Thunderbird ஆதரவு மன்றம்

when clicking an email link this is shown

"Thunderbird is already running, but is not responding. To use Thunderbird, you must first close the existing Thunderbird process, restart your device, or use a different profile."

How do I make Thunderbird instead open a new email?

This is on Fedora

Hi,

Just updated to TB 115.10.1 and right on update it now fails to show the most recent emails in the inbox, They are there as I can scroll up to them but it no longer does that on it's own when opening and downloading the latest.

Any suggestions to get it back to normal operating condition?

Since the latest upgrade to 115.10.1 (64-bit) I have an issue about running Thunderbird.

From a clean Windows 11 start up it is OK but then if I then Exit and then try to run the bird again it does not start.

Digging around I discovered using Task Manager, a number of Thunderbird processes run after I had Exited. See attached.

Any thoughts?

I have tried to restore a backup made with Mozbackup. This was a bad idea. I now have 2 profiles xxxdefault-beta and yyy.default. So I asked Tbird to install from yyy.default where i've got my recent emails and it tried to import without success. I humbly ask for some options. Can I merge 2 profiles ie copy them into one profie folder? Can I hide/rename the profiles then delete Tbird and install anew? I promise on my grandmothers skateboard I will never use Mozbackup again, + . As an aside in appdata,local,tbird,profiles,yyy.default,cache2 there's a whole bunch of alphacoded files. what do these do?

Ta.

Hello

Yesterday there was update in Thunderbird and went well. But today, Thunderbird suddenly asking for credentials and then it went totally blank as in screenshot. There is nothing at all. But incoming mails are still showing up in windows notification and it can be opened as new tab of Thunderbird. I have been searching the possible cause and solution from forum and internet, but no luck. Can someone please help me about this ?

About 2 weeks ago, Thunderbird stopped sending emails. I spent a couple of hours on the phone with tech support but was unable to correct the issue. Changed all of the settings several times, SMTP server, port, security and authentication without success. Tech support suggested using their server but that's a pain. Attached are pictures of the error messages. Thanks.

Tim

Thunderbird updated to 115.10.1 (32-bit) and I cannot see any emails now. I use View > Folders > All. If I run a search, TB lists the emails. Have tried opening in Troubleshoot mode but still same, no emails nor inboxes. Windows Security Ransomware turned off for preparing for maintenance prior to TB updating itself. How should I go about fixing issue?

Windows 11, 64 bit Addons: Cardbook, Provider for Google Calendar

Since the 14/04/24 I can no longer receive or send any emails. I am using Windows 11 and am on a Lenova laptop and appears I have Thunderbird version 115.10.1. I have spoken to my internet provider at great length and they ending up saying that they could not help me any more and I had to contact Mozilla. When I try to receive emails I get a message saying this: Server mail.skymesh.com.au has disconnected. The server may have gone down or there may be a network problem. I am able to access my emails through my internet providers web emails also. I don't know of any more information that I can put in here so I will leave it at that and hope that someone out there can help me as I have absolutely no idea what to do next. I am not a computer person what so ever and will not be able to fix this on my own so any help will be appreciated but I will need details. Thanks in advance. Tam

I have my email account set with the order being descending date of arrival and the messages are unthreaded.

However, every time I get a new message in the account, it appears at the bottom of the list of messages. I only made one change to my email in Thunderbird when this started happening. Prior to me setting up a filter to search for amazon.com messages and direct them to a separate folder, the messages all appeared on top, in the correct date order. After, they appear on the bottom, even if I change to another folder or different email address and come back, the message is still at the bottom.

It is like when you have a folder open in Windows browser and then you save or modify files in that window, they reappear on the bottom.

Closing the program (like if you close a window) and reopening it causes the new message to appear where it should be. However, that is a substantial inconvenience. I have Thunderbird monitoring nine other e-mail accounts at present. None of them have a message filter. All of them show the email at the top of the page. New messages to my primary account appear at the bottom of the page even when I have Thunderbird showing the inbox of one of the other email accounts.

Using Windows 10, Thunderbird 115.10.1 (64-bit).

Any assistance would be appreciated.

Whenever I open my Thunderbird email application .. its constantly asking me to re enter all the passwords for the email accounts I have within the app .. I even select to save the password but its constantly asking me to enter it than i enter it and a minute later again it loses sync with the server and i have to re enter it again and again for each email I have linked within the app

I received the new version, Version 115.10.1, and the next morning I have emails going to other folders, 1261 junk files that had already been received over maybe the past week or so all received again AND not filtered to the junk folder but rather to the inbox. 2 emails moved from inbox to another folder. Train wreck.

I am using Thunderbird 115.10.1 on Windows 11. T keeps deleting my saved passwords. T takes a very long time to load. There are no saved passwords and I enter them all with the options to save. I check the passwords in Settings and they are all there correctly. When I next run Thunderbird it may or may not have them still saved. I check the Settings and they have gone; so I enter them again and they are saved OK. But then they are deleted some time later. I cannot see any pattern in the failure. I wonder if there is a problem with the outgoing server setttings. All the passwords are lost whether imap, pop (Ionos), hotmail or yahoo. Is there a way to clear out my profile or is this a problem with this T release. it did not happen until about 1-2 months ago. My profile is on a local NAS. Generally T seems to be quite unstable ; I get Not Responding too often.. Thanks

I get this message from Thunderbird on my desktop computer on app start up: ]Warning: Potential Security Risk Ahead

Thunderbird detected a potential security threat and did not continue to live.thunderbird.net. If you visit this site, attackers could try to steal information like your passwords, emails, or credit card details.

This started suddenly about a week ago.

I have Thunderbird on laptop that works fine.

How can fix this?

greig

Other than just the setup, how do I get Thunderbird to use "POP" rather than "IMAP" protocol for email? Until March of this year, I had Thunderbird setup as a "POP" client for email downloads from Frontier. And, then Frontier moved all of their email services to Yahoo and in the process, my Thunderbird wound up using "imap.mail.yahoo.com" instead of "pop3.frontier.com". I don't want IMAP - I want POP. So, I tried changing that in Thunderbird setup to "pop.mail.yahoo.com", but it does not respond.

Posted this before, got no answers, not even a "no, there's no cure for that." Hoping for better this time.... My inbox suffers from disappearing email sometimes, and using the properties>repair cure works okay as far as I can tell (if someone emails me and doesn't ask about it later, how would I know?). But it has happened frequently enough, half a dozen times a month or more, that I do the repair by default pretty much every day just to be safe. That's easy but still a pain. Does nobody in MozillaWorld know a more permanent solution to free me from my constant missed mail paranoia? As I said, a reasonably authoritative "No, there isn't" is perfectly fine and much better than radio silence. Regards!

Hello, I hope that this question is taken at face value. I Have tried working with the new UI since it was pushed and as of today I have had enough and I have reverted back to 102. there are a number of issues that have still not been addressed or fixed in 115 or 125 but the thing I keep finding increasingly infuriating is the UI. I understand UI is personal taste for some however for productivity changing the UI can be disastrous. it has been months since the release of 115. And the amount of time I have wasted because of the new UI is staggering. it is (to me and from what I am reading MANY others) extremely un-intuitive and tedious to use. I will not mention all the performance issues here as they are a separate issue. I would have liked to see an option to use the previous (read standard / tried and true) UI but since they did not, they appear to need an incentive to do such, so as the subject asks how much will it cost to add an option to revert the UI and how can we annotate that we would like it reverted as the donation page does not allow for notes or requests, and obviously the current leadership has a vision that is not in line with many users expectations.

I would like to reiterate this is not an attack on people who do like the new UI but a simple fact that many people appear to not like it and would like to be able to continue using the software both up to date and with a UI that actually makes sense to them since email clients have been virtually the same for over 2 decades now and that look and feel has become the de-facto standard in the industry for a reason.

TLDR: new UI is no longer intuitive to "industry standard" applications and I want to know how much it will cost to bring that back.

I have had message filters set up for a long time. Recently I tried to make some changes (adding one filter, deleting others, changing the response). I find that if I close Thunderbird and reopen it, all my changes are gone! How can I get the filter changes to stick?

I'm about the 100th person to have this problem, so I have spent the better part of two days looking at all the threads and possible fixes. Like all the others, with no warning, my TBird stopped being able to send messages through Spectrum. It did NOT start immediately after I updated TBird to 115.9.0 (in March) but just three days ago. I have three roadrunner addresses in TBird, and one other one associated with a website I have. All have the same problem. My phone and my iPad send messages just fine.

I tried all the fixes that worked for some. They didn't work for me; I continued to get various, inconsistent Send Message Errors. I have come back to the recommended Spectrum setup for the outgoing SMTP server: mail.twc.com, Security is STARTTLS, Port 587, Authentication is Normal Password, my username is my email address. Of course the problem is not fixed.

What DID work was putting TBird in Troubleshooting mode, using the Spectrum setup above. While that is adequate, I would much rather find out what is wrong. I have Matt's 10/7/23 11:56 AM answer to someone, asking for the Troubleshooting Information. I will be glad to supply that but I need an answer to this message in order to do that. Thanks! Demaris