Diễn đàn hỗ trợ Thunderbird

Hello,

I can't receive any of my e-mails. I can send e-mails out now. Plus I can put in my password to log into my e-mail.  This has been a headache for me, I have been with Thunder Bird for years.

I also get a boxes that says : Unable to write the email to the mailbox. It says to make sure the file system allows me to write privileges, and I have enough disk space to copy the mailbox. I have enough space on my computer system and all. Another box that says my e-mail is being processed. Please wait until processing is complete to get messages. I did e-mail you yesterday on these issues. As I said I can e-mail messages out now also log into my e-mail with my password. Thanks, Chris

Hello,

I want to make Saved Searches

So the 3rd step is to choose your folders.

I have a TON of folders and mostly I want to

Start from all folders and only unselect a few of them.

But here it starts from all subfolder collapsed and all folders unselected.

So for me the first step is to manually expand all folders, and subfolder and subsubsubfolders and so on.

And then go down the entire list and select every single one.

And THEN start from the top of the list again and now, choose which one in particular I want to exclude.

I know this sounds like, I should just check the ones I want to include.

But for some reason, that feels completely impossible to do. I can only unselect the ones I don't want and it feels impossible to only select the ones I want "which is all except a few"....

Usually, I never make it to the end and just give up before I get to the stage where I would start unchecking the ones I don't want.

So, this is the reason for this question.

"In Create Saved Search, Choose Folder dialog, how to select all and expand all folders ?"

I've been using Thunderbird for years but suddenly as of yesterday it's stopped receiving messages. First it told me my password was incorrect. Ever since then when I try to click "Get Messages," it simply has no response at all. Nothing happens. I went into my Thunderbird password settings, and upon seeing that the incoming-message password had for some reason reverted to an old, obsolete password, I corrected it and saved the correct one. I've checked several times and the passwords are correctly saved now. But this did not fix the problem. When I click "Get Messages," nothing happens. My Thunderbird is connected to my Earthlink account, which is working fine. When I go into Earthlink, I am able to send and receive messages as normal. So the problem is not with Earthlink but with Thunderbird.

After some Windows Updates installation, my computer behaved very erratically, and I had to reset it. After selecting the option to keep all files, it appears to be a joke, as I have ended up having to reinstall almost everything. Regarding Thunderbird, all the files have disappeared including the folder with the profiles, however I did a back of that folder on a separate disk and I need to know if that can be used and how to go about it.

I am trying to add an Proton mail account to Thunderbird using the Proton Mail Bridge (PMB). In the PMB guide it is recommended to uncheck Account Hub in the Setting>General. The problem is that the Account Hub still pops up when trying to add a new mail account - it simply refuses to go away regardless of several restarts of both the computer and the mail client!

I have been using Thunderbird calendar synced to gmail a/c on Linux Mint for many years and have been able to send reminder notifications by email. Recently I had to unsubscribe my calendar and reinstall to clear a fault and the notification by email function has disappeared from Thunderbird event notifications. Can you tell me how to restore that function?

Version 140.11.1esr

keep getting connection to sever failed, wont load any emails or send messages, does not show any old emails that were saved, settings are all correct tried all fixes, nothing works ?

Thunderbird 140.7.1 i have a subfolder called "purchases" which I add to on a regular basis. Suddenly no messages appear after May 2014 I have logged in directly to the mail server, and all the missing messages are definitely on the server. I have checked the local filters, none are set. I have tried properties/repair. I have tried removing ~/.thunderbird/xxx/ImapMail/mail.myserver.com.au/INBOX.sbd/purchases.msf

Could it be a problem with dovecot indexing on the server? all the other subfolders seem to work fine. It's just this one.

My Yahoo account on Thunderbird sees no email found.

My eMail Providers: Yahoo, AOL, Gmail.

AOL and Gmail(2 accounts) work fine. Only Yahoo doesn't respond. As you can see in the attached screen shot, it shows a "No Messages Found" message.

I have tried everything listed in the support page.

I'm sure it is something simple but I can't see it.

I posted this earlier and the bot named David is trying to take over with ideas that don’t work. How do we stop it? I also posted from my own email and it tried to stop me.

To whom it concerns, It just happened yesterday June 11,2026. I put in my password to my e-mail to open it and it stated that my e-mail account is being processed. Said to wait until processing is complete to get messages. I have never had this issue, I been with Thunder Bird e-mail for years. It isn't even showing my e-mails that I had in my inbox on my e-mail. If you can please help, I need my e-mail up and going. Thank you, Chris Note, it also said that Thunder Bird had crashed in a box, they wanted to know what page I was on. I am not understanding this.

Já há dois dias que eu não consigo receber e nem enviar emails e já tentei de tudo, já até desinstalei o Thunderbird e reinstalei e nada... Uso o computador e tenho outras contas, mas só a conta do sapo que tenho(marcaomulder@sapo.pt) é que está a dar problemas... Já nesta conta, se eu acesso o servidor(sapo.pt) está tudo a funcionar correctamente, sendo portanto o problema desta conta no thunderbird! Estou a contar com a vossa ajuda, pelo que muito vos agradeço!

• Já agora neste momento, depois que reinstalei o thunderbird, ainda não consegui reinstalar a minha conta: marcaomulder@sapo.pt

Cumprimentos!

I think I've tried everything to figure out why Thunderbird will not send emails.

Yes there was an update the last week of May to version 140.11.1esr (64-bit).

Yes the incoming and outgoing mail server info gibes with my ISP (Shaw) - added pix

Yes have done the necessary adjustments to Windows Defender and Firewall.

Yes I have increased mail.news.tcptimeout because occasionally have received message that "Outgoing server

• SMTP" mail.shaw.ca timed out. Try again. Yes I have indeed tried again.

Yes I have called Shaw and they will not offer any suggestions because TB is a third-party.

What's left to try? A version reversion? Thunderbird has been so stable for so long. I even considered Betterbird but it uses the same profile so............

Thanks.

I was hacked on 8th and received no emails until 11th. I think there may have been a couple of important emails but I can't find a way to retrieve them. Can you help please.

To get some information out of the way before reading: my verbose step-by-step is listed below, followed by a summary without the trouble shooting steps. I have read the information about managing profiles when running multiple release channels, but found it a little confusing. If I can improve the formatting here, please let me know and I will edit my post to be more clear.

I am leaving the troubleshooting steps in the event that I did something wrong here.

My questions are primarily: 1. is there a more straightforward way to do this? 2. are there any additional steps to follow after successfully getting both a Release channel installation and a Beta channel installation as far as profile management?

The problem, with step-by-step troubleshooting steps to solve I have Thunderbird Release installed on Linux Mint system-wide, following the instructions here: https://support.mozilla.org/en-US/kb/installing-thunderbird-linux#w_system-thunderbird-installation

Now I take note of the fact that beta must be installed in a different directory: "It is possible to have multiple channels of Thunderbird installed, and even run them simultaneously. Each must be installed in a different installation directory, which will force multiple Thunderbird data profiles to be used in order to protect and keep your data separated."

• ...so although I have an `/opt/thunderbird/` directory, I rename the downloaded extracted tarball `thunderbird-beta/` and move that directory to `/opt`

I move on to Step 4 from the article linked, creating a symlink.

• what I used to install Release: `sudo ln -s /opt/thunderbird/thunderbird /usr/local/bin/thunderbird`
• what I used today to install Beta: `sudo ln -s /opt/thunderbird-beta/thunderbird /usr/local/bin/thunderbird-beta`

Everything works from here as far as me being able to click on the `thunderbird-beta` executable in `/usr/local/bin` and get into the Beta application with a fresh program.

Here is the step I'm unsure of, and where I run into issues.

In Step 5 of the linked article, when I installed release: "Download a copy of the desktop file": `wget https://raw.githubusercontent.com/mozilla/sumo-kb/main/installing-thunderbird-linux/thunderbird.desktop -P /usr/local/share/applications`

...gives me a launcher in `/usr/local/share/applications`. I can edit this in a text editor to point to a different icon etc if need be, but when installing release this is obviously already configured.

So when I install beta, I don't want two of the same icons representing different Thunderbird channels, because my assumption is that will cause issues. So instead of downloading this file again, I copy the file I downloaded with `wget` when installing release, and instead of naming it `thunderbird.desktop` I name it `thunderbird-beta.desktop`

• I then edit this file in a text editor to point to the Beta icon in `/opt/thunderbird-beta/chrome/icons/default/default256.png`
• But the resulting file indicates "there was a problem launching the application" and when reopening the file in a text editor, I notice none of my changes have persisted and it's blank.

...I can confirm through a file manager that the icon at `/opt/thunderbird-beta/chrome/icons/default` is a visually different icon with "Beta" added to the bottom of the icon.

So this launcher in `/usr/local/share/applications` is the step I'm having trouble with.

Troubleshooting steps:

• I delete the previously edited `thunderbird-beta.desktop` file, and I rerun the `wget` command to download another copy of `thunderbird.desktop`, this time using the `-o` flag so that the resulting name is `thunderbird-beta.desktop` again. I again edit this with a text editor and point the icon field to `/opt/thunderbird-beta/chrome/icons/default/default256.png`

For some reason, this works: allows me to save my changes and the icon of `thunderbird-beta.desktop` successfully changes to the Beta icon. By default, with no other changes, clicking this successfully launches Thunderbird, but of course it launches my Release version, so I change the Exec parameter to point to the Beta executable in `/usr/local/bin`

And now I get my desired results: start menu entry, separate icon, and launching the Beta release.

So my primary questions again are: 1. I notice that simply running the Beta application once uses the same `.thunderbird` directory that Release uses, and creates its own profile folder, which seems ideal to me. Verifying that this is the expected and preferred behavior? 2. I'm confused about the support article for profile management when running multiple release channels. Do I want to re-add all of my accounts to Beta from inside the application, therefore having two copies of my mail and profiles on my computer?

In Thunderbird 151.0.1 [64 bit] I get the following error message: Error Inbox - inbox on .....[my email address] "There is not enough disk space to download new messages. Try deleting old mail, emptying the trash folder and compacting your mail folders and then try again." I did all of that, even went into windows disk cleanup to free up more disk space. I get the same error message. I have 3 email accounts in Thunderbird, only one account has this problem. When I use Outlook express I do not get any error messages but I do get a malicious email that AVG intercepts. So how can I purge bad email from Thunderbird ? Or what else may be going on and what else could I try ? I have deleted all old emails, in Thunderbird, I routinely delete old emails. Thanks alot Sam

Using Provider for Exchange Activesync v4.18 because my calendaring host requires EAS v16. I have recurring events (e.g., multi-day hotel reservations) which seem to SHIFT a day earlier than originally specified after a synchronization.

An address book that I was using for years suddenly stopped working. It was called 'nachbarn'. I had to rename it to 'nachbarn@here', and it worked again. This is on Linux, and a week ago I have been using this list with its old name. But in betwen I changed my account from POP3 to IMAP, which may have contributed. Since there are plenty of complaints on the Internet, I'd suggest to change the plausi check for the address field, so that the address must either contain an '@' or be the name of a list or address book?

Thanks a lot!

My email provider provides "Disposable Email Addresses" - aliases which still direct mail to my inbox but don't expose my primary email to any web sites etc. I provide them to. It's very handy for registering for mailing lists, product vendors etc. since if one gets leaked, it's no big deal. I can drop the email again, but at least I know who was responsible for leaking it (I still get spam to my old Myspace account). My problem is that I'll occasionally have a need to reply such an email, and by default my From: address is my primary email address, not the one in the To: header. This is confusing to the recipient (since it's from some unknown email) and also exposes my email unintentionally. Is there any way to configure Thunderbird to always reply using the To: address? If there are multiple To: or CC: addresses, it could perhaps be specified with a wildcard matching any of my aliases. I can do it with Identities, I know, but I have to set that up before replying and I frequently forget.