Kukhonjiswa imibuzo ethegiwe: Veza yonke imibuzo

Broken or no images at all in YahooMail

Hello, Is there a resolve for missing or broken images in YahooMail while using Firefox? I think I've exhausted my research into the matter. It works in Safari with defau… (funda kabanzi)

Hello,

Is there a resolve for missing or broken images in YahooMail while using Firefox? I think I've exhausted my research into the matter. It works in Safari with default settings.

Thanks in advance for your help! J

Asked by expandedmind1 1 usuku oludlule

  • Kusonjululiwe

Can't access site in firefox that I can in safari

There is a site that I've been accessing for months from firefox. Today, all my attempts to access it result in "Forbidden: You don't have permission to access this resou… (funda kabanzi)

There is a site that I've been accessing for months from firefox. Today, all my attempts to access it result in "Forbidden: You don't have permission to access this resource." If I bring up a safari browser, the exact same URL loads fine. I didn't change any firefox configuration settings. Any ideas?

Asked by Daniel 1 inyanga edlule

Answered by jscher2000 1 usuku oludlule

browser reseting

i recently downloaded firefox browser. i have shut down the computer twice since then and both times the browser has reset itself. it acts like i am a new user and my cus… (funda kabanzi)

i recently downloaded firefox browser. i have shut down the computer twice since then and both times the browser has reset itself. it acts like i am a new user and my customizations are lost. quite frustrating.

Asked by pothastiva 1 usuku oludlule

Last reply by FredMcD 1 usuku oludlule

How do I figure out why Content tracking is blocking my site?

We have a site that for some reason just started getting blocked by FireFox's Tracking content setting in private browsing mode. We have a Production build that still wor… (funda kabanzi)

We have a site that for some reason just started getting blocked by FireFox's Tracking content setting in private browsing mode. We have a Production build that still works but our QA build does not. For the life of my I can't figure out what changed that would have triggered Tracking content to start blocking the site. Basically the site will load but we only get a blank page.

Is there any way to debug what exactly the Tracking content filter is blocking?

Asked by sam.redmond 2 ezinsukwini ezidlule

Last reply by sam.redmond 1 usuku oludlule

  • Kusonjululiwe

can't logon to two banking sites

I recently couldn't logon to my local online banking site. The thing is, is had been working just fine for years, and then all of sudden stopped working. Upon calling t… (funda kabanzi)

I recently couldn't logon to my local online banking site. The thing is, is had been working just fine for years, and then all of sudden stopped working. Upon calling the bank they said everything looked fine on their end and try using a different browser. I used Chrome (would rather NOT use that browser), and I could logon fine. I found that if I disabled Privacy Possum it worked fine, so, now when I want to logon to my local bank I just disable Privacy Possum and it works. But I don't understand why it all of sudden quit working.

Now I can't logon to my Penfed credit card account. I tried turning off all the extensions, NO help. I went to the Firefox trouble shooting section and refreshed Firefox and did what ever else they said to do like clear ALL my history and cache...still no help. My Penfed had been working just fine until today, and it also comes up fine using Chrome. Is there anything that has changed in Firefox that is blocking my two online banking accounts that you know of?? This seems very strange.

Asked by Runningwolf 1 isonto elidlule

Answered by cor-el 1 isonto elidlule

MY Bank no longer accepts firefox

You don't have permission to access "http://www1.bmoharris.com/api/us-banking/auth/authenticate-widget?" on this server. Reference #18.64a83817.1614052575.13e87f8 … (funda kabanzi)

You don't have permission to access "http://www1.bmoharris.com/api/us-banking/auth/authenticate-widget?" on this server.

Reference #18.64a83817.1614052575.13e87f8

Asked by TomCurt 1 usuku oludlule

Last reply by cor-el 1 usuku oludlule

When using STG addon, how do you close the STG tab groups?

I've made several TAB GROUPS with the STG plugin. But when I want to close the tab group windows I get a warning like: "You are about to close 37 tabs. Are you sure you w… (funda kabanzi)

I've made several TAB GROUPS with the STG plugin. But when I want to close the tab group windows I get a warning like: "You are about to close 37 tabs. Are you sure you want to continue?" What? How do I close the windows without closing all the tabs and loosing them? Isn't the purpose of using STG to help you organize all of your open tabs so that you CAN close the windows? Or, when I close the STG Group and close the tabs, will they still be accessible through the STG Manage Groups window? Thanks for the help!

Asked by sandzbox 2 ezinsukwini ezidlule

Last reply by cor-el 1 usuku oludlule

  • Kusonjululiwe

log in cumbersome compared to safari on mac

After dragging firefox icon to dock on mac, unlike safari, it asks for user id and password each time I want to use it, sending notification by e-mail about the log in. … (funda kabanzi)

After dragging firefox icon to dock on mac, unlike safari, it asks for user id and password each time I want to use it, sending notification by e-mail about the log in. Is this necessary as safari doesn't need this, and if so, is it easier just to use safari as default browser instead of firefox? Or can this be changed in settings without harming my security, as I'm using it on my mac from home. Some things work better with Firefox, but it I have to login and enter a password each time to use it, then it makes it cumbersome to use Firefox as a default browser. Thank you, First time user of Firefox on Mac.

Asked by jeff136 3 ezinsukwini ezidlule

Answered by Wesley Branton 3 ezinsukwini ezidlule

  • Kusonjululiwe

Bookmarks sidebar not working properly.

I keep my Bookmarks Sidebar open. It works properly for a few minutes and then it doesn't. The behavior it shows is as follows. 1. It quits scrolling. I have to click the… (funda kabanzi)

I keep my Bookmarks Sidebar open. It works properly for a few minutes and then it doesn't. The behavior it shows is as follows.

1. It quits scrolling. I have to click the web page and go back to the sidebar to scroll again. 2. It scrambles the bookmarks when I click one. 3. When I click one bookmark it opens some other one.

Basically it acts crazy. The one fix I have found is when it is acting up and I close and reopen the sidebar it starts working properly again for a while. Then the problems repeats until I close and reopen the sidebar.

Late 2011 13" MacBook Pro MacOS 10.13.6

Asked by rswojo 5 ezinsukwini ezidlule

Answered by cor-el 4 ezinsukwini ezidlule

website will not login

Firefox will not work with Farmers.com(insurance) website. The site will not let me login. When I hit login it just 'flashes' and the page remains the same. I am using FF… (funda kabanzi)

Firefox will not work with Farmers.com(insurance) website. The site will not let me login. When I hit login it just 'flashes' and the page remains the same. I am using FF 85.0.2 and an Imac running High Sierra 10.13.6. I was told by the Farmers tech person that there is no problem on their end. Any ideas?

Thanks.

Asked by Mike 2 ezinsukwini ezidlule

Last reply by cor-el 2 ezinsukwini ezidlule

Textexpander in Google Sheets adds a line break upon expansion in Firefox

I've come across a problem with using Textexpander in Google Sheets in Firefox. Say I have a snippet that expands to =INDEX(B2:B,MATCH("green",A2:A,0),1) Now if I expand… (funda kabanzi)

I've come across a problem with using Textexpander in Google Sheets in Firefox.

Say I have a snippet that expands to =INDEX(B2:B,MATCH("green",A2:A,0),1)

Now if I expand that by just typing the abbreviation shortcut, i.e. gs.index, it gets expanded, but has a line break before it within the cell so it doesn't get recognised as a formula. I have to manually delete the line break out.

However, if I use the global keyboard shortcut to search for the snippet and select it from the list, when entered, it goes into the cell without a preceding line break and gets registered as a formula.

Is there anyway to overcome this issue that you know of? I'm using Firefox 85.0.2, mainly because I'm on High Sierra and Safari cannot be updated beyond 13.1.2. Incidentally, I don't get this problem when using Safari.

I've raised this with the guys at Smile Software too, but asking here as it does seem to be a Firefox-specific issue.

Thanks.

Asked by lp3 6 ezinsukwini ezidlule

Last reply by jscher2000 2 ezinsukwini ezidlule

extensions stopped working

Hi, This weekend all my installed extensions stopped working. I've tried to erase and re-install, but it doesn't seem to work. One, very needed extension, is adblocker u… (funda kabanzi)

Hi, This weekend all my installed extensions stopped working. I've tried to erase and re-install, but it doesn't seem to work. One, very needed extension, is adblocker ultimate to name one. I truly hope this fixable.

All best, Mei

Asked by baomeilong 2 ezinsukwini ezidlule

Last reply by cor-el 2 ezinsukwini ezidlule

Unable to reset Primary Password

I have followed the instructions and it says my Primary Password has been reset - but it won't let me create a new password and still is asking for the password. I need f… (funda kabanzi)

I have followed the instructions and it says my Primary Password has been reset - but it won't let me create a new password and still is asking for the password. I need further help resetting this?

Asked by Genevieve.tomes 2 ezinsukwini ezidlule

Last reply by cor-el 2 ezinsukwini ezidlule

POST requests between containers

Is there some way to pass POST data when navigating between containers? As someone who uses searX as their search engine, which uses POST requests to perform searches, it… (funda kabanzi)

Is there some way to pass POST data when navigating between containers? As someone who uses searX as their search engine, which uses POST requests to perform searches, it is very inconvenient that I cannot make searches when the site that I'm searching from is in one container and the search engine I'm using is set to open in a different container, as the data containing my search request does not actually get passed.

Asked by TheCultLeader666 3 ezinsukwini ezidlule

Last reply by TheCultLeader666 2 ezinsukwini ezidlule