顯示問題標籤 顯示所有問題

Sending/Sharing YouTube Video To Email Address

Hello, First, I am not computer savvy! When I attempt to share a YouTube video with an email, a message appears saying (This file does not have a program associated… (閱讀更多)

Hello,

  First, I am not computer savvy! 
  When I attempt to share a YouTube video with an email, a message appears saying  (This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.) 
   If there is help available, I'm all ears and very Thankful!!! 
                                                                                                  JSCL

johnlyke 於 3 小時前 詢問

Picture-in-Picture module loses time.

I'm streaming video a lot in the PiP breakout window while reading other web pages. I think it's a great feature and I've seen some improvements in the UI over time. I wa… (閱讀更多)

I'm streaming video a lot in the PiP breakout window while reading other web pages. I think it's a great feature and I've seen some improvements in the UI over time. I was hoping this problem would have been fixed in the latest update or noticed by someone either in development or another user at some time, but I could find no reference to it when searching the help pages.

When the video is playing in the window, everything works fine. Except when I'm watching something like a live broadcast that has breaks in it for commercials. My practice is to keep an eye on the video playing when I've muted the tab, while I continue my reading in other tabs. When the program comes back on in the PiP, I unmute (demute??) the tab and usually return the picture to the host tab, then go full screen.

At least half the time I do that, the navigation bar - where you can stop/start the play, go forward/back 10 seconds, and where you see the red "LIVE" notification or how many minutes/seconds you are behind the LIVE stream - shows that my program is now minutes behind the LIVE point. The funny thing is, it doesn't do it consistently and I have tried several things to figure out if it's something I'm doing. But there is no rhyme or reason why it's happening. It did this when I had Windows 8, and continued after I installed Windows 10.

For a three or four minute break, I will lose perhaps two or three minutes. I suppose that if I left it in the PiP configuration and just let the program play for the two or three hours it would take for the duration, the time would slip maybe as much as forty five minutes to an hour. Typing this statement now is going to push me to try it next time for an observable result. Again, though, it doesn't happen every time.

My guess is that, for some reason, video frames are being dropped when it's in PiP mode and instead of 30 fps it's only delivering 15 fps. (If 30 fps is what's normal.) I do not have this slippage when I maintain the picture in the standard size video box or when it's full screen. So yeah, as I'm thinking more about it, a distinct possibility is that the frames per second is reduced for the PiP, because it is not able to keep up with the higher frame rate. But then the question is why doesn't it do it 100% of the time.

So thank you all for thinking about it, and multiple thanks to the ones who can help this one be marked "solved". Later -

robow1 於 7 小時前 詢問

problen with my web page and Lockwise

I have created a web page with a number of edit boxes - the last of which is for entering a password. There is no edit box for a username - (not required!). The Firefox L… (閱讀更多)

I have created a web page with a number of edit boxes - the last of which is for entering a password. There is no edit box for a username - (not required!). The Firefox Lockwise function is a bit too clever in that it sees the word 'Password' in the label for the last edit box and concludes (wrongly) that the preceding edit box is a username and prompts to select from a list of pre-saved usernames. I do not want to disable the Lockwise function globally. However I do want to prevent it from prompting for a username on my web page - not only for me but for everyone else viewing my web page. Is there something I can add to the HTML or php code which will fix the problem?

peter358 於 1 天前 詢問

peter358 最近回覆 於 11 小時前

When first opening FF - I get a blank NEW TAB instead of my homepage

I have tried the 'refresh Firefox' feature multiple times and changed the name of the PREFS.JS file - but no matter what I try, when I first open Firefox it opens a blank… (閱讀更多)

I have tried the 'refresh Firefox' feature multiple times and changed the name of the PREFS.JS file - but no matter what I try, when I first open Firefox it opens a blank 'New Tab' instead of my homepage.

When I have done the refresh and PREFS.JS clear, the first time I open Firefox it works fine. But as soon as I close the browser, I am back with only getting the blank NEW TAB on launch - and this is driving me nuts.

The only thing that I have NOT tried is a full uninstall of Firefox and deleting any and all remaining files, then doing a fresh installation. However doing so would cause me some issues with the dozens of sites that require passwords (which I am not sure I remember them all). I DID do an export of my bookmarks but that is all.

Does anyone have any idea how to resolve this issue?

althor015 於 12 小時前 詢問

Router Configuration page not shows grafically by Firefox browser

It is happening recently.... when I login in the //192.168.1.1 Huawai-Router then Firefox shows HTML-code instead of Router’s graphic page. If I use another browser all … (閱讀更多)

It is happening recently.... when I login in the //192.168.1.1 Huawai-Router then Firefox shows HTML-code instead of Router’s graphic page. If I use another browser all is normal and I can see router's configuration pages. I deleted all cookies but no results also. Thanks in advance for your support.

pp_sini 於 14 小時前 詢問

Download folder will not be accepted

Die Änderung des Download Ordners wird nicht akzeptiert, und jetzt wird der Download Ordner auch nicht mehr geöffnet! Firefox wurde deinstalliert (unter Schwierigkeiten n… (閱讀更多)

Die Änderung des Download Ordners wird nicht akzeptiert, und jetzt wird der Download Ordner auch nicht mehr geöffnet! Firefox wurde deinstalliert (unter Schwierigkeiten nach Komplikationen mit einer Webseite) und neu installiert, wobei der Privacy Badger ungefragt mit installiert wurde (Warum?).

georg.opfermann 於 14 小時前 詢問

New PDF reader always uses the same name "document.pdf" when saving via keyboard shortcut (cmd+S on macOS)

With the previous version of Firefox (with the old PDF reader) I used to open PDF article from physics journals (e.g. https://journals.aps.org/prl/pdf/10.1103/PhysRevLett… (閱讀更多)

With the previous version of Firefox (with the old PDF reader) I used to open PDF article from physics journals (e.g. https://journals.aps.org/prl/pdf/10.1103/PhysRevLett.125.131101 ) and save them using cmd+C (on a Mac). The default name of the file used to be "PhysRevLett.125.131101.pdf" while now it's always "document.pdf", which is very inconvenient, since I have to manually rename the files before downloading. If I save the file by clicking on the download icon in the reader, I still get the same more informative filename (but I don't get to choose the location for the download). I'm wondering why the name of the file is not consistent between the two ways of saving documents. Is there a way to go back to the old behaviour (unlikely, I guess)? Anyway I'd like to suggest the developers to go back the old way of handling the file name, if there are no strong reasons for the change.

Francesco 於 15 小時前 詢問

Latest update won't allow me to get to Sharepoint?

As soon as the latest update installed 9.25.2020, I can no longer get to my company SharePoint website. I can get to it on all of my other browsers with no issue. Any th… (閱讀更多)

As soon as the latest update installed 9.25.2020, I can no longer get to my company SharePoint website. I can get to it on all of my other browsers with no issue.

Any thoughts? I've cleared my cache and restarted. Still doesn't go to the site. There is no error message, I click the link or type in the website and it just flashes in the address bar and then nothing.

Thanks in advance.

Grazen 於 17 小時前 詢問

openh264-win64

Видеокодек OpenH264, предоставленный Cisco Systems, Inc. Плагин автоматически установлен Mozilla для реализации спецификации WebRTC и выполнения звонков через WebRTC на у… (閱讀更多)

Видеокодек OpenH264, предоставленный Cisco Systems, Inc. Плагин автоматически установлен Mozilla для реализации спецификации WebRTC и выполнения звонков через WebRTC на устройства, требующие использования видеокодека H.264. Посетите https://www.openh264.org/ для просмотра исходного кода кодека и получения подробной информации о его реализации. Видеокодек OpenH264, предоставленный Cisco Systems, Inc. будет скоро установлено.

nikkolla58 於 18 小時前 詢問

Speaking selected text no longer works in FF 80.0.1

In my last version of FF, my Mac was able to speak selected text in FF. Speaking text works in all other applications, but not in my updated FF 80.0.1. Although... if I… (閱讀更多)

In my last version of FF, my Mac was able to speak selected text in FF. Speaking text works in all other applications, but not in my updated FF 80.0.1. Although... if I select text on a FF page to speak, I can only hear the spoken FF text when I click over to another open application. When I click back to the FF page, speaking the text stops. If I click back to the other app like TextEdit... then my Apple Speech continues to read the text selected on the FF page. The only way to hear any selected text on a FF page, is to select the text, use my Apple speech command button and then click over to another open application, until the spoken text in FF is finished speaking. This is not convenient. This issue only started with FF 80.0.1.

How can this be fixed, so my Mac's speech commend will read selected text on a FF page? I use Apple Speech command to read back my longer posts I’m getting ready to post on a webpage to make sure it makes sense.

In short... I can no longer use Apple's speech command to read selected text on a FF 80.0.1 page. This only started happening in this new 80.0.1 Firefox.

RedKnight 於 2 週前 詢問

RedKnight 最近回覆 於 19 小時前

Publisher Blocked

I have windows 10 pro and after recent auto update I get an error saying that app is blocked. How do I fix. Tried to go to unblock publisher but win+X does not bring up … (閱讀更多)

I have windows 10 pro and after recent auto update I get an error saying that app is blocked. How do I fix. Tried to go to unblock publisher but win+X does not bring up the window everyone says. What do I do??????? I'v been using firefox for years and don't want to change to another broswer unless necessary. Thanks in advance. Charlie Justice

chaarlie.justice 於 1 天前 詢問

Custom Search IP

I have a search engine hosted locally that I am attempting to use as a search in firefox. I had it working correctly for some time but then had to update the server addre… (閱讀更多)

I have a search engine hosted locally that I am attempting to use as a search in firefox. I had it working correctly for some time but then had to update the server address. Intially it was at a 192.168.1.x:xxx address. I simply added it as a search engine and it worked fine. The server has since had the IP address changed to a 10.200.x.x:xxxx number. If I remove the old search and go to the new IP address and save that as a search engine it uses the cached or somehow other stored IP address and reverts to the 192.168.1.x address.

Does anyone have an idea of how to clear the cache or otherwise manually edit the address once the search has been added? I have removed every trace I can think of the old address but still whenever it is added it uses the 192 address.

KrypticKahos 於 1 天前 詢問

opening url in specified firefox profile from command line

Hi, is there a way how i can let firefox open a link in new tab from command line for specified profile? Ideally in a way in which it doesn't matter, whether firefox is a… (閱讀更多)

Hi,

is there a way how i can let firefox open a link in new tab from command line for specified profile? Ideally in a way in which it doesn't matter, whether firefox is already running or not

I know I can do something like: firefox --new-tab 'https://www.google.com' this works no matter whether firefox is already running (just add new tab) or it's not (open firefox and add tab)

But what I want to achieve is something like this: firefox -P myProfile --new-tab 'https://www.google.com where myProfile is existing profile.

This works unless firefox is running with that profile (opens new instance). But if it's already running i get the error message (Firefox is already running but it's not responding. To use firefox you must first close the existing firefox process, restart your device, or use a different profile). I tried it with/without --no-remote options but it didn't help

I want this for a script that should open pages automatically but not in the default profile. And it should be able to work even if the profile is already running.

Thanks for any advice, Jaymes

jaymes.ramona81 於 1 天前 詢問

Icon in Taskbar

I re-installed Firefox to begin using it as my main Web Browser and the icon in the taskbar is a white sheet of paper and I'd like the Fox icon. It took me a while to co… (閱讀更多)

I re-installed Firefox to begin using it as my main Web Browser and the icon in the taskbar is a white sheet of paper and I'd like the Fox icon. It took me a while to configure Firefox with all my imported bookmarks, etc. so I'd like to find a fix without deleting and re-installing the software. Was thinking/hoping the icon could be copied/placed in the root directory of the software?

David.Conway 於 2 天前 詢問

David.Conway 最近回覆 於 1 天前

Multi-Account Container: YouTube is stuck on "Personal Container"

Background: Whenever I open YouTube, I want it in a dedicated container. Initially, I opened it in my Personal Container, and assigned YouTube.com to open in it. Howeve… (閱讀更多)

Background: Whenever I open YouTube, I want it in a dedicated container. Initially, I opened it in my Personal Container, and assigned YouTube.com to open in it. However, I'm stuck in a loop with YouTube being assigned to my Personal Container now.

What's Wrong After that initial assignment to my Personal Container, I later realized that I could create a dedicated container for YouTube, so I created a YouTube Container.

To switch YouTube to open in my dedicated YouTube container, I browsed to www.youtube.com, right clicked the tab, and re-open in Container - selected YouTube. It prompted me to confirm, I clicked the "remember my decision" checkbox and the open in YouTube Container. YouTube successfully opens in my YouTube container.

However, it never remembers my decision - it always prompts me to confirm the current container (which may be no container at all) or the Personal Container. In fact when*ever* I click a YouTube link, it asks me to confirm.

It feels like YouTube is "stuck" in the personal container, and I can't get it out of this loop.

I've tried to look for docs, but I haven't found any that address my issue. Also, isn't there a way to edit assignments manually using a listing of sites and the containers they're assigned?

Any thoughts are appreciated. Thanks!! - David

DavidAllyn68 於 1 天前 詢問

cannot browse between pages

Hello, When using <https://groups.io/g/swskeds/files> I cannot move to another page because Firefox shows the "forbidden" symbol when I move the cursor to the page … (閱讀更多)

Hello,

When using <https://groups.io/g/swskeds/files> I cannot move to another page because Firefox shows the "forbidden" symbol when I move the cursor to the page info (See image). I'm limited to page 1.

Any idea?

W7 32 bit with Firefox 81.0

andisch 於 1 天前 詢問