Thunderbird-Hilfeforum

When I'm searching Community Discussions, it would help a lot to be able to sort the discussions by date or at least see when a discussion was started without having to open each discussion individually. Is there a way to do this? The answers in older discussions, pertaining to older versions of Thunderbird/Firefox, may no longer apply and it is frustrating to try and find pertinent discussions when you have to open and close each discussion looking for answers.

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

I have 4 accounts with different names but all with the same domain name (name1@samedomain.com, name2@samedomain.com ...). The first one set up perfectly and works. The 2nd and the 3rd can't retrieve mail from the server (didn't try the 4th yet). The SSL ports are the same for all. The passwords happen to be the same for all. (I haven't tried changing the 2nd and 3rd passwords as that seems unlikely to be the problem.) When initially setting up the 2nd or the 3rd I get a "Sending of password for user name2@samedomain.com did not succeed. Mail server pop.yyy.zzz responded: [AUTH Authentification failed." I've checked the passwords on both the client and the server ends multiple times and they are the same. Then, of course, periodically I get a pop-up with "Login to server pop.xxx.yyy with username name2@samedomain.com failed. When I go to the Account Settings screen with the 3 accounts and click on each Server Settings one after another, the only thing that changes is the User Name, yet the first account receives mail and the other 2 don't so everything is correctly set up. As an aside, I CAN SEND emails from the 2nd and 3rd accounts but can only RECEIVE and SEND from the 1st. Any help appreciated.

I recently moved to a new Windows machine and can not send mail from either hotmail or gmail accounts. I am able to send and receive from my account at outlook.office.com, but hotmail uses outlook.office365.com as the mail server.

Thunderbird Version: 115.10.0 Windows 11 Version: 23H2

The message I receive when trying to send is: Sending of the message failed peer's certificate has an invalid signature the configuration related to smtp.gmail.com must be corrected (also for smtp.office365.com)

I did try all of the fixes advised here, as the error message certainly matched what I was seeing: https://support.mozilla.org/en-US/questions/1295861 so my settings in TB are currently: security.tls.version.min = 1 security.tls.version.enable-deprecated = true

The final suggestion in the above thread was to move back to Thunderbird version 68.11.0, which I will try if nothing comes of this thread by the weekend.

I have had message filters set up for a long time. Recently I tried to make some changes (adding one filter, deleting others, changing the response). I find that if I close Thunderbird and reopen it, all my changes are gone! How can I get the filter changes to stick?

TB no longer will start. It just hangs and when I go to it on my Mac I see a spinning disk. That never changes and eventually, after hours, I must force quit and report it to Apple. I receive no messages or error codes.

Ubuntu 22.04, TB 115.10.0 (64-bit). A system update occurred recently, and TB was in the list to upgrade. Now, TB transacts email & such w/o problem. However, when I use the window exit ('X' upper right corner) or the File ->Quit choice, a status bar shows "Clearing Trash" or the like, and remains on the desktop. Eventually a system message appears that TB is not responding (wait or force quit). Nothing happens until force quit is used.

Same behavior screen is seen if I try to use the TB troubleshooting menu option.

Any suggestions how to diagnose this? Thx.

when I try to send an email you ask for a pass word for jojack@dslextreme which I havent had for years

2

2

Cox.net is transitioning from in-house e-mail to e-mail handled by Yahoo.com. Our cox.net addresses are supposed to (and apparently have) transitioned so that they still work, but are processed through pop.mail.yahoo.com.

It is my turn to be transitioned and I have been successful in doing so to the extent that I can send and receive using my address(es) ...@cox.net through Yahoo web mail and on my Samsung phone. I have not, however, been successful in either sending or receiving mail using Thunderbird on my desktop.

I have been successfully using Thunderbird with POP settings for years with four different cox.net addresses. [I'm currently just trying to get two of them working -- unsuccessfully.]

I am using Windows 10 on a Dell desktop. I am using Thunderbird 115.9.0 (32 bit). I have reset the POP and SMTP settings as directed by Yahoo. One of the errors I receive is: "Error with Account .... Sending of password for ...@cox.net did not succeed. Mail server pop.mail.yahoo.com responded (SYS/TEMP) Server Error - Please try again later." It then asks me to retry or enter a new password. I have checked the passwords saved by Thunderbird and they are correct.

I suspect, that with all the Cox accounts being newly routed through Yahoo servers that I am not the only Thunderbird user experiencing this problem. Does anyone have any suggestions? Is it likely to help if I uninstall and reinstall Thunderbird? Would I loose all my mail, etc. if I did that? [I did the delete and add account in my phone and that was successful, but I wasn't concerned about losing mail there as it is all on my desktop.]

Thanks in advance. billb1111

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

I am running Thunderbird 115.9.0 on Lubuntu 23.10. I have 4 IMAP accounts I use. The folder and file is not shared and I am the only account with access to the directory.

I use emoji as tags for messages, and have a large number of filter rules defined, nearly all of them Tag a message and set the Junk Status to `Not Junk`. These rules are all set to execute `Manually` or on `Getting New Mail`.

If I select a given inbox folder for a mailbox and select `Tools` > `Run Filters on Folder`, all of the messages are properly tagged, however, after some time (10m?, On new mail receipt?) at least one of my mailboxes will lose all of the tags that were previously set for messages. Manually running the filters will restore the tags, until they disappear again some time later.

I've not seen anything in the Browser Console log (but perhaps I'm not using the right term?) Is there any way I can diagnose or fix this issue? Thanks!

There are two "bad email" files in Thunderbird: JUNK and SPAM. I'm still not clear on the difference.

For JUNK mail, TB gives us the option to select "NOT JUNK". Good.

But for SPAM, I cannot find the option "NOT SPAM"

1) Why are there separate SPAM and JUNK directories? And why are they managed differently? This seems terribly non-intuitive and inconsistent and just strange.

2) How can I train SPAM filter to not flag good email from trusted senders? For instance, I get email from my wife many times a day for many years. Today, TB put her email into SPAM. Isn't there a simple command to "white list" a sender's email address?

Goodmorning All in MOZILLA Support.

i was writing the same help message few days back but not received a reply and for this i write again.

I'm using on my Apple MacBookPro Thunderbird Thunderbird 78.14.0 (64 bit) and i'm having problem for the setting of my new company email that, as said in the subject of this email, is in office365 outlook.

Cause i need to store all the communications interesting my activity even after my consulting will expire and this for obvious question of confidentiality, i ask You All gently an help in manner to resolve the problem and finalize the setting on my laptop.

Thank You All so much in advance to have care of my humble request.

Vincenzo

Using TB v91.5.1 on Windows 10 x-64. I have several mail accounts, one of which is for a hotmail.com address. This has been working fine for years, but over the past couple of days, I don't seem to be able to send emails form this account. I can receive them fine, but when I try to send, I get the small pop-up telling me it's sending the message, and the progress bar is at 100%, but it doesn't send the message, it just sits there.

I looked in the error console, but nothing was added when I tried sending.

You can see my server settings for the account in the attached image.

Any ideas? Please let me know if there is any other info you need.

Thanks

Information on how to add the Google 'Tasks' into Thunderbird Calendar: I have a gmail imap account using OAuth2 as Authentication Method.

File > New > Calendar, select 'Google Calendar' >  click on 'Next' choose or enter: gmail email address   > click on 'Find Calendars' Select 'My Tasks' and click on 'Subscribe'

You may be asked to enter password as per Oauth2 Authentication.

See image. It shows the selection available when you follow instructions. It shows where 'My Tasks' is located in the Calendar list. I selected 'My Tasks' and then clicked on 'Task'. Create the Task and save. Task is shown in Thunderbird and on the right side you can see the Task is displayed via the webmail access using a browser.

In a world where respondent's often draft messages about a new subject by lazily replying to messages on an old subject, does anyone find Threading helpful? Why is it now the default.

After View/Sort by/Unthreaded then propagating that by "apply current view to all folders." All folders do in fact sort by unthreaded. But if I create a new subfolder it defaults to sort by threaded. Please, is there anyway to entirely disable Threading?