顯示下列標籤的問題: 顯示所有問題
  • 已解決
  • 封存

Firefox does not read system proxy settings on Ubuntu linux

i am using latest firefox (106.0.5, snap) in ubuntu 22.10 64 bit. i have set ubuntu network setting to manual and have set socks proxy there (socks host: 127.0.0.1 port: … (閱讀更多)

i am using latest firefox (106.0.5, snap) in ubuntu 22.10 64 bit. i have set ubuntu network setting to manual and have set socks proxy there (socks host: 127.0.0.1 port: 2345). while other browsers can connect through system socks proxy, firefox is unable to connect it. i have changed and tested different configs in firefox network menue but no one was helpful. i have also try to solve the problem using foxyproxy addins but it does not correct as expected. sometimes it connects and many time it does not. what is the firefox problem with socks proxy? how can i solve that? thx.

MrAli 於 1 年前 詢問

MrAli 於 1 年前 解答

  • 已解決
  • 封存

All tabs are crashing and show the message 'Gah. Your tab just crashed'

I am using firefox v104 on linux mint. This problem happened this evening. Every tab i open shows the same error. I tried the solutions suggested in other similar forum… (閱讀更多)

I am using firefox v104 on linux mint. This problem happened this evening. Every tab i open shows the same error.

I tried the solutions suggested in other similar forum posts like >safemode (tabs still crashed) >driver update (my drivers are up to date as far i can tell) >deleting cache and reinstalling firefox (tabs crash). I took a backup of my bookmarks and extensions as suggeated in another forum post. > one youtube video (https://youtu.be/F9VaXwSB_po) suggested toggling media.cubeb.sandbox in the config section. The tabs started loading after that but it wasnt that useful as i wasnt able to get any videos to play in the browser.

Also, i don't really know if the issue is related, but chrome tabs were also not loading or responding ('Page unresponsive' error).

Please help. Thank you :)

Vaghar 於 1 年前 詢問

Vaghar 於 1 年前 解答

  • 已解決
  • 封存

Customize Firefox: unable to add extension into toolbar

Hello, I have more than 30 extensions, but I cannot add an extension shortcut into my toolbar and no extension appears in the “Customize Firefox” view. I tried “Restore … (閱讀更多)

Hello,

I have more than 30 extensions, but I cannot add an extension shortcut into my toolbar and no extension appears in the “Customize Firefox” view. I tried “Restore defaults” without any effects...

There is a way to fix this issue or run Firefox in verbose mode to more information why my extensions don't appear here? (Other than restart from a new fresh profile if it's possible…). I confirm that all the extensions are functional and activated. Thanks,

Emeric

Emeric Verschuur 於 1 年前 詢問

TyDraniu 於 1 年前 解答

  • 已解決
  • 封存

geo.provider.network.url no longer works

Noticed geo.provider.network.url setting in about:config no longer works in firefox 102.0 ubuntu. I use it consistently so it was easy to notice that it no longer had any… (閱讀更多)

Noticed geo.provider.network.url setting in about:config no longer works in firefox 102.0 ubuntu. I use it consistently so it was easy to notice that it no longer had any effect after updating.

tested both on https://maps.google.com and https://browserleaks.com/geo

Is it possible to revert to an older version without losing my data?

tel2 於 1 年前 詢問

tel2 於 1 年前 解答

  • 已解決
  • 封存

[SOLVED] cannot save page/file to local drive

Hi, I'm using version 101.0.1 (64 bit) for Ubuntu 22.04. When I open a link of a pdf file, the file is displayed in the built-in viewer, since I chose "Open in Firefox" i… (閱讀更多)

Hi, I'm using version 101.0.1 (64 bit) for Ubuntu 22.04. When I open a link of a pdf file, the file is displayed in the built-in viewer, since I chose "Open in Firefox" in my settings. But then if I click the download icon nothing happens. If I click the print icon and choose "print to pdf" in the popup, then clicking on "save" does nothing and I have to click "cancel" to dismiss the popup.

Actually there is no way to save a pdf file but setting PDF app to "Ask always" and then open it with "System handler", but then the file is saved into the default download folder, even though I selected the checkbox "Always ask me where to save files" in my settings.

EDIT: the issue was solved by installing the following packages, as shown in this question :

xdg-desktop-portal xdg-desktop-portal-gtk

gi4c0ph 於 1 年前 詢問

jscher2000 - Support Volunteer 於 1 年前 解答

  • 已解決
  • 封存

private browsing window is a different color now

After an update today, private browsing windows now are a different color than the other windows. I don't want them to be a different color. How do I change them back to … (閱讀更多)

After an update today, private browsing windows now are a different color than the other windows. I don't want them to be a different color. How do I change them back to the same as the other windows?

Also, how do I remove the extra text label next to the private mode icon, and just generally put things back to the way they used to look?

Sterrence 於 1 年前 詢問

cor-el 於 1 年前 解答

  • 已解決

Cloudflare challenges only work in incognito (with all extensions)

I've been having an issue for a while now where the cloudflare challenges that ask you to click the check mark to "verify your connection is secure" would just endlessly … (閱讀更多)

I've been having an issue for a while now where the cloudflare challenges that ask you to click the check mark to "verify your connection is secure" would just endlessly ask me to click the button and never continue. Sometimes it would say to unblock access to challenges.cloudflare.com.

But if I a launch an incognito window I can visit website with the challenge and it won't even ask! I've added all my extensions to run in incognito mode and everything still works, I can visit the websites in incognito just fine. So the one changing variable is incognito vs non-incognito.

I can have two windows open, one incognito and one not, and browse to the same website and the non-incog window will fail but the incog will just go to the site.

I thought incognito was supposed to only affect the session storage? Does it silently change other things to the running environment of the browser (about:config options, slightly different extension configs)?

Anyone know why this small change would suddenly allow cloudflare challenges to work?

txrxnet 於 5 個月前 詢問

txrxnet 於 5 個月前 解答

  • 已解決
  • 封存

All my addons "Could not be verified for use in firefox and has been disabled" (just seen today)

Hi everyone, I am running Firefox 91.5 on Red Hat Enterprise Linux 8.5 and just noticed that all my addons have been disabled and can't re-enable them. Some of them are… (閱讀更多)

Hi everyone,

I am running Firefox 91.5 on Red Hat Enterprise Linux 8.5 and just noticed that all my addons have been disabled and can't re-enable them.

Some of them are quite common modules such as Disconnect or Privacy Badger, so wondering what this may be.

There is a similar post on this forum dating back to 2019 and it mentioned a fix on Firefox was to be developped.

Anyone experiencing the same issue at the moment.?

Please see attached screenshot.

Kind regards,

Alex

Alex_Pk 於 2 年前 詢問

Alex_Pk 於 2 年前 解答

  • 已解決
  • 封存

Videos freeze when scrubbing back

For a few months, I have encountered an issue with videos playback on my browser. On most websites (including Reddit, Dailymotion, and even some videos on YouTube), whene… (閱讀更多)

For a few months, I have encountered an issue with videos playback on my browser. On most websites (including Reddit, Dailymotion, and even some videos on YouTube), whenever I scrub back a video, it will stop for about ten seconds, while the audio keeps playing.

My current extensions are: Metamask, Bionic Reader, uBlock Origin, Return Youtube Dislike, and TWP Translate Web Pages. I have tried using Troubleshooting mode, but the problem persisted, so I think it's not because of my extension.

My OS is Opensuse Tumbleweed, with Firefox version 155.0.3. I didn't have this issue with Firefox ESR on my previous Debian 11 installation. I hope someone can find a solution for this, as it is extremely troublesome switching to Chrome whenever I want to watch videos.

xuantung.trinh.63 於 6 個月前 詢問

zeroknight 於 6 個月前 解答

  • 已解決
  • 封存

Firefox is popping up a small pop-up asking for a password.

Everything under Logins and Passwords, and Forms and Autofill is unchecked. A "Primary Password" has never been set in firefox. Can't get it to stop asking, which is ma… (閱讀更多)

Everything under Logins and Passwords, and Forms and Autofill is unchecked. A "Primary Password" has never been set in firefox.

Can't get it to stop asking, which is made worse by the fact that nothing is selected to prompt it nor is anything stored for it to use.

Shawn.Janson 於 9 個月前 詢問

jscher2000 - Support Volunteer 於 9 個月前 解答

  • 已解決
  • 封存

userChrome

There is no userChrome.css in my profile. If it needs to be created, where do I create it? Yes, I searched for help. What I found was about userChrome.css to solve spec… (閱讀更多)

There is no userChrome.css in my profile.

If it needs to be created, where do I create it?

Yes, I searched for help. What I found was about userChrome.css to solve specific problems, but not what to do if it doesn't exist. Is userChrome still supported?

Thank you! Mark.

Mark Filipak 於 1 年前 詢問

Mark Filipak 於 1 年前 解答

  • 已解決
  • 封存

Duckduckgo opens links as https://html.duckduckgo.com/html

Hi, I'm using Duckduckgo as my search engine, but when I type in a search string, it Firefox prepends it with https://html.duckduckgo.com/html/... This opens a search p… (閱讀更多)

Hi,

I'm using Duckduckgo as my search engine, but when I type in a search string, it Firefox prepends it with https://html.duckduckgo.com/html/... This opens a search page that doesn't follow my dark theme. When I click on a link, another link is added that creates a link back to the same URL, causing a loop. This never happened before I upgraded to Ubuntu 22.04 & the latest version of Firefox, 100.0.2. How can I change this back?

Thanks!

   -John

jlcenter 於 1 年前 詢問

jlcenter 於 1 年前 解答

  • 已解決
  • 封存

How to disable all address bar features ?

I have found a few pages about address rewriting; how do I disable them all ? - searching single word into google (type "keyw" in about:config to disable it) - hidin… (閱讀更多)

I have found a few pages about address rewriting; how do I disable them all ? - searching single word into google (type "keyw" in about:config to disable it) - hiding http when not using https - trying to add "www" and ".com" around a single word when the word did not resolve

I consider most of them as security issues for various reasons.

And when editting an URL, I want firefox to keep showing the full url as it was invoqued; not add https randomly, or removing http other days. And the more I disable some, the more new ones appear.

Benoit-Pierre DEMAINE 於 1 年前 詢問

cor-el 於 1 年前 解答

  • 已解決
  • 封存

Video stopped working

I upgraded Firefox to 109.0 on OpenSUSE Linux today as an update. Firefox no longer plays videos. Chrome is still playing the videos, so the codecs are on my machine. … (閱讀更多)

I upgraded Firefox to 109.0 on OpenSUSE Linux today as an update. Firefox no longer plays videos. Chrome is still playing the videos, so the codecs are on my machine. Is there anything I can do to fix this?

jay.treiman 於 1 年前 詢問

jonzn4SUSE 於 1 年前 解答

  • 已解決
  • 封存

rumble video is not visible on a webpage

The rumble video interview of Jonathan Cahn by Greg Hunter is NOT visible in my linux version 91.12.0esr(64-bit) of Mozilla Firefox, straight from an openSuse software re… (閱讀更多)

The rumble video interview of Jonathan Cahn by Greg Hunter is NOT visible in my linux version 91.12.0esr(64-bit) of Mozilla Firefox, straight from an openSuse software repository and directly installable under yast, which is their administrator program over the linux software including the software manager

The web page in question is https://usawatchdog.com/only-way-to-save-america-is-turn-back-to-god-jonathan-cahn/ but the java script code is grayed out on this page

!function(r,u,m,b,l,e){r._Rumble=b,r[b]||(r[b]=function(){(r[b]._=r[b]._||[]).push(arguments);if(r[b]._.length==1){l=u.createElement(m),e=u.getElementsByTagName(m)[0],l.async=1,l.src="https://rumble.com/embedJS/ugdmvn"+(arguments[1].video?'.'+arguments[1].video:)+"/?url="+encodeURIComponent(location.href)+"&args="+encodeURIComponent(JSON.stringify([].slice.apply(arguments))),e.parentNode.insertBefore(l,e)}})}(window, document, "script", "Rumble");

I have used other browsers, such as Opera, Brave, Google Chrome and the rumble video is clearly visible and playable.

What do I have to change in Firefox so that this video becomes visible on the page?

Randall

p.s. Greg Hunter is interested in this reply too

website.reader3 於 1 年前 詢問

jonzn4SUSE 於 1 年前 解答

  • 已解決
  • 封存

Monospace font not being chosen correctly when font-family starts with missing fonts

I've just started noticing in Firefox 99 on Arch Linux that Firefox is using the wrong font when the font-family is given as "ui-monospace/other fonts..., monospace". Thi… (閱讀更多)

I've just started noticing in Firefox 99 on Arch Linux that Firefox is using the wrong font when the font-family is given as "ui-monospace/other fonts..., monospace". This looks similar to the issue mentioned here: https://support.mozilla.org/en-US/questions/1351497

The inspector for these websites underlines "monospace" as the active font, but then uses a non-monospace font (in my case, Bitstream Vera Sans) to display the content. This does not happen when the font-family is "monospace,monospace" or "monospace". I can't quite figure out exactly what causes the font to be chosen incorrectly: sometimes it does show up if I have the preceding fonts installed, e.g. Consolas or Liberation Mono, but other instances do not look as intended.

Currently, I have fontconfig set up such that: $ fc-match :family=ui-monospace VeraMono.ttf: "Bitstream Vera Sans Mono" "Roman" $ fc-match :family=monospace VeraMono.ttf: "Bitstream Vera Sans Mono" "Roman"

Firefox's fonts in about:preferences are configured as all defaults: Serif: Bitstream Vera Serif Sans: Bitstream Vera Sans Monospace: Bitstream Vera Sans Mono

Tim Alberdingk Thijm 於 1 年前 詢問

Tim Alberdingk Thijm 於 1 年前 解答

  • 已解決
  • 封存

Mozilla Firefox snap for Ubuntu changes browser.opaqueResponseBlocking

Why does the Mozilla Firefox snap for Ubuntu keep changing the value of browser.opaqueResponseBlocking away from the default and selected FALSE setting to TRUE? This make… (閱讀更多)

Why does the Mozilla Firefox snap for Ubuntu keep changing the value of browser.opaqueResponseBlocking away from the default and selected FALSE setting to TRUE? This makes Firefox nearly unusable since the streaming video keeps being cut off when Mozilla Firefox snap for Ubuntu keeps changing the value of browser.opaqueResponseBlocking randomly during use. Specifically this is the 116.0.2 (64-bit) Mozilla Firefox snap for Ubuntu canonical-002 - 1.0 that is installed with Ubuntu 23.04. Please advise.

mozilla414 於 6 個月前 詢問

mozilla414 於 5 個月前 解答

  • 已解決
  • 封存

How to use system GTK3 theme in Firefox 102 ESR?

Setting `widget.non-native-theme.enabled` to false no longer works; I still get Firefox's default styling for controls and widgets. I use a custom GTK3 theme in my envir… (閱讀更多)

Setting `widget.non-native-theme.enabled` to false no longer works; I still get Firefox's default styling for controls and widgets.

I use a custom GTK3 theme in my environment that I want to apply to Firefox. The above setting works in 91 ESR, and broke with the upgrade to 102 ESR.

A custom user chrome stylesheet would be too painful.

Note: You can revert page styling to defaults in View -> Page Style -> No Style.

102.1.0esr, Debian testing, Xfce 4.16

- 於 1 年前 詢問

cor-el 於 1 年前 解答