Adding religious holidays
Is there any way to add religious holidays and U.S. holidays to the calendar?
Thanks, Ian
Is there any way to add religious holidays and U.S. holidays to the calendar?
Thanks, Ian
(there is no way to help, I've solved it)
I am in the middle of creating a new event. If I click on the "Invite Attendees" button an "Invite Attendees" dialog appears with an email address already loaded in the … (tuilleadh eolais)
I am in the middle of creating a new event. If I click on the "Invite Attendees" button an "Invite Attendees" dialog appears with an email address already loaded in the first line. In my instance, this email address isn't mine! It is an alias on our corporate Zimbra email system that hasn't been used for 15 years, but is nowhere in my Thunderbird v102.15.1 client. It also isn't in any of my Thunderbird accounts. Where can I define this?
Profiles was bad enough, as Thunderbird can never open the zip file (the wording of the alternative method is gobbledegook, and there are no recognisable files if you att… (tuilleadh eolais)
Profiles was bad enough, as Thunderbird can never open the zip file (the wording of the alternative method is gobbledegook, and there are no recognisable files if you attempt to decipher it). At least you can set all your email addresses up manually - you can't physically re-types five years of calendar entries. The infuriating this is that when you start the import, the calendar entries appear before your eyes for up to five seconds and then the program crashes ... again and again and again. I must have been trying this on and off for years now and still nobody has fixed it.
Hi support.
Can Thunderbird support Google family calendar? If yes, how?
Thanks for answer.
KR.
Dusan
Computer crashed. After restoring, Google calendar is not syncing. No error message that I can see. I unsubscribed and resubscribed to no avail. I have no clue what to lo… (tuilleadh eolais)
Computer crashed. After restoring, Google calendar is not syncing. No error message that I can see. I unsubscribed and resubscribed to no avail. I have no clue what to look for and searching here is not helping as all the references to this are years old. Can someone help me figure out why this is happening?
Is there any way to select other than the "home" calendar as standard? Have tried to change order in the calendar setting, but when I accept a meeting invitation it alway… (tuilleadh eolais)
Is there any way to select other than the "home" calendar as standard? Have tried to change order in the calendar setting, but when I accept a meeting invitation it always place the meeting in the home calendar. I would like to select the syncronized Google calendar.
The syncronization with Google calender works perfect when manual enter something.
Best regards /Mike
Hi folks, I am wondering if there is a way to change the behavior of the pop-up reminder window in Calendar. When I have missed reminders (e.g. a task set for today at 8a… (tuilleadh eolais)
Hi folks, I am wondering if there is a way to change the behavior of the pop-up reminder window in Calendar. When I have missed reminders (e.g. a task set for today at 8am and it is now 9am), the task is visible in the reminder window that pops up every time a reminder is active. This is fine. But if there is a past reminder (not resolved), every time I add a new task (or edit a past task) to the calendar, the pop-up reminder window opens and comes to the front. Let me describe the example: I missed (knowingly) a reminder at 8AM. Now, at 9 AM I need to add 3 new tasks to the Calendar. After setting (or copying, editing) each new task, the pop-up reminder window is focused on the front. Can I change this behavior so that the reminder window only pop up when the reminder is due and not in the case a new task is set up or old one edited?
I would like to have a unified calendar that when an event is added to my gmail or outlook calendar it gets copied to the unified calendar. Is that possible? … (tuilleadh eolais)
I would like to have a unified calendar that when an event is added to my gmail or outlook calendar it gets copied to the unified calendar.
Is that possible?
can i shut it off this way I do not gnat encryption and i am using Norton a d i also use ccleaner and glary do… (tuilleadh eolais)
can i shut it off this way I do not gnat encryption and i am using Norton a d i also use ccleaner and glary does this have anything to do with it
Thunderbird's Calendar displays time for events from Google's calendar (probably other network calendars too) incorrectly. For example, i create an event with "New Event… (tuilleadh eolais)
Thunderbird's Calendar displays time for events from Google's calendar (probably other network calendars too) incorrectly. For example, i create an event with "New Event", select "Calendar: <my gmail account>" and set "Start: 15:00", "End: 16:00", then "Save and Close". Thunderbird Calendar displays it as from 16:00 to 17:00. "Use system timezone" is selected in Calendar settings. When i open "Edit" dialog for the event, time in "Start:" and "End:" fields is also incorrect (16:00 and 17:00 respectively). However, when i go to "Options" and click "Show Timezones" it becomes correct (15:00 and 16:00). Disabling "Show Timezones" leads back to incorrect time. Web page and other applications display time for the same event correctly (as i set it during creation). The same error for events created not by Thunderbird but on web page or other applications. Thunderbird 115.9.0.
New version of TB and again event colors are gone. I used the patch Todd gave me in the previous topic with the same name, archived. It worked after again half an hour … (tuilleadh eolais)
New version of TB and again event colors are gone.
I used the patch Todd gave me in the previous topic with the same name, archived. It worked after again half an hour of useless work.
When will TB include this in standard coding?
Something changed at some point in time with the calendar file. When I started using Thunderbird I was able to set up entries in the calendar file and give them names and… (tuilleadh eolais)
Something changed at some point in time with the calendar file. When I started using Thunderbird I was able to set up entries in the calendar file and give them names and an associated colour. I can't seem to do that any longer. Eg. I set up entries for Birthdays which showed on the calendar as purple and Anniversaries where green. I can't do that anymore. Was that ability removed at some time?
Another situation I came across was importing .ics files. The method changed and now you have to open a file. What it does is ask where you want to put the contents, ie as an Event or a Task. I tell it where I want it put . But when I check the entry it shows as the .ics file and not as an Event or Task. Then I have a terrible time trying to remove it. Nothing happens when I tell the program that the Event/Task is completed. HELP!
I remember being able to search all calendar entries for word(s) in an event title. Is that still possible? If so, how? I can't find it under tools or the 'Search' functi… (tuilleadh eolais)
I remember being able to search all calendar entries for word(s) in an event title. Is that still possible? If so, how? I can't find it under tools or the 'Search' function. TIA
Steps: 1. Setup Thunderbird with a CalDAV calendar (in my case I am using Baikal as the back-end). 2. Add (and modify) a bunch of tasks and calendar events to that CalDAV… (tuilleadh eolais)
Steps: 1. Setup Thunderbird with a CalDAV calendar (in my case I am using Baikal as the back-end). 2. Add (and modify) a bunch of tasks and calendar events to that CalDAV calendar, using Thunderbird and any external CalDAV tool (in my case I am using Tasks.org on my phone).
Expected behavior: The tasks and calendar events would seemlessly sync between Thunderbird and Tasks.org.
Bug:
Software versions and system information:
``` System:
Kernel: 6.5.13-7-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1 clocksource: tsc avail: hpet,acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-6.5-x86_64 root=UUID=2b7072e2-76a6-42f5-83c2-2ab80366d449 rw cryptdevice=UUID=0547c112-bbd6-43c9-8e23-ad3207afedf1:luks-0547c112-bbd6-43c9-8e23-ad3207afedf1 root=/dev/mapper/luks-0547c112-bbd6-43c9-8e23-ad3207afedf1 resume=/dev/mapper/luks-b3063d16-3277-4725-89a2-14f079d36d79 udev.log_priority=3 amd_pstate.shared_mem=1 amd_pstate=passive splash Desktop: GNOME v: 45.4 tk: GTK v: 3.24.41 wm: gnome-shell tools: gsd-screensaver-proxy dm: GDM v: 45.0.1 Distro: Manjaro base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 21D4CTO1WW v: ThinkPad Z16 Gen 1 serial: <superuser required> Chassis: type: 10 serial: <superuser required> Mobo: LENOVO model: 21D4CTO1WW serial: <superuser required> part-nu: LENOVO_MT_21D4_BU_Think_FM_ThinkPad Z16 Gen 1 uuid: <superuser required> UEFI: LENOVO v: N3GET64W (1.64 ) date: 11/01/2023
Battery:
ID-1: BAT0 charge: 23.1 Wh (36.8%) condition: 62.7/72.0 Wh (87.1%) power: 9.1 W volts: 15.2 min: 15.5 model: SMP 5B10W51887 type: Li-poly serial: <filter> status: discharging cycles: 388
Memory:
System RAM: total: 16 GiB available: 14.9 GiB used: 10.86 GiB (72.9%) Message: For most reliable report, use superuser + dmidecode. Array-1: capacity: 64 GiB slots: 4 modules: 4 EC: None max-module-size: 16 GiB note: est. Device-1: Channel-A DIMM 0 type: LPDDR5 detail: synchronous unbuffered (unregistered) size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Hynix part-no: H9JCNNNCP3MLYR-N6E serial: N/A Device-2: Channel-B DIMM 0 type: LPDDR5 detail: synchronous unbuffered (unregistered) size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Hynix part-no: H9JCNNNCP3MLYR-N6E serial: N/A Device-3: Channel-C DIMM 0 type: LPDDR5 detail: synchronous unbuffered (unregistered) size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Hynix part-no: H9JCNNNCP3MLYR-N6E serial: N/A Device-4: Channel-D DIMM 0 type: LPDDR5 detail: synchronous unbuffered (unregistered) size: 4 GiB speed: 6400 MT/s volts: curr: 0.5 min: 0.5 max: 0.5 width (bits): data: 32 total: 32 manufacturer: Hynix part-no: H9JCNNNCP3MLYR-N6E serial: N/A
CPU:
Info: model: AMD Ryzen 5 PRO 6650H with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3+ gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x44 (68) stepping: 1 microcode: 0xA404102 Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 16 MiB desc: 1x16 MiB Speed (MHz): avg: 1180 high: 1423 min/max: 400/4564 boost: enabled scaling: driver: amd-pstate governor: schedutil cores: 1: 1100 2: 1423 3: 1100 4: 1100 5: 1418 6: 1100 7: 1100 8: 1100 9: 1421 10: 1100 11: 1100 12: 1100 bogomips: 79090 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Vulnerable: Safe RET, no microcode Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Rembrandt [Radeon 680M] vendor: Lenovo driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, DP-7 bus-ID: 64:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 37.0 C Device-2: Chicony Integrated Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4:2 chip-ID: 04f2:b78b class-ID: fe01 serial: <filter> Device-3: Chicony Integrated IR Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-1:2 chip-ID: 04f2:b78c class-ID: 0e02 serial: <filter> Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4 compositor: gnome-shell driver: X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: 0 Monitor-1: eDP-1 model: Samsung 0x4165 built: 2021 res: 3840x2400 dpi: 284 gamma: 1.2 size: 344x215mm (13.54x8.46") diag: 406mm (16") ratio: 16:10 modes: max: 3840x2400 min: 640x480 API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi device: 1 drv: swrast surfaceless: drv: radeonsi wayland: drv: radeonsi x11: drv: radeonsi inactive: gbm API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.2-manjaro1.1 glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi rembrandt LLVM 16.0.6 DRM 3.54 6.5.13-7-MANJARO) device-ID: 1002:1681 memory: 500 MiB unified: no display-ID: :0.0
Audio:
Device-1: AMD Rembrandt Radeon High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 64:00.1 chip-ID: 1002:1640 class-ID: 0403 Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 64:00.5 chip-ID: 1022:15e2 class-ID: 0480 Device-3: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 64:00.6 chip-ID: 1022:15e3 class-ID: 0403 API: ALSA v: k6.5.13-7-MANJARO status: kernel-api tools: N/A Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter vendor: Lenovo driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 14c3:0616 class-ID: 0280 IF: wlp1s0 state: up mac: <filter> IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter> IP v6: <filter> type: noprefixroute scope: link Info: services: NetworkManager, sshd, systemd-timesyncd, wpa_supplicant WAN IP: <filter>
Bluetooth:
Device-1: Foxconn / Hon Hai Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 0489:e0d9 class-ID: e001 serial: <filter> Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found. Device-1: luks-0547c112-bbd6-43c9-8e23-ad3207afedf1 maj-min: 254:0 type: LUKS dm: dm-0 size: 937.18 GiB Components: p-1: nvme0n1p2 maj-min: 259:2 size: 937.18 GiB Device-2: luks-b3063d16-3277-4725-89a2-14f079d36d79 maj-min: 254:1 type: LUKS dm: dm-1 size: 16.39 GiB Components: p-1: nvme0n1p3 maj-min: 259:3 size: 16.39 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 524.56 GiB (55.0%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL21T0HCLR-00BL7 size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: EL3QGXA7 temp: 38.9 C scheme: GPT Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 937.18 GiB size: 921.39 GiB (98.32%) used: 522.14 GiB (56.7%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0 mapped: luks-0547c112-bbd6-43c9-8e23-ad3207afedf1 label: N/A uuid: 2b7072e2-76a6-42f5-83c2-2ab80366d449 ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 47.8 MiB (16.0%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: NO_LABEL uuid: FEEC-51B2
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes compressor: zstd max-pool: 20% ID-1: swap-1 type: partition size: 16.39 GiB used: 2.37 GiB (14.5%) priority: -2 dev: /dev/dm-1 maj-min: 254:1 mapped: luks-b3063d16-3277-4725-89a2-14f079d36d79 label: swap uuid: f204fe9e-1387-44d5-b256-f0e540591fd7
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 1-4:2 info: Chicony Integrated Camera type: video driver: uvcvideo interfaces: 3 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b78b class-ID: fe01 serial: <filter> Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 3 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 3-2:2 info: Foxconn / Hon Hai Wireless_Device type: bluetooth driver: btusb interfaces: 3 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 0489:e0d9 class-ID: e001 serial: <filter> Hub-4: 3-3:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 05e3:0610 class-ID: 0900 Device-1: 3-3.4:4 info: Shenzhen Goodix USB2.0 MISC type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA chip-ID: 27c6:658c class-ID: ef00 serial: <filter> Hub-5: 4-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-6: 5-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Device-1: 5-1:2 info: Chicony Integrated IR Camera type: video driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b78c class-ID: 0e02 serial: <filter> Hub-7: 6-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0 speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-8: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-9: 8-0:1 info: super-speed hub ports: 1 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900 Hub-10: 9-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900 Hub-11: 10-0:1 info: super-speed hub ports: 1 rev: 3.1 speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A gpu: amdgpu temp: 37.0 C Fan Speeds (rpm): fan-1: 0 fan-2: 0
Info:
Processes: 427 Power: uptime: 2d 15h 8m states: freeze,mem,disk suspend: s2idle wakeups: 14 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 5.95 GiB services: gsd-power, power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical tool: systemctl Packages: 1280 pm: pacman pkgs: 1133 libs: 342 tools: gnome-software,pamac pm: flatpak pkgs: 147 Compilers: clang: 16.0.6 gcc: 13.2.1 Shell: sh default: Zsh v: 5.9 running-in: kgx inxi: 3.3.33
```
When typing up event comments, in Calendar, the spellchecker highlights incorrect spellings but does not offer alternatives when the word is right-clicked, as the email c… (tuilleadh eolais)
When typing up event comments, in Calendar, the spellchecker highlights incorrect spellings but does not offer alternatives when the word is right-clicked, as the email composer does. This has become rather annoying and one other user asked the same question in November 2023, but never got a response. That particular thread has been archived, so I can't add to it. Can the developers please look into this?
Hi lads, I used TB for many years but only now started using it in office. I have a problem with the calendar function however which I have to use now. I'd like to have … (tuilleadh eolais)
Hi lads,
I used TB for many years but only now started using it in office. I have a problem with the calendar function however which I have to use now. I'd like to have an audio alert and/or window pop-up forcing interaction for any event in my calendar, let's say 15 min ahead. I tend to overlook the small notification pop-ups in the bottom right corner of the screen since they also vanish automatically after a few seconds.
I can get these small bottom right corner pop-ups to appear for any event by using the global notification preferences in the Edit Calender options. However, I can not globally activate an audio alert or a window requiring interaction for upcoming events. I can just activate a reminder manually for each and every event, which is a lot of work, naturally. So, is there a way to activate a reminder (not a notification, which is the bottom right pop up I assume) globally for any event in a calendar?
Can also be done by an add-on or by manually changing source files, if anyone has suggestions in this direction.
Thanks in advance, trashmaster
Hi, I would like to know if it is possible to have a calendar feature that's like Apple's Calendar and like Google's Calendar where I can drop files into the date I crea… (tuilleadh eolais)
Hi,
I would like to know if it is possible to have a calendar feature that's like Apple's Calendar and like Google's Calendar where I can drop files into the date I create or will edit. I would like it to also have an unlimited attachments list where I can drop as many as I can. Also if I can drop off files or have the destination open on my drive/pc?
Best,
Kevin
If I go into Config Editor and set PixelsPerPx and set it to 1.0, the "Chrome" (Icon size out of the calendar area) becomes tiny in my current resolution of 3840x2860, wh… (tuilleadh eolais)
If I go into Config Editor and set PixelsPerPx and set it to 1.0, the "Chrome" (Icon size out of the calendar area) becomes tiny in my current resolution of 3840x2860, which I know seems "oddball" with screen magnfication at the recommended 300%.
"new meeting" is small enough to be unreadable. Seems to not honor the "View|Font Size" increases that the rest ("non-chrome") of the layout does.
Also, sometimes the needed controls are not visible (OK/Cancel/Save/etc.) when I do increase PixelsPerPx to say 1.2. Tbird ver 115.9 supernova; Windows 11
Is there way to display events and tasks together in the Today Pane?
Thanks, James