Форум поддержки Thunderbird

Good morning. I need help with sending emails in Thunderbird. The problem has existed for a couple of days now and is confusing as some emails are sent and others fail. I am receiving mail OK. Details of my setup are :- I am using a HP All-in-one desktop running Windows 11 with Norton 360. My Thunderbird account settings: Server type: IMAP mail server User name: ****@gmail.com Server name: imap.gmail.com Port: 993 Connection Security: SSL/TLS Authentication: OAuth2 Outgoing Server (SMTP): Google Mail – smtp.gmail.com (Default) User name: ****@gmail.com Port: 465 Connection Security: SSL/TLS Authentication: OAuth2

The problem: I only recently set up Thunderbird and at first it seemed to working OK. However, now when I try to send a message, after some time, I the following error message :-

"Send Error Message Sending of the message failed. The message could not be sent because the connection to Outgoing server (SMTP) smtp.gmail.com timed out. Try again."

What is particularly confusing is that some messages are being sent. I have tried several fixes that I found from the Mozilla, Google and Norton web sites but none of the fixes resolved the issue. Any assistance would be very much appreciated.

Regards Mike

PS: I have 2 email accounts set up in Thunderbird. I just tried sending a test message from the Gmail account to the Bigpond account. From the Gmail account it appears to have been sent but in the Bigpond account an error message appeared as follows :-

"Could not connect to the mail server smtp.telstra.com; the connection was refused."

I don't know if this is a related issue or I have another one to resolve.

I've read a few historic suggestions about how to resolve this, but I haven't been comfortable with what solutions were suggested as they didn't seem to comprehensively answer the questions, I'm afraid.

Until this morning's attempts to resolve the "running out of disk space" warnings, I had two mail accounts on Thunderbird - my old Hotmail account and my new personal domain based account. Both accounts had old emails (3/4 years' worth) filed locally on my PC pending my satisfaction that the new mail account was working satisfactorily. To try and resolve the storage issue, I deleted all the locally stored emails from my Hotmail account from within Thunderbird, then deleted the Hotmail account, and restarted both my PC and Thunderbird.

The expected reduction on space occupied by the .thunderbird folder didn't materialise - at all.

How can I get back the space so I can continue working, please?

My phone has been deleting emails from my mozilla account and removing them from my laptop. Although I can still delete from my phone they don't delete from my laptop. This system has been working for years and I've only just noticed the problem. I normally use my phone for this so I have about 3 months worth of emails still on the laptop.

I installed Thunderbird and eventually got it working. I download with IMAP and upload with SMTP. TB did a great job downloading gobs of email from Gmail and converting the labels into folders. In a couple cases, it created folders, but none of the emails with that label were downloaded into the folder. FOr example, there is a folder 'PE' and a subfolder " CD Ads'. Emails are present in both. However, in TB, 'PE' is lighter grey and italicized and empty.

The folder structure is not an exact match to the label structure. For example, in the labels, I have an 'Employment' label with 5 employers underneath it. None of the employers made it into TB.

I have a few other oddities too, but lets start with these. I did end up using a normal password to access the account, as 0Auth2 would not cooperate.

Thanks for you insites!

Cheers --Mark

Hello, I recently installed Ubuntu 24.04 with the version of Thunderbird (115.10.1) supplied with the distribution. I can no longer display mail saved as .eml in a remote folder (sftp). Thunderbird opens, but the mail window is empty. If I ask for the source code, this message appears:

Unable to read file at address view-source:file:///run/user/1000/kio-fuse-ouSeRu/sftp/myuser@myserver/mymessage.eml?type=application/x-message-display.

If I open from CLI I get this message :

JavaScript error: chrome://messenger/content/aboutMessage.js, line 218: NS_ERROR_FILE_ACCESS_DENIED: Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED) [nsIMsgDBHdr.mime2DecodedSubject]

If I open the save file with a file editor I'm able to see the source code.

Could you please help me? Thanks

I had an email account from my university that used gmail in the past but just recently disabled the email and migrated away from it.

However, when I removed that email account from thunderbird and restart the app, the oauth dialogue to authenticate the disabled account each time. It would also keep opening that dialogue every 30 minutes. Any help is appreciated.

I am using a Mac with Big Sur (macOS Monterey, Version 12.7.5), and my email is POP, using Thunderbird Version 115.11.0.The message count of my inbox is wrong. It is two (2) more than it actually is. Right now there are ten (10) messages in my inbox BUT the message count of my inbox says twelve (12). Please correct.

TB won't set up on Yahoo mail. Spent about 3 hours on the phone with one and sometimes two Yahoo techs and giving them total access to my computer so they could set up TB but could not get it working. It was eventually suggested I contact you folks, so here I am. When sending an email, it just keeps running like it's sending but doesn't stop. Eventually displays the following:

Sending of the message failed. Unable to authenticate to Outgoing server (SMTP) smtp.mail.yahoo.com. Please check the password and verify the 'Authentication method' in 'Account Settings | Outgoing server (SMTP)'.

The techs and I went around an endless loop of re-entering PW and checking authentication settings. Any suggestions?

I was using thunderbird. I accidentally hit the sort by star right above the email list. The application crashed closed. When I reopen it, it immediately crash closes. I can't even get an pointer arrow for long enough to exit myself.

On window 10. Thunderbird was up to date.

Tried - restarting computer. Signing out of TB in the crash report box. Can't get into safe mode.

I accidently powered off system (PC with Windows 10) without closing programs, including Thunderbird. After restarting the system and opening Thunderbird, TB crashed. I have tried numerous fixes:

• Installed the latest version of TB (from 78.11.0 to 102.8.0)
• Opening TB in Safe Mode (disabling all add-ons, reset toolbars & controls)
• Uninstall & reinstall TB

All result in the Crash Reporter dialog, with Report Contents. I can supply the report contents. (It wasn't obvious how to attach to this forum post.)

One KB item (https://support.mozilla.org/en-US/questions/1337785) suggested that the issue may have to do with session.json file. Based on the file timestamp, that seems likely. But I don't know how to edit this file to fix the problem.

I also created a new TB profile, with does not crash on startup, but I cannot get email properly configured.

I have hundreds (maybe 1000s) of email stored in TB that I cannot access.

I would greatly appreciate any help!

Hi,

I have a user who sends me an email to one of my email addresses and it always ends up in the Junk folder. I've repeatedly marked his emails as not junk but that doesn't seem to change anything.

Is there anything I can look at that will help me figure out why it happens, and hopefully find a way to fix it.

I'm on Betterbird in case that matters. I looked thru the release notes and there seems to be nothing tagged with the junk filter.

I noticed this in the X-Proofpoint-Spam-Details email headers: mlxlogscore=764 clxscore=1015

This person seems to be the only person that has this information in their headers. Is it added by the junk filter? Or is it something on the sender's side (he uses an icloud.com and a me.com address)?

Thanks,

L

Has anyone seen a message similar to this when trying to attach a document, usually a pdf to an email?

O:\XXXXXXXXXX.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences.

Also, when someone send me an image file, I can't open it directly from the email. I have to download it and then open it. This isn't as big of an issue as the above, but I thought I'd ask it too.

Thank you

Windows 10 Thunderbird 115.10.0

Since yesterday, Thunderbird will not connect to my TalkTalk IMAP mail server unless I switch on a VPN. This is inconvenient. I have no problems accessing my emails through TalkTalk's online mail service, which doesn't happen when the server is down.

115.05 when I started.

I typically open Thunderbird about once a month, download my emails from a hosted website, do some clean up, write some emails, close Thunderbird, and do the same about a month later.

Today I opened Thunderbird, saw that it was downloading around 400 emails in the lower left corner, and waited patiently, as per usual. When "done", however, none of them showed up in the main window. The latest email did not change, was still from around a month ago. When I ask Thunderbird to Get Messages it says there are no new emails to download.

I restarted Thunderbird several times, no change.

I then upgraded to 115.10, hoping this might fix the issue, but it has not.

Since restarting Thunderbird, 2 new emails have come in and are showing correctly, but none of the initial 400 emails "downloaded" today are showing anywhere.

I repaired the Inbox folder (right click > Properties > Repair Folder), no help. I renamed the "Inbox.msf" file and had Thunderbird rebuild it, no help. I renamed the "global-messages-db.sqlite" file and had Thunderbird rebuild it, no help. View Ignored Threads does not help. View > Threads > All is selected. Emails are not in the Trash folder, or any other folder.

All of the initial batch of 400 emails - and the emails I had previously opened - just disappeared.

Opening up the Inbox MBOX file directly, I can see that these 400 emails were never actually downloaded into this file. Not sure what happened.

Opening up my remote email host, I can see that those 400 emails are still there, to the exact point when I last closed Thunderbird.

Asking Thunderbird to download new messages does not download these remote emails.

How do I reset Thunderbird to start the process over and re-download these emails again? Part of TB seems to think it's already downloaded these emails, while another part of TB never actually did.

Does anyone have any idea what to do here?

Somebody thought that it is a GREAT idea to make drag-n-drop cursor a GIANT rectanglular thumbnail of the emails being dragged.

No, this is a horrible idea because that thumbnail covers the target of the drag-and-drop.

Either REVERT this IMMEDIATELY or let us know how to disable and revert to the simple drag-n-drop mouse cursor that does not obstruct the target of the drag.

And in the future AVOID any GUI changes that are not ABSOLUTELY NECESSARY. With these poorly thought through, extremely annoying changes you are only causing damage and aggravation.

I am currently trying to set up extra SMTP servers for additional identities in my e-mail account. I would like to use the Amazon service for this.

However, as soon as I try to send an email with the data provided by AWS, I get an error message:

"Sending of the message failed. The Outgoing server (SMTP) <ses-smtp-server-url> does not support the selected authentication method. Please change the 'Authentication method' in 'Account Settings | Outgoing Server (SMTP)'."

Changing the "Authentication method" did not work either. If I enter the same data in gmail as "Send mail as" (the equivalent to the extra identity of Thunderbird), the connection in the GUI of gmail works without any problems and I can send e-mails via it. So it can't be the data or the configuration of the SES.

I am afraid that Thunderbird does not yet support the newer protocols that SES requires. Does anyone here have any ideas?

Server: <ses-smtp-server-url> Port 587 Connection security: STARTTLS Auth. method: Encrypted password User Name: <username>

Since the latest upgrade to 115.10.1 (64-bit) I have an issue about running Thunderbird.

From a clean Windows 11 start up it is OK but then if I then Exit and then try to run the bird again it does not start.

Digging around I discovered using Task Manager, a number of Thunderbird processes run after I had Exited. See attached.

Any thoughts?

For months I was experiencing the problem of "Thunderbird not responding" occasionally. It was a short duration issue (a few seconds to a minute). I reinstalled Thunderbird several times without success. I read almost every comment available online about this problem and I tried many ideas and recommendations I found without success. Most recently the problem became so serious that it was not a nuisance any longer. It was nearly impossble to work waiting for minutes to open an email or to continue typing while preparing a message and being interrupted by the problem I am describing. I ran Thunderbird in safe mode and determined that none of the add-ons is causing the problem. I turned the firewall OFF and determined that firewall was not causing the problem. I then decided to run Thunderbird in Offline mode and found that the program works normally. Then while in Offline mode I decided to download more messages and the program asked me if I wanted to switch to the Online mode. I said yes. New emails were downloaded and without going back to the Offline mode I was able to work normally without any occurrence of the "Thunderbird not responding" problem. I have been using this workaround for several days now. I download a number of eamails. I try working in Online mode and I cannot do it. I switch to Offline and work fine. I switch back to Online mode and I don't see the problem any longer for the whole day. Do you have any idea as to the origin of my proble? I am running Thunderbird 115.10.2 64 bit on Windows 11. I had the problem originally using Lenovo T490s and more recenlt Lenovo X1 Yoga

Sending of the message failed. An error occurred while sending mail. The mail server responded: <work@email address>: Sender address rejected: not owned by user personal@email address. Please verify that your email address is correct in your account settings and try again.

This message suddenly coming up after a Thunderbird update, and I cannot send messages from my work email because I don't "own" it. How do I fix this?

TIA.

My environment - I am running Thunderbird 115.10.2 (64-bit), and Windows 10. - I have had NO Windows updates for at least two weeks.

The problem - About five days ago, outgoing messages (messages I was trying to send) started taking about 15 to 30 seconds before they were sent successfully.

- Today, I am unable to send messages. I can receive messages.

Actions I have taken 1. I re-installed Thunderbird after using Revo Uninstaller to uninstall it. 2. I contacted my ISP. They checked their settings, and have been unable to detect any error.

Please help!

Kenneth Govias [removed phone# from support forum] (Canada)