顯示下列標籤的問題: 顯示所有問題

Firefox-esr/ Firefox jumps back to page beginning while scrolling, not solved

I have followed the troubleshooting suggestions with no avail. I am currently in troubleshooting mode with all add-ons disabled. The problem persists. The only way to han… (閱讀更多)

I have followed the troubleshooting suggestions with no avail. I am currently in troubleshooting mode with all add-ons disabled. The problem persists. The only way to handle the problem is to depress the scroll wheel on the mouse and start scrolling. However, the problem returns with the next page. The problem shows up on Windows 10 as well as Debian bullseye.

I have used Firefox and Firefox-esr for years on the same platforms. This problem started about six months ago with no resolution. So what has changed? On Win 10 Firefox keeps getting updates whereas Firefox-esr never gets updates. The problem persists on both platforms. More than one mouse has been used with the same results. I have removed Firefox and Firefox-esr and re loaded them, no joy here either.

meparsons 於 44 分鐘前 詢問

zeroknight 最近回覆於 31 分鐘前

Firefox hangs after switching between virtual terminals (Linux)

Hi, I like to use separate user accounts / X sessions for work and personal stuff. Whenever I switch from one session to another (ctrl+alt+Fx), it usually takes a few mi… (閱讀更多)

Hi,

I like to use separate user accounts / X sessions for work and personal stuff. Whenever I switch from one session to another (ctrl+alt+Fx), it usually takes a few minutes for Firefox to get responsive again. Sometimes it never does (typically on Mondays, after working in my "personal" session all week end, and switching back to my "work" session). Other applications (xterm, qpdfviewer, etc...) don't seem to be affected at all. Is there something I can do to fix that ?

Thanks,

 -Olivier.

oprs 於 3 小時前 詢問

  • 封存

Disabling Control +w keybind

Could you add a option of closing tab with <kbd>Ctrl</kbd>+<kbd>w</kbd> to the advanced preference? Also, I realized that: ```browser.tabs.warnO… (閱讀更多)

Could you add a option of closing tab with <kbd>Ctrl</kbd>+<kbd>w</kbd> to the advanced preference?

Also, I realized that:

```browser.tabs.warnOnClose False``` Does this option activates warn when closing the tab? If your answer is yes, it is not working at all.

maxemilian 於 1 年前 詢問

wtfiwinomgs 最近回覆於 1 年前

Enable pop-ups on a case-by-case basis

I have run into an annoyance where I am trying to click on a link in my email to open a new page. Clicking on the link makes a bar show up telling me that Firefox has pre… (閱讀更多)

I have run into an annoyance where I am trying to click on a link in my email to open a new page. Clicking on the link makes a bar show up telling me that Firefox has prevented a popup from being opened (see attached image). I am given the option of managing my preferences / Firefox settings, where I can either go through multiple steps to permanently allow all pop-ups from that website until I restore my original settings, or uncheck a box to permanently allow all pop-ups from all sites until I check that box again. This is annoying because I have no interest in either allowing or disallowing all pop-ups from all websites, or all pop-ups from this specific website, every time I want to open a single pop-up from a specific site. I would rather that the warning bar which tells me that Firefox has blocked a pop-up also display a button allowing me to allow ONLY THIS SPECIFIC POP-UP IN THIS SPECIFIC CASE.

Is this a setting that exists in Firefox? Alternatively, is there a version of Firefox which does have a setting which would allow this? Or is this simply not a functionality that exists for this browser?

Tiggy Chen 於 5 個月前 詢問

zeroknight 最近回覆於 5 個月前

  • 封存

foxy proxy

Hello! I want to work with burp suit application but for work with it the foxy proxy need. when I turned on the foxy proxy it always gives me different kind of error mess… (閱讀更多)

Hello! I want to work with burp suit application but for work with it the foxy proxy need. when I turned on the foxy proxy it always gives me different kind of error messages such ass "The proxy server is refusing connections". I tried everything I could but to no avail.

g10821.chamila 於 1 年前 詢問

FredMcD 最近回覆於 1 年前

  • 封存

Choose URL for enabling pop-ups

I suspect that my bank tried to show a verification pop-up while I was on a third-party site, and because pop-ups were disabled the third party rejected my request. My qu… (閱讀更多)

I suspect that my bank tried to show a verification pop-up while I was on a third-party site, and because pop-ups were disabled the third party rejected my request. My question is:

How much of my bank's website address do I need to put in the "Allowed Web Sites - Pop-ups" edit box, seeing as I wasn't on that website at the time. Would "https://name-of-bank.com" be sufficient? Or, are wildcards allowed in the URL?

john.beatty 於 1 年前 詢問

cor-el 最近回覆於 1 年前

  • 封存

Unable to install Firefox for Chromebook

I just got a chromebook from my work, and I'm unable to install firefox. I've tried searching for firefox download and clicked on the top result from Mozilla, but once it… (閱讀更多)

I just got a chromebook from my work, and I'm unable to install firefox. I've tried searching for firefox download and clicked on the top result from Mozilla, but once it has finished downloading, I try clicking on the freshly downloaded folder but that just lets me see the folders and files within the big folder. I haven't had this experience before when trying to download firefox, but I'm also fairly new to using a chromebook. So I'm not sure if my issue is with the chromebook/OS, or maybe since it's through my work, I'm limited in what apps I can download? Any advice would be greatly appreciated. I'll do my best to attach a screenshot of the folder that appears.

rocksofshame 於 1 年前 詢問

Paul 最近回覆於 1 年前

  • 封存

How do I enable JavaScript on Firefox browser?

I'm trying to migrate from Chrome to Firefox browser. I cant load Twitter and some other links. I get error message. JavaScript not enabled. I can't find a setting anywhe… (閱讀更多)

I'm trying to migrate from Chrome to Firefox browser. I cant load Twitter and some other links. I get error message. JavaScript not enabled. I can't find a setting anywhere to enable it. Help!!

ispwllheli 於 10 個月前 詢問

cor-el 最近回覆於 10 個月前

  • 封存

Cannot find "share" function for sharing tabs/webpages/urls

I'm having a problem sharing websites with others via, for instance, Signal. Telegram, WhatsApp or a social medium. There used to be a share button in the toolbar, but th… (閱讀更多)

I'm having a problem sharing websites with others via, for instance, Signal. Telegram, WhatsApp or a social medium. There used to be a share button in the toolbar, but this I cannot find anymore. At some time there were also the three dots in the address bar that dropped down a menu for the page, which included a 'share' option. These dots seem to have vanished. Also I vaguely remember that the "share" function was also in he tab context menu once upon a time. However dropping down that menu does not reveal any "share" function presently. Then there was, if I remember correctly, the possibility to click the File menu at the top of the screen and then click on the Share menu item over there. But also there the "share" function seems to have vanished. I also looked in the settings menu, to find if there is a setting there which switches on or off the sharing function. I could not find such a setting. In short, it seems that I am horribly overlooking the "share" function. Please help me find it. Thanks. (Firefox 112 for Manjaro Linux)

Gijsbertus 於 11 個月前 詢問

jonzn4SUSE 最近回覆於 11 個月前

  • 封存

Can't Download Any File from Mozilla Firefox (Ubuntu 22.04.1)

Hi! I have encountered this really annoying problem on my Firefox app. I give details below. I installed Mozilla Firefox on my freshly installed Ubuntu 22.04.1 LTS. I tr… (閱讀更多)

Hi!

I have encountered this really annoying problem on my Firefox app. I give details below. I installed Mozilla Firefox on my freshly installed Ubuntu 22.04.1 LTS. I tried installing it from Snap Store. However, when I tried saving an image from the web (or, truthfully, any other file chosen by the "Save As..." selection), nothing happened, again and again. I tried many things, including following relevant guides from the internet, but nothing changed. The Firefox version is the 107.0.1 (64-bit), a Mozilla Firefox Snap for Ubuntu canonical-002- 1.0. I, also, have to report some other things, as well. When tried installing the browser from the internet (I downloaded a compressed file, containing the executable), the same function seemed to work. I, now, use the executable to access Firefox. However, firstly, because other difficulties (not problems, but difficulties) arise and, secondly, because I'd really like ti use, mostly, snaps, I report this bug here requesting for help, as well.

Any helpful answer will be appreciated!

Thank you!

Elias Myserlis 於 1 年前 詢問

cor-el 最近回覆於 1 年前

  • 封存

Error code: SSL_ERROR_UNSUPPORTED_VERSION

Hello Firefox Support, I need help to upgrade the version of the security protocol that enables access to my NAS unit. Now the message; "Secure Connection Failed An erro… (閱讀更多)

Hello Firefox Support, I need help to upgrade the version of the security protocol that enables access to my NAS unit. Now the message;

"Secure Connection Failed An error occurred during a connection to 192.168.1.201. Peer using unsupported version of security protocol. Error code: SSL_ERROR_UNSUPPORTED_VERSION

   The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
   Please contact the website owners to inform them of this problem.

This website might not support the TLS 1.2 protocol, which is the minimum version supported by Firefox."

indicates I no longer can access my page until I find the remedy to this issue. Thank you in advance for cooperation and help with is matter.

donaldrshaffer 於 1 年前 詢問

cor-el 最近回覆於 1 年前

  • 封存

Warning: Potential Security Risk Ahead

For Securing my Apache server i have created a CA and from that CA i have created a self-signed certificate. When i add the certificate to the certificate manager and try… (閱讀更多)

For Securing my Apache server i have created a CA and from that CA i have created a self-signed certificate. When i add the certificate to the certificate manager and try to access my domain with https i am getting this warning 'Warning: Potential Security Risk Ahead'. My certificate has enough validation. How can i get rid of this warning.

shiam.mahmud01 於 8 個月前 詢問

Medhasree Suram 最近回覆於 8 個月前

  • 封存

Firefox password sync causes crash? [Ubuntu Focal]

Brand new installation of Ubuntu Focal (on an ARM Chromebook, using Crouton). Installed Firefox (104), runs fine but as soon as I sign into my Firefox account it immediat… (閱讀更多)

Brand new installation of Ubuntu Focal (on an ARM Chromebook, using Crouton). Installed Firefox (104), runs fine but as soon as I sign into my Firefox account it immediately crashes. Continues to crash if I start in safe-mode, so I don't think the problem is an extension. After some online research and some trial and error I seem to have determined that I can sign into my Firefox account as long as password sync is disabled. But as soon as I enable password sync, Firefox immediately crashes.

Error message in terminal is always about GPU, which maybe isn't properly set up or maybe Firefox has a problem with it, but if I use the software renderer it doesn't cause a problem (MOZ_ENABLE_WAYLAND=0 firefox). Hard to imagine that this has anything to do with crashing when syncing passwords?

Crash Annotation GraphicsCriticalError: |[0][GFX1-]: No GPUs detected via PCI (t=2.77546) [GFX1-]: No GPUs detected via PCI Crash Annotation GraphicsCriticalError: |[0][GFX1-]: No GPUs detected via PCI (t=2.77546) |[1][GFX1-]: glxtest: process failed (received signal 11) (t=2.77573) [GFX1-]: glxtest: process failed (received signal 11) Missing chrome or resource URL: resource://gre/modules/UpdateListener.sys.mjs Exiting due to channel error. Exiting due to channel error. Exiting due to channel error. Exiting due to channel error. Crash Annotation GraphicsCriticalError: |[C0][GFX1-]: Receive IPC close with reason=AbnormalShutdown (t=3.29811) Exiting due to channel error. Segmentation fault (core dumped)

mc510 於 1 年前 詢問

jonzn4SUSE 最近回覆於 1 年前

  • 封存

Widevine plugin not installing

I installed Firefox-ESR on my Raspberry PI and noticed that I cannot play Udemy videos. After some research I found that the Widevine plugin is missing and the OpenH264 V… (閱讀更多)

I installed Firefox-ESR on my Raspberry PI and noticed that I cannot play Udemy videos. After some research I found that the Widevine plugin is missing and the OpenH264 Video Codec is also not installed. Following the instructions from similar issues didn't solve the problem. I ticked off and on the "Play DRM-controlled content" button but this only brings the widevine plugin for a moment and after that it disappears. In the network tab I see no activity when click on this button, i.e. Firefox does not send requests.

Additionally the OpenH264 Video Codec is not installed and never installs.

Any ideas how to solve this?

v.grozev 於 7 個月前 詢問

jscher2000 - Support Volunteer 最近回覆於 7 個月前

  • 封存

link to open in new tab instead of new window

I went to settings and set firefox to open links in a NEW TAB instead of a new window, but it still opens links in a new window. I did a search on google and when I click… (閱讀更多)

I went to settings and set firefox to open links in a NEW TAB instead of a new window, but it still opens links in a new window. I did a search on google and when I click on the link for the website to see the information it is still opening in a new window. How can I fix this so I don't have a lot of new windows. It's irritating to have to close all those stinking windows just to get back to my original window. I just want the links I click on to open in a new tab.

beachcomber.paradise 於 1 年前 詢問

jscher2000 - Support Volunteer 最近回覆於 1 年前

  • 封存

Which files I need to recover my password?

Hi everybody this will be a long question, and I would be really grateful for any kind of help anyone could give me, this is my case: I use `firefox-sync` to manage all … (閱讀更多)

Hi everybody this will be a long question, and I would be really grateful for any kind of help anyone could give me, this is my case:

I use `firefox-sync` to manage all my logins information and firefox-sync's password is the unique password I save manually.

Currently I has problems with my O.S and I decided reinstall it. But also I have 2FA enable for mostly of my accounts, and firefox-sync is not the exception, and firefox-sync's 2FA is based on my gmail, so when I tried get logged on firefox-sync, firefox asks me for my verification code, but my verification code is in my gmail, and my gmail's password is in firefox-sync.

So I lost access to all my accounts, I lose my gmail, github, gitlab, stackoverflow, discord, etc etc... :'(

From the gmail side, I tried all that gmail let me try but unsuccessfully.

So, the only possibility that I see, is recover the information of the formatted partition and rebuild the previous state of Firefox. I mean:

Reading about firefox loggins, and taking a look to firefox's workdir (`$HOME/.mozilla`), I see firefox saves login's info in a json file located in `$HOME/.mozilla/$profile$/logins.json`.

So the basic idea is with a data recovery tool, try recover `.mozilla`s directory and replace it over the current environment so when I start firefox can get access to my login's info. But I'm not sure how much it is possible to recover the whole directory, and if is not posible, my question is:

What files next to `logins.json` should be my recovery targets to replace inside the `.mozilla` folder in order to reconstruct my accounts login information?

04l3xxxx 於 1 年前 詢問

cor-el 最近回覆於 1 年前

Live video reproduction isssues.

Hello, I've got a reproduction issue on France TV live programs which I watch through nordvpn. The picture keeps "jumping" fast up and down in a very bothering way. This … (閱讀更多)

Hello, I've got a reproduction issue on France TV live programs which I watch through nordvpn. The picture keeps "jumping" fast up and down in a very bothering way. This doesn't happen when the video is NOT live. I run the latest version of LINUX MINT. What can I do to fix it? The only way I found to stop the issue is to take down the resolution of the live video to its minimum which gives me a disastrous picture but stops the "jumping". I guess you might say there is something wrong with my GPU. The point is that my PC is brand new with an AMD 5600G, new MB, 16Gb of RAM and 500w of PSU. BUT more than anything I have to say that everything WORKS FINE with CHROME. I like FIREFOX I have been using it literally for decades now. (I'm 75). Is there a solution? Looking forward to hearing from you. Thanks in advance. François.

Frank Rassiga 於 4 個月前 詢問

zeroknight 最近回覆於 4 個月前