• தீர்வுற்றது

Unable to transfer data from Version 128 to 139

I am trying to upgrade from 128 esr version to the new 139 version. I tried several ways to transfer data from the old version to the new version - I tried to export and… (மேலும் படிக்க)

I am trying to upgrade from 128 esr version to the new 139 version. I tried several ways to transfer data from the old version to the new version - I tried to export and import a the Thunderbird zip file. I also tried to open profile manager and creating a new profile that refers to a copy from my old version. Nothing has worked. In the old Thunderbird 128 version, if I select Help and Troubleshooting Information and then Open Folder next to the Profile Folder I get an error in Thunderbird that it can’t find my profile. I get the same error message when I go to Tools, export and select "open profile folder." This in spite of the fact that the old version continues to correctly display my contacts, tasks and events

After several hours of this, I finally decided to download version 139 using the standard Mozilla set up even though my Thunderbird 128 version is located someplace else. So, at this time I have two working versions of thunderbird on my computer – the old 128 version with all my data and the new 139 version with no data.

I think I need help figuring out which Profile has my contact, calendar and task data. Then I need help getting it to the new version.

Thanks

Luke

Asked by lukevhinternetmail 5 மாதங்களுக்கு முன்பு

Answered by christ1 5 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

TB is gone

Hi, folgendes Problem: plötzlich hatte ich keinen Zugang mehr zu TB, hab alles mögliche versucht, nix ging. Hab dann Update versucht, nix, dann neue Version runtergeladen… (மேலும் படிக்க)

Hi, folgendes Problem: plötzlich hatte ich keinen Zugang mehr zu TB, hab alles mögliche versucht, nix ging. Hab dann Update versucht, nix, dann neue Version runtergeladen, Meldung: A newer version of TB may have made changes to your profile.... etc. wie krieg ich das wieder hin ????

Asked by mowest9999 3 வாரங்களுக்கு முன்பு

Answered by Mapenzi 3 வாரங்களுக்கு முன்பு

  • தீர்வுற்றது

not sending SMTP email since update

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'. … (மேலும் படிக்க)

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'.

Here are the particulars to my system: john@cm26:~> sudo zypper if MozillaThunderbird Loading repository data... Reading installed packages...


Information for package MozillaThunderbird:

Repository  : Update repository with updates from SUSE Linux Enterprise 15 Name  : MozillaThunderbird Version  : 140.1.0-150200.8.230.1 Arch  : x86_64 Vendor  : SUSE LLC <https://www.suse.com/> Installed Size : 284.8 MiB Installed  : Yes Status  : up-to-date Source package : MozillaThunderbird-140.1.0-150200.8.230.1.src Upstream URL  : https://www.thunderbird.net/ Summary  : An integrated email, news feeds, chat, and newsgroups client Description  : 

   Thunderbird is a free, open-source, cross-platform application for
   managing email, news feeds, chat, and news groups. It is a local
   (rather than browser- or web-based) email application that is powerful
   yet easy to use.



   KDE

Information for pattern kde:

Repository  : Main Repository Name  : kde Version  : 20231206-lp156.2.2 Arch  : noarch Vendor  : openSUSE Installed  : Yes Visible to User : Yes Summary  : KDE Applications and Plasma 5 Desktop Description  : 

   Packages providing the Plasma desktop environment and applications from KDE.

Contents  : 

   S  | Name                        | Type    | Dependency
   ---+-----------------------------+---------+------------
   i+ | patterns-kde-kde            | package | Required
   i  | patterns-kde-kde_plasma     | package | Required
   i  | MozillaFirefox              | package | Recommended
   i  | ark                         | package | Recommended
   i  | avahi                       | package | Recommended
   i  | discover                    | package | Recommended
   i  | dolphin                     | package | Recommended
   i  | gwenview5                   | package | Recommended
   i  | kate                        | package | Recommended
   i  | kcalc                       | package | Recommended
   i  | kipi-plugins                | package | Recommended
   i  | konsole                     | package | Recommended
   i  | okular                      | package | Recommended
   i  | patterns-desktop-multimedia | package | Recommended
   i  | patterns-games-games        | package | Recommended
   i  | patterns-kde-kde_internet   | package | Recommended
      | patterns-kde-kde_pim        | package | Recommended
   i  | patterns-kde-kde_utilities  | package | Recommended
   i  | patterns-kde-kde_yast       | package | Recommended
   i  | patterns-office-office      | package | Recommended
   i  | skanlite                    | package | Recommended
   i  | spectacle                   | package | Recommended
   i  | yast2-control-center-qt     | package | Recommended



   SUSE

   Information for product Leap:

Repository  : Main Repository Name  : Leap Version  : 15.6-1 Arch  : x86_64 Vendor  : openSUSE End of Support  : 2025-12-30 Flavor  : dvd Is Base  : Yes Installed  : Yes Status  : up-to-date Update Repositories : --- CPE Name  : cpe:2.3:o:opensuse:leap:15.6:*:*:*:*:*:*:* Short Name  : openSUSE Leap Summary  : openSUSE Leap 15.6 Description  : 

   openSUSE Leap 15.6.

   KERNEL

john@cm26:~> uname -a Linux cm26 6.4.0-150600.23.60-default #1 SMP PREEMPT_DYNAMIC Tue Jul 1 14:43:49 UTC 2025 (6f98261) x86_64 x86_64 x86_64 GNU/Linux ___________________________________________________________________________________________-

Update particulars since the 8/4/2025

|root@cm26|'zypper' 'up'| 2025-08-04 14:55:01|install|libomp-devel|20-639.1|x86_64||devel_tools_compiler|1e51a50e5fce9250ba8f0022954c5ace3023e4e96f036caa5d9a332fb576648383f420fea778fef6c44a3973465c1e412b9d76369a2b5cf9bf09e803c2d27b55| 2025-08-04 14:55:02|install|llvm|20-639.1|x86_64||devel_tools_compiler|227efb182acf8ca11178437c1aa5392df7b533f6e5d66af6f04282cfb70b73e1365b8508084553ba5c6a6dd2c17e2d0991468c8b1cdb37ae92e40167b908e182| 2025-08-04 14:55:02|install|llvm-gold|20-639.1|x86_64||devel_tools_compiler|8ed08f0a486cce4a71fc01b5b619ca740820d86e4a65ecce3978e8fe4e3bd7d1bf3f2276a477ab72285b84073d1eb1af25786859eb3bc4d4867ba87c5d6769f3| 2025-08-04 14:55:02|install|llvm-polly|20-639.1|x86_64||devel_tools_compiler|eda6140297ac129aca87e3e46ee515145512a3d2cdc0c9b9eb60422c126ea6e6b8802b2921a4c1b0b321f90432e56d1a2cac924a199c49f3dcb4a9bd13bade9a| 2025-08-04 14:55:02|install|llvm-vim-plugins|20-639.1|noarch||devel_tools_compiler|5432e221a402b8944b39dd9e7c5da372021ada65a635cc85b7f3a0e908bbdc668a1f4c8f4282169852d08284b05e126e7825f5ed007953485d5dd38acccca0d8| 2025-08-04 14:55:02|install|llvm-polly-devel|20-639.1|x86_64||devel_tools_compiler|32680f5a310dcedc04d863fa5b6aadbdd2a6e4649900e5cee5e24ff6d8916f5fd491508ab3a5bc6fbef6b1fbb977a624a6a1e7633761c309dadef48dc8bc24f9| 2025-08-04 14:55:02|install|llvm-devel|20-639.1|x86_64||devel_tools_compiler|e5308addf7fc2f6629d8673d8f7c51a2d64f8b350dcec20908fc0b54f63e7bf73dd547673d2e3cb266d7293b667fa6914ecf4bbedcf24a9f05f793fc95aeb2c7| 2025-08-04 14:55:02|install|kmozillahelper|5.0.6-bp156.2.3.1|x86_64||repo-backports-update|f700a7da448bb28b8041237c0da511ef7c185c300d424e0a9b0d5fe907c9e6aa| 2025-08-04 14:55:05|install|MozillaThunderbird|140.1.0-150200.8.230.1|x86_64||repo-sle-update|d05f87c18c5a52444c03c07950267b80ab25d85155c82ed12e2e786ccf96b6ef| 2025-08-04 14:55:06|install|alsa-ucm-conf|1.2.10-150600.3.8.1|noarch||repo-sle-update|bebdf49214321c88f819fa2c760c323ec2c392d9dd966fae4641588dbec0dad8| 2025-08-04 14:55:06|install|apache2-manual|2.4.58-150600.5.35.1|noarch||repo-sle-update|1c378be636ced16b707429601950dfb43760af86c05546b9eb1b243796111df8|

  1. 2025-08-04 14:55:07 apache2-prefork-2.4.58-150600.5.35.1.x86_64.rpm installed ok
  2. Additional rpm output:
  3. Requesting apache restart (all instances)

2025-08-04 14:55:07|install|apache2-prefork|2.4.58-150600.5.35.1|x86_64||repo-sle-update|43cb40e3c600306fb44274cd06640cf14ad1a22658a72536d9179e151401b2a3| 2025-08-04 14:55:07|install|apache2-utils|2.4.58-150600.5.35.1|x86_64||repo-sle-update|c9dde3af023734baa89bd680e7d00b48ee989798fed26d8509f00edbd3b7faf6| 2025-08-04 14:55:09|install|java-11-openjdk-headless|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|0d7d34a705a5b09e5919d731e50be2105b4c4fcada01f644da1fd5d56427d750| 2025-08-04 14:55:09|install|libsqlite3-0|3.50.2-150000.3.33.1|x86_64||repo-sle-update|42fd21bd429a1e4f41b52bc5712ba1f2c6ed9bb67a50992672ee98f3ea53dbbc| 2025-08-04 14:55:09|install|sqlite3|3.50.2-150000.3.33.1|x86_64||repo-sle-update|7e035b2698455e315dd138fbb424b7d6d1dfd63fe81edfb59f7e04158d2d0d15| 2025-08-04 14:55:09|install|sqlite3-tcl|3.50.2-150000.3.33.1|x86_64||repo-sle-update|20cb9d09ad5fc46faf921f7ff806d228c6a04804d8dd89a6f5ea42c7a5bd4577| 2025-08-04 14:55:10|install|yast2-packager|4.6.10-150600.3.3.1|x86_64||repo-sle-update|cf13dc5dbbb9d34da4500390565b42bf8ff88a83a1bf514d4b68cfe85e7a08e6| 2025-08-04 14:55:10|install|MozillaThunderbird-translations-common|140.1.0-150200.8.230.1|x86_64||repo-sle-update|a06da251ea93e1a75acf8ac5a962d802d19598225155b4b87fa119cc0efb2a42|

  1. 2025-08-04 14:55:11 apache2-2.4.58-150600.5.35.1.x86_64.rpm installed ok
  2. Additional rpm output:
  3. Please check /etc/permissions.local for settings of /usr/sbin/suexec .
  4. Updating /etc/sysconfig/apache2 ...
  5. Requesting apache restart (all instances)

2025-08-04 14:55:11|install|apache2|2.4.58-150600.5.35.1|x86_64||repo-sle-update|1664d3cd611e6090798be19495359c12976bf574f5310c989e2ea62dfae32e50| 2025-08-04 14:55:11|install|java-11-openjdk|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|39be984b1799bdbc90d89710495e33e8081f02c192af819ad656c97f5b1f6eda| 2025-08-04 14:55:11|install|sqlite3-devel|3.50.2-150000.3.33.1|x86_64||repo-sle-update|46b1f19824e4202ab681981af1bbd03d0b619d2970505b095d591cc86322e89b| 2025-08-04 14:55:12|install|apache2-devel|2.4.58-150600.5.35.1|x86_64||repo-sle-update|7274bac7d40919fe65bc717b3ad8b9b8628da8bc041bbc054b6d3e14e76d73e1|

  1. 2025-08-04 14:55:13 %posttrans(apache2-prefork-2.4.58-150600.5.35.1.x86_64) script output:
  2. Restarting apache (all instances)

2025-08-04 14:55:14|patch |openSUSE-2025-283|1|noarch|repo-backports-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2672|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2613|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2666|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2684|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2660|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2546|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 15:57:23|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|install|libdjvulibre21|3.5.27-150200.11.17.1|x86_64||repo-sle-update|1c23e1246aa51371a039161a94023c894c525eae8ef7ad9e1b3ca6cb3fad682b| 2025-08-05 13:54:51|install|python-doc|2.7.18-150000.83.1|noarch||repo-sle-update|edf4affcbc576d8c57a8a47a988978bda82448ea9b079bdea416d7d101be02b7| 2025-08-05 13:54:52|install|python-doc-pdf|2.7.18-150000.83.1|noarch||repo-sle-update|0bd6b6669e56baf74c146abc8cf67f151043c8d3f0acfb29e6be01c1f1878902| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2703|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2701|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-06 14:26:15|command|root@cm26|'zypper' 'up'| 2025-08-06 14:26:16|install|libopenh264-8|2.6.0-2.sle150600.1|x86_64||repo-openh264|e69db207f4cc68a328f301d172deba5b01a705ffa355c55445dd1c787e274940| 2025-08-06 14:26:16|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64||repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-06 14:26:16|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64||repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-06 14:26:16|install|hwinfo|21.89-150500.3.12.1|x86_64||repo-sle-update|c317cb92b23549f431aec4eed80d404afb3696fd383e59762bfd438a39d7affb| 2025-08-06 14:26:16|install|libpython3_11-1_0|3.11.13-150600.3.35.1|x86_64||repo-sle-update|7cce50d079b3ca4e2400262f04f5f40e7dd2ad0aaf5f8d280e12ef48da4141fe| 2025-08-06 14:26:17|install|python311-base|3.11.13-150600.3.35.1|x86_64||repo-sle-update|9625750fe68ffedf508a9ad7017810eb3b80bcd56bf66524a4c636e84b8829a4| 2025-08-06 14:26:17|install|python311|3.11.13-150600.3.35.2|x86_64||repo-sle-update|f21b3ac71288810276c632a2812741315876a88ebc70db8725676235831556c0| 2025-08-06 14:26:17|install|python311-curses|3.11.13-150600.3.35.2|x86_64||repo-sle-update|7e7f4980631592315cae3eff001dc6aefccd2d00882d5b321c5f7363293b7f84| 2025-08-06 14:26:17|install|libsystemd0|254.27-150600.4.43.3|x86_64||repo-sle-update|c95566b16ebc099cb1cd3e176542c52205b06f132cfb699a2621cdcf69e49b16| 2025-08-06 14:26:17|install|libudev1|254.27-150600.4.43.3|x86_64||repo-sle-update|fb64712ccaa6f9d6c3bd48f0feaefbd4884affc32266a94bb43ff630d37a904a|

  1. 2025-08-06 14:26:24 systemd-254.27-150600.4.43.3.x86_64.rpm installed ok
  2. Additional rpm output:
  3. /usr/lib/tmpfiles.d/inn.conf:1: Line references path below legacy directory /var/run/, updating /var/run/news → /run/news; please update the tmpfiles.d/ drop-in file accordingly.
  4. /usr/lib/tmpfiles.d/nagios.conf:2: Line references path below legacy directory /var/run/, updating /var/run/nagios → /run/nagios; please update the tmpfiles.d/ drop-in file accordingly.

2025-08-06 14:26:24|install|systemd|254.27-150600.4.43.3|x86_64||repo-sle-update|8e1eb79e60344a723be2af579de0bae7b8d1c5a9b6d83909da9e6644b7f249b4| 2025-08-06 14:26:25|install|systemd-container|254.27-150600.4.43.3|x86_64||repo-sle-update|6c578090d9dc1351af0500fae60dbbe1286b7396932b6edc199a40e154f87a10| 2025-08-06 14:26:25|install|systemd-doc|254.27-150600.4.43.3|x86_64||repo-sle-update|c250b09c2fc6d4f61169faab2ff4c8cbd48985e5687f6351d257d76d59f29c83| 2025-08-06 14:26:25|install|python311-dbm|3.11.13-150600.3.35.2|x86_64||repo-sle-update|36cb2e01bb69b9c965737eb35c17d2abeee237fe83bd472be4ad2d48566065e5| 2025-08-06 14:26:29|install|udev|254.27-150600.4.43.3|x86_64||repo-sle-update|ca4c5c22e5d348b33988a28525a944d5c8ef6148c248aaca9e2d4f07611e0f6b| 2025-08-06 14:26:29|install|systemd-lang|254.27-150600.4.43.3|noarch||repo-sle-update|e12fb357b0cc0852ddbf4e6cbfc3fd2a65a3224241c40c7e2d670755966ba2eb| 2025-08-06 14:26:29|install|hwinfo-devel|21.89-150500.3.12.1|x86_64||repo-sle-update|deb9d6a6d42fc290b43c208db3fb6b4d059a745c33b8ed9a682204d2f111c9bd|

  1. 2025-08-06 14:26:29 %posttrans(udev-254.27-150600.4.43.3.x86_64) script output:
  2. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.53-default -f
  3. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  4. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  5. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
  6. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
  7. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
  8. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  9. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  10. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  11. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  12. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  13. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  14. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  15. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  16. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  17. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  18. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  19. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
  20. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  21. dracut[I]: memstrack is not available
  22. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  23. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  24. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  25. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  26. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  27. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  28. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  29. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  30. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  31. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  32. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  33. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  34. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  35. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  36. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  37. dracut[I]: memstrack is not available
  38. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  39. dracut[I]: *** Including module: systemd ***
  40. dracut[I]: *** Including module: systemd-initrd ***
  41. dracut[I]: *** Including module: i18n ***
  42. dracut[I]: *** Including module: drm ***
  43. dracut[I]: *** Including module: plymouth ***
  44. dracut[I]: *** Including module: btrfs ***
  45. dracut[I]: *** Including module: kernel-modules ***
  46. dracut[I]: *** Including module: kernel-modules-extra ***
  47. dracut[I]: *** Including module: resume ***
  48. dracut[I]: *** Including module: rootfs-block ***
  49. dracut[I]: *** Including module: suse-btrfs ***
  50. dracut[I]: *** Including module: suse-xfs ***
  51. dracut[I]: *** Including module: terminfo ***
  52. dracut[I]: *** Including module: udev-rules ***
  53. dracut[I]: *** Including module: dracut-systemd ***
  54. dracut[I]: *** Including module: haveged ***
  55. dracut[I]: *** Including module: ostree ***
  56. dracut[I]: *** Including module: usrmount ***
  57. dracut[I]: *** Including module: base ***
  58. dracut[I]: *** Including module: fs-lib ***
  59. dracut[I]: *** Including module: shutdown ***
  60. dracut[I]: *** Including module: suse ***
  61. dracut[I]: *** Including module: suse-initrd ***
  62. dracut[I]: *** Including modules done ***
  63. dracut[I]: *** Installing kernel module dependencies ***
  64. dracut[I]: *** Installing kernel module dependencies done ***
  65. dracut[I]: *** Resolving executable dependencies ***
  66. dracut[I]: *** Resolving executable dependencies done ***
  67. dracut[I]: *** Hardlinking files ***
  68. dracut[I]: *** Hardlinking files done ***
  69. dracut[I]: *** Generating early-microcode cpio image ***
  70. dracut[I]: *** Constructing AuthenticAMD.bin ***
  71. dracut[I]: *** Store current command line parameters ***
  72. dracut[I]: Stored kernel commandline:
  73. dracut[I]: rd.driver.pre=btrfs
  74. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
  75. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
  76. dracut[I]: *** Stripping files ***
  77. dracut[I]: *** Stripping files done ***
  78. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.53-default' ***
  79. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.53-default' done ***
  80. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.60-default -f
  81. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  82. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  83. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
  84. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
  85. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
  86. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  87. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  88. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  89. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  90. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  91. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  92. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  93. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  94. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  95. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  96. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  97. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
  98. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  99. dracut[I]: memstrack is not available
  100. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  101. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
  102. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
  103. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
  104. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
  105. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
  106. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
  107. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
  108. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
  109. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
  110. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
  111. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
  112. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
  113. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
  114. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
  115. dracut[I]: memstrack is not available
  116. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
  117. dracut[I]: *** Including module: systemd ***
  118. dracut[I]: *** Including module: systemd-initrd ***
  119. dracut[I]: *** Including module: i18n ***
  120. dracut[I]: *** Including module: drm ***
  121. dracut[I]: *** Including module: plymouth ***
  122. dracut[I]: *** Including module: btrfs ***
  123. dracut[I]: *** Including module: kernel-modules ***
  124. dracut[I]: *** Including module: kernel-modules-extra ***
  125. dracut[I]: *** Including module: resume ***
  126. dracut[I]: *** Including module: rootfs-block ***
  127. dracut[I]: *** Including module: suse-btrfs ***
  128. dracut[I]: *** Including module: suse-xfs ***
  129. dracut[I]: *** Including module: terminfo ***
  130. dracut[I]: *** Including module: udev-rules ***
  131. dracut[I]: *** Including module: dracut-systemd ***
  132. dracut[I]: *** Including module: haveged ***
  133. dracut[I]: *** Including module: ostree ***
  134. dracut[I]: *** Including module: usrmount ***
  135. dracut[I]: *** Including module: base ***
  136. dracut[I]: *** Including module: fs-lib ***
  137. dracut[I]: *** Including module: shutdown ***
  138. dracut[I]: *** Including module: suse ***
  139. dracut[I]: *** Including module: suse-initrd ***
  140. dracut[I]: *** Including modules done ***
  141. dracut[I]: *** Installing kernel module dependencies ***
  142. dracut[I]: *** Installing kernel module dependencies done ***
  143. dracut[I]: *** Resolving executable dependencies ***
  144. dracut[I]: *** Resolving executable dependencies done ***
  145. dracut[I]: *** Hardlinking files ***
  146. dracut[I]: *** Hardlinking files done ***
  147. dracut[I]: *** Generating early-microcode cpio image ***
  148. dracut[I]: *** Constructing AuthenticAMD.bin ***
  149. dracut[I]: *** Store current command line parameters ***
  150. dracut[I]: Stored kernel commandline:
  151. dracut[I]: rd.driver.pre=btrfs
  152. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
  153. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
  154. dracut[I]: *** Stripping files ***
  155. dracut[I]: *** Stripping files done ***
  156. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.60-default' ***
  157. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.60-default' done ***

2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2717|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2713|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2714|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 07:44:41|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:44:41|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64|root@cm26|repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-07 07:44:41|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64|root@cm26|repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-07 07:45:43|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:45:43|install|crypto-policies|20230920.570ea89-150600.3.12.1|noarch||repo-sle-update|4fa356ff142adf90186ea4770b7543bbe5769650d4da8dac5968fd73f97de8ba| 2025-08-07 07:45:43|patch |openSUSE-SLE-15.6-2025-2720|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 15:49:29|command|root@cm26|'/usr/bin/ruby.ruby2.5' '--encoding=utf-8' '/usr/lib/YaST2/bin/y2start' 'sw_single' 'qt' '-name' 'YaST2' '-icon' 'yast'| 2025-08-07 15:49:30|install|xsane|0.999-bp156.5.8|x86_64|root@cm26|repo-oss|3e87758c12fab61daf9fb6b47702c5040181c77c43b6fcdd804ee2ca791a9e8f38731de5a724aa9f70e1212aa4f950b600bcb3afe48f583439e12f0ddda046ea| 2025-08-08 15:10:39|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-08 15:10:39|install|perl-DBI|1.647.0-150600.12.6.1|x86_64||repo-sle-update|8dc0d1d560b06263d1fab86650bf4e76dc3fdd66bc537a6ca25f70059400f62b| 2025-08-08 15:10:39|install|python311-urllib3|2.0.7-150400.7.21.1|noarch||repo-sle-update|d45bcc3575f40b1a33bf4e2680dc86bcdc0ac7d9f68ccf1bfd192ed25e96d3c6| 2025-08-08 15:10:39|install|update-alternatives|1.19.0.4-150000.4.7.1|x86_64||repo-sle-update|2fa94871cf88a03490bf47e28dbe99f67b306e7ee71eadfa3d101fff5fd5b6bd| 2025-08-08 15:10:39|install|libruby2_5-2_5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|86da48a46d85fbfee262cafe7c5583391d88ba794f0f4acd6b408d1fe8272b9b| 2025-08-08 15:10:40|install|ruby2.5-stdlib|2.5.9-150000.4.46.1|x86_64||repo-sle-update|f3ad5fb18d5feffed499d8cf013ae4faa5780c19000ed58d197f0a06cafb24b8| 2025-08-08 15:10:40|install|ruby2.5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|5265dc9545031c6587772189a0d82ff43766835360ebf46f1a2f7d94318d5814| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2731|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2735|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2739|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2734|1|noarch|repo-sle-update|moderate|security|needed|applied|

Asked by jcmcgil 2 மாதங்களுக்கு முன்பு

Answered by Wayne Mery 3 வாரங்களுக்கு முன்பு

  • தீர்வுற்றது

Manually move old email and addressbook from unbootable disk to new install

Hi, Updating Ubuntu 24.03 to 23.10 something went wrong and the disk is no longer bootable. All the files appear to be there, but since its not bootable I can't export th… (மேலும் படிக்க)

Hi, Updating Ubuntu 24.03 to 23.10 something went wrong and the disk is no longer bootable. All the files appear to be there, but since its not bootable I can't export the data in the normal fashion.

I installed Ubuntu 24.04.3 LTS on a new disk, and mounted the unbootable disk on /oldDisk. My home directory and everything else appears to be intact.

What do I need to move from /oldDisk to the new install to get my address book and emails back?

until I get this fixed you can email me: <redacted>@evvette.net as my account address won't work... thanx in advance, Steve

Asked by Steven 2 மாதங்களுக்கு முன்பு

Answered by Steven 1 மாதத்திற்கு முன்பு

  • தீர்வுற்றது

Downgrading from 142esr to 128esr

We use the esr channel on all work computers to ensure they are as stable as possible. However, one PC updated to 142esr and one of the plugins we use no longer works. I … (மேலும் படிக்க)

We use the esr channel on all work computers to ensure they are as stable as possible. However, one PC updated to 142esr and one of the plugins we use no longer works. I can't see an easy way to get back to 128.14 and can't find the download file for it on Thunderbird or Mozilla websites. It doesn't make sense that I wouldn't be able to go back considering both updates were released on August 19th, but I'm not seeing how to get back.

Any suggestions?

Asked by noah3 2 மாதங்களுக்கு முன்பு

Answered by Michel T 2 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது
  • Archived

Updated Thunderbird and now Menu bar is no longer in English

I updated to Thunderbird 115.18.0 which is apparently the latest that will run on my Mid 2011 iMac with MacOS 10.13.6 (High Sierra). I updated following the link(s) in th… (மேலும் படிக்க)

I updated to Thunderbird 115.18.0 which is apparently the latest that will run on my Mid 2011 iMac with MacOS 10.13.6 (High Sierra). I updated following the link(s) in the About Thunderbird drop down

However, the Menu Bar is in a foreign language (see image) and I can't find where to fix it. It looks like the wrong update file was grabbed so I need to find a download for Thunderbird 115.18.0 in English for an Intel iMac and High Sierra.

Asked by romad 6 மாதங்களுக்கு முன்பு

Answered by Toad-Hall 6 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Windows 10 is changing to Windows 11

Microsoft is changing from Windows 10 to Windows 11 this October and I was wondering whether Mozilla Thunderbird emails will still work with Windows 11?.

Asked by peter5661 3 மாதங்களுக்கு முன்பு

Answered by MarkRH 3 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Quicktext incompatible with version 140

I made a mistake. I had 128 and went up to 140. It pretty much looks the same, but a big difference is an extension I always use says it will not work with 140. I don't c… (மேலும் படிக்க)

I made a mistake. I had 128 and went up to 140. It pretty much looks the same, but a big difference is an extension I always use says it will not work with 140. I don't care how good 140 might be; if I can't use my app, QUICKTEXT, then I don't need this. How do I go back to 128 or to a version that works with my extension?

Asked by Michael Evangelo 4 மாதங்களுக்கு முன்பு

Answered by sfhowes 4 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

the create button doesn't work

the create button doesn't work. how to activate the button? is it possible to roll back the update?

Asked by Артур Хайруллин 3 மாதங்களுக்கு முன்பு

Answered by david 3 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

thunderbird won't 'see' profiles

I was following instructions for the problem of some task bar icons showing as grey boxes. Still have that problem plus added the problem that thunderbird launches with t… (மேலும் படிக்க)

I was following instructions for the problem of some task bar icons showing as grey boxes. Still have that problem plus added the problem that thunderbird launches with the setup accounts dialogue page. The 'help>troubleshooting information>profile file location' reveals the correct profiles that have been updated to the hour before I caused the problem. I have saved the '...roaming/thunderbird folder to an external SSD, and made a new new thunderbird installation following the instructions for moving files to a new computer. Problem persists. Thunderbird will not 'see' the profiles therefore I cannot see my emails.

Asked by mail1780 4 மாதங்களுக்கு முன்பு

Answered by Mapenzi 3 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Setting up my existing email address

Trying to set up existing email address. When I type in info, it says "Configuration found ..." When I hit done, I get "unable to log in at server. Probably wrong configu… (மேலும் படிக்க)

Trying to set up existing email address. When I type in info, it says "Configuration found ..." When I hit done, I get "unable to log in at server. Probably wrong configuration, username, or password." 

I have a Mac and have been using Apple Mail. I'm not sure what to do next. I was able to open my Apple account, but that password does not appear to work.

Any suggestions as to what I'm doing wrong and how to fix it?

Thanks

<redacted>@icloud.com

Asked by jayoung3 4 மாதங்களுக்கு முன்பு

Answered by david 3 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Index of /pub/thunderbird/releases/138.0.2/win64/

This is minor, however, some addons that I need currently only work up to version 138. The version found at Index of /pub/thunderbird/releases/138.0.2/win64/ is actually … (மேலும் படிக்க)

This is minor, however, some addons that I need currently only work up to version 138. The version found at Index of /pub/thunderbird/releases/138.0.2/win64/ is actually version 139.x. I was able to download 138.0.1 at Index of /pub/thunderbird/releases/138.0.1/win64/

Asked by Chef 4 மாதங்களுக்கு முன்பு

Answered by Wayne Mery 4 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Update lost most of my data

I just updated Thunderbird and any email earlier than 2/22/25 is gone. My sent items folder is empty and my address book is empty. Any email containing a link. The lin… (மேலும் படிக்க)

I just updated Thunderbird and any email earlier than 2/22/25 is gone. My sent items folder is empty and my address book is empty. Any email containing a link. The link will not work.

I hope there is a way to recover my missing data.

Asked by roblos 4 மாதங்களுக்கு முன்பு

Answered by Googlethunderbird. 4 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

The icon for mozilla thunderbird

My desktop icon for Mozilla Thunderbird has disappeared. How do I get it back so I can access my emails? M

Asked by Clara 4 மாதங்களுக்கு முன்பு

Answered by david 4 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Thunderbird version 128.11.0esr

I am currently running Thunderbird version 128.11.0esr on Windows 11 on a Dell desktop computer. I have been running Thunderbird for years. But back in February 2025 my… (மேலும் படிக்க)

I am currently running Thunderbird version 128.11.0esr on Windows 11 on a Dell desktop computer.

I have been running Thunderbird for years. But back in February 2025 my previous Dell desktop died, so had to purchase a new Dell desktop running Windows 11. Then I downloaded Thunderbird and installed it on the new desktop then copied over the profiles that fortunately had been backed up just a week prior. It has been working fine. (When I installed the Thunderbird on the new computer I did not realize there was a difference between ESR (Extended Support Release) channel and Release channel; I just downloaded and installed what I came upon.)

However, around 5/28/25 got a pop-up message that stated something to the effect it is recommended I upgrade to Thunderbird Release.

Should I download and install a new Thunderbird from the Release channel? Will the existing profiles work with the Release channel Thunderbird? Thank you for your help.

Asked by James W. 5 மாதங்களுக்கு முன்பு

Answered by Ed 5 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

New Thunderbird release

I am trying to upgrade from ESR to Release. I saved my profile successfully, went to the install page and clicked Download. Got a request to donate, which I did. Then … (மேலும் படிக்க)

I am trying to upgrade from ESR to Release. I saved my profile successfully, went to the install page and clicked Download. Got a request to donate, which I did. Then I got a page saying Thank you, Finish installing and enjoy Thunderbird. But there is no way to finish installing and I never got a download file. I've tried multiple times, nothing happens. Help!

Asked by maggie.jacobs 5 மாதங்களுக்கு முன்பு

Answered by maggie.jacobs 5 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Outlook Email and Calendar Sync. Version 138 vs 139

I just purchased a new laptop and am trying to get Thunderbird up and running. I have an outlook email account and use it's calendar. On my previous laptop (manjaro linux… (மேலும் படிக்க)

I just purchased a new laptop and am trying to get Thunderbird up and running. I have an outlook email account and use it's calendar. On my previous laptop (manjaro linux) I ran Thunderbird version 138.0 which allowed me to install TBSync and customize via the chrome file. It worked great at bringing the calendar over to Thunderbird. Now, on my new laptop (also Manjaro Linux) the package manager is only presenting version 139+ to install but TBSync does not work on this version of Thunderbird and I can't figure out how to install Thunderbird version 138 on the new laptop.

So, I need help either syncing my calendar in thunderbird version 139 to my outlook account or on how to install thunderbird version 138 so I can add TBSync. I've downloaded the file for version 138 but don't know how to install it. This shouldn't be so difficult.

Your assistance is greatly appreciated.

Asked by james.a.hill 5 மாதங்களுக்கு முன்பு

Answered by sfhowes 5 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது
  • Archived

135.0.1 Mozilla Browser: have found that the file SAVING-function in the 'Application Menu' does NOT PROPERLY WORK!

thorsak Today at 12:21 PM thorsak 2/23/25, 2:49 PM February 23, 2025 Hi: I've just recently installed 135.0.1 Mozilla Browser and have found that the file SAVING-funct… (மேலும் படிக்க)

thorsak Today at 12:21 PM

thorsak 2/23/25, 2:49 PM

February 23, 2025

Hi: I've just recently installed 135.0.1 Mozilla Browser and have found that the file SAVING-function in the 'Application Menu' does NOT PROPERLY WORK: it records my message-title but NOT the contents (0-bytes!) -I never had such a basic issue in many years of very satisfactory Browser-use ...am I have a wrong setting somewhere and is there any quick fix please ...? - Email me when someone answers the thread ...MANY THANKS, Tony H.

P.S.: Please send me a link where I'd get a help since I'm NOT GETTING ANY HELP FOR SEVERAL WEEKS ...! Thanks-Tony H.

Asked by thorsak 8 மாதங்களுக்கு முன்பு

Answered by Matt 8 மாதங்களுக்கு முன்பு

  • தீர்வுற்றது

Update failure - SEC_ERROR_OCSP_FUTURE_RESPONSE

SEC_ERROR_OCSP_FUTURE_RESPONSE I got this while updating. Computer was off for 11 days (i hospital). Now I can't load my email. There are several PDF's of medical test … (மேலும் படிக்க)

SEC_ERROR_OCSP_FUTURE_RESPONSE

I got this while updating. Computer was off for 11 days (i hospital). Now I can't load my email. There are several PDF's of medical test requests and reports urgently needed to print. I can see my mail waiting on the server using my phone, but my desktop (Thunderbird) is the only one that will allow me to print.

<redacted>@rogers.com

Asked by jgb 5 மாதங்களுக்கு முன்பு

Answered by christ1 5 மாதங்களுக்கு முன்பு