I-Thunderbird Isithangami Sokwesekwa

I just migrated my email from cox to yahoo servers. The cox.net domain is retained.

I had never seen a "bulk" folder with my other domains and was having problems with emails being sent there.

I deleted the bulk folder and it moved to trash but cannot actually be deleted. I also re created a bulk folder. see pic.

Now emails are still going to the bulk folder that is in trash.

Is there any way to fix this?

Thanks

I am trying to do a mass mailing in Thunderbird to about 2015 libraries, with another one to come. I followed all the instructions carefully and generated all the messages and they went into my outbox, with a "send later" command. Then this morning I entered the command to empty the outbox. I immediately began getting an error message that I could only send 50 messages an hour. Feeling like the sorcerer's apprentice, I closed thunderbird, whcih stopped the bleeding. Now I have 1350 messages in the outbox which thunderbird did not try to send.

Fixing up this mess is going to be complicated, particularly with respect to the messages it did try and fail to send (about 750 of them.) But I could make some real progress if I could figure out how to send 50 of the unset messages at a time from the outbox. I have the first 50 out of the 1350 selected right now, but I can't figure out how to get them sent. HELP! Thanks in advance.

I was subscribed to a large distribution list, but then unsubscribed. But I didn't unsubscribe. So I subscribed again, but was soon unsubscribed again! My email address and password may have been hacked. So I logged into my Comcast ISP and changed my email password. Then I started Thunderbird, and as expected, it asked for my password, and I gave it. My email came up. I tried sending an email and it asked for a sending password. I ignored it, but after a long delay, it refused to send the message. So I tried again, this time giving it my new email password. The sending then worked. I assumed all was now OK.

But, as a final test, I exited Thunderbird, and then restarted. It again came up OK with my emails shown. Then I again tried sending a test message to myself. But it again asked for my sending password! Thinking this might be a scam, I put in a password of "bullshit". Then I received the following popup message:

Sending of the message failed. An error occurred while sending mail. The mail server responded: Polite people say HELO first. Please verify that your email address is correct in your account settings and try again.

What!!! It sure seems like someone (at Thunderbird?) is in the loop grabbing my password before encoding it for storage. A similar thing happened in the past, where I think my account was hacked. So, was this a hacking attempt, and if so, was it from Thunderbird software or my Comcast ISP?

I need to set up several gmail accounts in Thunderbird. The accounts exist; I can see email by going to gmail's webmail for them. I'm running Thunderbird 115.10.1 on Windows 11.

I choose Tools > Account Settings > Add Mail Account then provide the name, email address, password, then TB validates the credentials with gmail's systems. I get a green light message saying that gmail found the entries. I then provide the appropriate POP3 server name and port address and the appropriate SMTP server name and port address and confirm security settings - all of which were verified and carefully edited when entered. TB then sends the information to google and after an very long delay returns a message saying the attempt failed, probably due to incorrect password or settings. All of the information and settings - including the password which was copied and pasted AND the same one used to log in to gmail webmail - are correct.

Obviously, I'm doing something wrong but don't know what. The error message is so generic as to be unhelpful.

Can anyone help me discover the problem?

Hello, since upgrading to 115 Thunderbird has disabled all add-ons, and does not have an option to reenable them. This was done to several extensions which are not marked as incompatible including "NestedQuote Remover" and "Unmangle Outlook Safelinks". Removing and uninstalling them solves nothing. Indeed, the button to install from the market does not work. I had to save to and then install from a local file to test this.

I am not in trouble-shooting mode, but I have found that "Load Temporary Add-on" in debugging works for the current session.

(I tried searching Google and this forum to no avail.... only turning up irrelevant thread about older versions, Firefox etc.)

I have seen numerous posts on this forum involving the "Leave Messages on Server" option in the server portion of the Account settings. Many of these posts include responders stating that this option does not apply to POP servers.

If this is correct, why does Thunderbird even include this setting for an account that is explicitly designated as a POP server/account? This is an invitation to confusion and misunderstanding; I have been a victim of this. It seems to me to be a no-brainer to change the code to remove this option from these POP accounts.

I am unable to copy text and paste from body of email in Thunderbird. I was able to in past versions. When I right click after highlighting text all options appear but does NOT allow to copy anything.

Hi, After using Thunderbird for years without problems, I ran into a serious one now (since a few days). When starting Thunderbird it comes up with three almost empty windows, one over the other. No data is filled in and when clicking on the window it says in the upper left corner: Starting page - Modzilla Thunderbird (no response) / (actually in German) Startseite - Modzilla Thunderbird (Keine Rückmeldung). The small login popup is also seen in the window but doesn't accept any typing and shows also 'Keine Rückmeldung / no response'. I can only stop the process on Windows level. I would be very grateful if you could help me with this issue. I cannot get to my emails anymore. Many thanks Holger

Using Thunderbird on Linux I cannot delete any local folders, when I try to delete them I get more copies of the folders on reopening Thunderbird, after the system says it is "not responding" and I close it down. I have tried several times and now have multiple copies of the local folders I've tried to delete.

Hi, after upgrading the programs to version 115.10.1 after restarting, all folders in the folder panel disappeared. I still have all accounts visible in the account settings. I attach a screenshot.

I follow someone instructions: Menu icon > Help > More Troubleshooting Information Under 'Application Basics' - Profile Folder - click on 'Open Folder' A new window opens showing contents of your 'profile name' folder Exit Thunderbird now - this is important Scroll down - delete all of the following files.

   folderCache.json
   folderTree.json
   session.json
   xulstore.json 

Start Thunderbird With no results. Thank you for any help.

I can no longer move an email from unified to a specific folder without it bouncing back. If move it to a folder it appears there and If I then delete it from unified, it deletes the email in the folder. Only just started happening. What I want is to be able to move the email to a folder, in order to keep the amount of emails in unified to a manageable level.

Sadly I had to thoroughly uninstall Thunderbird, reinstall and create new mailboxes due to some strange reason. In the past, the inbox would show the email list and, if clicked, a message would show up below a separator line. Now only the list shows up and I have to double click to read it which opens a new window. What a pain!

And yes, I know I can view the message page using F8 but it is on the right side and shorten the other windows.

Is there a way to go back to the view option I had in previously?

I send .doc and .pdf files to my customers. When creating the outgoing email message and attach a file, I used to be able to see the file in the preview pane. I can no longer see the preview. Please help. This feature does work for jpg, tiff, and other image files.

Good Day,

For the last few weeks, when using Thunderbird on Windows and writing a draft email, when clicking on the button to create a link, the draft email window freezes. This also happens if I use the menu bar Insert -> Links...

All other Thunderbird windows remain functioning, and I can effectively continue working, but the frozen draft window will remain on screen until closed through Task Manager.

This only happens when creating a Link, not inserting other objects, like an Image. This problem also does not happen with Thunderbird on Ubuntu.

I am running version 115.10.1.

Thanks in advance for any tips that could be of help.

Scenario: I have two E-Mails configured in thunderbird. For simplicity, let's assume they are: `alice@gmail.com` and `bob@cock.li` .

I have configured both via SMTP, and they are *totally different* SMTP servers (Gmail vs. cock.li)

If I compose a message from "alice@gmail.com" to "bob@cock.li", then when I reply from Bob's inbox in Thunderbird, everything is OK.

However, if I compose a message from "alice@gmail.com" to "bob.extra@cock.li", using the `.` alias feature of cock.li, then although Bob gets the message in his inbox, clicking "Reply" will actually set "From" as "alice@gmail.com" and "To" as "bob.extra@cock.li" !

To be very clear: this happens when clicking reply in Bob's inbox in Thunderbird.

I think this is a Thunderbird issue because:

• It happens even if I compose the E-Mail from Alice's webmail (i.e. Browser) (Note: Alice still exists in Thunderbird)
• It DOES NOT happen if Alice DOES NOT exist in Thunderbird
• It DOES NOT happen if I try and reply as Bob via cock.li's webmail (i.e. Browser)

My guess is somehow when Thunderbird sees both Alice and Bob as valid accounts in Thunderbird, but the recipient was an aliased version of Bob, it somehow gets confused.

Here are example received headers for an actual demo I tried. (poiasd@saxrag.com is main E-Mail, abuse@saxrag.com is an alias. poiasdpoiasd@cock.li is the sender)

``` Return-Path: <poiasdpoiasd@cock.li> Delivered-To: poiasd@saxrag.com Received: from mail.saxrag.com by vps-2395d3b9.vps.ovh.net with LMTP id Ujt4LrxzMGbCCBAA3wKhXw (envelope-from <poiasdpoiasd@cock.li>) for <poiasd@saxrag.com>; Tue, 30 Apr 2024 04:29:48 +0000 Authentication-Results: mail.saxrag.com; dkim=permerror header.d=cock.li header.i=@cock.li header.a=rsa-sha1 header.s=mail header.b=JEr8eBKM; dkim-atps=neutral Received: from mail.cock.li (mail.cock.li [37.120.193.123]) by mail.saxrag.com (Postfix) with ESMTPS id A0E8C43C03 for <abuse@saxrag.com>; Tue, 30 Apr 2024 04:29:48 +0000 (UTC) MIME-Version: 1.0 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=cock.li; s=mail; t=1714454824; bh=srzi4nIgmpT6bW/cD6Um2I0qdwT33DsnyzueIPNTpP0=; h=Date:From:To:Subject:From; b=JEr8eBKMA14h1Cxa9V/VRXI4HW9N2jgxJRoLqt7JGONFuPPGOeOH8RYV3+OjkpnIw d/gN5oVnmP0UvUrDkslxvmypeG8qt5NHSSQ2wk5I65iqx+soYPJ8imYYBTu4b1VhHk kTQErXT23hsZwLHoXSHlpnBQYpuuY7uHZXYacEAxVjzZ46ICNc1xDX/iAaA/DIF79h iwZMJT1+Gs3+jh7mnbU+fp0vJA+eafp8z+OXELLEMTWBtkp1imXKjig5X/k3DXAG7a jqeff2obhLKPV39BtxbaXIxVsRmECwSZ7/O2fhqRC9FIFVepH5FQpZFXG5hqJ07WCa GhumeUysmhJxw== Content-Type: text/plain; charset=US-ASCII;

format=flowed

Content-Transfer-Encoding: 7bit Date: Tue, 30 Apr 2024 13:27:03 +0800 From: poiasdpoiasd@cock.li To: abuse@saxrag.com Subject: Sending from WebMail User-Agent: Roundcube Webmail/1.4.15 Message-ID: <07a14e0d75a83f779ade6de65c42db83@cock.li> X-Sender: poiasdpoiasd@cock.li ```

Windows 10. Thunderbird 115.8.0 While trying to figure out why my taskbar badge says I have 99+ unread emails (for the record, I only have 7), I hovered over the tray icon, and it says I have over 4 billion (with a B!) unread emails. That's not even possible with the email address I'm using it for. Why would this be like this, and how do I get it to be accurate?