I-Thunderbird Isithangami Sokwesekwa

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

Hi, I am running Thunderbird v. 115.9.0 on Windows 10 on my desktop. I have been forced by Rogers in Canada to migrate my internet service from their legacy internet service to Rogers Ignite with its Ignite (Comcast) gateway. My email accounts were supposed to be migrated automatically, but, for reasons unknown, were not, and a tech support representative had to migrate them from the old legacy service to Ignite. After that was done, I opened Thunderbird, and was asked to authenticate my 2 Rogers/Yahoo email accounts, one of which is my primary account, the other a secondary account. I was asked to authenticate the secondary account first, which went well. I then clicked on my primary account in the left-hand pane and was again asked to authenticate, but the dialogue box showed it was for the secondary account. Thinking that this secondary account authentication was just being repeated for no particular reason, and not thinking that the email address in the authentication request box could be changed, I clicked Agree. My primary account is now showing the exact same emails as are listed in the secondary account, and I'm extremely concerned that I will not be able to recover all of the thousands of emails in my primary account, many of which are business-related. When I log into my primary account on the Rogers/Yahoo mail website, the emails in the primary account are still showing, so I know they are still on the Rogers IMAP server. However, I really want to continue to use my primary account on Thunderbird. I'm not sure if I should delete the primary account and recreate it - the Rogers support tech said that deleting the account may result in an issue where my current password for a re-created primary account may not be recognized, so I'm leaving things as they are until I hear back. It the advice is to not delete and recreate the account, what steps can I take to recover the emails on my primary account in Thunderbird. Thanks in advance for any help and advice that can be provided. LES.

I had a functioning thunderbird, but do to my host provider I had to change some of the configuration (had (owl) suffix). This left 2 profiles. The new profile wouldn't work until I deleted the original. I did a save so I have all the files, now which ones need to be restored. ( a full file backup prior to adding new profile so all org profile files are available)

A profile directory displays all of the folders, 2 files for each folder a MSF and an MBX. Some also have a file type of File.

Which has to be copied, will the folders be created with the copy or do I need to create them in thunderbird first ?

I am trying to import mails from Microsoft Outlook 2013 into Mozilla Thunderbird 102.3.2 (64-bit), but I get the error: No Profile found, see the attachment. I have set Microsoft Outlook as my Default mail app in Windows 10, my OS. But it didn't help. H.C. Enevoldsen hc@pushkin.dk

It's not true! Clicking on the close thunderbird button in the error message does nothing, I've uninstalled, reinstalled rebooted. I've had this laptop 3 days, do I need to To go back to factory settings on this laptop.

I want to move Thunderbird local folders to an external drive (Seagate). I am working on a desktop computer with Windows 10. Where are the Thunderbird local folders? The files don't display anywhere in Windows explorer. I am able to transfer all other files such as jpg. and pdf. files from the desk top computer to the external drive by dragging and dropping, but I can't locate the Thunderbird local email files so as to be able to drag and drop.

Since I have problems with version 115 (ImportExportTools NG does not work in this version) I am forced to restore version 102. Unfortunately I can't find a way to download this version anymore. A download possibility for older versions would be very helpful. Thanks a lot

I am looking for a new email service provider, and Proton mail seems to always be near the top of the list. Searching Thunderbird support yields only help from a year or more ago. How well do proton and Thunderbird mesh currently?

Hello I noticed that I still use thunderbird 32bit, if I download and install over it thunderbird 64bit will it keep everything from the 32bit version? (accounts, offline folders etc)

Hi,

I've recently upgraded to the 91 version and the order of the account folders have changed. i.e. the email folders and the off-line personal folders are no longer in their previous order. How would I change the order.

I tried moving them, but they return to their original position after every reboot of thunderbird 91.

Additionally, is there any good docs about folder paths to learn more about archiving or default settings.

Thanks,

I recently installed version 102 and I am having an issue with password manager. I need to enter my password each time I want to check my email. If I check the box for password manager to save the password, I get the incorrect password error message. If I enter my password but do not check the save password box, I can retrieve my email. If I leave Thunderbird open I can retrieve email without reentering my password. If I exit Thunderbird, restart and retrieve my email, it asks me to enter my password again. I looked in security settings - My saved password box is empty and I can not add any accounts to it. I have tried deleting key3.db, cert8.db, logins.json to no avail. Any ideas?

I've been happily using Thunderbird for email for many years. Recently, the gmail OAuth2 requirement has made my POP3 accounts quit working. Currently on 38.5 for Windows 10.

Following various posts, I've tried to convert two specific email accounts to imap, and things are not going well.

My primary email is already imap and works fine. I've tried multiple times to convert the other two, and my current state is I've deleted those two accounts entirely (via Account Actions). When I try to install Existing Account, I eventually get to the point where the server config seems correct, but hitting "Done" results in the above message. I'd be surprised if imap.gmail.com can only support one email address. The emails are named differently, and use different passwords. Imap is enabled via browser based access to both accounts.

Incoming server imap.gmail.com:993 Outgoing smtp.gmail.com:465

My mother would like to export her very extensive address book in CSV format for safekeeping and eventually for porting it to a new email address. She recently updated to Thunderbird v. 115. I can find help for exporting address books in previous versions. In v115, under Tools, I can only find that a zip file of everything in the profiles directory can be made. Am I looking in the wrong place? Any suggestions besides downgrading to v. 102?

Most of my old mails are stored in a MBOX file (previously gmail). I would like to import them. The import/export NG tool is not compitable with version 115. Any other add-on doesn't work. The normal import function of T-bird can't handle a MBOX file directly. Importing the zip won't work. How can I get my old mails imported?

TB version: 115.1.0 (64-bit) Windows 10 (corporate laptop)

Fresh laptop, fresh install of TB.

When trying to connect email@example.com (not really my email), TB correctly detects that my domain is hosted at Google, configures IMAP and SMTP for OAuth2, and pops up the window to authenticate.

Instead of an authentication prompt, I'm met with this error:

URL: https://accounts.google.com/o/oauth2/auth?response_type=code&client_id=<CHOMP>aq8lmia8j<CHOMP>.apps.googleusercontent.com&redirect_uri=http%3A%2F%2Flocalhost&scope=https%3A%2F%2Fmail.google.com%2F+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fcarddav+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fcalendar&login_hint=user%40example.com

Text: Did Not Connect: Potential Security Issue

Thunderbird detected a potential security threat and did not continue to accounts.google.com because this website requires a secure connection.

can i go back to ver 102?? can't seem to find how to do this online importexporttool ng is grey out not avail. on new version i save dozens of emails from thunderbird to my computer for 'eternal' storage in pdf format & remove them from thunderbird but can't find an easy way to do this now if i try to save as they all go to a folder with .eml suffix which i don't want, if i try to print to pdf i have to name ea. file & if i try to save them to jpg i have to say 'ok' to ea. file i tried to do 119 files this morning & gave up, hate upgrades that change such important things

I'm trying to set up a bellsouth.net (ATT) account using the instructions at https://kb.uwm.edu/uwmhd/page.php?id=109671. The account setup flows perfectly until it's time to choose the Authentication Method for the Outgoing Server where the choice for OAuth2 is missing (see pic). Why isn't the OAuth2 option showing up? I'm using the most recent release of Thunderbird. Thank you.

Hi, I desperately need help please regarding Thunderbird Email. I factory reset my computer to get rid of a variety of bugs/slowness etc. I downloaded/printed the support info regarding profiles off the mozilla support site. i followed the instructions and saved my profile. there looked to be two profile file folders. i save them on an external drive. Reset my computer. put thunderbird back on, however the new version of Thunderbird doesnt seem to want to migrate my files back. Im really worried that Ive lost my whole history of emails. I have been with Thunderbird for more than 10 years and saved hundreds of emails in various email folders. Ive tried loading one profile folder, the other, then both and all other variations. ive made new profiles and tried to upload my old profiles and nothing works. I did manage to get a couple of my historical email folders to appear, and some sent items from years ago. But 95% of the stuff i still cant upload. Im not very IT savvy, but i believe ive followed the instructions properly. Is there anything else I can try. are my folders saved in the "server" somewhere that i can access? should i try an use an old version of thunderbird? any advice (in laymans terms) would be appreciated very much :) thanks jackie

on debian live:

$ uname -a Linux debian 5.10.0-18-amd64 #1 SMP Debian 5.10.140-1 (2022-09-02) x86_64 GNU/Linux

I am running: $ thunderbird --version

Thunderbird 91.13.0

to download all the data in my gmail account via POP3, but Thunderbird seems to be making assumptions about where to put your data and I haven't found a way to tell it where to put it; so, since it uses the user's home directory, the only way I think you could easily put the data where you want is by changing it, but I can't:

$ usermod --move-home --home "${_NEW_HOME}" "${_WHMI}" usermod: user user is currently used by process 1141 $ sudo ps -aux | grep 1141 user 1141 0.0 0.1 15600 9144 ? Ss Nov05 0:00 /lib/systemd/systemd --user user 50636 0.0 0.0 6244 712 pts/0 S+ 06:42 0:00 grep 1141

Unless they both try to exclusively access /etc/passwd, I can't understand how /lib/systemd/systemd could possibly relate to usermod.

Why is it TB doesn't have --data-type (POP3 or IMAP, ...) and --data-dir options you could enter in the command prompt at start up?

I am hacking my way around to be done with it. I am sure you have a very solution to my kind of problem. Any suggestions?

I recently installed Thunderbird on a new computer.I set it up to use my Yahoo account. It does receive emails sent to Yahoo but will not send. Every time i click SEND it asks for a password and always says it failed.

Under settings, there are 2 servers, IMAP and SMTP. Each has a different password, but at one point I made them the same. It does not matter because the outgoing server keeps changing its password to about 20 random letter and characters. At one point I copied these random characters into the clipboard and posted it in after it asked for a password...and it still FAILS.

I am using version 81.0.19 Until I get this fixed it is useless. An annoying thing is that each time I start Thunderbird, it asks for the password...on my previous pc it remembered it. Both machines are Windows 10. Can anyone help?