Yonke imikhiqizo Isithangami Sokwesekwa

I've been using Firefox on my Android device, and I recently started using a VPN to enhance my online privacy. However, I've noticed that since I started using the VPN, the performance of Firefox has declined significantly. Pages take longer to load, and sometimes I experience connection issues.

Is there a way to optimize Firefox performance when using a VPN on Android? Are there specific settings or configurations within Firefox or the VPN app that I should be aware of to improve browsing speed and stability?

Any advice or tips from those who have faced similar issues would be greatly appreciated!

Thanks in advance for your help!

How can I find or add the translate icon to the toolbar. I did a screenshot but can't see how to insert it. My tool bar has only a toggle reader icon and a favorites icon after the url in the address bar. translate does seem to work automatically on the first page of website, but then does not work on other tabs of the same website. screen shot added

What's the best way to set up Startpage private search in Firefox? Should I manually change the settings or install the extension? Also, it seems like Firefox could improve the process for us.

In the image mu mailbox shows the number of unread messages 234, the total number of message 1003 and the storage used 77.9 MB. I set tese options using a little button and then foolishly clicked another little button that hid the option to choose what to display. I am unable to turn that second button on again and so cannot comntrol the display of inbox usage. How do I turn that button back on? Thanks for any help.

115.05 when I started.

I typically open Thunderbird about once a month, download my emails from a hosted website, do some clean up, write some emails, close Thunderbird, and do the same about a month later.

Today I opened Thunderbird, saw that it was downloading around 400 emails in the lower left corner, and waited patiently, as per usual. When "done", however, none of them showed up in the main window. The latest email did not change, was still from around a month ago. When I ask Thunderbird to Get Messages it says there are no new emails to download.

I restarted Thunderbird several times, no change.

I then upgraded to 115.10, hoping this might fix the issue, but it has not.

Since restarting Thunderbird, 2 new emails have come in and are showing correctly, but none of the initial 400 emails "downloaded" today are showing anywhere.

I repaired the Inbox folder (right click > Properties > Repair Folder), no help. I renamed the "Inbox.msf" file and had Thunderbird rebuild it, no help. I renamed the "global-messages-db.sqlite" file and had Thunderbird rebuild it, no help. View Ignored Threads does not help. View > Threads > All is selected. Emails are not in the Trash folder, or any other folder.

All of the initial batch of 400 emails - and the emails I had previously opened - just disappeared.

Opening up the Inbox MBOX file directly, I can see that these 400 emails were never actually downloaded into this file. Not sure what happened.

Opening up my remote email host, I can see that those 400 emails are still there, to the exact point when I last closed Thunderbird.

Asking Thunderbird to download new messages does not download these remote emails.

How do I reset Thunderbird to start the process over and re-download these emails again? Part of TB seems to think it's already downloaded these emails, while another part of TB never actually did.

Does anyone have any idea what to do here?

When I try to customize the toolbar in Firefox 115.10, the browser tries to change the page to the customize toolbar / overflow toolbar page. However the page flashes on and then reverts to the normal browser page. The page showing customize toolbar/ overflow toolbar, is transient and does not last. So I can't even customize the order of the buttons on my toolbar. This wasn't a problem a few days ago before the switch to this latest version. In particular I am trying to change the position of the "home" button to the left side of the address box. I just can't bring up the customize toolbar page. I'm not talking about the position of the add-on or extension buttons...just the home button. Hope this is clear. By the way, I've even tried this in safe mode to no avail.

When I open a new tab, I can't automatically start searching anymore.

Here's a video: https://www.loom.com/share/ebcc8685187a4e2284cf40b75f7e134e?sid=9b0a3db3-fcac-4bae-9ff9-cdbe2b8b955b

Now, I have to click into the search bar to type. That's annoying.

Anyone know how to fix this?

Hey there, I had two windows in firefox open, one of which had a lot of tabs. I was using firefox on my surface pro, and then got up to get a snack. I came back, and the window, which I had been using for some time, was gone. The other window was still open, and firefox had not been closed. I thought I would just open it up by restoring recently closed window, but it was gone. I routinely clear my history, but even tabs that I just had open 5 minutes ago are missing from my history, like I never opened them in the first place. What is going on?

Somebody thought that it is a GREAT idea to make drag-n-drop cursor a GIANT rectanglular thumbnail of the emails being dragged.

No, this is a horrible idea because that thumbnail covers the target of the drag-and-drop.

Either REVERT this IMMEDIATELY or let us know how to disable and revert to the simple drag-n-drop mouse cursor that does not obstruct the target of the drag.

And in the future AVOID any GUI changes that are not ABSOLUTELY NECESSARY. With these poorly thought through, extremely annoying changes you are only causing damage and aggravation.

I am setting up a new Windows 11 Computer and am trying to install Thunderbird. I have downloaded TB (Thunderbird Setup 115.10.2) to my Download Folder. I double click on that file to run the Setup program, complete the user account information and TB and select Continue. TB completes the search and displays the correct account (att.net) connection information, SMP, POP3, Ports, etc. I select DONE and the Checking Password box displays. It runs for a few minutes and an Error message displays: "Unable to log in at server. Probably wrong configuration, user name or password." If I select Configure Manually, a window displays showing the correct configuration information (I have checked it four times). I will note that "Normal Password" has been selected for Authentication Method in case that is important. I have tried this method several times and get the same Error message. Any help will be greatly appreciated. Thank you.

I have attached a screenshot of the configuration window. Note: My account is with att.net but I am still using my old pacbell.net account that was merged with ATT many years ago.

I'm up to the most current version of Firefox

120.0.1 (64-bit) Windows 11

For this and the last versions over a couple of years whenever I go to;

https://www.linkedin.com

Then try to go to any other page like https://nextdoor.com from a bookmark, it stays on linkedin.

If I enter the address by typing it in, it works.

Video of the issue

If i open a link to redirect to an app, let’s say wikipedia, it will redirect fine. When i switch back to Firefox, the mobile version of the link i clicked on will be loaded instead of just displaying search engine search results where i clicked the wikipedia link. (Admin note: edited to fix formatting issue)

Another thing that happens is if i click on the link, still being wikipedia, get redirected to the app, then close out firefox, the next time i open firefox, it will redirect me back to the wikipedia app.

This issue I have been having is not just related to Wikipedia, this is for any other link that may open a related app I have installed on my phone.

iOS 17.5 iPhone 14 Pro

Hi All,

I would like to change the url border color when it has the focus to blue.

The code below works, except when you press Escape.

After hitting Escape, the urlbar still has the focus but its border changes back to gray. It should remain blue.

I would also like to remove the box-shadow after pressing Escape, when the urlbar is not expanded (to mimic the behavior of FF 88).

The url and search input fields also do the same goofy thing Windows 10 does - the cursor stops blinking after 5 blinks and remains frozen. Any way to remove that behavior and keep the cursor blinking? If not, no big deal, the other stuff above is more important.

Any code suggestions to get that behavior are welcome!

/* set the initial borders of the urlbar and search bar to gray */
#urlbar > #urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background, #searchbar { border: 1px solid #a1a6b5 !important; outline: none !important; border-radius: 0px !important; }

/* set urlbar border to blue when focused */
#urlbar[breakout][breakout-extend] #urlbar-background {
   border-color: #0078d7 !important;
}

Hi All,

I'm trying to set the border color for my url & search bars to gray when non-focused, and blue when receiving the focus.

The following code works for the search bar, but the url bar is receiving a separate blue border around the gray border, instead of changing the color from gray to blue.

Can someone suggest how I might set the url bar to blue (just a single border, not the double it has now), both when it has focus and when it's expanded?

Thank you!

/* set non-focused url & search bars to gray border */
#urlbar > #urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background, #searchbar { border: 1px solid #a1a6b5 !important; outline: none !important; border-radius: 0px !important; }

/* set focused search bar to blue border */
#urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background:focus-within, #searchbar:focus-within { border: 1px solid #0078d7 !important; }

/* set focused url bar to blue border */
#urlbar-background, #urlbar[breakout][breakout-extend] > #urlbar-background:focus-within, #urlbar:focus-within { border: 1px solid #0078d7 !important; }

I am currently trying to set up extra SMTP servers for additional identities in my e-mail account. I would like to use the Amazon service for this.

However, as soon as I try to send an email with the data provided by AWS, I get an error message:

"Sending of the message failed. The Outgoing server (SMTP) <ses-smtp-server-url> does not support the selected authentication method. Please change the 'Authentication method' in 'Account Settings | Outgoing Server (SMTP)'."

Changing the "Authentication method" did not work either. If I enter the same data in gmail as "Send mail as" (the equivalent to the extra identity of Thunderbird), the connection in the GUI of gmail works without any problems and I can send e-mails via it. So it can't be the data or the configuration of the SES.

I am afraid that Thunderbird does not yet support the newer protocols that SES requires. Does anyone here have any ideas?

Server: <ses-smtp-server-url> Port 587 Connection security: STARTTLS Auth. method: Encrypted password User Name: <username>

Hey, so, I've seen this question a couple times when I searched, but (a) there didn't seem to be any solution and (b) they were all regarding Macs and I'm on Windows 11 v 23H2. I keep getting bubbles saying that Firefox wasn't able to check for updates- not that it couldn't download or install updates, but it couldn't search for one. I also did the "about Firefox" thing and it gives me the same message. Both of these have been going on for a couple days and I have attempted restarting Firefox multiple times and did a manual update [125.0.1 (64-bit)] just in case there was a problem there. Now, I've tried the tips from the other threads (turning off the proxy, checking any anti-update policies, and checking the add.update.url in the config settings) with no luck. So in an effort to either bump the question or get any Windows oriented answers... Thanks muchly