顯示問題標籤 顯示所有問題

Plasma-Browser-Integration doesn't work

I have the plasma browser integration extension and the corresponding package for my distro. But it doesn't work and I get the "failed to connect to native host" message.… (閱讀更多)

I have the plasma browser integration extension and the corresponding package for my distro. But it doesn't work and I get the "failed to connect to native host" message. Am I doing something wrong? I use: KDE neon 5.27 KDE plasma version: 5.27.3 Firefox edition 111.0, Mozilla Firefox for Ubuntu Thanks in advance!

mxprasinos 於 1 週前 詢問

mxprasinos 最近回覆於 2 天前

Unable to login - Invalid authorization key or 2FA codes or tried too many times

TL;DR: I ended up with 2FA disabled and recovery key enabled Hello people ! I'm currently testing Firefox Account features such bookmark syncing and its login secu… (閱讀更多)

TL;DR: I ended up with 2FA disabled and recovery key enabled

Hello people !

I'm currently testing Firefox Account features such bookmark syncing and its login security (not password storage/sync). Unfortunately I'm having big trouble authenticating myself to the service right now.

I have 2 testing accounts with the following configuration :

  1. I've setup 2FA authentication.
  2. I did not set a secondary email.
  3. I did not set an account recovery key.

Here are some of the tests I'm doing :

  1. I start by doing several login/logout to check if 2FA is working as expected.
  2. Then I add a secondary email then make it primary then remove the previous primary email.
  3. Then again login/logout several times to check if 2FA is working as expected.

At some point I'm unable to login after some iterations of step 3) above.

  1. At first I get an error saying my 2FA code is incorrect. But it allows me to login successfully using one of my 2FA backup.
  2. Then again I logout/login several times to check if 2FA is working as it should be.
  3. Then at some point I get the same error again saying my 2FA code is incorrect. Trying several unused 2FA backup fails with error saying they're also incorrect.
  4. Then it finally says that I've tried too many time and suggests I should retry 15mins later.
  5. When I try to login after some time it then ask me for an authorization code sent to my email. But then it says every authorization code I try is also incorrect.
  6. I managed to disable 2FA from on one of the account I was still logged in Firefox. But when trying to login on another Firefox profile then I get the same error saying I tried too many times.

Just for clarification - Please note that I may have use one or two 2FA codes instead of authorization keys when it asked me so. But I did not mistyped any 2FA or auth code I've tried.

And after several hours of giving up on it - the problem suddenly vanished and I could login/logout fine. As a precaution I add a recovery key and decided to disable 2FA because I can be sure it will work as is should.

Maybe I get locked but I dont know what really happened. I believe I did not a lot of login abuse though. I just feel like it's a big issue for my case because I could not rely on the 2FA backup and authorization keys. The error didn't help either because it likely says I've been locked. Whereas having one or two mistyped codes or using "several correct 2FA backup and auth keys" which were wrongly considered incorrect - should not be treated as a login abuse or brute force.

From now on I will likely disable 2FA if using this service. I understand these tests are not things you do on everyday use but I can't imagine how bad it would feel if I have sync sensitive data such as passwords and have to wait hours to unlock access to my account (even if not to access those data).

webheatsandwich 於 4 天前 詢問

webheatsandwich 最近回覆於 4 天前

Remove bookmark editor dialog

Hello, Is there a way to completely remove the bookmark editor? I have it configured to not show when adding a bookmark and would like to not see it when removing it. Th… (閱讀更多)

Hello,

Is there a way to completely remove the bookmark editor? I have it configured to not show when adding a bookmark and would like to not see it when removing it. The button in the addres bar should toggle between add/remove with no ui.

Regards.

jlwally 於 2 週前 詢問

jlwally 最近回覆於 2 週前

Firefox menu only works if mouse button is held

fc37.x86_64 ff 110 64 bit Bookmarks, I click on a folder, up pops a submenu. As soon as I move the mouse to select an item in the submenu - poof - submenu gone. If I … (閱讀更多)

fc37.x86_64 ff 110 64 bit

Bookmarks, I click on a folder, up pops a submenu. As soon as I move the mouse to select an item in the submenu - poof - submenu gone. If I hold the mouse button down and drag to the submenu item (and subsub...menu.item) then let got - it works. I should be able to "click" on an bookmark, then "click" on a menu item, then "click" on ... without having to "hold" the mouse button. - I'm guessing "onmouseOver" and not "onmouseClick" somewhere.

cal.lidderdale 於 1 週前 詢問

cal.lidderdale 最近回覆於 6 天前

Inactive scroll thumb is nearly invisible.

Hello those wiser than me, When my Firefox 110 goes inactive by clicking elsewhere, the only change is that selected elements temporarily de-select and the scrollbar thum… (閱讀更多)

Hello those wiser than me, When my Firefox 110 goes inactive by clicking elsewhere, the only change is that selected elements temporarily de-select and the scrollbar thumb turns color to one almost the same as the track, making it nearly invisible. Is there any way to keep it the same (much darker grey) when it is not the active window with the focus? There are a few themes that don't exhibit this behavior, but I could not find a dark one. My search on the subject yields only webpage design talk or obsolete pre v78 add-ons.

I'm on Linux Mint 20.3 Cinnamon with FF's built-in dark system theme. Thanks in advance.

2 against Nature 於 1 週前 詢問

2 against Nature 最近回覆於 2 天前

What is the difference between network.dnsCacheExpiration and network.dnsCacheExpirationGracePeriod?

In about:config, I see two settings for controlling the minimum amount of time for DNS cache expiration: network.dnsCacheExpiration and network.dnsCacheExpirationGracePer… (閱讀更多)

In about:config, I see two settings for controlling the minimum amount of time for DNS cache expiration: network.dnsCacheExpiration and network.dnsCacheExpirationGracePeriod. What is the difference between them? They are both set to 60 seconds by default.

zogbin 於 2 天前 詢問

network.dnsCacheExpiration is ignored when using DNS over HTTPS

When DNS over HTTPS is not enabled in Firefox and I set network.dnsCacheExpiration to 600 seconds, evidence from about:networking#dns shows that the minimum DNS cache exp… (閱讀更多)

When DNS over HTTPS is not enabled in Firefox and I set network.dnsCacheExpiration to 600 seconds, evidence from about:networking#dns shows that the minimum DNS cache expiration time is indeed 600 seconds. However, when I enable DNS over HTTPS and set network.dnsCacheExpiration to 600 seconds, the network.dnsCacheExpiration setting seems to be ignored. New DNS cache entries are able to have far less than 600 seconds to expiry. Why is network.dnsCacheExpiration ignored when DNS over HTTPS is enabled? Could this be a bug in Firefox?

zogbin 於 2 天前 詢問

I never want to open local files from the address bar

When I try to google some absolute file path (e.g. /etc/fstab) in the address bar, instead of googling, it just opens the file from my local filesystem (as file:///etc/fs… (閱讀更多)

When I try to google some absolute file path (e.g. /etc/fstab) in the address bar, instead of googling, it just opens the file from my local filesystem (as file:///etc/fstab)

I know that I can use search keywords or quote file paths, but even so, I think that users hardly ever use browsers to open local files by absolute url. So this UX totally disappoints me because I need to keep this in my mind every time I want to google file or I lose my mental concentration and then I need to change the focus from solving my issue here and now to fixing this misbehavior

Can I somehow fix this behavior with about:config?

oficsu 於 6 天前 詢問

Transparent user picture in Firefox

My previous avatar was transparent and looked good on both dark and light browser themes, but I've made a change, uploaded my new avatar on the Firefox Account page and..… (閱讀更多)

My previous avatar was transparent and looked good on both dark and light browser themes, but I've made a change, uploaded my new avatar on the Firefox Account page and... transparent parts of the picture have become gray, and now they look very ugly on light themes in the browser (or on Firefox/Mozilla pages). But I can't even turn transparent parts into white because it still looks awful with dark browser theme. Is it a bug, or is it an intended change?

oficsu 於 6 天前 詢問

Is it a bug when GPU on Windows takes 2-3GB?

Sometimes, usually, when I watch YouTube, I could see in the Process Manager (about:processes) that GPU process takes 2-3 GB. YouTube could be open in multiple tabs, bu… (閱讀更多)

Sometimes, usually, when I watch YouTube, I could see in the Process Manager (about:processes) that GPU process takes 2-3 GB. YouTube could be open in multiple tabs, but I watch only in one tab. All other YouTubes have been stopped. (I have always the latest version of Firefox. ) Is it a bug? Maybe disable hardware acceleration?

YDUBINSKY 於 4 天前 詢問

How can I hermetically segregate my multiple Microsoft accounts into different tab containers?

I am a consultant and I have, typically, about 2-3 clients ongoing at any one time. These clients, inevitably, each assign me a Microsoft 365 userid. I also have my own p… (閱讀更多)

I am a consultant and I have, typically, about 2-3 clients ongoing at any one time. These clients, inevitably, each assign me a Microsoft 365 userid. I also have my own personal Microsoft 365 userid.

Unfortunately, given Microsoft's fairly aggressive attempts to "capture" my attention, it has "remembered" each and every one of these accounts, and it sort of tries to log me in all the time with the wrong account into different clients' Office 365 online platforms. So I sometimes find myself sending external mails from the wrong accounts etc. It really is a mess, because then certain O365 "policies" from one account, prevent another account from logging in, for example, creating what I suspect is an almighty spaghetti bunfight of clashing Microsoft properties in my browser.

So I thought I'd assign each client their own container, and using the multi-account container addin, I though this would segregate the accounts, by setting it up automatically to open my different client O365 bookmarks in different colour-coded containers.

Unfortunately this not seem to keep Microsoft in check. It seems to be able to "see" other MS logins across containers, because a few hours ago I experienced a situation where in Client A's container, Microsoft decided that I should be logged out and logged back in with Client B, for some unknown reason, probably because I had logged in as Client B in another container tab. But this doesn't seem to happen all the time. I can't pin down exactly when it happens. Microsoft is basically able to see across my containers, it appears.

Is there any way to keep each Microsoft account where it belongs, namely strictly inside the container tab I have assigned each to? Facebook style? With a nice high unclimbable fence?

nicercat 於 3 天前 詢問

Firefox can't establish connection to websocket, fixed after restart

Hi, I've been having problems with my Firefox. After some time (~1 day?) all websocket connections stop working until I restart the browser. In JS console I can see "Fire… (閱讀更多)

Hi, I've been having problems with my Firefox. After some time (~1 day?) all websocket connections stop working until I restart the browser. In JS console I can see "Firefox can't establish connection to ws://..." (or wss://).

This really affects all pages, for example Discord, Onshape, Jupyter notebook, and 100% gets fixed when FF is restarted.

I'm looking mostly for some debugging tips. So far I've tried increasing `network.websocket.max-connections` from 200 to 500, without any luck. I have also tried to examine some pages for open websockets using developer tools, but didn't find anything suspicious.

I'm running version 110.0.1 built on Gentoo, but this issue has been with me for couple versions already. I have a few extensions, including uBlock origin and leechblock, approximately 100-200 open tabs in 4-5 windows at all times. Restarting firefox every day is not the worst, but I'd definitely prefer to not have to do that

blue.cube 於 5 天前 詢問

Firefox keeps trying to load Youtube pages even though I am Offline

I am using Firefox on Ubuntu 18.04 (current release 111.0, but the problem has occured over the last two releases). I like to open the individual page from a Youtube pla… (閱讀更多)

I am using Firefox on Ubuntu 18.04 (current release 111.0, but the problem has occured over the last two releases). I like to open the individual page from a Youtube playlist so that if I get distracted, I won't lose my place. I do this either when disconnected from the internet or using the "work offline" feature. Previously firefox would show either "Problem loading page" or "Serve not found," but now it keeps trying to load youtube which sucks up time, cpu, and memory.

These are pages that I have never been to before so there should be no record in history, but even so I have tried clearing my history and this did not help. I have tried a bunch of other sites, but Youtube is the only site that I have seen this behavior on. Attached is an example (The google page and the first youtube tab were loaded online). The shown youtube tab (second tab) and a random webpage from google (last tab) show this behavior.

Could you please help me.

SH 於 2 天前 詢問