顯示下列標籤的問題: 顯示所有問題
  • 已解決
  • 封存

Firefox is popping up a small pop-up asking for a password.

Everything under Logins and Passwords, and Forms and Autofill is unchecked. A "Primary Password" has never been set in firefox. Can't get it to stop asking, which is ma… (閱讀更多)

Everything under Logins and Passwords, and Forms and Autofill is unchecked. A "Primary Password" has never been set in firefox.

Can't get it to stop asking, which is made worse by the fact that nothing is selected to prompt it nor is anything stored for it to use.

Shawn.Janson 於 1 年前 詢問

jscher2000 - Support Volunteer 於 1 年前 解答

  • 已解決
  • 封存

firefox is redirecting from localhost:8080 to localhost:8081

Currently Firefox is redirecting http://localhost:8080 to http://localhost:8081 , each time when type the address in the URL address bar. I have been working with a cont… (閱讀更多)

Currently Firefox is redirecting http://localhost:8080 to http://localhost:8081 , each time when type the address in the URL address bar.

I have been working with a container wordpress. I have tested in chrome the address http://localhost:8080 and all works fine.

How can we fix that problems, thanks in advance.

I have removed cookies and site data of localhost in Privacy-and-security> Manage-data>

screen-cast https://imgur.com/lWV1WFa

christian 於 1 年前 詢問

christian 於 1 年前 解答

  • 已解決
  • 封存

Is it possible to have multiple policies.json files?

Hi, I have a policies.json file that acts as a white list for me (black listed all urls and then white listed needed urls). I was wondering is it possible to create a s… (閱讀更多)

Hi,

I have a policies.json file that acts as a white list for me (black listed all urls and then white listed needed urls). I was wondering is it possible to create a second .json file that will act as a black list. I want to give access to a partial admin. user to the policy.json file to be able to edit the file and add websites if needed but I want a another black list running as well to block out specific websites (this one the partial admin. will not have access to).

So to start off the first question would be is firefox only limited to one .json file for policies or can you have multiple .json files (I want to call the second file blacklist.json)? Btw I use Debian and Firefox-esr.

Thanks.

MozillaFirefoxMan 於 1 年前 詢問

MozillaFirefoxMan 於 1 年前 解答

  • 已解決
  • 封存

How to import data from old proile

I've installed a new version of Ubuntu Linux and - as recommended on this page's FAQs - backed up my firefox profile, than copied it into the profile folder on the new os… (閱讀更多)

I've installed a new version of Ubuntu Linux and - as recommended on this page's FAQs - backed up my firefox profile, than copied it into the profile folder on the new os. Now Firefox tells me "You've launched an older version of firefox" and forces me to create a new profile :( Also loading the old profile in "about:profiles" leads to the same result

How can i restore at least my passwords? (When i try to copy only 4.db and logins.json from the old to the new profile, i get the same result)

I can't find an "import old profile"-function anywhere...

dwm3 於 1 年前 詢問

dwm3 於 1 年前 解答

  • 已解決
  • 封存

Missing "Send Tab to Device" button on linux

When I right click a tab I do not get the option to "Send Tab to Device" that I am used to on Windows. Is this missing from the Linux version? Or is there a setting for i… (閱讀更多)

When I right click a tab I do not get the option to "Send Tab to Device" that I am used to on Windows. Is this missing from the Linux version? Or is there a setting for it?

I have searched the internet for this problem and could not find such things. I would appreciate any help!

info3416 於 1 年前 詢問

info3416 於 1 年前 解答

  • 已解決
  • 封存

Disabling media.hardwaremediakeys.enabled does nothing

I don't like Firefox videos showing up in my media player controls, so I turned off media.hardwarekeys.enabled, but it doesn't seem to do anything anymore. I'm pretty sur… (閱讀更多)

I don't like Firefox videos showing up in my media player controls, so I turned off media.hardwarekeys.enabled, but it doesn't seem to do anything anymore. I'm pretty sure it used to work at some point, don't know when it stopped working. Even though I have it turned off, videos still appears in the Media Player on my panel, and I can play and pause them with the play/pause button on my keyboard. I have also tried disabling dom.media.mediasession.enabled, but that doesn't help either.

KDE Neon 5.27 Firefox 113.0.2

rbits0 於 1 年前 詢問

rbits0 於 1 年前 解答

  • 已解決
  • 封存

Firefox Sync Login NOT Working Since v112.0.2

Good morning! Since v112.0.2 my Firefox logged itself out of Sync and will not allow me log back in. When I click the "Sync and Save Data" in the pulldown menu, the page… (閱讀更多)

Good morning!

Since v112.0.2 my Firefox logged itself out of Sync and will not allow me log back in. When I click the "Sync and Save Data" in the pulldown menu, the page spinner just spins and spins. The login page never loads.

Oddly, I couldn't even login to my Mozilla account here to post this. I had to use "Ungoogled" Chromium to load the page. I've never had any Sync issues with FF, that I can remember. This just "appeared" with v112.0.2 and continues with v113.0.

I did try to access the Sync login page while in Safe (Troubleshooting) Mode... no difference, though; same spinning spinner.

I'm running Slackware Linux on a desktop computer. No other changes have been made on this system other than upgrading from FF v112.0.1. to v112.0.2. This is when the Sync issue started.

Any ideas? Any assitance would be very much appreciated. I could just go to Chromium full-time, but I would not want to do that. I've been a Mozilla browser user for 23 years. The Chromium is only on my system as a backup browser, along with SeaMonkey. Yeah... I have a Seamonkey. :)

Anyway, thanks in advance for any help/ideas to allow me to troubleshoot/resolve this.

Regards,

~Eric

V. T. Eric Layton 於 2 年前 詢問

cor-el 於 2 年前 解答

  • 已解決
  • 封存

Ubuntu crashes while moving a Firefox tab with mouse

Hello Volunteers, Ubuntu crashes while moving around a Firefox tab with a mouse, IF the mouse cursor goes thru the top bar of the laptop screen. I am using Firefox V 113… (閱讀更多)

Hello Volunteers,

Ubuntu crashes while moving around a Firefox tab with a mouse, IF the mouse cursor goes thru the top bar of the laptop screen. I am using Firefox V 113.0.2, Build ID: 20230522193126 on Ubuntu 23.04. This could be an Ubuntu problem or a Firefox problem.

Thanks Dilip Deodhar

DD 於 1 年前 詢問

jonzn4SUSE 於 1 年前 解答

  • 已解決
  • 封存

Shaky video

Firefox 114. Fedora 38 with Gnome 44.2. All video playback is shaky except in YouTube. MSNBC, CNN, Instagram, Twitter, and ESPN video is shaky. Tried disabling all add-on… (閱讀更多)

Firefox 114. Fedora 38 with Gnome 44.2. All video playback is shaky except in YouTube. MSNBC, CNN, Instagram, Twitter, and ESPN video is shaky. Tried disabling all add-ons and no help. Any ideas? Thanks in advance. Bob.

1bbrazie 於 1 年前 詢問

jonzn4SUSE 於 1 年前 解答

  • 已解決
  • 封存

What's next firefox-esr version? Cuz I have problem to downgrade profile

I use debian and firefox-esr. I have problem right now! I used firefox version 105.0.1 for short times, then firefox transformed my profile to new version profile, so n… (閱讀更多)

I use debian and firefox-esr.

I have problem right now!

I used firefox version 105.0.1 for short times, then firefox transformed my profile to new version profile, so now I can't back to 102-esr version again, I have this message:

`Your Firefox profile cannot be loaded. It may be missing or inaccessible.`

So i try this command to fix problem

firefox-esr -allow-downgrade

or

firefox-esr --allow-downgrade

But still can't downgrade, So I have to ask could I downgrade? else I have to wait for new esr version?

What's the next firefox-esr version? or release date?

A1Gard 於 1 年前 詢問

cor-el 於 1 年前 解答

  • 已解決
  • 封存

SVG processing limit(s) ?

Related to some personal SVG project files. Which are relative large files (containing lots of generated paths and other data). On the largest of these files I spotted t… (閱讀更多)

Related to some personal SVG project files. Which are relative large files (containing lots of generated paths and other data).

On the largest of these files I spotted that some general svg-viewer failed with a "XML parse error: cannot load more than 200.000 XML elements" error message.

The same file, when viewed in Firefox (114~, Linux, Mint), also developed some odd hiccup that did not make sense. Unless ...

Is there a similar limitation active in Firefox ?

- I tried to see if "Inspect>Console" gave some potential related message on this. But spotted nothing out of the ordinary. - Searched developer.mozilla.org for any related svg data. But could not find any. - After ditching some data in the effected file, unrelated to the hiccup part, the hiccup disappeared. Suggesting I did hit some svg limit in Firefox. - File size: ~26.5MB. Number of elements: Other than more than 200.000, unknown at this point. (not sure how to count them at this moment either)

mvgulik 於 1 年前 詢問

mvgulik 於 1 年前 解答

  • 已解決
  • 封存

Auto-fill for other countries

Hi there! I am a long time Chrome user and decided to try Mozilla Firefox. I loved it and after a bit of tweaking, I run into a problem I can't deal with myself. In Chro… (閱讀更多)

Hi there! I am a long time Chrome user and decided to try Mozilla Firefox. I loved it and after a bit of tweaking, I run into a problem I can't deal with myself. In Chrome I loved auto fill options every time I needed the option for my home address, email address or credit card. In Firefox I just can't do it. The option is only available for Canada or SUA. Is there any way I can make it work? Of course, I looked for some add-ons and actually found several, but given the fact that auto-fill in my case deals with personal and sensitive data, I need a safer method. Is there any? Thank you!

DF 於 1 年前 詢問

jscher2000 - Support Volunteer 於 1 年前 解答

  • 已解決
  • 封存

Difference in fonts/font size in Firefox 114 vs 113

Just updated to Firefox 114 from version 113 on Fedora 37 and spotted difference in the font rendering using the old profile. On Firefox 114, the fonts are larger. I cou… (閱讀更多)

Just updated to Firefox 114 from version 113 on Fedora 37 and spotted difference in the font rendering using the old profile.

On Firefox 114, the fonts are larger. I could not make it the same as in Firefox 113, despite all the configuration in the profile is the same. Downgrading to Firefox 113 return the previous font size/rendering.

However, in Firefox 114 there's a font difference even between my old profile and fresh new profile. The font configuration in the settings is exactly the same between these two profiles (default profile, Latin and Cyrillic — the same font families, sizes, checkboxes, i've even checked about:config options searching by "font" — all the same).

Check the screenshots.

iam18 於 1 年前 詢問

iam18 於 1 年前 解答

  • 已解決
  • 封存

Funcions `loadOneTab` and `loadURI` in 2023 in Firefox Experimental API?

I am using the Experimental API in my private Firefox extension. So far, I've been using Firefox 102 ESR, but I'm planning to switch to Firefox ESR 115. There's already … (閱讀更多)

I am using the Experimental API in my private Firefox extension.

So far, I've been using Firefox 102 ESR, but I'm planning to switch to Firefox ESR 115. There's already a Firefox 115 Beta available, so I've started testing it with my private extension.

So far, I've been using internal Firefox functions like `loadOneTab` and `loadURI` and it worked very well.

I used the `loadOneTab` function like this:

``` const placesURL = "chrome://browser/content/places/places.xhtml"; window.gBrowser.loadOneTab( placesURL, { inBackground: false, allowThirdPartyFixup : true, relatedToCurrent : true, triggeringPrincipal : services.scriptSecurityManager.getSystemPrincipal() } ); ```

But the `loadOneTab` function no longer exists at all in Firefox's internal API. What should I replace it with?

I found the function `_createTab`:

``` // window.gBrowser._createTab({ uriString: placesURL }); ```

But the `_createTab` function returns an error:

``` Uncaught Error: UserInteraction with id "browser.tabs.opening" was not initialized ```

...I guess this is by security to make this function called only by user action? And I call this function inside `async function`.

Is it somehow possible to open a new tab from the Experimental API in Firefox 115 beta? I need this very badly. Really very much.

---

I used the `loadURI` function like this:

``` window.gBrowser.selectedBrowser.loadURI(linkGo, {triggeringPrincipal: Services.scriptSecurityManager.getSystemPrincipal()}); ```

The `loadURI` function appears to still be available in Firefox's internal API, but returns an error like this:

``` TypeError: 'uri' member of CancelContentJSOptions is not an object. RemoteWebNavigation.sys.mjs:28:41 ```

How to overcome this error?

look997 於 1 年前 詢問

look997 於 1 年前 解答

  • 已解決
  • 封存

I am unable to log-in to the "Wheel of Fortune", How can I fix this

When I open "Wheel of Fortune" and click on "Log-in", nothing happens. I am unable to log-in. Using another browser, I have no problem. Anyone with a suggestion or solut… (閱讀更多)

When I open "Wheel of Fortune" and click on "Log-in", nothing happens. I am unable to log-in. Using another browser, I have no problem.

Anyone with a suggestion or solution for me?

dave 於 1 年前 詢問

cor-el 於 1 年前 解答

  • 已解決
  • 封存

All add-ons do not work after upgrade to Debian 12/Firefox 102.12.0esr (64-bit)

Hi everyone, I've installed Debian 12 with Firefox 102.12.0esr (64-bit) from scratch instead of Debian 11. Just after it I noticed that all add-ons I used for a long tim… (閱讀更多)

Hi everyone,

I've installed Debian 12 with Firefox 102.12.0esr (64-bit) from scratch instead of Debian 11. Just after it I noticed that all add-ons I used for a long time do not work anymore.

When I go to Menu > Add-ons and themes, I see all add-ons enabled. However, all of them do not work, and they even do not display their icons on the Firefox toolbar as they did before.

A couple of examples of add-ons that do not work: - Enhancer for YouTube - ImTranslator: Translator, Dictionary, TTS

I run Firefox via Firejail sandbox (like I did for years without any problems). All add-ons and settings came to my new system via Firefox sync. I tried to run Firefox directly (without Firejail) and nothing changed, add-ons still do not work. Also, I logged out of my Firefox sync account and reinstalled add-ons on Firefox running directly (without Firejail) and it did not help.

Appreciate your help - how can I enable add-ons in Firefox?

ndp124 於 1 年前 詢問

ndp124 於 1 年前 解答

  • 已解決
  • 封存

Looking For Text Insert Macro Addon?

Is there any way (or any addon) that I can insert commonly used text into a text box? I have tried AutoFill and, while it works fine for... well.. filling out forms... I … (閱讀更多)

Is there any way (or any addon) that I can insert commonly used text into a text box? I have tried AutoFill and, while it works fine for... well.. filling out forms... I cannot get it to work for what I need. Basically, I want to insert things like '¯\_(ツ)_/¯' rather than having to go to a page, select that, copy it, go back and paste it... or, worse yet ... remember and type that over and over again.

rebeltaz1 於 1 年前 詢問

cor-el 於 1 年前 解答

  • 已解決
  • 封存

Why can't I have expanded extensions on the toolbar?

Hi, I have a widescreen monitor and I really like utilizing, well, the width of it. But for the life of me I cannot take out the extension icons from the little jigsaw pu… (閱讀更多)

Hi, I have a widescreen monitor and I really like utilizing, well, the width of it. But for the life of me I cannot take out the extension icons from the little jigsaw puzzle. For instance, I'd really like Ublock Origin to be right on the toolbar and not click through the jigsaw icon. I tried setting extensions.unifiedExtensions.enabled flag to false but it did nothing.

szemawy 於 1 年前 詢問

TyDraniu 於 1 年前 解答