Tìm kiếm hỗ trợ

Tránh các lừa đảo về hỗ trợ. Chúng tôi sẽ không bao giờ yêu cầu bạn gọi hoặc nhắn tin đến số điện thoại hoặc chia sẻ thông tin cá nhân. Vui lòng báo cáo hoạt động đáng ngờ bằng cách sử dụng tùy chọn "Báo cáo lạm dụng".

Tìm hiểu thêm

Cannot access local address 192.168.1.1

  • 4 trả lời
  • 0 gặp vấn đề này
  • Trả lời mới nhất được viết bởi ElkHair14

more options

Cannot access local address 192.168.1.1 which is the address of the GUI interface to my ISP Gateway settings menu. I need it to be able to make changes to the Gateway settings.

I use to get displayed "Advanced" that allowed me to continue forward to get to an "insecure site", only recently that has not been happening (so I am stuck).

Any suggestions, advice, and/or workarounds are appreciated.

Thanks ~Bill

Cannot access local address 192.168.1.1 which is the address of the GUI interface to my ISP Gateway settings menu. I need it to be able to make changes to the Gateway settings. I use to get displayed "Advanced" that allowed me to continue forward to get to an "insecure site", only recently that has not been happening (so I am stuck). Any suggestions, advice, and/or workarounds are appreciated. Thanks ~Bill
Đính kèm ảnh chụp màn hình

Giải pháp được chọn

You are dead on, the image attached is the 'info' from selecting the padlock. I was able to stumble across that 'option' (I tried various combinations) but missed my chance and couldn't get it back). I'm pretty sure it has something to do with 'browser security'. If I had tried enough times I probably could have gotten back to where I needed to be... Kudos for the response.

I got a different anti-virus program (the wife made me uninstall "K") and I wasn't aware that it was blocking that "IP/Site" till later on. At any rate your response led me to try, once again, various browser settings... running in circles till I went back to the "proper way" to access that site, i.e., connect via the other ethernet port (Verizon 5G, with Wi-Fi disabled, will connect via port "2" leaving port "1" inactive). Attached 'port 1' to the PC.

I first tried it with a USB Wi-Fi adapter via my cell phone. That wasn't working either (once again, 'as it did before') until I disabled the Wi-Fi connection... bam, the login screen popped up. Attached that same cable to the PC and it didn't work util I disabled the other ethernet connection... bam, login screen. So I have my "work around". Can consistently gain access that way.

Thank you both tor your directions.

Notes: Check browser security settings: Check Anti-Virus. For ethernet connection check to make sure it is "only connection" (it will show no internet, but should get you to the login page).

(I've gotten in via all three ways, just couldn't recall the particular settings.)

Đọc câu trả lời này trong ngữ cảnh 👍 0

Tất cả các câu trả lời (4)

more options

I had a similar thing recently and found entering http://192.168.0.1 worked.

Hữu ích?

more options

Thank you for the suggestion. Have tried both http and https with similar results.

Hữu ích?

more options

What's on the actual page as what you show seems to be what you get if you click the padlock icon and then check the connection setting when you visit a page that only works via insecure HTTP ?

If you have enabled HTTPS-Only Mode then you should be able to set an 'Off' exception via the padlock.

Hữu ích?

more options

Giải pháp được chọn

You are dead on, the image attached is the 'info' from selecting the padlock. I was able to stumble across that 'option' (I tried various combinations) but missed my chance and couldn't get it back). I'm pretty sure it has something to do with 'browser security'. If I had tried enough times I probably could have gotten back to where I needed to be... Kudos for the response.

I got a different anti-virus program (the wife made me uninstall "K") and I wasn't aware that it was blocking that "IP/Site" till later on. At any rate your response led me to try, once again, various browser settings... running in circles till I went back to the "proper way" to access that site, i.e., connect via the other ethernet port (Verizon 5G, with Wi-Fi disabled, will connect via port "2" leaving port "1" inactive). Attached 'port 1' to the PC.

I first tried it with a USB Wi-Fi adapter via my cell phone. That wasn't working either (once again, 'as it did before') until I disabled the Wi-Fi connection... bam, the login screen popped up. Attached that same cable to the PC and it didn't work util I disabled the other ethernet connection... bam, login screen. So I have my "work around". Can consistently gain access that way.

Thank you both tor your directions.

Notes: Check browser security settings: Check Anti-Virus. For ethernet connection check to make sure it is "only connection" (it will show no internet, but should get you to the login page).

(I've gotten in via all three ways, just couldn't recall the particular settings.)

Hữu ích?

Đặt một câu hỏi

Bạn phải đăng nhập vào tài khoản của bạn để trả lời bài viết. Vui lòng bắt đầu một câu hỏi mới, nếu bạn chưa có tài khoản.