顯示下列標籤的問題: 顯示所有問題
  • 已解決

Opening Firefox on Debian 12 stable forces the home directory to remount as read-only

I woke up this morning to my home directory having been remounted as read-only (it has its own dedicated hard drive at /dev/sdd1). I ran e2fsck and things looked good, so… (閱讀更多)

I woke up this morning to my home directory having been remounted as read-only (it has its own dedicated hard drive at /dev/sdd1). I ran e2fsck and things looked good, so I restarted and things were fine again.

However, whenever I open Firefox, it hangs for about 1 full minute before it goes haywire and renders the entire system essentially unusable since being able to access my home directory is vital. The following is visible in dmesg:

[ 2710.362946] Aborting journal on device sdd1-8. [ 2710.363000] EXT4-fs warning (device sdd1): ext4_end_bio:343: I/O error 5 writing to inode 10520593 starting block 44134769) [ 2710.363008] Buffer I/O error on device sdd1, logical block 44134513 [ 2710.363041] EXT4-fs error (device sdd1): ext4_journal_check_start:84: comm glean.dispatche: Detected aborted journal [ 2710.363048] EXT4-fs warning (device sdd1): ext4_dx_find_entry:1795: inode #9718667: lblock 2: comm Renderer: error -5 reading directory block [ 2710.363076] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1082: inode #9701223: lblock 1: comm Cache2 I/O: error -5 reading directory block [ 2710.800016] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm BgIOThr~ool #12: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.812447] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm Backgro~Pool #1: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.884557] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9976467: comm Backgro~Pool #1: No space for directory leaf checksum. Please run e2fsck -D. [ 2710.980923] EXT4-fs (sdd1): Remounting filesystem read-only [ 2711.049635] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D. [ 2711.152739] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D. [ 2711.152757] EXT4-fs warning (device sdd1): ext4_dirblock_csum_verify:405: inode #9701223: comm Cache2 I/O: No space for directory leaf checksum. Please run e2fsck -D.

All other programs that I use daily do not cause this issue. No clue what to do here. LibreWolf works fine - that's what I'm using now that Firefox breaks everything and basically forces me to restart if I want to use my computer normally.

noah 於 1 週前 詢問

noah 於 2 天前 解答

  • 已解決

IFRAME is not displayed

Dear friends, I have Firefox Browser 127.0 (64-bit) installed. IFRAME is not displayed on some websites. Example: https://www.rollerfreunde-untermain.de/gaeste.htm Att… (閱讀更多)

Dear friends,

I have Firefox Browser 127.0 (64-bit) installed. IFRAME is not displayed on some websites.

Example: https://www.rollerfreunde-untermain.de/gaeste.htm

Attached you will find a screen shot.

Can anyone say why this is the case?

Kind regards Uwe

haller-mtl 於 5 天前 詢問

TyDraniu 於 4 天前 解答

  • 已解決

Firefox on Linux does not allow entries in forms that are called up in IFRAME.

Dear friends, Firefox on Linux does not allow entries in forms that are called up in IFRAME. It works perfectly on Android. Does anyone know why this is the case? Uwe … (閱讀更多)

Dear friends,

Firefox on Linux does not allow entries in forms that are called up in IFRAME. It works perfectly on Android.

Does anyone know why this is the case? Uwe

Firefox 127.0 (64-Bit)

haller-mtl 於 1 週前 詢問

jonzn4SUSE 於 1 週前 解答

  • 已解決

Bing Maps causes firefox to crash

When I open Firefox and call up bing maps , it starts to load the page , then Firefox crashes . Has been doing this for several firefox versions . Looking at the crash r… (閱讀更多)

When I open Firefox and call up bing maps , it starts to load the page , then Firefox crashes . Has been doing this for several firefox versions . Looking at the crash report , I always get "The debug symbols are missing for firefox. Please install firefox-dbg." but I can't find firefox-dbg to load

jones2347 於 3 週前 詢問

jones2347 於 2 週前 解答

  • 已解決

Wrong focus when right-clicking on a bookmark (126.0 for Linux Mint)

Since the latest update, when I right-click on a bookmark or an item in the history list (from the menu or the bookmarks toolbar), I still get the menu that has items lik… (閱讀更多)

Since the latest update, when I right-click on a bookmark or an item in the history list (from the menu or the bookmarks toolbar), I still get the menu that has items like "Open in new tab" or "Edit Bookmark".

However, the focus for the mouse stays on the previous menu, so that I can't click on anything in the "right-click menu", instead it is interpreted as a click in some random item in the previous menu.

Going into troubleshoot mode didn't help, so I don't think it's my configuration causing this.

christinetobler 於 3 週前 詢問

jonzn4SUSE 於 3 週前 解答

  • 已解決

Language in menu of FF 126.0 is mixed up

Hello, I have a problem: After an automatic update of the language packs, parts of the Firefox menu (version 126.0) are displayed in EN. Parts in DE. Seems to be related… (閱讀更多)

Hello, I have a problem: After an automatic update of the language packs, parts of the Firefox menu (version 126.0) are displayed in EN. Parts in DE. Seems to be related to the update... how can I change this again? I have already changed the language settings. Didn't help...it appeared after an automatic update on May 28. Thanks for an idea :)

fibroblast 於 4 週前 詢問

Paul 於 3 週前 解答

  • 已解決

Taking webpage screenshot from command line

Hi. i have no results while doing this: https://dpaste.com/FTXPQ46ZL# No error, no screenshot. "Screenshot" flags in default state, about:policies - inactive. … (閱讀更多)

Hi. i have no results while doing this: https://dpaste.com/FTXPQ46ZL# No error, no screenshot. "Screenshot" flags in default state, about:policies - inactive.

qwertikator 於 1 個月前 詢問

cor-el 於 1 個月前 解答

  • 已解決
  • 封存

Firefox freezes when handling tabs

Hello everyone. Since installing Linux Mint in May 2023 I have been having this issue with Firefox. Description of issue: When I switch between (or drag) tabs in a Firef… (閱讀更多)

Hello everyone. Since installing Linux Mint in May 2023 I have been having this issue with Firefox.

Description of issue: When I switch between (or drag) tabs in a Firefox window, the whole window becomes unresponsive, with the last tab I was switching from still in front. Often the contents of the window start to flash (disappear and reappear, leaving a black backgground) every 2 seconds. I can drag the window around, scroll, minimize it, but it is impossible to give any input in any tab. The only action somewhat possible to do inside the window is bring other tabs in front, it is still quite hard for the input to register, and if it does, it takes 10+ seconds. The issue goes away if I close the specific Firefox window, or if I manage to select and drag one tab out of the frozen window into its own new window. Then everything works as intended, like nothing ever happened.

I can reliably cause the freeze-up in a short time by holding CTRL+TAB and drag one tab to change the order while firefox cycles through the tabs in the open window.

While the window is frozen, the rest of the desktop is responsive as normal, even other Firefox windows. If I try to interact with the frozen window I can rarely see spikes of CPU usage. RAM stays at normal usage levels, far from being full.

What I have tried so far that has had no effect on the appearance of the issue:

1) Disabling all extensions i have

2) Run in troubleshooting mode

2) "Create a new places database" as suggested [https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding#w_fi...]

3) Disabled hardware acceleration

4) Creaing a new firefox user profile

5) Use "Refresh Firefox" from the troubleshooting page

6) Use the Flatpak version of firefox

7) Reinstall firefox

Here is my system information

here

nico.venuti 於 6 個月前 詢問

zeroknight 於 6 個月前 解答

  • 已解決

Firefox takes ages to launch on my fedora 40

After upgrading to fedora 40, firefox just takes ages to boot up, even when it's running if I want to open a new window it still takes ages to run. I have tried uninstall… (閱讀更多)

After upgrading to fedora 40, firefox just takes ages to boot up, even when it's running if I want to open a new window it still takes ages to run. I have tried uninstalling it and deleting it's data but with no luck. The issue still presists.

alinada 於 1 個月前 詢問

zeroknight 於 1 個月前 解答

  • 已解決

WebGL creation failed after reinstalling lbgl1* libegl*

I am using the apt version of firefox v125.0.2 (64-bit). I do not have a dedicated GPU - I use my intel core's internal gpu only Intel Corporation HD Graphics 620 (rev 02… (閱讀更多)

I am using the apt version of firefox v125.0.2 (64-bit). I do not have a dedicated GPU - I use my intel core's internal gpu only Intel Corporation HD Graphics 620 (rev 02).

I used to play this game named narrow.one, which before I reinstalled the mentioned libraries, was working fine except for crashing a few times. I thought these libraries were causing some issue, so I tried reinstalling them.

I reinstalled the libraries using: `sudo apt install --reinstall --fix-missing libgl1* libegl*`

After installation, I start getting that error. So, I tried reinstalling firefox (using the same command), and then restarting the laptop - but of no use. Chrome seems to be running WebGL, including the game.

In firefox, on the https://get.webgl.org/ page, I see Hmm. While your browser seems to support WebGL, it is disabled or unavailable. If possible, please ensure that you are running the latest drivers for your video card.

After that, I also tried reinstalling `libopengl0` and `libglu1-mesa` and `intel-microcode`, but of no use. Running although, `sudo intel_gpu_top` and then chrome, it seems that the GPU is in use by chrome as well.

I then go to about:support. It shows me the images I have attached. Reading the logs, there several `blocklisted` values in `Decision Log` section. I suspect that's the cause of this issue, but then I don't know how can I un-blocklist the blocklisted things, and even after that, why does Chrome runs webgl if these are blocklisted?

Running `glxinfo -B`, I get the following: `name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer):

   Vendor: Intel (0x8086)
   Device: Mesa Intel(R) HD Graphics 620 (KBL GT2) (0x5916)
   Version: 23.2.1
   Accelerated: yes
   Video memory: 7697MB
   Unified memory: yes
   Preferred profile: core (0x1)
   Max core profile version: 4.6
   Max compat profile version: 4.6
   Max GLES1 profile version: 1.1
   Max GLES[23] profile version: 3.2

OpenGL vendor string: Intel OpenGL renderer string: Mesa Intel(R) HD Graphics 620 (KBL GT2) OpenGL core profile version string: 4.6 (Core Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL core profile shading language version string: 4.60 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 23.2.1-1ubuntu3.1 OpenGL shading language version string: 4.60 OpenGL context flags: (none) OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 23.2.1-1ubuntu3.1 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20`

I do not know much about OpenGL, but reading the above stuff, I suppose my GPU is in use and also has a compatible driver (although I am not sure).

Also, running `glxdemo`, `glxheads`, and `glxgears` seems to be rendering stuff.

Should I reinstall firefox after purging it first? Please help.

Thanks!

Lakshay Rohila 於 2 個月前 詢問

zeroknight 於 2 個月前 解答

  • 已解決

Firefox input lag on Ubuntu 22.04

Hello Good People, I noticed that the snap version of Firefox had a lag issue when typing into input field. For example, when composing an email and wanting to use backs… (閱讀更多)

Hello Good People,

I noticed that the snap version of Firefox had a lag issue when typing into input field. For example, when composing an email and wanting to use backspace to quickly delete a misspelled word, then backspace works slowly, stuttering and jittering. If I hold down a key in the input field it also lays the character down in a stuttery, slow way.

I tried reinstalling the system and that solved the issue. But it has returned again. Maybe it was an update. I also installed WINE and waybridge to get some windows plugins to work on my DAW. I don't know if that has affected it.

I also tried removing the snap version and installing firefox using the terminal but the problem persisted.

It's an annoying problem. Any advice appreciated.

m.p.hammond 於 2 個月前 詢問

jonzn4SUSE 於 2 個月前 解答

  • 已解決

Firefox browser starts flickering when maximized and when the theme is dark.

Hello, I'm using samsung odyssey g7 32' monitor connected to my laptop with a rtx 2060. The monitor is connected with a minidisplay port to display port cable. The proble… (閱讀更多)

Hello, I'm using samsung odyssey g7 32' monitor connected to my laptop with a rtx 2060. The monitor is connected with a minidisplay port to display port cable. The problem doesn't occur on the laptop screen but it does on the samsung screen. The flickering stops when i make the window a little smaller. I am using KDE plasma 6.0.3 but the problem was also present when i was using Hyprland as my desktop enviroment. I tried troubleshoot mode but nothing changed. I am seeking help. Thanks.

ersandemircan57 於 2 個月前 詢問

jonzn4SUSE 於 2 個月前 解答

  • 已解決

Can't access bispebjerghospital.dk with max protection

I want to visit http://bispebjerghospital.dk/ . I have seen on https://www.whatsmydns.net/#A/www.bispebjerghospital.dk that it's DNS isn't propagating correctly, so I tur… (閱讀更多)

I want to visit http://bispebjerghospital.dk/ . I have seen on https://www.whatsmydns.net/#A/www.bispebjerghospital.dk that it's DNS isn't propagating correctly, so I turned on "MAX PROTECTION" for DNS, hoping that it would let me see the site.

But Firefox showed me "Unexpected error" the first time I went to the site. And then I clicked 'always allow' and now it just spins and spins with no response visible.

How can I visit the website from one of the countries with red X's on whatsmydns?

Janus Troelsen 於 2 個月前 詢問

Janus Troelsen 於 2 個月前 解答

  • 已解決

Keys do not repeat when held in Gmail

When editing in Gmail, holding a key down does NOT repeat the character or action. e.g. xxxxx when holding down the "x" or deleting multiple characters when holding down … (閱讀更多)

When editing in Gmail, holding a key down does NOT repeat the character or action. e.g. xxxxx when holding down the "x" or deleting multiple characters when holding down the <Backspace> key.

It works properly in other apps (e.g. this dialogue).

And works okay in Gmail in other browsers (e.g. Chromium or Brave).

I'm using Firefox 124 on Linux Mint 20.1.

System: Kernel: 5.4.0-174-generic x86_64 bits: 64 compiler: gcc v: 9.4.0

          Desktop: Cinnamon 5.2.7 wm: muffin dm: LightDM Distro: Linux Mint 20.3 Una 
          base: Ubuntu 20.04 focal

DPB.Almonte 於 2 個月前 詢問

jscher2000 - Support Volunteer 於 2 個月前 解答

  • 已解決

Firefox hangs after switching between virtual terminals (Linux)

Hi, I like to use separate user accounts / X sessions for work and personal stuff. Whenever I switch from one session to another (ctrl+alt+Fx), it usually takes a few mi… (閱讀更多)

Hi,

I like to use separate user accounts / X sessions for work and personal stuff. Whenever I switch from one session to another (ctrl+alt+Fx), it usually takes a few minutes for Firefox to get responsive again. Sometimes it never does (typically on Mondays, after working in my "personal" session all week end, and switching back to my "work" session). Other applications (xterm, qpdfviewer, etc...) don't seem to be affected at all. Is there something I can do to fix that ?

Thanks,

 -Olivier.

oprs 於 2 個月前 詢問

oprs 於 2 個月前 解答

  • 已解決

typing lag in large text input fields

Above 70-75k characters, text input fields on any site have a ton of input lag -- like, I have to wait 10s after I type a sentence for the sentence to finish slowly updat… (閱讀更多)

Above 70-75k characters, text input fields on any site have a ton of input lag -- like, I have to wait 10s after I type a sentence for the sentence to finish slowly updating letter by letter. I've tested across multiple sites, and in Private mode (to confirm it's not caused by extensions, none of which are allowed in Private mode).

I also tried setting `accessibility.force_disabled=1` as suggested here and here, but that didn't help (and yes, I restarted). Disabling hardware acceleration didn't help either.

npfoss 於 3 個月前 詢問

zeroknight 於 2 個月前 解答

  • 已解決

Firefox randomly slow at startup

Hello, For an unknown reason, my firefox sometimes is really slow to startup. It can take up to 10 minutes before the webpage start to load. My hardware is not that bad… (閱讀更多)

Hello,

For an unknown reason, my firefox sometimes is really slow to startup.

It can take up to 10 minutes before the webpage start to load. My hardware is not that bad. I try to use the "performance" to capture the issue : https://share.firefox.dev/3x2rgHj I don't know if there is something to see because, the tool is also slow.

It happens on 3 different computers on linux.

I try to disable all extensions and without telemetry but nothing change. I'm reporting the problem now but it's much older

If you have a idea to fix this issue please share because it's really annoying.

Inglebard 於 3 個月前 詢問

zeroknight 於 3 個月前 解答

  • 已解決

Firefox won't start

I get this error in my console XPCOMGlueLoad error for file /usr/lib/firefox/libmozgtk.so: libwayland-client.so.0: failed to map segment from shared object Couldn't load … (閱讀更多)

I get this error in my console XPCOMGlueLoad error for file /usr/lib/firefox/libmozgtk.so: libwayland-client.so.0: failed to map segment from shared object Couldn't load XPCOM.

xander327.ag 於 3 個月前 詢問

jonzn4SUSE 於 3 個月前 解答