Diễn đàn hỗ trợ Firefox

I've been using Firefox since forever but over the last couple of months, the auto translate subtitles (to English) hasn't been working when watching Youtube videos. There's a thread on the Youtube support site with nearly 40,000 posts of people with the same issue and tonight I was trying to watch a video where the hosts talk in Italian, so I use auto translate to English subtitles but no subtitles appear. It will show Italian language subtitles.

I've gone back through this Youtube channel's history trying videos I've previously watched from months/years ago when auto translate used to work but even they're not working now.

I decided to try the video in Edge browser and to my surprise the auto translate to English worked there. They also work in Chrome.

So what could be causing this issue on Firefox, which started about August time?

This is quite bizarre as I assumed all the processing/translation was done by Google/Youtube so in what way can Firefox be part of this issue?

To be clear, subtitles in the (foreign) language the people are speaking, works. Subtitles translated from that language to English (or other languages) has stopped working. Subtitles translated from that language to English IS working on Edge and Chrome browser.

Suddenly I cannot search from the search bar. It defaults to the address bar. why "fix" something that was not broken. Being forced to use the address bar is frustrating. If you go directly to the address bar, it tells you it cannot find that site.

Since the recent update to Firefox 131, I can no longer use the Billpay option of my TD Bank account. I am able to log into my account without any problems and use all of the options except for Billpay. I want to add that I know I am not alone with this problem as I have seen several others with the same problem but with different banks. It is the Billpay option which no longer works.

As I said, the bank site is fine until I click on "Billpay", Then I get this: begin quote: "Why can't I access Bill Pay?

You might have cookies blocked or cross-site tracking prevented. Depending on what browser you're using, check your settings for these terms:

   Block third party cookies
   Cookie tracking
   Cross-site tracking

Make sure cookies are not blocked and cross-site tracking is enabled. Follow any additional instructions in your browser once you have adjusted these settings.

Copyright © 2024, TD Bank, N. A.. All rights reserved." end quote.

I have disabled uBlock Origin, Enhanced Tracking, tried Private Mode, Troubleshooting Mode to no avail.

I have also cleared cookies & data. This appears specific to v131. Any suggestions??

When following a link from a news website I keep getting this message - Secure Connection Failed - The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. It loads on my iPhone and other browsers using the same link. What setting do I need to address to get this to stop?

I was excited to receive the new Tab Groups feature and am now disappointed that it's not working and I've 'lost' dozens of tabs.

Here's what I did: I created several groups by right-clicking and added tabs to each of the groups. Since it appears that only way to collapse a group is to "save and close group," I closed each group. Now they are all gone. When I right-click to create a new group or "add tab to group," the closed groups are nowhere to be found. Plus, I do not see a "list all tabs icon" on my toolbar to reopen the grouped tabs, which is what [article] says should happen.

Suggestions for making this work?

I can't figure out which topic to use for this but I can't submit it without one.

When I click on the star icon in the address bar the star icon is filled in, and existing bookmarks do show with the filled-in star icon and they work. But I no longer get a dropdown where I can assign a folder, edit, tag, or delete an existing bookmark, and the pages I've tried to bookmark don't show up in Recently Bookmarked so they haven't been added. I don't know if it has something to do with the toolbar?

Nothing I can find online helps. The places.sqlite file in my profile is not read-only, and I refreshed Firefox (stupidly, before I took a screenshot of the pinned shortcuts on my New Tabs page) and that made no difference. The only extension I use is UBlock Origin. Changing profiles did not help. This is on my personal laptop and no organization controls my settings.

I stay up to date on Windows 11 and Firefox updates. I do use a VPN but it never interfered with bookmarking functionality before. (I see Firefox offers a free one now but I've got a couple of years left on my paid subscription).

I asked the community but got no replies. (I did "reply" to add more information which no longer applies, and I can't seem to delete the "reply".)

Thanks in advance for any help!

In a few previous updates, FF keeps messing around with the New Tab layout, ruining its previous good look. I learned to revert it back to its former setting by disabling browser.newtabpage.activity-stream.newtabLayouts.variant-a and also browser.newtabpage.activity-stream.newtabLayouts.variant-b in about:config.

Now in Firefox 141, browser.newtabpage.activity-stream.newtabLayouts.variant-a has completely disappeared, no more allowing the poor user to get the look he wants.

Why? Am I missing something? What is the use of making the product worse or less user friendly?

recent firefox update can no longer copy and paste when creating a blog post in Squarespace, I have been using squarespace for around 15 years for my websites and I have never seen this issue, Firefox 15.1 installed and all of a sudden when trying to create a blog post in Squarespace, when I right click a text box pop up and it no longer says paste so I can no longer copy and paste text - this is more than a little annoying, you will not be surprised to know that I am now using Chrome to create my posts, there is no issue in chrome. I am a firefox geek! how can i solve this problem, I just did another update from Firefox, the issue remains I have been using computers for 40 year so I am not a novice but software glitches, I am lost

I recently opened Firefox to see a new flagged warning under my toolbar that says "The security sandbox is disabled. Your configuration is unsupported and less secure."

I have gone into about:config and adjusted every security.sandbox element to see if that would change anything; it did not.

I am running on Windows 11 Home so I cannot install or properly run Windows Sandbox.

I would either like a solution to enable the sandbox once again, or just remove the notification from the toolbar.

Gentlemen, isn't your browser using a lot of RAM? I've been freaking out about it in recent years. That's only with 25 tabs open!! Despite the fact that the system was installed just a day ago, without any tweaks!!!

Hi, my session with a lot of open tabs has been lost due to a crash. In the profile folder, the recovery and previous files in the sessionstore-backups have been deleted. I tried to recover them using shadow explorer, but these files are corrupted, so I've had no success reading them. Is there a way to fix the corrupted files? Alternatively, because I've had sync enabled for open tabs, is there a log for past open tab synchronizations? If this was stored on the cloud, it may be possible to retrieve that table and restore the list of open tabs that way?

I use the IRS form filler to pay my taxes...have for years with Firefox browser. This year (for 2024 return) when I sign into the site the 1040 form does not display correctly. the boxes are to the right and below the actual placement. I emailed IRS who said it is a setting in Firefox. I tried the site using Microsoft EDGE and it displays correctly. I have searched for possible solutions and tried them all like using/on and off excelerator, letting Firefox chose size and colors of sites, turned off Noton etc. I posted another question here but no replies or looks so maybe I did something wrong so I will try to post again. I have W10 fully updated and Firefox too up to date. I understand I could use Edge but never had to and prefer to use Firefox as I have before. any suggestions would be appreciated or where I can report a possible issue with Firefox. I have attached a sample. thank You

Hello,

I recently updated my Firefox browser to the latest version, 138.0.1 (64-bit), on Windows.

After the update, I noticed that when playing videos in fullscreen mode (for example, on YouTube or other video websites), the Windows taskbar (the bar at the bottom of the screen with the Start menu icon) does not hide automatically. This is affecting my fullscreen viewing experience.

Before updating to version 138.0.1, the Windows taskbar would hide correctly when entering fullscreen video.

I was wondering if anyone else has encountered a similar issue with the Windows taskbar not hiding, or if there are any suggested solutions to help resolve this problem.

Thank you for your help!

Hello, I am running Firefox on a W10-Pro PC. I always click the lock to check certificate validation. In the last month I keep seeing "Connection verified by a certificate issuer that is not recognized by Mozilla".

When I click for more information I see that "Norton Web/Mail Shield" does not recognize the certificate issuer. When I click on Learn More it takes me to a Firefox site "How to disable the Enterprise Roots preference" I also checked W10 certmgr.msc and I see Norton is listed. Images included below. I would love to resolve this issue. Thank you for your time.

AvailablePageFile: 9994584064 AvailablePhysicalMemory: 6990008320 AvailableVirtualMemory: 138533823639552 BackgroundTaskMode: 0 BuildID: 20250616215311 CPUMicrocodeVersion: 0x64 CrashTime: 1750858075 HeadlessMode: 0 InstallTime: 1750788070 ModuleSignatureInfo: {"Mozilla Corporation":["firefox.exe","xul.dll","gkcodecs.dll","nss3.dll","mozglue.dll","lgpllibs.dll"],"Microsoft Windows Software Compatibility Publisher":["msvcp140.dll","VCRUNTIME140_1.dll","VCRUNTIME140.dll"],"Microsoft Windows":["MpDetours.dll","wsock32.dll","dbgcore.dll","ktmw32.dll","winmm.dll","version.dll","propsys.dll","DWrite.dll","uxtheme.dll","dbghelp.dll","windows.storage.dll","kernel.appcore.dll","ntmarta.dll","CRYPTBASE.dll","msasn1.dll","ntasn1.dll","ncrypt.dll","bcrypt.dll","ucrtbase.dll","crypt32.dll","msvcp_win.dll","win32u.dll","KERNELBASE.dll","gdi32full.dll","WinTypes.dll","bcryptPrimitives.dll","wintrust.dll","shell32.dll","shlwapi.dll","user32.dll","rpcrt4.dll","SHCore.dll","ole32.dll","psapi.dll","kernel32.dll","advapi32.dll","imm32.dll","oleaut32.dll","msvcrt.dll","gdi32.dll","ws2_32.dll","combase.dll","sechost.dll","ntdll.dll"]} ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384} ProductName: Firefox ReleaseChannel: release SafeMode: 0 SecondsSinceLastCrash: 820 StartupCrash: 1 StartupTime: 1750858075 SubmittedFrom: Client SystemMemoryUsePercentage: 79 Throttleable: 1 TotalPageFile: 65870069760 TotalPhysicalMemory: 34067255296 TotalVirtualMemory: 140737488224256 UptimeTS: 8.00534 Vendor: Mozilla Version: 140.0 This report also contains technical information about the state of the application when it crashed.

Hi!

We have a intranet site that works in Edge and Chrome without issues with the site added to "internet options". But for some reason we are getting 401 Unauthorized when trying to access it from Firefox. I have tried adding the urls to: network.automatic-ntlm-auth.trusted-uris network.automatic-ntlm-auth.allow-proxies: true network.automatic-ntlm-auth.allow-non-fqdn: true network.auth.force-generic-ntlm: false network.auth.force-generic-ntlm-v1: false

Ingocnito mode , same error. I have tried disabling all plugins. Disabled DNS over HTTPS.

HTTP/1.1 401 Unauthorized Server: Microsoft-IIS/10.0 WWW-Authenticate: Negotiate X-Powered-By: ASP.NET Date: Mon, 25 May 2026 08:15:41 GMT Content-Length: 0

Regards Rasmus

I recently encountered an issue when attempting to login to The Coventry Building Society website using Firefox (desktop PC & Windows 10):- https://www.coventrybuildingsociety.co.uk/ It failed to display the page used to enter the one time passcode used for two factor authentication.

After looking on some forums I discovered this is because 'Strict' tracking protection was enabled. If I change to 'Custom' and uncheck 'Tracking Content' then things work as expected.

I also read on a forum that you can leave tracking protection set to 'Strict' but enter the URL for the problem website under 'Enhanced Tracking Protection -> Manage Exceptions'. I tried entering 'https://www.coventrybuildingsociety.co.uk/' Initially this appeared to work. However, when I tried it again the following day, the page failed to load as before. I had to change back from 'Strict' to 'Custom' and uncheck 'Tracking Content' once again. It's as if the exception URL is ignored in 'Strict' mode.

Am I doing something wrong or is this how it is supposed to work? Do I need to click on the shield icon (to the left of the padlock icon) and turn off 'Enhanced Tracking Protection' every time I visit the website?