Thunderbird Community Forum

I read the instructions on moving my profile to a new computer. The hitch is that on my current, Windows 10 computer, I’m apparently using a 32-bit version of Thunderbird. I only discovered this when I updated it (through Help) and saw that it updated to a December, 2024, 32-bit release. The transfer instructions state that there may be a problem if I try to use a Thunderbird profile from one version to a different version. To prevent that possibility, I either have to update my Windows 10 Thunderbird to the latest, 64-bit release, or specify the 32-bit install on Windows 11. Problem is, I don’t know whether or how I can update Windows 10 computer to latest Thunderbird 64-bit version. Can I? If not, will Windows 11 run a 32-bit release? Suggestions?

I had to restart my Mac. When TB restarted during relaunch of the Mac, it was like TB starting fresh. It didn't display my email accounts, or my folders with saved emails, etc.

I quit TB and looked for it in my Applications folder - and I found two versions of TB. Inside the Thunderbird folder was version 140.9.0esr. Outside the Thunderbird folder was version 150.0. See attached screen grab.

I thought I should try launching the newer version (which was outside the folder). So I moved the 140.9.0 version to the trash, then launched the newer version – and it had the same problem. It looked like I was starting TB from scratch.

Next I quit TB (the newer version) and moved the older version out of the trash and back into the TB folder and double-clicked on it. A dialog box popped up saying that the file is damaged and can't be launched.

So I tried launching the newer version again, and it still looks like starting from scratch.

I really hope somebody can help me solve this. I can't access any of my email accounts or any of my stored emails. I use email for work (as most of us do), so this is crippling me.

Thanks in advance for any help.

I Updated to Your Latest Thunderbird (Default) Update: And Now I Can't Open Addresses in A-Separate Window.... So I went Back to Previous Installation: And Now It Can't Find my Original Histrionic Emails on my D:Drive... I'm Trying to Reinstall my Original Version: And It's now Looking for mt Emails (which Don't Exist) On my C:Drive... It's Now Midnight Here and I'm Going To-Bed: I have Other Actives Saturday and Sunday Morning.... Can You Help Me Via my Email???? Lawrence W Emark X@verizon,net> Thank You!!!!

(PII redacted by moderator)

Hello!

I started using Thunderbird quite recently. After an unsuccessful installation, Thunderbird deleted it, as well as deleted the profile folder. In order to perform a clean installation of the program.

But after installation, Thunderbird started, to my surprise, already with accounts, and even with add-ons installed. I have not found an answer to my question about the complete removal of the program on the Internet. The only article found from this resource turned out to be without text: just the title. Here is the link to it: https://support.mozilla.org/en-US/kb/uninstall-thunderbird.

As a result, I cleaned out the entire registry, as well as all the folders found by the search. And only after that it was possible to install Thunderbird cleanly. In my experience, such deep cleaning has a detrimental effect on the Operating System. And I want to avoid this in the future.

Can you tell me how to remove Thunderbird from your computer COMPLETELY? What exactly should be deleted?

(This is a machine translation)

I am trying to upgrade from ESR to Release. I saved my profile successfully, went to the install page and clicked Download. Got a request to donate, which I did. Then I got a page saying Thank you, Finish installing and enjoy Thunderbird. But there is no way to finish installing and I never got a download file. I've tried multiple times, nothing happens. Help!

I installed Thunderbird on a new (used) computer running Windows 11 Pro using the old computer's mail account and password. Thunderbird seemed to connect automatically to the webmail. However, when I click on the email button the program makes me enter my name and password (already entered). Then when I click on next I get - Error Creating Account. What do I do now? Thanks.

Regards,

Dave [edited from public] @centurytel.net

Hi, folgendes Problem: plötzlich hatte ich keinen Zugang mehr zu TB, hab alles mögliche versucht, nix ging. Hab dann Update versucht, nix, dann neue Version runtergeladen, Meldung: A newer version of TB may have made changes to your profile.... etc. wie krieg ich das wieder hin ????

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'.

Here are the particulars to my system: john@cm26:~> sudo zypper if MozillaThunderbird Loading repository data... Reading installed packages...

Information for package MozillaThunderbird:

Repository  : Update repository with updates from SUSE Linux Enterprise 15 Name  : MozillaThunderbird Version  : 140.1.0-150200.8.230.1 Arch  : x86_64 Vendor  : SUSE LLC <https://www.suse.com/> Installed Size : 284.8 MiB Installed  : Yes Status  : up-to-date Source package : MozillaThunderbird-140.1.0-150200.8.230.1.src Upstream URL  : https://www.thunderbird.net/ Summary  : An integrated email, news feeds, chat, and newsgroups client Description  :

   Thunderbird is a free, open-source, cross-platform application for
   managing email, news feeds, chat, and news groups. It is a local
   (rather than browser- or web-based) email application that is powerful
   yet easy to use.

   KDE

Information for pattern kde:

Repository  : Main Repository Name  : kde Version  : 20231206-lp156.2.2 Arch  : noarch Vendor  : openSUSE Installed  : Yes Visible to User : Yes Summary  : KDE Applications and Plasma 5 Desktop Description  :

   Packages providing the Plasma desktop environment and applications from KDE.

Contents  :

   S  | Name                        | Type    | Dependency
   ---+-----------------------------+---------+------------
   i+ | patterns-kde-kde            | package | Required
   i  | patterns-kde-kde_plasma     | package | Required
   i  | MozillaFirefox              | package | Recommended
   i  | ark                         | package | Recommended
   i  | avahi                       | package | Recommended
   i  | discover                    | package | Recommended
   i  | dolphin                     | package | Recommended
   i  | gwenview5                   | package | Recommended
   i  | kate                        | package | Recommended
   i  | kcalc                       | package | Recommended
   i  | kipi-plugins                | package | Recommended
   i  | konsole                     | package | Recommended
   i  | okular                      | package | Recommended
   i  | patterns-desktop-multimedia | package | Recommended
   i  | patterns-games-games        | package | Recommended
   i  | patterns-kde-kde_internet   | package | Recommended
      | patterns-kde-kde_pim        | package | Recommended
   i  | patterns-kde-kde_utilities  | package | Recommended
   i  | patterns-kde-kde_yast       | package | Recommended
   i  | patterns-office-office      | package | Recommended
   i  | skanlite                    | package | Recommended
   i  | spectacle                   | package | Recommended
   i  | yast2-control-center-qt     | package | Recommended

   SUSE

   Information for product Leap:

Repository  : Main Repository Name  : Leap Version  : 15.6-1 Arch  : x86_64 Vendor  : openSUSE End of Support  : 2025-12-30 Flavor  : dvd Is Base  : Yes Installed  : Yes Status  : up-to-date Update Repositories : --- CPE Name  : cpe:2.3:o:opensuse:leap:15.6:*:*:*:*:*:*:* Short Name  : openSUSE Leap Summary  : openSUSE Leap 15.6 Description  :

   openSUSE Leap 15.6.

   KERNEL

john@cm26:~> uname -a Linux cm26 6.4.0-150600.23.60-default #1 SMP PREEMPT_DYNAMIC Tue Jul 1 14:43:49 UTC 2025 (6f98261) x86_64 x86_64 x86_64 GNU/Linux ___________________________________________________________________________________________-

Update particulars since the 8/4/2025

|root@cm26|'zypper' 'up'| 2025-08-04 14:55:01|install|libomp-devel|20-639.1|x86_64||devel_tools_compiler|1e51a50e5fce9250ba8f0022954c5ace3023e4e96f036caa5d9a332fb576648383f420fea778fef6c44a3973465c1e412b9d76369a2b5cf9bf09e803c2d27b55| 2025-08-04 14:55:02|install|llvm|20-639.1|x86_64||devel_tools_compiler|227efb182acf8ca11178437c1aa5392df7b533f6e5d66af6f04282cfb70b73e1365b8508084553ba5c6a6dd2c17e2d0991468c8b1cdb37ae92e40167b908e182| 2025-08-04 14:55:02|install|llvm-gold|20-639.1|x86_64||devel_tools_compiler|8ed08f0a486cce4a71fc01b5b619ca740820d86e4a65ecce3978e8fe4e3bd7d1bf3f2276a477ab72285b84073d1eb1af25786859eb3bc4d4867ba87c5d6769f3| 2025-08-04 14:55:02|install|llvm-polly|20-639.1|x86_64||devel_tools_compiler|eda6140297ac129aca87e3e46ee515145512a3d2cdc0c9b9eb60422c126ea6e6b8802b2921a4c1b0b321f90432e56d1a2cac924a199c49f3dcb4a9bd13bade9a| 2025-08-04 14:55:02|install|llvm-vim-plugins|20-639.1|noarch||devel_tools_compiler|5432e221a402b8944b39dd9e7c5da372021ada65a635cc85b7f3a0e908bbdc668a1f4c8f4282169852d08284b05e126e7825f5ed007953485d5dd38acccca0d8| 2025-08-04 14:55:02|install|llvm-polly-devel|20-639.1|x86_64||devel_tools_compiler|32680f5a310dcedc04d863fa5b6aadbdd2a6e4649900e5cee5e24ff6d8916f5fd491508ab3a5bc6fbef6b1fbb977a624a6a1e7633761c309dadef48dc8bc24f9| 2025-08-04 14:55:02|install|llvm-devel|20-639.1|x86_64||devel_tools_compiler|e5308addf7fc2f6629d8673d8f7c51a2d64f8b350dcec20908fc0b54f63e7bf73dd547673d2e3cb266d7293b667fa6914ecf4bbedcf24a9f05f793fc95aeb2c7| 2025-08-04 14:55:02|install|kmozillahelper|5.0.6-bp156.2.3.1|x86_64||repo-backports-update|f700a7da448bb28b8041237c0da511ef7c185c300d424e0a9b0d5fe907c9e6aa| 2025-08-04 14:55:05|install|MozillaThunderbird|140.1.0-150200.8.230.1|x86_64||repo-sle-update|d05f87c18c5a52444c03c07950267b80ab25d85155c82ed12e2e786ccf96b6ef| 2025-08-04 14:55:06|install|alsa-ucm-conf|1.2.10-150600.3.8.1|noarch||repo-sle-update|bebdf49214321c88f819fa2c760c323ec2c392d9dd966fae4641588dbec0dad8| 2025-08-04 14:55:06|install|apache2-manual|2.4.58-150600.5.35.1|noarch||repo-sle-update|1c378be636ced16b707429601950dfb43760af86c05546b9eb1b243796111df8|

1. 2025-08-04 14:55:07 apache2-prefork-2.4.58-150600.5.35.1.x86_64.rpm installed ok
2. Additional rpm output:
3. Requesting apache restart (all instances)

2025-08-04 14:55:07|install|apache2-prefork|2.4.58-150600.5.35.1|x86_64||repo-sle-update|43cb40e3c600306fb44274cd06640cf14ad1a22658a72536d9179e151401b2a3| 2025-08-04 14:55:07|install|apache2-utils|2.4.58-150600.5.35.1|x86_64||repo-sle-update|c9dde3af023734baa89bd680e7d00b48ee989798fed26d8509f00edbd3b7faf6| 2025-08-04 14:55:09|install|java-11-openjdk-headless|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|0d7d34a705a5b09e5919d731e50be2105b4c4fcada01f644da1fd5d56427d750| 2025-08-04 14:55:09|install|libsqlite3-0|3.50.2-150000.3.33.1|x86_64||repo-sle-update|42fd21bd429a1e4f41b52bc5712ba1f2c6ed9bb67a50992672ee98f3ea53dbbc| 2025-08-04 14:55:09|install|sqlite3|3.50.2-150000.3.33.1|x86_64||repo-sle-update|7e035b2698455e315dd138fbb424b7d6d1dfd63fe81edfb59f7e04158d2d0d15| 2025-08-04 14:55:09|install|sqlite3-tcl|3.50.2-150000.3.33.1|x86_64||repo-sle-update|20cb9d09ad5fc46faf921f7ff806d228c6a04804d8dd89a6f5ea42c7a5bd4577| 2025-08-04 14:55:10|install|yast2-packager|4.6.10-150600.3.3.1|x86_64||repo-sle-update|cf13dc5dbbb9d34da4500390565b42bf8ff88a83a1bf514d4b68cfe85e7a08e6| 2025-08-04 14:55:10|install|MozillaThunderbird-translations-common|140.1.0-150200.8.230.1|x86_64||repo-sle-update|a06da251ea93e1a75acf8ac5a962d802d19598225155b4b87fa119cc0efb2a42|

1. 2025-08-04 14:55:11 apache2-2.4.58-150600.5.35.1.x86_64.rpm installed ok
2. Additional rpm output:
3. Please check /etc/permissions.local for settings of /usr/sbin/suexec .
4. Updating /etc/sysconfig/apache2 ...
5. Requesting apache restart (all instances)

2025-08-04 14:55:11|install|apache2|2.4.58-150600.5.35.1|x86_64||repo-sle-update|1664d3cd611e6090798be19495359c12976bf574f5310c989e2ea62dfae32e50| 2025-08-04 14:55:11|install|java-11-openjdk|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|39be984b1799bdbc90d89710495e33e8081f02c192af819ad656c97f5b1f6eda| 2025-08-04 14:55:11|install|sqlite3-devel|3.50.2-150000.3.33.1|x86_64||repo-sle-update|46b1f19824e4202ab681981af1bbd03d0b619d2970505b095d591cc86322e89b| 2025-08-04 14:55:12|install|apache2-devel|2.4.58-150600.5.35.1|x86_64||repo-sle-update|7274bac7d40919fe65bc717b3ad8b9b8628da8bc041bbc054b6d3e14e76d73e1|

1. 2025-08-04 14:55:13 %posttrans(apache2-prefork-2.4.58-150600.5.35.1.x86_64) script output:
2. Restarting apache (all instances)

2025-08-04 14:55:14|patch |openSUSE-2025-283|1|noarch|repo-backports-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2672|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2613|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2666|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2684|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2660|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2546|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 15:57:23|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|install|libdjvulibre21|3.5.27-150200.11.17.1|x86_64||repo-sle-update|1c23e1246aa51371a039161a94023c894c525eae8ef7ad9e1b3ca6cb3fad682b| 2025-08-05 13:54:51|install|python-doc|2.7.18-150000.83.1|noarch||repo-sle-update|edf4affcbc576d8c57a8a47a988978bda82448ea9b079bdea416d7d101be02b7| 2025-08-05 13:54:52|install|python-doc-pdf|2.7.18-150000.83.1|noarch||repo-sle-update|0bd6b6669e56baf74c146abc8cf67f151043c8d3f0acfb29e6be01c1f1878902| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2703|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2701|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-06 14:26:15|command|root@cm26|'zypper' 'up'| 2025-08-06 14:26:16|install|libopenh264-8|2.6.0-2.sle150600.1|x86_64||repo-openh264|e69db207f4cc68a328f301d172deba5b01a705ffa355c55445dd1c787e274940| 2025-08-06 14:26:16|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64||repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-06 14:26:16|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64||repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-06 14:26:16|install|hwinfo|21.89-150500.3.12.1|x86_64||repo-sle-update|c317cb92b23549f431aec4eed80d404afb3696fd383e59762bfd438a39d7affb| 2025-08-06 14:26:16|install|libpython3_11-1_0|3.11.13-150600.3.35.1|x86_64||repo-sle-update|7cce50d079b3ca4e2400262f04f5f40e7dd2ad0aaf5f8d280e12ef48da4141fe| 2025-08-06 14:26:17|install|python311-base|3.11.13-150600.3.35.1|x86_64||repo-sle-update|9625750fe68ffedf508a9ad7017810eb3b80bcd56bf66524a4c636e84b8829a4| 2025-08-06 14:26:17|install|python311|3.11.13-150600.3.35.2|x86_64||repo-sle-update|f21b3ac71288810276c632a2812741315876a88ebc70db8725676235831556c0| 2025-08-06 14:26:17|install|python311-curses|3.11.13-150600.3.35.2|x86_64||repo-sle-update|7e7f4980631592315cae3eff001dc6aefccd2d00882d5b321c5f7363293b7f84| 2025-08-06 14:26:17|install|libsystemd0|254.27-150600.4.43.3|x86_64||repo-sle-update|c95566b16ebc099cb1cd3e176542c52205b06f132cfb699a2621cdcf69e49b16| 2025-08-06 14:26:17|install|libudev1|254.27-150600.4.43.3|x86_64||repo-sle-update|fb64712ccaa6f9d6c3bd48f0feaefbd4884affc32266a94bb43ff630d37a904a|

1. 2025-08-06 14:26:24 systemd-254.27-150600.4.43.3.x86_64.rpm installed ok
2. Additional rpm output:
3. /usr/lib/tmpfiles.d/inn.conf:1: Line references path below legacy directory /var/run/, updating /var/run/news → /run/news; please update the tmpfiles.d/ drop-in file accordingly.
4. /usr/lib/tmpfiles.d/nagios.conf:2: Line references path below legacy directory /var/run/, updating /var/run/nagios → /run/nagios; please update the tmpfiles.d/ drop-in file accordingly.

2025-08-06 14:26:24|install|systemd|254.27-150600.4.43.3|x86_64||repo-sle-update|8e1eb79e60344a723be2af579de0bae7b8d1c5a9b6d83909da9e6644b7f249b4| 2025-08-06 14:26:25|install|systemd-container|254.27-150600.4.43.3|x86_64||repo-sle-update|6c578090d9dc1351af0500fae60dbbe1286b7396932b6edc199a40e154f87a10| 2025-08-06 14:26:25|install|systemd-doc|254.27-150600.4.43.3|x86_64||repo-sle-update|c250b09c2fc6d4f61169faab2ff4c8cbd48985e5687f6351d257d76d59f29c83| 2025-08-06 14:26:25|install|python311-dbm|3.11.13-150600.3.35.2|x86_64||repo-sle-update|36cb2e01bb69b9c965737eb35c17d2abeee237fe83bd472be4ad2d48566065e5| 2025-08-06 14:26:29|install|udev|254.27-150600.4.43.3|x86_64||repo-sle-update|ca4c5c22e5d348b33988a28525a944d5c8ef6148c248aaca9e2d4f07611e0f6b| 2025-08-06 14:26:29|install|systemd-lang|254.27-150600.4.43.3|noarch||repo-sle-update|e12fb357b0cc0852ddbf4e6cbfc3fd2a65a3224241c40c7e2d670755966ba2eb| 2025-08-06 14:26:29|install|hwinfo-devel|21.89-150500.3.12.1|x86_64||repo-sle-update|deb9d6a6d42fc290b43c208db3fb6b4d059a745c33b8ed9a682204d2f111c9bd|

1. 2025-08-06 14:26:29 %posttrans(udev-254.27-150600.4.43.3.x86_64) script output:
2. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.53-default -f
3. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
4. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
5. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
6. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
7. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
8. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
9. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
10. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
11. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
12. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
13. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
14. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
15. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
16. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
17. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
18. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
19. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
20. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
21. dracut[I]: memstrack is not available
22. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
23. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
24. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
25. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
26. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
27. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
28. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
29. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
30. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
31. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
32. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
33. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
34. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
35. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
36. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
37. dracut[I]: memstrack is not available
38. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
39. dracut[I]: *** Including module: systemd ***
40. dracut[I]: *** Including module: systemd-initrd ***
41. dracut[I]: *** Including module: i18n ***
42. dracut[I]: *** Including module: drm ***
43. dracut[I]: *** Including module: plymouth ***
44. dracut[I]: *** Including module: btrfs ***
45. dracut[I]: *** Including module: kernel-modules ***
46. dracut[I]: *** Including module: kernel-modules-extra ***
47. dracut[I]: *** Including module: resume ***
48. dracut[I]: *** Including module: rootfs-block ***
49. dracut[I]: *** Including module: suse-btrfs ***
50. dracut[I]: *** Including module: suse-xfs ***
51. dracut[I]: *** Including module: terminfo ***
52. dracut[I]: *** Including module: udev-rules ***
53. dracut[I]: *** Including module: dracut-systemd ***
54. dracut[I]: *** Including module: haveged ***
55. dracut[I]: *** Including module: ostree ***
56. dracut[I]: *** Including module: usrmount ***
57. dracut[I]: *** Including module: base ***
58. dracut[I]: *** Including module: fs-lib ***
59. dracut[I]: *** Including module: shutdown ***
60. dracut[I]: *** Including module: suse ***
61. dracut[I]: *** Including module: suse-initrd ***
62. dracut[I]: *** Including modules done ***
63. dracut[I]: *** Installing kernel module dependencies ***
64. dracut[I]: *** Installing kernel module dependencies done ***
65. dracut[I]: *** Resolving executable dependencies ***
66. dracut[I]: *** Resolving executable dependencies done ***
67. dracut[I]: *** Hardlinking files ***
68. dracut[I]: *** Hardlinking files done ***
69. dracut[I]: *** Generating early-microcode cpio image ***
70. dracut[I]: *** Constructing AuthenticAMD.bin ***
71. dracut[I]: *** Store current command line parameters ***
72. dracut[I]: Stored kernel commandline:
73. dracut[I]: rd.driver.pre=btrfs
74. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
75. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
76. dracut[I]: *** Stripping files ***
77. dracut[I]: *** Stripping files done ***
78. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.53-default' ***
79. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.53-default' done ***
80. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.60-default -f
81. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
82. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
83. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
84. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
85. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
86. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
87. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
88. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
89. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
90. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
91. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
92. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
93. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
94. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
95. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
96. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
97. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
98. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
99. dracut[I]: memstrack is not available
100. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
101. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
102. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
103. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
104. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
105. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
106. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
107. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
108. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
109. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
110. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
111. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
112. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
113. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
114. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
115. dracut[I]: memstrack is not available
116. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
117. dracut[I]: *** Including module: systemd ***
118. dracut[I]: *** Including module: systemd-initrd ***
119. dracut[I]: *** Including module: i18n ***
120. dracut[I]: *** Including module: drm ***
121. dracut[I]: *** Including module: plymouth ***
122. dracut[I]: *** Including module: btrfs ***
123. dracut[I]: *** Including module: kernel-modules ***
124. dracut[I]: *** Including module: kernel-modules-extra ***
125. dracut[I]: *** Including module: resume ***
126. dracut[I]: *** Including module: rootfs-block ***
127. dracut[I]: *** Including module: suse-btrfs ***
128. dracut[I]: *** Including module: suse-xfs ***
129. dracut[I]: *** Including module: terminfo ***
130. dracut[I]: *** Including module: udev-rules ***
131. dracut[I]: *** Including module: dracut-systemd ***
132. dracut[I]: *** Including module: haveged ***
133. dracut[I]: *** Including module: ostree ***
134. dracut[I]: *** Including module: usrmount ***
135. dracut[I]: *** Including module: base ***
136. dracut[I]: *** Including module: fs-lib ***
137. dracut[I]: *** Including module: shutdown ***
138. dracut[I]: *** Including module: suse ***
139. dracut[I]: *** Including module: suse-initrd ***
140. dracut[I]: *** Including modules done ***
141. dracut[I]: *** Installing kernel module dependencies ***
142. dracut[I]: *** Installing kernel module dependencies done ***
143. dracut[I]: *** Resolving executable dependencies ***
144. dracut[I]: *** Resolving executable dependencies done ***
145. dracut[I]: *** Hardlinking files ***
146. dracut[I]: *** Hardlinking files done ***
147. dracut[I]: *** Generating early-microcode cpio image ***
148. dracut[I]: *** Constructing AuthenticAMD.bin ***
149. dracut[I]: *** Store current command line parameters ***
150. dracut[I]: Stored kernel commandline:
151. dracut[I]: rd.driver.pre=btrfs
152. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
153. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
154. dracut[I]: *** Stripping files ***
155. dracut[I]: *** Stripping files done ***
156. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.60-default' ***
157. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.60-default' done ***

2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2717|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2713|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2714|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 07:44:41|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:44:41|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64|root@cm26|repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-07 07:44:41|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64|root@cm26|repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-07 07:45:43|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:45:43|install|crypto-policies|20230920.570ea89-150600.3.12.1|noarch||repo-sle-update|4fa356ff142adf90186ea4770b7543bbe5769650d4da8dac5968fd73f97de8ba| 2025-08-07 07:45:43|patch |openSUSE-SLE-15.6-2025-2720|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 15:49:29|command|root@cm26|'/usr/bin/ruby.ruby2.5' '--encoding=utf-8' '/usr/lib/YaST2/bin/y2start' 'sw_single' 'qt' '-name' 'YaST2' '-icon' 'yast'| 2025-08-07 15:49:30|install|xsane|0.999-bp156.5.8|x86_64|root@cm26|repo-oss|3e87758c12fab61daf9fb6b47702c5040181c77c43b6fcdd804ee2ca791a9e8f38731de5a724aa9f70e1212aa4f950b600bcb3afe48f583439e12f0ddda046ea| 2025-08-08 15:10:39|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-08 15:10:39|install|perl-DBI|1.647.0-150600.12.6.1|x86_64||repo-sle-update|8dc0d1d560b06263d1fab86650bf4e76dc3fdd66bc537a6ca25f70059400f62b| 2025-08-08 15:10:39|install|python311-urllib3|2.0.7-150400.7.21.1|noarch||repo-sle-update|d45bcc3575f40b1a33bf4e2680dc86bcdc0ac7d9f68ccf1bfd192ed25e96d3c6| 2025-08-08 15:10:39|install|update-alternatives|1.19.0.4-150000.4.7.1|x86_64||repo-sle-update|2fa94871cf88a03490bf47e28dbe99f67b306e7ee71eadfa3d101fff5fd5b6bd| 2025-08-08 15:10:39|install|libruby2_5-2_5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|86da48a46d85fbfee262cafe7c5583391d88ba794f0f4acd6b408d1fe8272b9b| 2025-08-08 15:10:40|install|ruby2.5-stdlib|2.5.9-150000.4.46.1|x86_64||repo-sle-update|f3ad5fb18d5feffed499d8cf013ae4faa5780c19000ed58d197f0a06cafb24b8| 2025-08-08 15:10:40|install|ruby2.5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|5265dc9545031c6587772189a0d82ff43766835360ebf46f1a2f7d94318d5814| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2731|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2735|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2739|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2734|1|noarch|repo-sle-update|moderate|security|needed|applied|

Hi, Updating Ubuntu 24.03 to 23.10 something went wrong and the disk is no longer bootable. All the files appear to be there, but since its not bootable I can't export the data in the normal fashion.

I installed Ubuntu 24.04.3 LTS on a new disk, and mounted the unbootable disk on /oldDisk. My home directory and everything else appears to be intact.

What do I need to move from /oldDisk to the new install to get my address book and emails back?

until I get this fixed you can email me: <redacted>@evvette.net as my account address won't work... thanx in advance, Steve

We use the esr channel on all work computers to ensure they are as stable as possible. However, one PC updated to 142esr and one of the plugins we use no longer works. I can't see an easy way to get back to 128.14 and can't find the download file for it on Thunderbird or Mozilla websites. It doesn't make sense that I wouldn't be able to go back considering both updates were released on August 19th, but I'm not seeing how to get back.

Any suggestions?

I made a mistake. I had 128 and went up to 140. It pretty much looks the same, but a big difference is an extension I always use says it will not work with 140. I don't care how good 140 might be; if I can't use my app, QUICKTEXT, then I don't need this. How do I go back to 128 or to a version that works with my extension?

I was following instructions for the problem of some task bar icons showing as grey boxes. Still have that problem plus added the problem that thunderbird launches with the setup accounts dialogue page. The 'help>troubleshooting information>profile file location' reveals the correct profiles that have been updated to the hour before I caused the problem. I have saved the '...roaming/thunderbird folder to an external SSD, and made a new new thunderbird installation following the instructions for moving files to a new computer. Problem persists. Thunderbird will not 'see' the profiles therefore I cannot see my emails.

Trying to set up existing email address. When I type in info, it says "Configuration found ..." When I hit done, I get "unable to log in at server. Probably wrong configuration, username, or password."

I have a Mac and have been using Apple Mail. I'm not sure what to do next. I was able to open my Apple account, but that password does not appear to work.

Any suggestions as to what I'm doing wrong and how to fix it?

Thanks

<redacted>@icloud.com

This is minor, however, some addons that I need currently only work up to version 138. The version found at Index of /pub/thunderbird/releases/138.0.2/win64/ is actually version 139.x. I was able to download 138.0.1 at Index of /pub/thunderbird/releases/138.0.1/win64/

I just updated Thunderbird and any email earlier than 2/22/25 is gone. My sent items folder is empty and my address book is empty. Any email containing a link. The link will not work.

I hope there is a way to recover my missing data.