அனைத்துத் தயாரிப்புகள் ஆதரவு மன்றம்

Hello, I have not really a problem, but I want to know: how is it possible to get spam-emails without showing my email adress? In a normal list I can see the receiver adresses, in these spam emails with cryptical receiver that is not possible; I get even spam emails without any shown receiver Is this possible with BCC-Adresses?

With kind regards Hilhof

Hello, I am a tinkerer and I would like to tweak my Firefox Developer Edition to suit my tastes, but I don't know what each of the preference commands does. Could you provide a list explaining what each command does and, if possible, how to use them? I don't want to reinstall Firefox.italic text I prefer to do things properly. Thanks

I have just completely reinstalled Thunderbird v115.11.1 after uninstalling the previous installation. There are two problems, possibly linked to a faulty or missing setting.

Remote images will not display, even after specifically enabling remote images for each email, or after turning on "display remote content" as a default. Also it claims there is a potential security threat with Thunderbird's own web addresses: "live.thunderbird.net." and "addons.thunderbird.net.".

I have attached screen-shots of the error messages, and of a thunderbird email that fails to display its images.

Hello, Since a couple of weeks I'm facing a strange issue on my Firefox installed on my desktop (arch linux) where the suggestions window that appears when clicking the URL address bar, is shifted upwards and covers the address bar itself and the majority of the bookmarks. Has anyone experienced a similar issue and is able to point me towards some troubleshooting steps? Thanks!

Not so newbee here. Very long career in S/W, but 20 years as a Luddite so now trying to catch up.

3 gmail accs - all good. 3 hotkey accs - receive ok, but cannot send - broken recently. These old legacy accs were taken over by iPrimus but are still visible/SameSameBroken at hotkey webmail.

1 of the 3 hotkey is set to Default. It is MORE broken than the other 2. How do I remove this Default? I will choose a gmail account to be the Default. But how exactly do i unDefault the hotkey acc.

No, I don't need nor want, to use iPrimus pop/smtp settings. Yes, the broken hotkey smtp issue is probably no biggy - just work in hand.

Thanks for any assistance... I see this thread is very busy. ps, I remain committed to the goals of Open (free) Software. If only the worldview was as committed, how good it would be for everyone!

Recently the email display has been changed and not by me. At present I cannot receive emails as previously. Also I wish to revert to the previous display of my emails if possible. I can access email via the email.telstra,com site but I wish to stay with Thunderbird. I also do not get emails to my mobile as before

Is there a way to schedule a time (daily or weekly) during which Thunderbird doesn't check for new mail?

I have several mail accounts, some for work, some private. I want Thunderbird checking for new mail on my work accounts during my work hours, and pause checking when I get off work. I don't want Thunderbird to check my private mail while I'm at work (or specifically, up until an hour before the end of my workday).

Eg. I'd like to "tell" Thunderbird to check my work account monday to friday from 8am to 5pm, and my private account every workday from 4pm to 8am and every weekend all day. Ideally, clicking on "get new mail" would only fetch mail for the currently unpaused accounts.

I don't want to have to manually pause checking for messages for each account several times a day.

The "check for new messages every ___ minutes" doesn't help.

Disabling notifications isn't a solution - I need the messages (especially work messages) not to be downloaded from the server (or receive notification that there's mail waiting). I'm looking to "disconnect" from work while keeping up to speed with my private communications.

I'm looking for a message filter function that will wait a specified period of time before performing what the rest of the filter does whatever it is tasked to do. For instance, I want to have an incoming message sit in the inbox until it moves to a local folder some time later. This would allow me to see it from a device that can't see local folders (like a mobile phone). I can't find anything in extensions. Any thoughts?

Blocking remote content by default is a very positive security feature. But needing to add each and every email address individually is NOT optimum and wastes a lot of time. We really need a method to globally allow remote content from specified domains. For instance, it would be handy to allow remote content from any/all email from IBM, but I certainly don't want this for gmail.com addresses. This seems like a very simple improvement to code.

I'm trying to set my DNS settings in Firefox Nightly to a custom service. But i am having nothing but problems.

"Firefox Nightly 128.0a1 (Build #2016025199)"

I want to use one of these settings for the secured w/ECS:Malware blocking, DNSSEC Validation, ECS enabled.

My only problem is I'm not sure which format of the address options I should be inputting in the DNS settings in the about:config

Please help.

Secured w/ECS: Malware blocking, DNSSEC Validation, ECS enabled

IPv4 9.9.9.11 149.112.112.11

IPv6 2620:fe::11 2620:fe::fe:11

HTTPS https://dns11.quad9.net/dns-query

TLS tls://dns11.quad9.net

P S. Yes I know I can set a custom DNS address in the connections settings of my android device. And it works most of the time. I however want my own settings in the browser itself.

Thank you in advance

After 10:00 p.m. I cannot get into or use the inter net. I do have an account with you and I thought I could use it at any time to get in to the inter net with security.This started happening about two weeks. How can this problem by solved.

I would like to change my secondary email from 1949.m@sbcglobal.net to yut507@att.net. I am requesting this at this time because I do not know how to contact you to have this done.

I look forward to hearing from you soon and thank you for your time and patience in this matter.

Estella Mills

Good afternoon I have 2 accounts in Thunderbird - a gmail and a Yahoo. Both were running great from the time I set up Thunderbird about 2 weeks ago until yesterday when the gmail account stopped sending and receiving. The Yahoo account is still fine. I have not received a message in Thunderbird in my gmail account since, although I have logged in on the web and confirmed that there are incoming messages in my account.

When I attempt to send a message from the gmail account I receive an error message - "Add Security Exception". If I click "View" nothing happens. If I click "Get Certificate" the section "Unknown Identity" changes to "No Information Available". However, when I cancelled the message I noticed a new error message appeared - "Send Error Message" and when I returned to the main Thunderbird screen I noticed a new tab appeared "Certificate for smtp.gmail.com".

As you can imagine, I seem to be getting nowhere with this and as I am only an intermediate user with computers I don't know where to go next. Subsequently, I sincerely hope that someone out there is able to help me. Any assistance would be very much appreciated.

The following are my Thunderbird settings for the gmail account :- Incoming Server Server type : IMAP Mail Server Server name : imap.gmail.com Port : 993 User name : [myname]@gmail.com Connection security : SSL/TLS Authentication method : OAuth2

Outgoing server Description : Google Mail Server name : smtp.gmail.com Port : 465 Connection security : SSL/TLS Authentication method : OAuth2 User name : [myname]@gmail.com

A copy of the error messages as well as the Certificate are attached.

My wife & I have the same PCs running Windows 10 & Thunderbird 115.11.0 (32bit).

We have a hosted web-site that also supports email, and we each have an email account (eg neddy@goon.com.au & minnie@goon.com.au). I've checked that both our POP server configurations are identical but despite that about once a week minnie@goon.com.au receives a warning to add security exception but neddy doesn't. This started happening two weeks ago after a years error free running.

The host has checked that goon.com.au has a valid SSL certificate, so what could be causing the discrepancy and how do I set about fixing it please?

For the past several years I have been dealing with Thunderbird occasionally freezing on me, with the window losing focus and the titlebar saying (Not Responding).

It appears to happen when TB is downloading email. If the emails are large (as some are) TB stops everything to deal with it. I have looked for where to change any settings to allow for process threading, since that was the promise of Windows waaaaay back in 1990. Not so, apparently with TB. Even if I'm in a separate window composing an email, it freezes. I wrote about this back in 2018...

https://support.mozilla.org/en-US/questions/1233121

I noticed that this only happens when downloading emails from one particular account, which I use for receiving project code error debug reports. The emails are typically around 150k or slightly less. Not so huge that it should take so long to pull down, but the debug info is in many, many nested tables and divs. Is it trying to render them, even though I don't have them open?

In any case, I set that account to no longer collect. Yet, every once in a while, it still collects. Do I need to remove the account from TB altogether? I would like to be able to have this account checked every 15 minutes like my other five email accounts, which don't cause me any heartache, but it's driving me mad, especially when a throng of those emails come in, like 50 at a time, and I am effectively prevented from doing anything in TB for up to five minutes. I suppose I could craft the emails to be smaller (it's my own code that is sending the debug reports) but the info in there is there on purpose.

Is there a setting I can change somewhere to break off the processing for the main window and the compose windows?

Greetings, and thanks, again, for all the nifty Mozilla stuff we've been using since the last century (and donating). Once upon a time, there was an add-on that allowed Thunderbird users to export a simple list containing account info including login names and passwords. I think it quit working around version 57 of TB. Since then, it would appear that several users have inquired about how to do that export, and the general answers are either "use the import/export function" or "you can't do that anymore, 'cause we don't want you to," or something equally off putting. As many users note, the Import/Export function is a shotgun approach, and doesn't really address the matter of getting username and password - let alone a simple list thereof. And it's not recommended for profiles over 2GB, which could be the majority of users, these days. And so, on to the questions: Is there now, in 2024, or will there be, a feature or add-on of Mozilla's Thunderbird that will allow a user to export a simple list of usernames and passwords to a readable file, like CSV or TXT or XLSX or ODT? If so, when? If not, why not? Thanks, again (again).

I'm on Windows 11 Pro 23H2. This is a pristine installation, downloaded from mozilla.org, default settings, no add-ons. - Firefox 126.0.1. - There are no cookies, history or cache to clean, since it's a fresh installation. - Connection settings is set default to "Use system proxy settings", although I've also tried setting it up to "No proxy", then restarting Firefox completely, then trying again with a new domain. No change. - DNS over HTTPS is set default to "Default protection". I've also set it to "Off", then restarting Firefox completely, then trying again with a new domain. No change.

I don't what else to try and I don't know what's wrong with Mozilla Firefox.

Can you help?

See video: https://x.com/jdvivar/status/1798859828393332982

I only wish to sort email only from known vs. unknown domain sources into different folders. Is there a method to filter messages from @AnyDomainName where the domain is NOT found in entries of my address book? Specifically, this method would ignore the Sender Name and only scrutinize the domain.

I was in the middle of generating a long "reply all" to a message and wanted to jump to a new page when it would be printed. I absent-mindedly hit Ctl-Shift-Enter and the entire window disappeared and there was nothing in Drafts! Ctl-V just restores the last thing I added to this very long reply! I had been working on this for 90 minutes, doesn't Thunderbird continually update Drafts while working on a long email?