X
Nhấn vào đây để đến phiên bản di động của trang web.

Diễn đàn trợ giúp

Clicking on Menu, Logins and Passwords results in "No Logins Found". Complete reinstall with registry wipe and re-sync results in same condition.

Được đăng

However, when visiting a site, my login and password are populated. This leads me to believe that Firefox Lockwise is simply not displaying them. New login information is being saved, but again, not being displayed. This occurs on my HP laptop but works fine on my desktop. This is very frustrating. Please help.

However, when visiting a site, my login and password are populated. This leads me to believe that Firefox Lockwise is simply not displaying them. New login information is being saved, but again, not being displayed. This occurs on my HP laptop but works fine on my desktop. This is very frustrating. Please help.

Giải pháp được chọn

Alright. So, the developers believe that your issue is related to bug 1592562. This issue is likely caused by e10s (multiple process support) being disabled on Firefox. Perhaps this is something that you manually disabled in the past.

Previously disabling e10s was done with about:config preferences, but since Firefox 68 those preferences were disabled. Now it's done using an environment variable.

You need to delete the MOZ_FORCE_DISABLE_E10S environment variable from your system and then restart your computer to enable e10s support again. This website has step-by-step instructions on how to get to the environment variables.

Hope this helps.

Đọc câu trả lời này trong ngữ cảnh 1
Trích dẫn

Chi tiết hệ thống bổ sung

Phần bổ trợ đã cài đặt

  • Shockwave Flash 32.0 r0

Ứng dụng

  • Chuỗi đại diện người dùng: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:70.0) Gecko/20100101 Firefox/70.0

Thông tin chi tiết

Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

Câu trả lời hữu ích

Try changing the signon.management.overrideURI value to blank using the Configuration Editor for Firefox (about:config) and restart Firefox.

This will replace the Firefox Lockwise system with the legacy viewer that was used previously. Just curious to see if it's something wrong with just Firefox Lockwise or if Firefox can't see/load your logins at all for some reason.

When you've tested, reset that preference value to get Firefox Lockwise back.

Try changing the <code>signon.management.overrideURI</code> value to blank using the [[Configuration Editor for Firefox]] (about:config) and restart Firefox. This will replace the Firefox Lockwise system with the legacy viewer that was used previously. Just curious to see if it's something wrong with just Firefox Lockwise or if Firefox can't see/load your logins at all for some reason. When you've tested, reset that preference value to get Firefox Lockwise back.
Bài viết này có hữu ích với bạn không? 1
Trích dẫn

Người tạo câu hỏi

Well the logins and passwords showed up, but in the old "saved logins" format.This is a good workaround, but I'd really like to get the Firefox Lockwise view to work. Any ideas? Thanks!

Well the logins and passwords showed up, but in the old "saved logins" format.This is a good workaround, but I'd really like to get the Firefox Lockwise view to work. Any ideas? Thanks!
Bài viết này có hữu ích với bạn không?
Trích dẫn
Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

Ok, so that shows that something is likely wrong with Firefox Lockwise, not the file(s) that are storing your logins.

Once you have reset that preference, you should get Firefox Lockwise back again, although you will still be having the same issue of course.

Try running Firefox in Safe Mode to see if the issue goes away. If it does, that likely means that you have an add-on installed that is causing the problem.

If the issue is still happening when in Safe Mode, it's possible that your Firefox installation is damaged. Performing a clean reinstall usually fixes this type of issue, since it replaces any damaged or missing files, while preserving your Firefox data.

Hope this helps.

Ok, so that shows that something is likely wrong with Firefox Lockwise, not the file(s) that are storing your logins. Once you have reset that preference, you should get Firefox Lockwise back again, although you will still be having the same issue of course. [[Troubleshoot Firefox issues using Safe Mode|Try running Firefox in Safe Mode]] to see if the issue goes away. If it does, that likely means that you have an add-on installed that is causing the problem. If the issue is still happening when in Safe Mode, it's possible that your Firefox installation is damaged. [[Troubleshoot and diagnose Firefox problems#w_4-reinstall-firefox|Performing a clean reinstall]] usually fixes this type of issue, since it replaces any damaged or missing files, while preserving your Firefox data. Hope this helps.
Bài viết này có hữu ích với bạn không?
Trích dẫn

Người tạo câu hỏi

I disabled all the extensions and tried it again, but still the same result. It's hard to believe that no one else is experiencing this. I have already tried a complete uninstall/registry clean/reboot/re-install, to no avail. Very frustrating, but at least your work around lets me see the logins/passwords. Thanks for your help.

I disabled all the extensions and tried it again, but still the same result. It's hard to believe that no one else is experiencing this. I have already tried a complete uninstall/registry clean/reboot/re-install, to no avail. Very frustrating, but at least your work around lets me see the logins/passwords. Thanks for your help.

Được chỉnh sửa bởi dbcobb vào

Bài viết này có hữu ích với bạn không?
Trích dẫn
Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

Câu trả lời hữu ích

Does Firefox Lockwise give you any error messages?

You can check this using the console window. I'm not quite sure if Firefox Lockwise is treated as a website or a browser component, so I'm not sure which console window error messages will be sent to, so I'll have to open both.

First, just open Firefox Lockwise. Then press Ctrl + Shift + K to open the web console and Ctrl + Shift + J to open the browser console. On the browser console, depending on how long you've had Firefox open for, you may already have warnings and errors listed there. There should be a trash can button to click and clear previous errors.

Then just reload the Firefox Lockwise page with the reload button and see if any errors or warnings appear in either window. If errors do show up, post a screenshot of the console window(s) and we can take a look.

Thanks.

Does Firefox Lockwise give you any error messages? You can check this using the console window. I'm not quite sure if Firefox Lockwise is treated as a website or a browser component, so I'm not sure which console window error messages will be sent to, so I'll have to open both. First, just open Firefox Lockwise. Then press Ctrl + Shift + K to open the web console and Ctrl + Shift + J to open the browser console. On the browser console, depending on how long you've had Firefox open for, you may already have warnings and errors listed there. There should be a trash can button to click and clear previous errors. Then just reload the Firefox Lockwise page with the reload button and see if any errors or warnings appear in either window. If errors do show up, [[How do I create a screenshot of my problem?|post a screenshot of the console window(s)]] and we can take a look. Thanks.
Bài viết này có hữu ích với bạn không? 1
Trích dẫn
cor-el
  • Top 10 Contributor
  • Moderator
17670 giải pháp 159841 câu trả lời
Được đăng

Try to change the pref to about:logins (i.e. remove the ?filter=... part).

  • signon.management.overrideURI = about:logins
Try to change the pref to about:logins (i.e. remove the ?filter=... part). *signon.management.overrideURI = about:logins
Bài viết này có hữu ích với bạn không? 0
Trích dẫn

Người tạo câu hỏi

This just gave me a error that the address doesn't look correct. Thanks for your reply.

This just gave me a error that the address doesn't look correct. Thanks for your reply.
Bài viết này có hữu ích với bạn không?
Trích dẫn

Người tạo câu hỏi

Wesley, here's a screenshot of the errors seen after I click on Menu/Logins and Passwords. Thanks for your help.

Wesley, here's a screenshot of the errors seen after I click on Menu/Logins and Passwords. Thanks for your help.
Bài viết này có hữu ích với bạn không?
Trích dẫn
Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

If you go to the about:support page in Firefox and scroll down to the Remote Processes table, do you see Privileged About listed? If so, what's the number in the count column?

If you go to the <code>about:support</code> page in Firefox and scroll down to the '''Remote Processes''' table, do you see '''Privileged About''' listed? If so, what's the number in the count column?
Bài viết này có hữu ích với bạn không?
Trích dẫn

Người tạo câu hỏi

Nope, Privileged About isn't there. Just the empty Remote Processes table. If clicking on Logins and Passwords just displays an HTML table, is there another variable that I could try, just to see if it will display, other than %DOMAIN%? Thanks again for your help!

Nope, Privileged About isn't there. Just the empty Remote Processes table. If clicking on Logins and Passwords just displays an HTML table, is there another variable that I could try, just to see if it will display, other than %DOMAIN%? Thanks again for your help!
Bài viết này có hữu ích với bạn không?
Trích dẫn
Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

It doesn't appear to be something wrong with the filter.

Does the issue go away if you run Firefox as an administrator? To do this, close Firefox and then find Firefox in the list of programs on the Windows 10 start menu. Then right click on the Firefox icon and select Run as administrator (sometimes More > Run as administrator).

In the meantime, I've reached out to the Firefox developers to see if they have a better idea of why you are having this problem, in the event that the above doesn't help.

It doesn't appear to be something wrong with the filter. Does the issue go away if you run Firefox as an administrator? To do this, close Firefox and then find Firefox in the list of programs on the Windows 10 start menu. Then right click on the Firefox icon and select '''Run as administrator''' (sometimes '''More > Run as administrator'''). In the meantime, I've reached out to the Firefox developers to see if they have a better idea of why you are having this problem, in the event that the above doesn't help.
Bài viết này có hữu ích với bạn không? 0
Trích dẫn
cor-el
  • Top 10 Contributor
  • Moderator
17670 giải pháp 159841 câu trả lời
Được đăng

Are there any logins related messages present in the Browser Console ?

Are there any logins related messages present in the Browser Console ? *"3-bar" menu button or Tools -> Web Developer *https://developer.mozilla.org/en-US/Tools/Browser_Console
Bài viết này có hữu ích với bạn không?
Trích dẫn

Người tạo câu hỏi

No, launching Firefox as Administrator doesn't change anything.

No, launching Firefox as Administrator doesn't change anything.
Bài viết này có hữu ích với bạn không?
Trích dẫn

Người tạo câu hỏi

Here's what I've collected.

Here's what I've collected.
Bài viết này có hữu ích với bạn không?
Trích dẫn
Wesley Branton
  • Top 10 Contributor
685 giải pháp 5467 câu trả lời
Được đăng

Giải pháp được chọn

Alright. So, the developers believe that your issue is related to bug 1592562. This issue is likely caused by e10s (multiple process support) being disabled on Firefox. Perhaps this is something that you manually disabled in the past.

Previously disabling e10s was done with about:config preferences, but since Firefox 68 those preferences were disabled. Now it's done using an environment variable.

You need to delete the MOZ_FORCE_DISABLE_E10S environment variable from your system and then restart your computer to enable e10s support again. This website has step-by-step instructions on how to get to the environment variables.

Hope this helps.

Alright. So, the developers believe that your issue is related to [https://bugzilla.mozilla.org/show_bug.cgi?id=1592562 bug 1592562]. This issue is likely caused by e10s (multiple process support) being disabled on Firefox. Perhaps this is something that you manually disabled in the past. Previously disabling e10s was done with <code>about:config</code> preferences, but since Firefox 68 those preferences were disabled. Now it's done using an environment variable. You need to delete the <code>MOZ_FORCE_DISABLE_E10S</code> environment variable from your system and then restart your computer to enable e10s support again. [https://techdows.com/2019/08/multi-process-e10s-can-still-be-disabled-in-firefox-68-or-later-versions-here-is-how.html This website] has step-by-step instructions on how to get to the environment variables. Hope this helps.
Bài viết này có hữu ích với bạn không? 1
Trích dẫn

Người tạo câu hỏi

Sure enough, I had set this variable on my laptop! I can't remember when or why I did this (I suffer from long term loss of short term memory), but Logins and Passwords now displays properly. Thanks again for all your help. Merry Christmas!

Sure enough, I had set this variable on my laptop! I can't remember when or why I did this (I suffer from long term loss of short term memory), but Logins and Passwords now displays properly. Thanks again for all your help. Merry Christmas!
Bài viết này có hữu ích với bạn không?
Trích dẫn
Đặt một câu hỏi

Bạn phải đăng nhập vào tài khoản của bạn để trả lời bài viết. Vui lòng bắt đầu một câu hỏi mới, nếu bạn chưa có tài khoản.