顯示問題標籤 顯示所有問題

How to customize picture-in-picture default size of the video?

When picture-in-picture is invoked, it opens video small window. In the past it was a super tiny window, then after some updates it increased in size, then it went small … (閱讀更多)

When picture-in-picture is invoked, it opens video small window. In the past it was a super tiny window, then after some updates it increased in size, then it went small again. The proportions of the window are also useless for most YT vids.

Basically, every time I use picture-in-picture I have to resize it. This is tirin. Is there a way to customize the start size of it like:

- set start size ...x... - remember the last size - auto-size based on the video proportions, set to 1/4 or 1/5 or 1/3, etc.

and so on.

Currently this picture in picture is more annoying then helpful because it require constant manipulation of the picture size. Annoying as hell.

Michał 於 3 個月前 詢問

Have to click twice on tabs, and menu

Hi, I have a ubuntu 20.04 machine, that I just installed. The installation came with firefox on it, no extensions. When I open my browser, it's normal to start with, but… (閱讀更多)

Hi, I have a ubuntu 20.04 machine, that I just installed. The installation came with firefox on it, no extensions.

When I open my browser, it's normal to start with, but then after a little bit, I need to click tabs twice for me to go to the page. It then sometimes go away for a few minutes, and then comes back.

Sometimes, it's just my mouse that triggers this behavior, but other times, it is both mouse and touchpad. This is not a problem that occurs when using other browsers or programs on my computer.

If I start firefox in safe mode, it's back to normal for a few minutes, but then the issue starts again.

Also, if I click "settings" in the top right, it quickly appears and disappears, making it really hard to access the settings

sejsbo 於 3 個月前 詢問

2+ minute delay on Firefox start at times with ppoll lines?

Have a strange delay that has happened a number of times that causes a delay of about 2 minutes and 40 seconds for Firefox to open on my fully updated Fedora 33 64bit sys… (閱讀更多)

Have a strange delay that has happened a number of times that causes a delay of about 2 minutes and 40 seconds for Firefox to open on my fully updated Fedora 33 64bit system? Using strace it pauses at these to times.

ppoll([{fd=10, events=POLLIN}], 1, {tv_sec=119, tv_nsec=999420000}, NULL, 8) = 1 ([{fd=10, revents=POLLIN}], left {tv_sec=46, tv_nsec=773625894}) ppoll([{fd=14, events=POLLIN}], 1, {tv_sec=119, tv_nsec=999274000}, NULL, 8) = 1 ([{fd=14, revents=POLLIN}], left {tv_sec=113, tv_nsec=850834948})

When it doesn't happen there are no lines with the ppoll information in the strace. At same time, google chrome will load in seconds, just like firefox when it is working correctly.

First time it happened was after an upgrade to latest kernel, so thought that might have been it. Rebooted system to previous kernel, but problem still occurred. Downgraded firefox to previous version, but that also resulted in no change. Checked the rpm listing, and found that nss i686 had also been updated in last pass, so did a reinstall of the nss*x86_64 files. Problem disappeared, and firefox was back to loading in seconds versus the 2 minutes and 40 seconds. (Does seem to work ok once loaded). Reloaded with latest kernel, an it still worked. Upgraded to latest firefox again, and still worked. Ran fine for a full day, but then it started doing the same. Tried the nss reinstall, but no change. Rebooted machine, no other changes, and it went back to working??

Have the strace dump file that is about 4M - line numbers that issue happens. 2687 ppoll([{fd=10, events=POLLIN}], 1, {tv_sec=119, tv_nsec=999420000}, NULL, 8) = 1 ([{fd=10, revents=POLLIN}], left {tv_sec=46, tv_nsec=773625894})

 4422	ppoll([{fd=14, events=POLLIN}], 1, {tv_sec=119, tv_nsec=999274000}, NULL, 8) = 1 ([{fd=14, revents=POLLIN}], left {tv_sec=113, tv_nsec=850834948})

Total of 57123 lines firefox.bad

A run without the errors is about 50866 lines long and has no ppoll lines??

Only seen error with firefox, so not sure if it is related to firefox or firefox with something else in system??

mikes5 於 2 個月前 詢問

Firefox update

Sorry if this has been said, i haven't been able to find it using the words i know. First of all, i'm newbie in general so if anything is missing in the explanation just … (閱讀更多)

Sorry if this has been said, i haven't been able to find it using the words i know. First of all, i'm newbie in general so if anything is missing in the explanation just let me know. My computer uses Linux ( Ubuntu 17.10).

The problems are several and are connected, i believe. Some years ago, when updating the firefox browser throught the "official app store", the name of which i only know in catalan, "programari" and haven't been able to find the analogous name right now. The update was actually an installation of firefox quantum that duplicated my Firefox browsers ( at least in icons, i had both ) as i now had the updated one and the old one, which i simply stopped using. Several problems arose in using this format , for example when i try to open from terminal Jupyter lab i needed to have already open the quantum version, otherwise it would simply open it in the old browser and that was a problem for other things not interesting here maybe. There came a moment where this new so called quantum browser stopped working, i.e. it crashed in completly white screen, while not being able to close it, and, furthermore, without being able to uninstall it, again from this app store, as everytime i tried it the app store window would just show me that it was working ( i pressed uninstall and the "cercle around" dynamic icon showed), but no matter the time i left it to finish it never did/does. Now i'm trying to, again, update the OLD firefox browser i had because it is so old ( version 61 ) that many webs can't even be used ( Netflix for example). HOWEVER, i have to say that any of the official helps to download/update firefox has been of no use for the moment. That is, the "update firefox to latest release"( https://support.mozilla.org/en-US/kb/update-firefox-latest-release) page assumes that the update will take place by just going to << Help->About firefox>>, but it doesn't; and the alternative method, using "Choose which Firefox Browser to download in your language" page ( https://www.mozilla.org/en-GB/firefox/all/#product-desktop-release) downloads me a compressed file ( in concrete firefox-88.0.tar.bz2). What is the problem with this? i haven't found a single word saying what to do after this download... i'm a newbie i only see a whole bunch of archives and files within but i don't have the Icon to press( yes, there is the firefox executable program that if you press appears the browser, but how can i place, and use, this outside the file( when i move it outside it stops working)) and so be able to use access the browser without having to go all into the downloaded file?

I know this is extremely long and i apologize for it. Here in the following i'll simply summarize the questions mentioned in hope that someone has any answer: 1) Why Firefox quantum, installed from the official app store in Linux ( it is/was the only Firefox appearing there as if it was the older version), didn't update the last version i previously had and made instead a duplicated, conflicting sometimes with the older ( Jupyter lab problem mentioned ), version. 2) Why has this Quantum browser suddenly crashed in my computer and why i can't even un-install it. 3) What is to be done with the update-downloading compressed file ( coming from https://www.mozilla.org/en-GB/firefox/all/#product-desktop-release ) as to end up with the nice-looking, usually found, firefox browser icon in the screen, instead of having to go inside the file to use it.

Many thanks to anyone being able to help this troubled-guy in his proces of not going back to google chrome and windows.

joanantichna 於 2 個月前 詢問

Adding a minimalistic sidebar

Does anyone know how to add a sidebar with just the icons (i.e. for bookmarks, history, and sync tabs) and only show the full sidebar by clicking the corresponding icon. … (閱讀更多)

Does anyone know how to add a sidebar with just the icons (i.e. for bookmarks, history, and sync tabs) and only show the full sidebar by clicking the corresponding icon. Can that be done through userChrome?

I have attached two images that illustrate what I'm trying to accomplish.

schlawiener 於 2 個月前 詢問

Plus signs when searching from adress bar

When searching for a phrase with an OpenSearch-Engine on DeepL, then plus signs "+" appear between words. You can get the Deepl Search-Engine from Mycroft. Any ideas how … (閱讀更多)

When searching for a phrase with an OpenSearch-Engine on DeepL, then plus signs "+" appear between words. You can get the Deepl Search-Engine from Mycroft.

Any ideas how to remove those plus signs in order to be able to translate phrases?

Observed on Firefox 88.0 on Ubuntu 20.10.

D 於 2 個月前 詢問

launch of Firefox

Preamble: All program updates are accepted when proposed on any of my 2 PCs, Linux or Firefox and other programs. Situation: Many multiple instances of Firefox are lau… (閱讀更多)

Preamble: All program updates are accepted when proposed on any of my 2 PCs, Linux or Firefox and other programs.

Situation:

  • Many multiple instances of Firefox are launched but can't be completed on my old (11 years old) tower PC (Linux based),
  • seems to saturate video card with multiple instances of screens (1 or 2 minutes at most) until it prevents other programs (eg Open office) to run
  • Tower PC works well for other programs (open office) if Firefox in not launched
  • while it works well when Firefox and other programs are launched) on my light PC ASUS (also with Linux) 3 years old.

Do I miss required minimal memory size on hard disk or on RAM, or is this an issue on Firefox, or...?

Can anyone please help and advise? Regards

bernard.vilain 於 2 個月前 詢問

"MOZILLA_PKIX_ERROR_CA_CERT_USED_AS_END_ENTITY" AND "MOZILLA_PKIX_ERROR_SELF_SIGNED_CERT" firefox errors codes

Hello, I use ubuntu studio live CD 20.04.1 LTS with Firefox browser. I use a Teltonika RUT240 router to access internet and for others purposes. i got 2 firefox errors co… (閱讀更多)

Hello,

I use ubuntu studio live CD 20.04.1 LTS with Firefox browser.

I use a Teltonika RUT240 router to access internet and for others purposes.

i got 2 firefox errors codes, described here after : https://community.teltonika-networks.com/32375/rut-240s-cli-not-functional-connect-potential-security-issue

What should i do to securely access my router, and to solve definitely theses 2 errors ?

Thanks for your support,

Djailz 於 2 個月前 詢問

restrict extension access permissions by url

if an extension requires an 'Access your data for all websites' permission then firefox requires me to choose either allow this extension to steal all my sensitive data, … (閱讀更多)

if an extension requires an 'Access your data for all websites' permission then firefox requires me to choose either allow this extension to steal all my sensitive data, or not to use the extension at all.

for such cases, chrome allows me to choose when and where i prefer to allow the extension to see these data and when and where to restrict it from accessing them: Site access Allow this extension to read and change all your data on websites you visit:

  • On click
  • On specific sites
  • On all sites

does firefox allow this somehow? i'd prefer to have an option to restrict such access in some cases by clicking the extension button, in some - by white or black listing specific sites (mostly whitelisting), and for some cases - do not restrict.

musilla 於 2 個月前 詢問

strange user interface appearance if I have set Firefox to remember my tabs

I have Firefox installed on an XUbuntu 20.04.2 LTS machine. preferences to "restore previous session" on startup. Intermittently, when I launch the browser, one of my wi… (閱讀更多)

I have Firefox installed on an XUbuntu 20.04.2 LTS machine. preferences to "restore previous session" on startup. Intermittently, when I launch the browser, one of my windows has a very strange appearance (please note the general look of the window in the attached screenshot and ignore the "page cannot be displayed" message, as the screenshot was taken when I was not connected to the Internet.)

I have already tried reseting Firefox and that does not make the problem go away permanently; it always comes back eventually. (Note: I cleared cache before, and cookies after, taking the screenshot but before opening this support request. So the "troubleshooting information" attached reflects how it is after cookies are cleared.)

4232jl 於 2 個月前 詢問

Improve the form "auto-fill" function

In any modern browser, if you go to https://donotcall.gov and file a complaint about a harassing robocall, if the browser's "form auto-fill" function is enabled it will a… (閱讀更多)

In any modern browser, if you go to https://donotcall.gov and file a complaint about a harassing robocall, if the browser's "form auto-fill" function is enabled it will automatically "remember" the phone number about which you filed the complaint and save the robo-caller's number for the next time you use a Web form that prompts for a phone number.

My suggestion is that Firefox should not do this.

You might argue that I should address my complaint to the website's owner, but you all know it's the government and I figured that the Firefox developer community might be able to come up with a solution. Think of it as an improvement by which Firefox can be made "better" than other browsers.

4232jl 於 2 個月前 詢問

Problem with video player.

I use Firefox on both Windows 10 and Ubuntu OS. However, when I use Firefox on Ubuntu and try to play a video from google drive I can hear the audio (sometimes) while the… (閱讀更多)

I use Firefox on both Windows 10 and Ubuntu OS. However, when I use Firefox on Ubuntu and try to play a video from google drive I can hear the audio (sometimes) while the screen remains black. What will be the solution?

Ahsan 於 2 個月前 詢問

Firefox Print Preview produces no output for Brother HL-L2350DW network printer.

Printing from Firefox (v88.0.1 64-bit) on linux (Ubuntu 20.04 LTS) to a Brother HL-L2350DW network printer using "Print Preview" produces no output on the printer. Cups a… (閱讀更多)

Printing from Firefox (v88.0.1 64-bit) on linux (Ubuntu 20.04 LTS) to a Brother HL-L2350DW network printer using "Print Preview" produces no output on the printer. Cups appears to produce expected files in the spool directory; the printer wakes up, but goes back to sleep after a normal timeout. Printing the same page with "Print using system dialog" works perfectly. Printing the same page to other (networked) printers using either "Print Preview" or "Print using system dialog" works perfectly. Printing from Firefox (v88.0.1 64-bit) on Windows 10 to the same Brother HL-L2350DW network printer using either "Print Preview" or "Print using system dialog" works perfectly.

ctgarrenton 於 2 個月前 詢問

Latest Update errors

All FYI, The latest update from FireFox, on my Kubuntu 18.04 LTS server, disconnected and disabled all my networking, at least I thought so. Rebooting did not help! Run… (閱讀更多)

All FYI,

The latest update from FireFox, on my Kubuntu 18.04 LTS server, disconnected and disabled all my networking, at least I thought so. Rebooting did not help! Running test I could not ping www.google.com, but found I could ping any direct IP, thus Google's DNS server: 8.8.8.8 would ping. Checking I found that the update had disabled dhclient, so re-installed dhclient then ran:

  dhclient <active port>

Used ifconfig to find the active port and now back to working.

Hate it when the developer idiots do not follow the legally mandated "Must Test" laws. Always causes problems when they do not follow the laws!

Cheers!

TBNK

tbotnik 於 2 個月前 詢問

Widevine Content Decryption Module completely missing

Hello. I am using a Raspberry Pi 400, which is 64-bit, but Mozilla Firefox automatically downloaded version 78.10.0esr (32-bit), and when I look in 'add-ons' and then 'pl… (閱讀更多)

Hello.

I am using a Raspberry Pi 400, which is 64-bit, but Mozilla Firefox automatically downloaded version 78.10.0esr (32-bit), and when I look in 'add-ons' and then 'plugins' in order to access the Widevine Content Decryption Module provided by Google Inc., it isn't there. It is not mentioned anywhere at all, and so I am unable to watch Channel 4, which requires I enable DRM content.

Please help? Thanks.

email.me.safely 於 2 個月前 詢問

Sync seems to ignore local paths file:///home for example. How to include these?

One of my uses of Firefox is as a tabbed reader. So I will have arxiv pdfs open, local pdfs etc. I would like to Sync these views across devices. It seems that Sync ignor… (閱讀更多)

One of my uses of Firefox is as a tabbed reader. So I will have arxiv pdfs open, local pdfs etc. I would like to Sync these views across devices. It seems that Sync ignores any local tabs. For example file:////home/me/books/this_great_books.pdf

I suspect this is to avoid syncing settings files. But is there a simple path-based over-ride for this?

Or perhaps another extension would solve this.

david.cottrell 於 2 個月前 詢問

I can't play videos directly from OneDrive

As i said in the title I can't play videos directly from OneDrive so i'm forced to use a chromium based browser only for that , i tried to make it work even in private mo… (閱讀更多)

As i said in the title I can't play videos directly from OneDrive so i'm forced to use a chromium based browser only for that , i tried to make it work even in private mode and a fresh firefox installation without any results

Mr Robot 於 2 個月前 詢問

Drag and drop a file to firefox is superslow

I'm running Firefox nightly 90.0a1 on Linux. When every time I drag file to a upload zone in any websites' uploading area, I have to hold left mouse button for 5-10 seco… (閱讀更多)

I'm running Firefox nightly 90.0a1 on Linux. When every time I drag file to a upload zone in any websites' uploading area, I have to hold left mouse button for 5-10 seconds to get response from that area, then I can upload my file.

wiki_the_best 於 2 個月前 詢問