I-Firefox Isithangami Sokwesekwa

I have run into an annoyance where I am trying to click on a link in my email to open a new page. Clicking on the link makes a bar show up telling me that Firefox has prevented a popup from being opened (see attached image). I am given the option of managing my preferences / Firefox settings, where I can either go through multiple steps to permanently allow all pop-ups from that website until I restore my original settings, or uncheck a box to permanently allow all pop-ups from all sites until I check that box again. This is annoying because I have no interest in either allowing or disallowing all pop-ups from all websites, or all pop-ups from this specific website, every time I want to open a single pop-up from a specific site. I would rather that the warning bar which tells me that Firefox has blocked a pop-up also display a button allowing me to allow ONLY THIS SPECIFIC POP-UP IN THIS SPECIFIC CASE.

Is this a setting that exists in Firefox? Alternatively, is there a version of Firefox which does have a setting which would allow this? Or is this simply not a functionality that exists for this browser?

Hello! I want to work with burp suit application but for work with it the foxy proxy need. when I turned on the foxy proxy it always gives me different kind of error messages such ass "The proxy server is refusing connections". I tried everything I could but to no avail.

I suspect that my bank tried to show a verification pop-up while I was on a third-party site, and because pop-ups were disabled the third party rejected my request. My question is:

How much of my bank's website address do I need to put in the "Allowed Web Sites - Pop-ups" edit box, seeing as I wasn't on that website at the time. Would "https://name-of-bank.com" be sufficient? Or, are wildcards allowed in the URL?

Brand new installation of Ubuntu Focal (on an ARM Chromebook, using Crouton). Installed Firefox (104), runs fine but as soon as I sign into my Firefox account it immediately crashes. Continues to crash if I start in safe-mode, so I don't think the problem is an extension. After some online research and some trial and error I seem to have determined that I can sign into my Firefox account as long as password sync is disabled. But as soon as I enable password sync, Firefox immediately crashes.

Error message in terminal is always about GPU, which maybe isn't properly set up or maybe Firefox has a problem with it, but if I use the software renderer it doesn't cause a problem (MOZ_ENABLE_WAYLAND=0 firefox). Hard to imagine that this has anything to do with crashing when syncing passwords?

Crash Annotation GraphicsCriticalError: |[0][GFX1-]: No GPUs detected via PCI (t=2.77546) [GFX1-]: No GPUs detected via PCI Crash Annotation GraphicsCriticalError: |[0][GFX1-]: No GPUs detected via PCI (t=2.77546) |[1][GFX1-]: glxtest: process failed (received signal 11) (t=2.77573) [GFX1-]: glxtest: process failed (received signal 11) Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs Exiting due to channel error. Exiting due to channel error. Exiting due to channel error. Exiting due to channel error. Crash Annotation GraphicsCriticalError: |[C0][GFX1-]: Receive IPC close with reason=AbnormalShutdown (t=3.29811) Exiting due to channel error. Segmentation fault (core dumped)

I just got a chromebook from my work, and I'm unable to install firefox. I've tried searching for firefox download and clicked on the top result from Mozilla, but once it has finished downloading, I try clicking on the freshly downloaded folder but that just lets me see the folders and files within the big folder. I haven't had this experience before when trying to download firefox, but I'm also fairly new to using a chromebook. So I'm not sure if my issue is with the chromebook/OS, or maybe since it's through my work, I'm limited in what apps I can download? Any advice would be greatly appreciated. I'll do my best to attach a screenshot of the folder that appears.

I'm having a problem sharing websites with others via, for instance, Signal. Telegram, WhatsApp or a social medium. There used to be a share button in the toolbar, but this I cannot find anymore. At some time there were also the three dots in the address bar that dropped down a menu for the page, which included a 'share' option. These dots seem to have vanished. Also I vaguely remember that the "share" function was also in he tab context menu once upon a time. However dropping down that menu does not reveal any "share" function presently. Then there was, if I remember correctly, the possibility to click the File menu at the top of the screen and then click on the Share menu item over there. But also there the "share" function seems to have vanished. I also looked in the settings menu, to find if there is a setting there which switches on or off the sharing function. I could not find such a setting. In short, it seems that I am horribly overlooking the "share" function. Please help me find it. Thanks. (Firefox 112 for Manjaro Linux)

Hi everybody this will be a long question, and I would be really grateful for any kind of help anyone could give me, this is my case:

I use `firefox-sync` to manage all my logins information and firefox-sync's password is the unique password I save manually.

Currently I has problems with my O.S and I decided reinstall it. But also I have 2FA enable for mostly of my accounts, and firefox-sync is not the exception, and firefox-sync's 2FA is based on my gmail, so when I tried get logged on firefox-sync, firefox asks me for my verification code, but my verification code is in my gmail, and my gmail's password is in firefox-sync.

So I lost access to all my accounts, I lose my gmail, github, gitlab, stackoverflow, discord, etc etc... :'(

From the gmail side, I tried all that gmail let me try but unsuccessfully.

So, the only possibility that I see, is recover the information of the formatted partition and rebuild the previous state of Firefox. I mean:

Reading about firefox loggins, and taking a look to firefox's workdir (`$HOME/.mozilla`), I see firefox saves login's info in a json file located in `$HOME/.mozilla/$profile$/logins.json`.

So the basic idea is with a data recovery tool, try recover `.mozilla`s directory and replace it over the current environment so when I start firefox can get access to my login's info. But I'm not sure how much it is possible to recover the whole directory, and if is not posible, my question is:

What files next to `logins.json` should be my recovery targets to replace inside the `.mozilla` folder in order to reconstruct my accounts login information?

Hi!

I have encountered this really annoying problem on my Firefox app. I give details below. I installed Mozilla Firefox on my freshly installed Ubuntu 22.04.1 LTS. I tried installing it from Snap Store. However, when I tried saving an image from the web (or, truthfully, any other file chosen by the "Save As..." selection), nothing happened, again and again. I tried many things, including following relevant guides from the internet, but nothing changed. The Firefox version is the 107.0.1 (64-bit), a Mozilla Firefox Snap for Ubuntu canonical-002- 1.0. I, also, have to report some other things, as well. When tried installing the browser from the internet (I downloaded a compressed file, containing the executable), the same function seemed to work. I, now, use the executable to access Firefox. However, firstly, because other difficulties (not problems, but difficulties) arise and, secondly, because I'd really like ti use, mostly, snaps, I report this bug here requesting for help, as well.

Any helpful answer will be appreciated!

Thank you!

I installed Firefox-ESR on my Raspberry PI and noticed that I cannot play Udemy videos. After some research I found that the Widevine plugin is missing and the OpenH264 Video Codec is also not installed. Following the instructions from similar issues didn't solve the problem. I ticked off and on the "Play DRM-controlled content" button but this only brings the widevine plugin for a moment and after that it disappears. In the network tab I see no activity when click on this button, i.e. Firefox does not send requests.

Additionally the OpenH264 Video Codec is not installed and never installs.

Any ideas how to solve this?

Hello Firefox Support, I need help to upgrade the version of the security protocol that enables access to my NAS unit. Now the message;

"Secure Connection Failed An error occurred during a connection to 192.168.1.201. Peer using unsupported version of security protocol. Error code: SSL_ERROR_UNSUPPORTED_VERSION

   The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
   Please contact the website owners to inform them of this problem.

This website might not support the TLS 1.2 protocol, which is the minimum version supported by Firefox."

indicates I no longer can access my page until I find the remedy to this issue. Thank you in advance for cooperation and help with is matter.

I'm trying to migrate from Chrome to Firefox browser. I cant load Twitter and some other links. I get error message. JavaScript not enabled. I can't find a setting anywhere to enable it. Help!!

For Securing my Apache server i have created a CA and from that CA i have created a self-signed certificate. When i add the certificate to the certificate manager and try to access my domain with https i am getting this warning 'Warning: Potential Security Risk Ahead'. My certificate has enough validation. How can i get rid of this warning.

For several years now Firefox keeps the methodology to update in the background and then force the user to restart.

This always causes some loss.

There are multiple situations where this is not acceptable. Just to give one example: I just logged in an account and clicked to receive an authentication SMS. But then Firefox forced restart and I cannot login nor ask for a new SMS because the previous request was recent.

In my opinion this makes absolutely no sense. Is there an option the turn off this forced restart?

Home built. PC Ubuntu 22.04.1 LTS

Since we have update our OS from Ubuntu 20.04 LTS to Ubuntu 22.04 LTS (a few days ago) Firefox has only shown a Blank screen at first start up, only the very top line is visible showing "Activities" then "Firefox Web Browser". Nothing will work, the only thing that does is Quit.

Restarting Firefox the second time seems to work Okay.

Please can you advise me?

More info: richard@charged-particle:~$ firefox -P Gtk-Message: 10:11:53.892: Failed to load module "canberra-gtk-module" Gtk-Message: 10:11:53.894: Failed to load module "canberra-gtk-module" ATTENTION: default value of option mesa_glthread overridden by environment. ATTENTION: default value of option mesa_glthread overridden by environment. ATTENTION: default value of option mesa_glthread overridden by environment. Gtk-Message: 10:12:06.820: Failed to load module "canberra-gtk-module" Gtk-Message: 10:12:06.822: Failed to load module "canberra-gtk-module" ATTENTION: default value of option mesa_glthread overridden by environment. ATTENTION: default value of option mesa_glthread overridden by environment. ATTENTION: default value of option mesa_glthread overridden by environment. Missing chrome or resource URL: resource://gre/modules/UpdateListener.jsm Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs

I went to settings and set firefox to open links in a NEW TAB instead of a new window, but it still opens links in a new window. I did a search on google and when I click on the link for the website to see the information it is still opening in a new window. How can I fix this so I don't have a lot of new windows. It's irritating to have to close all those stinking windows just to get back to my original window. I just want the links I click on to open in a new tab.

Hi, I've been struggling with this for months and can't find an easy solution or a good explanation. I'm running Ubuntu 22.04 pretty basic, I don't have many custom repositories enabled or anything, just a few additional packages like slack, Teams or Chrome. Ubuntu switched Firefox to snaps as well, and I can't get internet access with it. The error message is:

--- May 12 12:16:20 nuc kernel: [12948.381392] audit: type=1400 audit(1683886580.562:131): apparmor="DENIED" operation="open" profile="snap.firefox.firefox" name="/etc/fstab" pid=7731 comm="firefox" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 May 12 12:15:43 nuc rtkit-daemon[1030]: message repeated 3 times: [ Supervising 10 threads of 4 processes of 1 users.] May 12 12:16:20 nuc dbus-daemon[790]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.175' (uid=1000 pid=7731 comm="/snap/firefox/2645/usr/lib/firefox/firefox " label="snap.firefox.firefox (enforce)") ---

Simply stopping (and aa-teardown) doesn't work at all, Firefox doesn't even start without apparmor running. I'm not an expert with apparmor, but I wanted to set in complain mode instead enforce, but I'm struggling with that, too. I didn't touch the /etc/hosts file, the error message is a little different on another Ubuntu 22.04 computer I use, there it complains about permission denied for the resolve.conf. So I'm asking the community, how do you deal with this? Searching the web gives me all kinds of ideas, but none of them work. Could anyone help me out here?

Thanks!

With the latest upgrade to Firefox 107.0 there is no option any more to import or manage certificates. Going to Settings/Privacy & Security/Certificates and selecting View Certificates results in a window showing installed certificates with only OK button at the bottom of the window. No option to import, delete, save or anything else. OS: OpenSuse Linux 64bit

I updated Firefox on July 1, 2023 and the dark mode stopped working. I used to be able to have all website and pages dark, I've been looking for a solution or work around with no luck. Any forum questions that I've read has all sounded like a "canned" answer with no results. The questions asked were never answered, and it's been very frustrating. I have glaucoma and have great problems looking at a white screen. Even this page is bright white and hard to read and I'm unable to change it to dark. I've been hoping to see an update solving this problem but there hasn't been one. Please send me a real resolution for this problem. Thank you