அனைத்துத் தயாரிப்புகள் ஆதரவு மன்றம்

There are 2 processes involved in Firefox Sync, and 0 differentiation between them in the language used to describe what Firefox Sync does in any of the documentation, this makes nearly every discussion on the topic highly confusing to borderline misleading.

When you press Sync, you are pushing settings to Firefox servers. When you sign in to Sync, you are pulling settings from Firefox servers.

Both of these steps are referred to interchangeably as "syncing" and there is next to no documentation of what causes each to occur nor what they actually do.

Why is this dangerous you might ask? Well, let's say I buy a new computer, I want to set it up the same way I use all my devices, so I sign in to sync to synchronize my settings, makes perfect sense. Nothing tells me anything is happening when I sign in, so I click the sync button because I want to synchronize my settings with my other devices. Big mistake. I've just overwritten the server-side sync profile with a default Firefox profile. You know how you fix that? You sign in and press the sync button to overwrite the sync profile again. But you know what happens when you sign in? You become synced with the now blank sync profile and lose all the settings that you want to be pushing to the sync profile. This just happened to me. Thankfully I was only choosing to sync add-ons and options AT THE TIME and I have backups that are about 6 months old and I rarely change settings, but some things like my homepage URLs are something that I do change fairly often, and I'm sure some additional sites were whitelisted since by default I just reject all cookies. I also thankfully use policies.json to block updates so I didn't immediately get assaulted by that too.

SO! I HIGHLY suggest that when merely signing in to Sync, the default should be for syncing to be off to start off with, so that you can choose what to "sync" BEFORE it occurs. However, because of the language, the question arises, what am I choosing to sync for? Am I choosing what to PULL from servers? Or am I choosing what gets PUSHED to the servers? When syncing is turned on, does that mean I an pulling the settings that I have chosen? Or am I am pulling ALL settings while only pushing what I have chosen IF I click the Sync button? Or do I push EVERYTHING?

It's incredibly unclear how the Sync feature works and both of the "main" articles on it are completely useless for understanding it because the term "sync" is used interchangeably for pushing or pulling settings.

https://support.mozilla.org/en-US/kb/how-do-i-choose-what-information-sync-firefox https://support.mozilla.org/en-US/kb/sync-custom-preferences

What are the correct steps to rectify this horrid situation? Sign-in, set-up sync, choose "Options" and "Add-Ons" again, THEN copy over the backup settings, THEN Sync them to the "cloud"? If I have 2 different devices setup with sync, and 1 chooses to sync options and the other chooses to sync bookmarks, then I click sync on BOTH devices repeatedly, what occurs?

The New Tab page includes some shortcuts by default, including Amazon Search (see "@amazon" in the attached picture), which I dismissed shortly after installation. (The only options are "Pin/Unpin" and "Dismiss".)

However, I want to create such shortcut for another search engine, like https://duckduckgo.com/?q=%s&iax=images&ia=images and I don't see the option - even if I set the URL to include "%s" and the name of the pinned shortcut begins with "@", as with smart keyword search and the Amazon search shortcut, respectively.

I am an advanced user and don't mind manually editing files in my profile folder (after I back it up of course).

Edit: I found a reference to it in prefs.js in my profile but changing it using user.js only caused the user_pref to disappear with no effect on the tile items. user_pref("browser.newtabpage.pinned", "[null,null,null,null,{\"url\":\"https://www.amazon.com/\",\"label\":\"@amazon\",\"searchTopSite\":true},null]");

Hi, I spent several hours trying just to change the color of the downloads icon (thought it would take me 1 minute). First I tried to do it myself, then searched the internet. From what I found on the internet, some stuff doesn't work, some works partially and in an unexpected way, most of it is difficult to understand and modify. Finally I give up. Please, is it possible to make white the download pie and the arrow thing (when the download is finished). That's all I ask for. If possible, without using the var-- stuff, just using fill: or filter: or some other straightforward functions.

This is specific to one website, but it is both new and unique to Firefox. https://playclassic.games/games/turn-based-strategy-dos-games-online/play-sid-meiers-colonization-online/play/

Prior to the last two <Firefox> updates (too many, too frequently!), no problem. Both keyboard and mouse were recognized. Since then, only the mouse, although everything's fine when I use Chrome.

Yes, I'm on the latest version, and have cleared caches and rebooted ... after every new version.

Getting sick of FireFox, I want to search from the GOOGLE SEARCH BAR, not the address bar, but the settings don't work you can choose to have the search bar next to the address bar, but it doesn't work, the google search bar doesn't work either, no matter what setting, your search ends up in the address bar, with all the updates, they don't fix crap on here, when someone makes a complaint, FIX THE CRAP, I don't need to ask 100 people why it wont work, just FIX IT!!

When I go and open any website, a minute later Firefox flickers, it's been doing that for a month now. and I always get this too, a separate issue " This site is slowing down Firefox" yet it never says what site, and when Firefox is the only site open, it still does it.

Why am I getting this message?

Access Denied You don't have permission to access "http://www.stubhub.com/" on this server.

Reference #18.926bdc17.1659290068.83c76cd6

Windows 8.1, Firefox 102.0.1

I recently discovered that it is quite true that some folks (including the folks at Mozilla) store cookies in DOM storage.

For example, it is impossible to log into your Mozilla account (because you are not accepting cookies!) if you have set dom.storage.enabled = false using the about:config editor.

So, as you can see, those sneaky folks at Mozilla :) like to obscure "cookie" collecting by using DOM storage cookies instead of the usual cookies everyone complains about and have to be warned about by law. (I love the "I don't care about cookies" extension, by the way. It shuts up that completely asinine annoyance.)

As a test of sorts I would like toggle the blocking of DOM cookies on a regular basis by toggling dom.storage.enabled. Rather than going back and forth and toggling the value manually using the about:config editor I would like to automate the process, possibly with a Windows batch file or a script. Also, possibly, (just for fun) I would like to take this concept of the automating the changing of certain preference values into building an extension. If I ever learn how to properly code one, that is.

So, my question is -- Where is the dom.storage.enabled value stored? (I examined the pref.js file but it is not there unless it has some other name.)

"Sorry, the video player failed to load.(Error Code: 101104)" - this error message happens on some sites but not others. I believe there are more than one type of streaming transmission but do not know how to determine which is failing. For example, the streaming daily report on Democracynow.org fails while the reports on http://www.bbc.com/news/video_and_audio/international does not. This has been a problem for weeks now. I view both of these sites every day but must now use Microsoft Edge (ugh) to view democracynow.org.

Is there any clear way to prevent Firefox from automatically downloading and installing updates? I had checked the setting to prevent it being done without my choosing to do so: "Check for updates but let you choose to install them" but Firefox did not comply. What can a user do if Firefox will not comply with its own settings?

In government it's called autocracy, elitism and the only ones who like it are the ones in charge. Is that what's going on with Firefox?

LM

On some Globo pages, the Reader View does not return the text content of a page. It does return content, but I don't know from where.

It does not happen on every page, and I can't figure out what the difference is between pages that work & pages that don't.

Example: https://gshow.globo.com/novelas/pantanal/noticia/pantanal-zefa-conquista-web-ao-discutir-com-guta-por-causa-de-tadeu-confira-reacoes.ghtml

I'm attaching snippets of what the web page shows and what the Reader View shows.

Somewhere around FF 86, the print preview was broken so one only gets a tiny, unreadable print preview. For a while, print.tab_modal.enabled = classic experience (false) worked. Sometime in the last few months, that was taken away and no longer works. How now do we get a print preview big enough to see and make our choices about things like scale?

I note that I run Windows 8.1 (up-to-date), Radeon HD graphics, 1280 x 1024 monitor.

Hello, I have intermittent problems of not receiving certain emails on my Commander.net.au server. For reasons unknown emails which contain documents such as newsletters or greeting cards do not arrive in my email account. I have checked with the sender and they have definitely been sent to the correct address but never arrive. Commander claim there is no firewall to prevent this from happening. Is there a Firefox firewall that is stopping these emails?? Many thanks, Steve

Since updating to Firefox 100.0.1 cannot print any web pages. Cannot print to a printer, or to FoxIt pdf printer. Printing in MS Edge works with no problems. I have cleared saved print settings - did not fix problem. Please advise. Thank you.

UAC notification pops up every time I try to open Firefox since last update on 5/5/22. I've deselected all options that run the program as an administrator, but it still shows up every time. I've checked that no admin is selected in both the shortcut I use and in the program itself. Any suggestions?