams groups". Log in to portal.office.com/adminportal, "Teams-Groups", and then "Shared mailboxes".

My conf: Office 365 business standard found name.lastname@company.fi. ("john.smith@company.fi", "alice.brown@company.fi" as example.)

Shared mailboxes sharebox1, sharebox2, so, it is possible receive email sharebox1@company.fi, sharebox2@company.fi etc. (in real life share box names are bookkeeperteam@company.fi, orders@company.fi, helpdesk@company.fi etc etc.)

CONFIGURATION IS FULLY WORKING. It is, in Outlook it is possible receive and send emails, shared folders with messages are available etc.

------ 

HOW I can add shared folders to Thunderbird? Clean install tested.

1. LIcenced mailboxes work properly in Thunderbird. Tested.

name.lastname@company.fi:

Server: outlook.office365.com, port 993 Username: name.lastname@company.fi Connection security: SSL/TSL Auth: OAuth2

And smtp: smtp.office365.com, 587, starttls, oauth, name.lastname@company.fi.

This configuration work properly, and it is possible receive and send email from Thunderbird.

SHARED FOLDERS

It is not possible add shared folders.

Server: outlook.office365.com, 993 Username: name.lastname@company.fi/sharebox1 (where name.lastname is real working account name, just same as in position 1- working account. Also this sharebox1 work in outlook.) Connection security: SSL/TSL (no difference is it this or stattsl) Auth: OAuth2

(I am sorry, all my systems are native language, so I must translate---)

OK: Now I try use this shared folder. It is visible in Thunderbird. But immediately thunderbird open Browser and ask password: "name.lastname/sharebox1", wrtite password. Now I put same pw as in this account (name.lastname..). "Password wrong." I try empty password. I try account password.

SO: HOW to add shared mailbox in Thunderbird? This information "name.lastname/sharebox" not work. Is it any other method? Or any Exchange setting modification make this?

After updating Thunderbird to 115.5.2 I receive an error when I check (get) messages of my gmail account : 'The STAT command did not succeed. Error getting message number and size......'. However, the messages do come in and so the error turns out false. since the authorization (OAUTH2) credentials are accepted.

I have my server settings check messages from startup; every 5min; automatically download new messages. That works fine. Again only when I goto "Get Messages" the error shows up.

What is wrong here and ho do I fix this? Thank you

This question was asked by someone else in November 2023 but never sign answer. When I click on a link to an address Mozilla should open my Google maps and put that address in automatically. Instead it goes to the Play store to download Google but since I already have it installed I click continue and it opens up Google maps but no address. How do I fix this or is this a glitch in Mozilla?

I have 4 different email accounts, all managed by IONOS. These have all been set up under thunderbird OK. But when I send an email from 1 of these email accounts I always have to enter my password for that a/c. With all the other accounts, this is not necessary. I do not use Thunderbird or Firefox password managers. I assume that I must have made an error in setting up the outgoing details when setting up that particular account in Thunderbird, but I cannot find a way of checking if that is the case.