Firefox Community Forum

Sorry to have this same issue again, knowing full well it can happen after finding this some years ago (https://support.mozilla.org/en-US/questions/1319823), I tried to carefully connect two older PC devices back to firefox sync, however on one I managed to enable sync before disconnecting my profile (it seemed as if reconnecting sync temporarily was the only way to disconnect a profile from firefox's UI - I should have been more careful and removed the profile from the filesystem level): at which point I polluted the sync server.

I've noticed that `about:sync` has an option under bookmarks/engine actions 'wipe bookmarks', which sounds exactly what I need, and if I watch what happens once pressed it does the right thing and repopulates the sever with the 'correct' PC's bookmark set (when run from that PC), however it also says 'other devices will act like a reset', which i'm finding NOT to be the case: eventually one of my other device repollutes the server with bad bookmarks which propogate.

I'm thinking the culprits are my phones, If I wipe and do a sync on a phone, my phone's bookmarks stay polluted. If i'm right about that, I think my question is: can I wipe my profile (or preferably only my bookmarks) from my phones' Firefox without having to entirely uninstall/reinstall (or do you have any other advice for not re-polluting the server from some already-polluted device's bookmarks?

thanks in advance

Firefox stopped working with my VPN on when I updated my OS to Sonoma, yesterday. I use PIA for my VPN.

I have done the following, so far, restarting my system several times between trying these things:

Checked that internet connection and modem are fine. All pages load in Safari, with VPN running, but I prefer Firefox.

Checked the Network settings for my Mac. Ensured that No Proxy was selected.

Cleared my Firefox cookies, cache and history.

Tried running in troubleshooting mode, turning off all extensions.

Tried turning off Advanced Tracking Protection, which I usually run on Custom.

Refreshed Firefox.

Finally, I turned off my VPN and, viola, all sites work. Turned it back on, and can’t navigate, again. For instance, I tried to open YouTube, and got a blank screen. Turned off VPN, and got to main YouTube page. Turned the VPN on and tried to log in…nope. Turned it off and logged in. Turned it back on and tried to open a video….nope. Turned it off and opened the video…etc., etc..

I very much wish to continue using both Firefox and my VPN. Can you suggest a course of action? Thank you for any advice you can give!!

Since updating Firefox from a previous version, the browser no longer displays any Unicode emoji characters. Where an emoji would normally be rendered (👁️), the browser instead displays empty space. Websites such as twitter and discord, which use their own artwork for emoji, are unaffected. This has negatively affected my browsing experience.

For illustrative purposes, I will add a series of emoji and include a screenshot of how they are displayed: (😀🙁😡💀). Other characters still display correctly: (β❖♞䷲⎈𐘢𓀺இ). My computer otherwise displays emoji correctly. The issue persists after disabling extensions, and has persisted between computer restarts.

I am using Firefox version 147.0.4 (aarch64) on a Macbook Air running macOS Sequoia 15.5.

My elderly mother has twice (in the last month alone!) been scammed by selecting the first thing that comes along in a Google search. I realize this is simply never going to change, and I need to take steps to prevent her from ever seeing any sponsored results of any kind, or any kind of address bar autocomplete suggestion.

I have taken several dozen hours of my personal time this past month to repair the damage from her first scam experience (that I know about!), and today's incident made me realize that I have to do much more customization of her browser than I previously imagined. When I told her to never fully trust a Google search, her reply was "but I used Firefox!", and that told me everything I needed to know. It simply cannot be left to her understanding of the internet.

The intended setup is an iPad and a Win11 laptop. I would like to set up Firefox so that the address bar is nothing but an address bar without any kind of autocomplete at all. Is this even possible?

Also, I obviously can't filter every scam known to man, but I would like to specifically block the kind of pop-ups and ads that scammers use. What is a good strategy for this specific purpose? I don't care about legitimate marketing ads, even though they're annoying to me personally.

Hello,

I have tried to download the newest VDH Companion App (via the link on the github.com webpage) Seven (yes, 7) times and every time the download Fails or I get "Zero bytes". I tried to contact "Support" but there is only a Support Forum and nobody else has posted this as an issue that I was able to find when I searched. So no support is offered. The website suggests that I create an account to be able to post a new issue. However, Every time I have tried to set up a github.com account, I am Unable to do so. The page to set up an account either doesn't load OR if it loads, I can not add any information to it. I am a VDH Registered User and until this morning, the current VDH app I am using, version 8.2.1.1 was working just fine. But now when I try to use it, it says that my VDH Companion App needs to be updated. But I can not even download it to update it. I am running the current version of FF, 123.0.1 on an iMac with Sonoma OS 14.4. We used to be able to email Mig but not anymore. The github.com support page is unwieldy at best and I see that numerous requests for help or support have not been answered or even acknowledged. I am a paid Registered user with a license, but that doesn't seem to matter. I, like many others from what I read online, count on using this app almost every day and I would think that the mechanism for updates should be working correctly. The update files I tried to download came across at crazy low speeds, like 20.1 to 40.5 Kbps! I spent over an hour with Tech Support for HughesNet and much to my chagrin, No Other Websites had any issues with download speed. It was only happening on the github.com website and this one file update. Sorry if TMI but I am just trying to thorough.

On certain websites I am getting scrambled text, mostly in headings and titles, not so much in body text. I have followed several tips from other posts like mine, i.e., installed Open Sans font, but that did not do it. I turned off hardware acceleration, and cleared the cache. The only thing that did work was to start Firefox in troubleshooting mode. I only have two add-ons running, Short URL and Dashlane, I doubt they're responsible for this. Any other ideas?

I have an iMac with Sonoma 14.3.1 with Firefox 115.9.1 esr . It is for personal use, not for a business. I just learned that there is another Firefox version (124.0.2) which is not esr....

Which version should I use and why?

If I should use the "normal" version, how do I replace the esr version with the "normal" one ?

Thanks.

Firefox 126.0.1 displays a very long name of a container completely in the URL bar.

Firefox 127.0 truncates container names

AWS long account and role names make keeping the long name very convenient (works with the 'AWS SSO Containers' Add-On

I have a M2 Max Pro MAC. I have read other posts about this and people suggest starting in safe mode doen that and it still happens. Removing all pluggins and restarting doen that and it still happens. IT doenst happem on any otehr browser.... help please?

Hi there - Every website seems to come up in English, ie Firefox seems to be translating other languages automatically. (My version is Firefox for Mac 123.01 64-bit.) I am wondering how I can prevent automatic translation of websites. I have had a look in preferences etc, but I do not see anything there to prevent automatic translation. Any help gratefully received! Many thanks :-)

I love Firefox for Mac, but, on iPad and iPhone, it's impossible to use extensions such as Winger to save tabs. Too many times, I've lost 100 to 200 tabs at once, and so I switched back on iPad and iPhone to Safari. I never had a problem with Safari's built-in window-tab saver on iPad and iPhone but lost thousands of tabs on Mac, hence my move to Firefox on Mac.

On Firefox on Mac, when I click on Firefox View, I can view tabs from other devices, but there's no way to copy multiple tab links at once (you have to go one by one). If I ever were to shift back to Firefox for iPad and iPhone, does anyone know of a way to easily save 100 to 200 tabs from these devices?

I would rather use Firefox because I can't stand how Safari opens links from outside Safari, forcing the use of some new default window over the named window I already have open. It's so much work to micro-manage this browser.

Thank you kindly and enjoy a super day!

Hello- Wondering how to turn off the "skip to main content" that continually pops-up on some web sites. This is a problem on a single Firefox installation and I cannot figure out which setting this could be.

Thanks in advance! -BD

I have been using 1Password 7 to manage my login credentials. It includes a Firefox extension to fill in account names and passwords in login alerts and pages.

Firefox 147.0.1 (macOS aarch64) in January 2026 has broken 1Password 7's ability to fill in account names and passwords.

To reproduce: 1. Install 1Password 7 Version 7.9.11 (70911000) and its extension version 4.7.5.90 in Firefox 147.0.1 on macOS. 2. Visit a URL for which 1Password 7 has login credentials. 3. Click on the toolbar icon for 1Password 7. A 1Password 7 dialogue box pops down from the icon, containing the username and password for that URL. 4. Click the Autofill button in that dialogue box.

Observed behaviour: 1. Username and Password fields remain blank.

Expected behaviour: 1. Username and Password from 1Password 7 appear in the Username and Password fields.

For approximately the last three months, there was a partial failure similar to this. 1. 1Password 7 popdown dialogue moves from the toolbar icon to the Firefox tab for that URL. 2. Username and Password fields remain blank. 3. Workaround: click in the username field, then tab 2-4 times to further UI objects in the login credentials form. Then click the 1Password toolbar icon, then click the Autofill button in the popdown dialogue. Then, the Username and Password from 1Password 7 appear in the Username and Password fields.

The expected behaviour occurs for the same URLs in Safari.

Thus I suspect that Firefox has somehow changed its behaviour in the last few months to cause this regression. I have not changed the 1Password software versions in this time, because I am intentionally using a previous version of 1Password.

I am looking for a fix or workaround which works with my current 1Password software version. I am not interested in a solution which requires me to upgrade to the current version of 1Password. (The current version of 1Password imposes a feature which I am resisting.) I realise that this reduces the chance that I can persuade the Firefox team to find and correct this regression.

Hello friends,

As the title of the subject entails, I am trying to disable Firefox's new translation tool, becasue I'm using a 3rd party extension.

I tried to follow the solution on the following support thread ( [https://support.mozilla.org/en-US/que.../1434741#question-reply] ), but it didn't work for me, and I'm still seeing the new translate button.

Is there another way to fix this?

I'm using Firefox 129.0.1 (64bit) for MacOS.

Using Firevox 142.0.1 on a MacBook Air. I always have "Always ask you where to save files" checked in Preferences, but lately it sometimes fails to ask me. For example, if I try to download a file from Google Drive. Is anyone else having this problem? Is there something I can do about it?

Is there a way to create a new keyboard shortcut to copy current tab URL?

I've been using Arc to try some of their features, and what I miss the most is the hability to copy current URL to share without touching the mouse.