Yonke imikhiqizo Isithangami Sokwesekwa

I am having problems playing a particularly demanding video from YouTube (https://youtu.be/-W_nFlIAWFM) which runs at 4K/30 fps. It is a video taken from a drone flying over the Matterhorn in Europe. Here is my configuration: 1. I have a 200Mb connection to the internet and bandwidth testing confirms that it runs at a consistent 195 - 202 Mb. 2. I am using Firefox 126.0 on a dual boot machine running Ubuntu 22.04 LTS and Windows 10 (both OSes show similar stuttering and pausing). 3. My hardware is a Gigabyte Aorus Z690i motherboard with 32 GB of RAM and an Intel i5-12600K processor and an NVidia GeFroce RTX 2060 Super graphics card. I have tried disabling "Use hardware acceleration" in Firefox and also disabling all add-ons and rebooting. This hasn't resolved the problem. When I watch the same video in Google Chrome, it seems to display a much slower frame rate than 30fps but doesn't stutter. I have concluded that this video must be a super demanding one to render. There are many picture elements changing constantly. But is there a way to watch this at 4K/30fps with it playing smoothly and at the correct frame rate?

Firefox was running in full screen. Without me doing anything it reduced it's size to about 1/4 screen. Everything I attempted to correct this has not worked . Any thoughts or suggestions on how to correct this is appreciated.

Hi, there - Over the last few months, I've noticed some things that make it impossible to get to websites. I keep getting "Secure Connection Failed," for example, with getting to Chewy.com. I just tried to sign into the ssa.gov website, but it comes back repeatedly as "403 forbidden." And another big one is trying to get to outlook.com. It never fully loads. I cannot get my email. I've been having to use Edge more and more, and I don't like that for privacy issues. Also, sometimes I cannot finish buying things on some websites without changing over to private browsing. Thanks.

I have used a free Hit Counter for many years that I got from https://www.freecounterstat.com/

I have 3 such counters and have stopped working in the latest version of Firefox on my desktop. They work with Firefox on my iPad and Android phone. They also work fine if I use the Edge Browser but I prefer using Firefox as I have for many years.

The embedded code is pretty simple, here it is for one of my counters... <a href="https://www.freecounterstat.com" title="visitor counter"></a> Can you help? Thanks, Bill T

Hello, I recently installed Ubuntu 24.04 with the version of Thunderbird (115.10.1) supplied with the distribution. I can no longer display mail saved as .eml in a remote folder (sftp). Thunderbird opens, but the mail window is empty. If I ask for the source code, this message appears:

Unable to read file at address view-source:file:///run/user/1000/kio-fuse-ouSeRu/sftp/myuser@myserver/mymessage.eml?type=application/x-message-display.

If I open from CLI I get this message :

JavaScript error: chrome://messenger/content/aboutMessage.js, line 218: NS_ERROR_FILE_ACCESS_DENIED: Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED) [nsIMsgDBHdr.mime2DecodedSubject]

If I open the save file with a file editor I'm able to see the source code.

Could you please help me? Thanks

Hello, so when I watch youtube on FF my cpu usage goes up alot and the fans go nuts. I have a very capable i5, rtx3070 machine and this issue started just a couple of days ago. I have not done any changes or updates which could trigger this problem. The problem starts mainly when I Watch in full screen mode or have multiple non-fullscreen vids active. All other apps show no signs of problem. I can watch the exact same video in Edge, no fans/high cpu, VLC works fine, Chrome is OK, it's only in FF that the problem occurs.

I have tried the following: 1.Reinstalling FF 2. Activating HW acceleration in FF and forcing it in Windows11 3. Theatre mode is off and all other YT settings are off. 4. Updated Nvidia and windows 5. FF is the latest version. 6. Disabled all my addons/plugins

No clue what can cause this..

I am currently using T-Bird 115.11 on Windows 10. Not that it matters much, because I have had this problem continually for years with various editions of Thunderbird on Win7 as well. Often when I open Thunderbird, I discover it has created hundreds and even thousands (today 65,000) duplicates of emails in various mailboxes. This has nothing to do with downloading. The emails in question were downloaded weeks or even months ago, and I havev't accessed them. Another problem is that Thunderbird creates emails dated in 1970, even before anyone thought of the internet, let alone PCs or emails. Why is this happening? How can I prevent it?

Hi everyone,

I have a problem with my T-Online account.

Thunderbird ESR 115.11.0

Windows 11

IMAP

As soon as I open Thunderbird, all 8400 mails in the account are deleted.

Only the mails from yesterday and today are still there. The account also works - sending and receiving.

Other accounts (Gmail and Strato ) are ok.

Have copied an offline backup of the account to TB - as soon as I go online the mails are deleted again.

Copying and moving the mails offline to a local folder does not work either.

TB first tries to establish a connection to the server - which of course doesn't work offline.

Would hate to reinstall as there are a lot of local folders.

I'm at a bit of a loss - thanks for your help

My email for my domain (Gailfisher@Resourcesforchange.com) hosted by GoDaddy. Has been working correctly for years, but now when trying to send from TB, I get a message to enter password that does not work (it does work on my webhost's platform). Using Windows 10, TB version 115.11.0. BTW, I have another email via AOL that is working just fine on TB. I tried Safe mode -no go I tried following GoDaddy's instructions for IMAP but also did not work. FYI The GoDaddy help desk said: "Please match the server settings with the below server settings. Username Your email address Password Your email account's password Incoming servermail.[your domain name] Incoming ports IMAP - 143 POP - 110 Outgoing servermail.[your domain name] SMTP (outgoing) ports25 (587 or 80 might also work) IMAP use port 143" I tried setting up a new account in TB using email adddress and a new username, but that created the same problem. Here are the relevant screenshots. Thanks for your help!

This has been a problem for a while, currently on Firefox 126.0 and Nvidia 550.78. I can work around the problem by forcing webrender to use software mode.

When using HW accelerated webrender with my Nvidia graphics card everything works fine until the PC wakes from sleep, then graphics are broken and Firefox needs restarting. Most noticeable for me is when looking at Grafana graphs they will look like random lines, and my Frigate NVR snapshots only display some of the time.

Is there anywhere in Firefox that will show a log of any error messages to do with the graphics card? I would like to try and fix the problem rather than disabling HW acceleration, but with no logs to look at that is impossible. No other programs seem to have a problem with resuming from sleep, and no error messages are shown in any of the system logs.

It takes a lot longer than it should to load my home page, MSN. This problem is more pronounced with Firefox than other browsers. What can be done to load the home page faster? And, in general to load websites? Can someone help? Thank you.

YouTube content doesn't load. Same with NYTimes.com articles.

Up to date, no extensions, no add-ons.

Running Sonoma 14.4.1

Safari and Chrome work as expected.

Hi, just upgrade to Windows1 and did a new installation from Thunderbird. latest version 115.11.0 (32-bits) But the new messages are almost directly market as read even with setting mark messages automatic as read set to no? On a other pc with Windows11 I had the same problem with the 64bit version but going to the 32bit version solved the problem. Any Idea how to solved this problem? Regards Karina

I permanently deleted all messages in a folder (call it "Unwanted"), then moved Unwanted to Trash, then deleted it permanently. It appeared to be gone. However the next time I opened Thunderbird, Unwanted was back. I tried this several times with the same result. I tried renaming it to "DeleteMe" but then I got the message "The folder could not be renamed. Perhaps the folder is being reparsed, or the new name is not a valid folder name."

Once again, I "permanently" deleted Unwanted and closed Thunderbird. Using a file manager, I found and deleted all relevant folders and files matching "Trash.*" and "Unwanted*.*" and rebooted the computer. However when I opened Thunderbird, an empty "Trash" folder was regenerated as expected, but the "Unwanted" folder was back.

How can I get rid of Unwanted? Thanks!

We have a noticed a very strange behaviour with the latest FireFox (126). One of our webpage is behaving differently across our Integration and production environment. Both env are running identical code and similar network stack the only difference we have noticed so far is for our Integration env Firefox is sending the different user-agent string than for production.

Steps to reproduce: 1. Open https://integration4-view.publitas.com/automation-int4/reader-happy-path/page/1

2. Go to console and view navigator.userAgent the user-agent string will be:

    "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:126.0) Gecko/20100101 Firefox/126.0" 

3. Now open the same content on production -> https://view.publitas.com/automation-prod/reader-happy-path/page/1

4. Go to console and view navigator.userAgent the user-agent string will be:

   "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) FxQuantum/126.0 AppleWebKit/537.36 (KHTML, like Gecko) Chrome/103.0.5060.71 Safari/537.36" 

Our website changes behaviour based on which browser it is and based on second string our backend interprets the browser as chrome instead of Firefox.

If I change privacy.resistFingerprinting to True then the user-agent string is sent correctly.

Can you please help us identify what changed in the latest version that is causing this behaviour.

Version: 126 (64 bit) Test on Windows 11 and Mac OSX

I've been noticing apparent duplicate messages within my unified folders inbox on my desktop recently.

Looking further I notice that one of my accounts has 'INBOX' as one of its subfolders which is where the problem appears to stem from. When I look at that account in isolation (ie not in unified folders) I can still see the inbox as a subfolder.

The subfolder 'INBOX' appears to be a duplicate of the account's main inbox (it contains the same number of emails), which may account for the appearance of duplicates.

At a guess this is probably related to inadvertent moving of folders. I find that when trying to use the scroll bar (to scroll down the subfolder list), if the mouse strays slightly to the left it will pick up a subfolder and move it unintentionally. This can cause all sorts of problems with disappearing emails and the folder structures showing differently on different computers.

In this case the duplicate email problem only happens on my desktop. On my laptop I can still see a subfolder named 'INBOX' but it shows as empty and I don't see the duplicate emails in unified folders.

It would be really useful if Mozilla could introduce a 'confirm folder move' feature as that would eradicate inadvertent moves.

How do I resolve the apparent duplicate emails on my desktop? I am somewhat reticent to delete the subfolder 'INBOX' for fear of the potential consequences. . .

I am using a Mac with Big Sur (macOS Monterey, Version 12.7.5), and my email is POP, using Thunderbird Version 115.11.0.The message count of my inbox is wrong. It is two (2) more than it actually is. Right now there are ten (10) messages in my inbox BUT the message count of my inbox says twelve (12). Please correct.

In release 126.0 (64-bit) in Windows, persist logs in developer tools is not working for me. I've tried selecting and deselecting all the combinations in both settings areas in the split console, quitting the browser in between. Is there a new place to set this?

I am using a Mac with Big Sur (macOS Monterey, Version 12.7.5), and my email is POP, using Thunderbird Version 115.11.0. I first retrieve the mail header, then I click on "Download the rest of the message" if I wish to read the full message. When I click "Download the rest of the message" to see the contents of the actual message Thunderbird downloads the rest of the message, highlights the message (new) but then displays the next message in the list of messages in my inbox. The message I had wanted to read now becomes the previous message in the list in my inbox. I then have to go back and click on the message itself to see its contents. Please correct.