I-Thunderbird Isithangami Sokwesekwa

Thunderbird v 115.5.0 running Windows 10 When editing an existing filter to add an additional conditions the edit web page fills the laptop screen to where the "submit" button is off the bottom of the screen and cannot be accessed. The page cannot be re-sized. Setting laptop screen to higher resolution has no effect

I've just now noticed the Threading automatic default grouping/marking of messages, and it is appalling. Thunderbird/Mozilla either needs to eliminate this (with appropriate warning notices, perhaps) or at least give us the ability to NOT link various messages. It's not only vastly annoying, it can cause severe real-world problems if anyone not in the CC or BCC fields is receiving these messages that were not intended for them.

I suppose for now, the only way to NOT link things that were never meant to be would be to change the Subject when discussing important topics.

Either that, or get a whole new mail service, which I'd prefer not to have to do.

I am using Thunderbird 115.5.0 and have been suffering double line spacing since I upgraded to this version. I can fix it on a on a per session basis, but when the programme is closed, it defaults to double space again. May I ask when this bug is going to be addressed please? Thanks John.

I am trying to find out how to set the default columns list for my Thunderbird Supernova (115.9.0) installation on Windows 7 Home 64-bit with SP1 - I've followed the instructions in [article] this article, but I'm encountering the following issue:

If I have a folder called (say) "Jo Bloggs" that already has the columns list set that I require and I add a new subfolder (say) "2023", this new subfolder has the application default columns list showing and not the columns list from the parent folder.

Is there any way that I can configure the columns list used by Thunderbird so that all new folders use the same columns list as their parent folder?

A week ago I reported a bug in 115, https://bugzilla.mozilla.org/show_bug.cgi?id=1875103 , which forced me back to 102. This is so far untriaged. Can anyone say roughly how long it will be before this is picked up by the dev team for review? Thanks

When running Thunderbird in Dark Mode, the message pane (that shows the message when you select it from your inbox) still has a white background. This makes perfect sense, because a dark background can easily mess up HTML mails.

Which I know because the compose / reply window does have a dark background, making it all but impossible to read what you're replying to if it was a HTML mail.

I would like to set the view and reply window to use the same background. Can this be achieved or is this a bug?

I am assisting my friend Lindsay in aged care to enable him to continue to use Thunderbird for email. Currently TB will receive mail but unable to send.

This is complicated in that Lindsay is paying iPrimus.com.au a monthly fee to enable him to use an old email address xx@bluep.com. I can log in to the iPrimus web portal to send and receive xx@bluep.com emails, https://webmail.iprimus.com.au/?_task=mail&_mbox=INBOX.

I downloaded Thunderbird version 115.6.0 (64-bit) on my pc this morning and the Auto Set Up configured mail.bluep.com as the incoming (POP) and outgoing (SMTO) servers. Mail is coming in but not sending.

I changed the outgoing server to smtp.iprimus.com.au, default port 587 however messages still cannot be sent and Thunderbird shows that smtp settings must be reconfigured.

I spoke this morning to iPrimus Tech Support who advised the default smtp port should be 25, not 587. However I have found that resetting the smtp port to 25 does not enable emails to send.

Note that I have previously set the smtp port to 587 which enabled sending on non ISP connections. This ability would be required as Lindsay is using whatever Wi-Fi service is available in the facility.

iPrimus Tech Support have suggested I should contact Thunderbird (Mozilla) about this problem.

Can you advise Thunderbird server settings for this situation.

Thanks for you assistance. Regards, Peter M

Thunderbird runs slow...ie when I type an email I can easily type faster than thunderbird will accept characters....(this does not happen in other applications)...this happened about a month ago, and then stopped ( I have no idea why)...but the problem is back. I am running Ver 115.10.0 build 2024012173147. Rebooting windows 11 makes no difference.... I just tried to enter Troubleshoot mode and thunderbird stopped responding....Top line says Mozilla Thunderbird (Not Responding). Thunderbird is connected to my gmail account. ...and I run IMAP....with 'store all messages on the computer', but thunderbird wants to load every email from the server'

Any advice would be appreciated Rick

as from the 19/2 the emails are not coming through also It would not send emails if you can help you can email me back on thevrons@hotmail.com.Thankyou Ron Turner

Running 115.5.0 and want to export my contact list to be able to use it in a spreadsheet. The export function in the Tools dropdown only allows for export of "accounts, messages, address books and settings to a ZIP file." What happened to the ability to export just the address book separately to a csv file? Please help. Thank you.

cant send or recieve eemails for past week get this message???? This message could not be sent because The connection to outgoing server (SMTP) smtp.gmail.com timed out ... Try again ???

I hae no idea why or what to do now if someone could help me that would be great

Sorry I have no idea what any of what is in the Shared Data means

Hi, I have upgraded my computer and Thunderbird, however only the INBOX folder is loading.

I have followed the instructions to migrate the folders from the 'Profile Folder' on the old computer, the data has transferred but is not organised as folders, as on the old computer and of course on the main server.

I don't mind if all the data is not on my computer so long as the Folders are there, empty or not but organised in as they are on the main server.

I'm wondering if I selected an incorrect setting while setting up the account within Thunderbird on the new computer.

Thank you and kind regards, Mark.

bold text All of a sudden today Saturday the 11th Thunderbird stopped sending email on COX but it can receive them. It was working fine then all of a sudden the sending of email stopped. At first I thought that is was Cox being down again, (I've had connection problems this week). But while I was trying to figure it out I received a number of emails. I tried sending a test email to myself usually they go right away but it did not go.

I called Cox. They tech connected to my computer, made some checks, (updated Thunderbird) and after about 20 minutes it started to send messages. 10 minutes later it stopped working AGAIN. This started a four hour telephone marathon with just about every level of service that Cox has. I ended up with Complete Care and while I was on the phone with him and he was connected to my computer the service tech from Cox who was here to check my signal and modem showed up. He tried to look at the problem and could not figure it out. Note I can send and receive mail from the COX email website but and only receive email in Thunderbird.

Cox tells me it is a Mozilla or Thunderbird problem I'm telling them it is not that it is a Cox problem because the server is SENDING me email to Thunderbird but the Cox INCOMING mail server it not connecting to Thunderbird to receive emails. They claim that because I can send and receive on the web page but can not send with Thunderbird. I'm telling them it is a Cox problem.

Anyone else have this issue? Anyone have a solution? I'm shutdown here with over a 25 year history of emails sitting in Thunderbird.

Al

How do I change the order of my email account folders in Thunderbird 115.6? I have multiple accounts and just added another, and I want to move it from the bottom of the sidebar to a higher location. I used to be able to click and move around accounts in the "account settings" mode. Now, that doesn't work. Is there a solution? The instructions provided in the video created by Thunderbird in 2022 doesn't work! Please help!

v115.7.0 I have been a user and contributor for years. OS is still Win7. I have had a IMAP connection to Comcast for years, now it will not connect. I have made sure I am using the correct password. When I start thunderbird, a secondary window pops up with the error message unable to connect. WEnt thru lots of posts but no results. One interesting said to disable IPV6 security option, but the way they described the fix was to access thry the EDIT menu then Preferences, but my system does not have Preferences under Edit.

Rich Dolan Richard.dolan@gmail.com

When Thunderbird is set to synchronize from an iCloud contact CardDAV, it is unable to show the photos for the contact. I am using TB 115 on Windows (problem is platform independent).

Steps to reproduce

1. Have an Apple ID. Use iCloud contact's web UI to create a contact and upload a photo for them.
2. Get an app password for the Apple ID.
3. Add iCloud contact as a CardDAV address book in TB. Should use https://contacts.icloud.com/contacts/ as the carddav location. The actual carddav URL I got is something like https://p123-contacts.icloud.com/12345678901/carddavhome/card/. (not a real link)
4. Sync the address book. The photo would not display correctly.

My investigation

Apple's carddav API server returns in its vcard a HTTP URL as its PHOTO field, like:

PHOTO;VALUE=URI:https://gateway.icloud.com/contacts/12345678901/ck/card/123
 456789abcd12345678abcd1234567

(not a real url; you can export the vcard if you have done the above reproducing steps) However, this URL cannot be directly accessed (would return 401 saying "Missing X-APPLE-WEBAUTH-USER cookie"; see e.g. this github issue). However, the cookie is not really needed; I can use HTTP basic auth with the same credential for the carddav server (in this case it's the apple app password, yourappleid@apple.com:1234-abcd-5678-dcba).

Potential fix

The current implementation directly puts the carddav photo URI into an HTML img tag. I think Thunderbird can make an AJAX request to fetch the image with the credentials and then put the result into an img tag.

Hi, we started getting Thunderbird errors on both inbound and outbound messages when everything was fine earlier this morning on both. We are on Windows 10 running the Thunderbird 115.5.0 (32-bit) Release.

Inbound error message: The STAT command did not succeed. Error getting message number and sizes. Mail server inbound.att.net responded: [SYS/TEMP] Server error - Please try again later. Outbound error message: Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) outbound.att.net was lost in the middle of the transaction. Try again.

Are you all experiencing server issues - I don't believe this is a configuration problem on my side?

I can receive emails but cannot send. The error message I get when sending emails. This began as of the most recent Thunderbird update:

Sending of the message failed. An error occurred while sending mail. The mail server responded: <mjndoug22@me.com>... Relaying denied. IP name possibly forged [70.109.132.97]. Please check the message recipient "mjndoug22@me.com" and try again.

I tried to attach/imbed a screenshot of my SMTP server settings but your Browse button below won't allow the paste.