Zobrazenie otázok označených: Zobraziť všetky otázky
  • Vyriešené

How can I keep the side panel with the AI chat always loaded?

I started using Claude in the side panel instead of a dedicated tab, but there is something noise about it: every time I click to open the side panel the chat starts from… (ďalšie informácie)

I started using Claude in the side panel instead of a dedicated tab, but there is something noise about it: every time I click to open the side panel the chat starts from scratch. Getting a clean slate is nice, but it takes too much time loading. So I would like to not unload the content of the panel when I close it, just hide it, so when I click to open is already loaded. There is a way to do that?

Otázku položil(a) marcoshalano Pred 6 hodinami

Na otázku odpovedal(a) marcoshalano Pred 6 hodinami

  • Vyriešené

How to recover backup from TBird 145.0-1 in new 140.7.1?

My old Arch Linux system with Thunderbird 145.0-1-x86_64 died. My RasPi and my new Pop-OS Meerkat both get 140.7.1esr (aarch64), and say they can't import my backups. I c… (ďalšie informácie)

My old Arch Linux system with Thunderbird 145.0-1-x86_64 died. My RasPi and my new Pop-OS Meerkat both get 140.7.1esr (aarch64), and say they can't import my backups. I could see the RasPi ARM system getting a different Thunderbird, but the Meerkat is clearly an Intel processor. Why does it get the same version as the ARM based Pi? How can I recover my years of mail history? Both new installations say they are incompatible!

Otázku položil(a) LorenAmelang Pred 3 dňami

Na otázku odpovedal(a) david Pred 2 dňami

  • Uzamknuté

Firefox Sync code doesn't arrive

Firefox Sync code doesn't arrive; my email's support (Proton Mail) says you have «likely added you to their suppression (do-not-send) list automatically.». So I request y… (ďalšie informácie)

Firefox Sync code doesn't arrive; my email's support (Proton Mail) says you have «likely added you to their suppression (do-not-send) list automatically.».

So I request you remove the e-mail associated with my account, the one used in this post, from the do-not-send list.

Thank you.

Otázku položil(a) lqu9whxy Pred 2 dňami

Posledná odpoveď od Denys Pred 1 dňom

  • Vyriešené

I logged into Firefox, I lost all my bookmarks, passwords, and browsing history.

So I had logged into this Firefox account, but while I was, I forgot my password. I needed to enter the correct code from the email, but I lost the recovery key; I needed… (ďalšie informácie)

So I had logged into this Firefox account, but while I was, I forgot my password. I needed to enter the correct code from the email, but I lost the recovery key; I needed to enter in the 2FA code from my phone, then I could now change the password. When I logged in, boom, bookmarks gone. Passwords gone, and browsing history gone. I was waiting for it all to sync, but it had probably synced the deletion of everything possibly. I have no idea what happened, but I do not believe my account was compromised, because I did not get any emails about any new logins. If it is encrypted, how can I decrypt it so I can get my stuff back? Thanks.

Otázku položil(a) catalysterkim Pred 4 mesiacmi

Na otázku odpovedal(a) Paul Pred 4 mesiacmi

  • Vyriešené

Viewing details of a bug

When I go to see a firefox bug such as the following, https://www.mozilla.org/en-US/security/advisories/mfsa2026-10/ There appears to be more details in https://bugzilla.… (ďalšie informácie)

When I go to see a firefox bug such as the following, https://www.mozilla.org/en-US/security/advisories/mfsa2026-10/

There appears to be more details in https://bugzilla.mozilla.org/show_bug.cgi?id=2014390 located at the bottom. When I try to view the details it asks me to log in. I do not see any reason I should have to log in to view the issue as I only intend to view the bug. Why does it require a login ?

Otázku položil(a) natalkalyu Pred 2 týždňami

Na otázku odpovedal(a) Denys Pred 2 týždňami

  • Vyriešené

Unable to sign into Yahoo with Thunderbird or Firefox

I've recently set up Thunderbird on Linux Mint 22.2 and was unable to sign into Yahoo so I tried to sign in with Firefox instead and had the same errors :- Something … (ďalšie informácie)

I've recently set up Thunderbird on Linux Mint 22.2 and was unable to sign into Yahoo so I tried to sign in with Firefox instead and had the same errors :-

   Something went wrong
   We could not sign you in. Try again from a different device.

OR

   We couldn’t sign you in
   Change your browser settings to continue. Try the following:
   Turn off ad blockers
   Enable JavaScript

If you still can’t sign in, try a different device.

I can sign in with Chrome without any problems on the same workstation. Firefox version :- 147.0.4 (64-bit)

   Only Extension is Privacy Badger, but this is disabled for Yahoo.com

Thunderbird version :- 148.0 (64-bit)

   No extensions - as installed from Thunderbird download site

I'm not having any issues signing into any other websites / email accounts (Google, Hotmail).

I notice on the support website :- https://support.mozilla.org/en-US/kb/thunderbird-and-yahoo it says "Starting with version 148, Thunderbird is switching to a more secure authorization protocol PKCE for Yahoo" BUT this isn't offered in the list of Authentication methods, has PKCE been delayed? Currently using OAuth2 for Thunderbird

Otázku položil(a) tmgdwn Pred 1 týždňom

Na otázku odpovedal(a) tmgdwn Pred 3 dňami

  • Vyriešené

How to get rid of the hp-search bookmark ?

When opening a new window, I get this https://hp-search.com/?path=firefox/newtab&u=7548f4ddec01b2d6&subid=11119&channel=default … (ďalšie informácie)

Otázku položil(a) Holy Pred 6 dňami

Na otázku odpovedal(a) amoun Pred 6 dňami

  • Vyriešené

Can you use Thunderbird with a two-step verification email account?

I want to access an Outlook.com email. It has 2-step verification. It also says I may be missing a domain name before the email. Not sure what that is. DomainName/myemail… (ďalšie informácie)

I want to access an Outlook.com email. It has 2-step verification. It also says I may be missing a domain name before the email. Not sure what that is. DomainName/myemailname@outlook.com.

Otázku položil(a) littlerock1 Pred 5 dňami

Na otázku odpovedal(a) Matt Pred 4 dňami

  • Uzamknuté

my accounts have been hacked

I need help recovering my phones my settings my photos on my accounts and passwords have been changed on two devices by a person that was not supposed to be using any of … (ďalšie informácie)

I need help recovering my phones my settings my photos on my accounts and passwords have been changed on two devices by a person that was not supposed to be using any of my accounts including my Mozilla

Otázku položil(a) D Pred 6 dňami

Posledná odpoveď od Denys Pred 5 dňami

  • Vyriešené

how to stop address bar search "terrible idea "

bold text how to stop address bar search. its very wrong you have a fake search bar in the screen i want to search from a search bar not the address bar … (ďalšie informácie)

bold text how to stop address bar search. its very wrong you have a fake search bar in the screen i want to search from a search bar not the address bar

Otázku položil(a) Matthew Davis Pred 1 týždňom

Na otázku odpovedal(a) Denys Pred 6 dňami

  • Vyriešené

When ThunderMail and Pro will be available?

Hi Just checking when ThunderMail and Pro will be available? I'm in need of email services for my small business and just don't want to subscribe to Google. I love Thunde… (ďalšie informácie)

Hi

Just checking when ThunderMail and Pro will be available? I'm in need of email services for my small business and just don't want to subscribe to Google. I love Thunderbird, glad it survived so many transformations over decades and would like my subscription contribute to further development.

Can you, please provide me with at least estimated timeline?

Thank you S

Otázku položil(a) S. Sliackus Pred 2 týždňami

Na otázku odpovedal(a) Wayne Mery Pred 1 týždňom

  • Uzamknuté

Unable to sign into Yahoo (locked duplicate)

I've recently set up Thunderbird on Linux Mint 22.2 and was unable to sign into Yahoo so I tried to sign in with Firefox instead and had the same errors :- Something … (ďalšie informácie)

I've recently set up Thunderbird on Linux Mint 22.2 and was unable to sign into Yahoo so I tried to sign in with Firefox instead and had the same errors :-

   Something went wrong
   We could not sign you in. Try again from a different device.

OR

   We couldn’t sign you in
   Change your browser settings to continue. Try the following:
   Turn off ad blockers
   Enable JavaScript
   If you still can’t sign in, try a different device.

I can sign in with Chrome without any problems on the same workstation. Firefox version :- 147.0.4 (64-bit)

   Only Extension is Privacy Badger, but this is disabled for Yahoo.com

Thunderbird version :- 148.0 (64-bit)

   No extensions - as installed from Thunderbird download site

I'm not having any issues signing into any other websites / email accounts (Google, Hotmail).

I notice on the support website :- https://support.mozilla.org/en-US/kb/thunderbird-and-yahoo it says "Starting with version 148, Thunderbird is switching to a more secure authorization protocol PKCE for Yahoo" BUT this isn't offered in the list of Authentication methods, has PKCE been delayed? Currently using OAuth2 for Thunderbird

Otázku položil(a) tmgdwn Pred 1 týždňom

  • Vyriešené

Frequent crashing on Chromebook

Hi, At some point in the last couple of weeks, I've started running into very frequent crashes running Firefox in the Linux container on my Chromebook. It previously work… (ďalšie informácie)

Hi,

At some point in the last couple of weeks, I've started running into very frequent crashes running Firefox in the Linux container on my Chromebook. It previously worked well, but is now unusable. I'm now running Firefox version 147.0.3 on Chrome version 144.0.7559.167. This is after I did a clean reinstall of Firefox using flatpak, which didn't help. It seems like it often happens when my mouse hovers over a browser tab or icon (eg account, extensions, hamburger). Other quirky display behaviour, which mayor may not related, is that videos are often not working (eg Youtube, BBC), and various browser windows (eg when selecting Manage Bookmarks, or restarting in safe mode), open a small size-reduced window. Latest crash reports below -

bp-79d9b303-4402-455b-b49b-bbc1e0260209 bp-58276587-1315-4431-beba-4d9230260209 bp-0f499a5f-34e7-4a1d-8789-e8dc80260209 bp-a2ccec4c-087d-4e39-8af6-cbb740260209 bp-59770723-c637-4689-ae2f-a203f0260209

Thanks for any suggestions.

Otázku položil(a) John Netizen Pred 3 týždňami

Na otázku odpovedal(a) John Netizen Pred 3 týždňami

  • Vyriešené

cards view

please explain the explenation at https://support.mozilla.org/en-US/kb/appearance-panel-layout-message-list-card-view-tab#w_card-view What 2 rows / 3 rows? … (ďalšie informácie)

Otázku položil(a) johannes Pred 1 týždňom

Na otázku odpovedal(a) johannes Pred 1 týždňom

  • Vyriešené

How can I remove the pinned urls? Specifically the start.fedoraproject.org when I open the URL tab.

The start.fedoraproject.org keeps showing up on my url. I don't have it pinned anywhere so I'm not sure how I can remove it. … (ďalšie informácie)

The start.fedoraproject.org keeps showing up on my url. I don't have it pinned anywhere so I'm not sure how I can remove it.

Otázku položil(a) Dustin Pred 1 týždňom

Na otázku odpovedal(a) Dustin Pred 1 týždňom

  • Vyriešené

FF auto saves files I click on like PDFs

Mint 147.0.4 64 bit I click on a pdf, it opens in qpdfview. It also saves in wherever my default save folder is. I later have to go remove all these junk PDFs from Downlo… (ďalšie informácie)

Mint 147.0.4 64 bit I click on a pdf, it opens in qpdfview. It also saves in wherever my default save folder is. I later have to go remove all these junk PDFs from Downloads or wherever because I either didn't want them or saved them elsewhere.

Please stop "helping me". I do not want to be "helped". How can I stop this auto-save """feature"""?

I think this started back in 98.

from Mint: [code] System:

 Kernel: 6.17.0-14-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
 Desktop: Cinnamon v: 6.6.7 tk: GTK v: 3.24.41 wm: Muffin v: 6.6.3 vt: 7 dm: LightDM v: 1.30.0
   Distro: Linux Mint 22.3 Zena base: Ubuntu 24.04 noble

Machine:

 Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
 Mobo: ASUSTeK model: ROG STRIX Z790-E GAMING WIFI v: Rev 1.xx serial: <superuser required>
   part-nu: SKU uuid: <superuser required> UEFI: American Megatrends v: 3107 date: 11/28/2025

CPU:

 Info: 24-core (8-mt/16-st) model: 13th Gen Intel Core i9-13900K bits: 64 type: MST AMCP
   smt: enabled arch: Raptor Lake rev: 1 cache: L1: 2.1 MiB L2: 32 MiB L3: 36 MiB
 Speed (MHz): avg: 1439 high: 5500 min/max: 800/5500:5800:4300 cores: 1: 4602 2: 800 3: 800
   4: 800 5: 5500 6: 800 7: 5500 8: 4920 9: 2666 10: 800 11: 800 12: 800 13: 800 14: 800 15: 800
   16: 800 17: 2088 18: 800 19: 800 20: 799 21: 802 22: 798 23: 800 24: 800 25: 800 26: 800
   27: 798 28: 800 29: 800 30: 800 31: 800 32: 799 bogomips: 191692
 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx

Graphics:

 Device-1: NVIDIA GA104 [GeForce RTX 3060 Ti Lite Hash Rate] vendor: Gigabyte driver: nvidia
   v: 580.126.09 arch: Ampere pcie: speed: 16 GT/s lanes: 16 ports: active: none off: DP-1
   empty: DP-2,HDMI-A-1,HDMI-A-2 bus-ID: 01:00.0 chip-ID: 10de:2489 class-ID: 0300
 Device-2: Logitech Brio 100 driver: snd-usb-audio,uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
   lanes: 1 bus-ID: 1-5.1:11 chip-ID: 046d:094c class-ID: 0102 serial: <filter>
 Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: nvidia
   unloaded: fbdev,modesetting,nouveau,vesa gpu: nv_platform,nvidia,nvidia-nvswitch display-ID: :0
   screens: 1
 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
 Monitor-1: DP-1 mapped: DP-0 note: disabled model: Dell S3221QS serial: <filter> res: 1920x1080
   hz: 60 dpi: 70 size: 697x392mm (27.44x15.43") diag: 806mm (31.7") modes: max: 3840x2160
   min: 640x480
 API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2 drv: swrast gbm:
   drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia inactive: wayland,device-1
 API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 580.126.09 glx-v: 1.4
   direct-render: yes renderer: NVIDIA GeForce RTX 3060 Ti/PCIe/SSE2
 API: Vulkan v: 1.3.275 layers: 9 surfaces: xcb,xlib device: 0 type: discrete-gpu driver: N/A
   device-ID: 10de:2489 device: 1 type: cpu driver: N/A device-ID: 10005:0000

Audio:

 Device-1: Intel Raptor Lake High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
   bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
 Device-2: NVIDIA GA104 High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
   pcie: speed: 16 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:228b class-ID: 0403
 Device-3: ASUSTek USB Audio driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0
   speed: 480 Mb/s lanes: 1 bus-ID: 1-4:5 chip-ID: 0b05:1a52 class-ID: 0300
 Device-4: Logitech Brio 100 driver: snd-usb-audio,uvcvideo type: USB rev: 2.0 speed: 480 Mb/s
   lanes: 1 bus-ID: 1-5.1:11 chip-ID: 046d:094c class-ID: 0102 serial: <filter>
 Device-5: Arturia KeyLab Essential 61 driver: snd-usb-audio type: USB rev: 2.0 speed: 12 Mb/s
   lanes: 1 bus-ID: 1-8:10 chip-ID: 1c75:028a class-ID: 0103 serial: <filter>
 API: ALSA v: k6.17.0-14-generic status: kernel-api
 Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
   2: wireplumber status: active 3: pipewire-alsa type: plugin

Network:

 Device-1: Intel Wi-Fi 6E AX210/AX1675 2x2 [Typhoon Peak] driver: iwlwifi v: kernel pcie:
   speed: 5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:2725 class-ID: 0280
 IF: wlo1 state: down mac: <filter>
 Device-2: Intel Ethernet I226-V vendor: ASUSTeK driver: igc v: kernel pcie: speed: 5 GT/s
   lanes: 1 port: N/A bus-ID: 07:00.0 chip-ID: 8086:125c class-ID: 0200
 IF: eno2 state: up speed: 1000 Mbps duplex: full mac: <filter>

Bluetooth:

 Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
   bus-ID: 1-14:16 chip-ID: 8087:0032 class-ID: e001
 Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
   hardware: no software: yes address: <filter>

RAID:

 Hardware-1: Intel Volume Management Device NVMe RAID Controller Intel driver: vmd v: 0.6
   port: N/A bus-ID: 00:0e.0 chip-ID: 8086:a77f rev: class-ID: 0104

Drives:

 Local Storage: total: 2.73 TiB used: 576.74 GiB (20.6%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 980 PRO 1TB size: 931.51 GiB speed: 63.2 Gb/s
   lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 34.9 C scheme: GPT
 ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 990 PRO 1TB size: 931.51 GiB speed: 63.2 Gb/s
   lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7 temp: 32.9 C scheme: GPT
 ID-3: /dev/nvme2n1 vendor: Western Digital model: WD Blue SN570 1TB size: 931.51 GiB
   speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 234110WD temp: 30.9 C scheme: GPT

Partition:

 ID-1: / size: 96.36 GiB used: 35.1 GiB (36.4%) fs: ext4 dev: /dev/nvme0n1p6
 ID-2: /boot/efi size: 96 MiB used: 37 MiB (38.5%) fs: vfat dev: /dev/nvme0n1p1

Swap:

 ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile

USB:

 Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0 speed: 480 Mb/s lanes: 1
   chip-ID: 1d6b:0002 class-ID: 0900
 Hub-2: 1-1:2 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1 speed: 480 Mb/s lanes: 1
   power: 100mA chip-ID: 174c:2074 class-ID: 0900
 Device-1: 1-1.2:4 info: Trust 2.4G Speed Mouse type: keyboard,mouse driver: hid-generic,usbhid
   interfaces: 2 rev: 1.1 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 145f:01c1 class-ID: 0301
 Hub-3: 1-2:3 info: Realtek 4-Port USB 2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s lanes: 1
   chip-ID: 0bda:5420 class-ID: 0900
 Device-1: 1-2.1:6 info: Cyber Power System CP1500 AVR UPS type: HID driver: hid-generic,usbhid
   interfaces: 1 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: 50mA chip-ID: 0764:0501 class-ID: 0300
 Device-2: 1-2.3:7 info: HP HP LaserJet Pro 4001 type: printer driver: usbfs interfaces: 4
   rev: 2.0 speed: 480 Mb/s lanes: 1 power: 2mA chip-ID: 03f0:0274 class-ID: 0701 serial: <filter>
 Device-3: 1-2.4:8 info: HP HP ColorLaserJet M253-M254 type: printer driver: usbfs interfaces: 5
   rev: 2.0 speed: 480 Mb/s lanes: 1 power: 2mA chip-ID: 03f0:ac2a class-ID: 0701 serial: <filter>
 Device-4: 1-4:5 info: ASUSTek USB Audio type: audio,HID
   driver: hid-generic,snd-usb-audio,usbhid interfaces: 8 rev: 2.0 speed: 480 Mb/s lanes: 1
   power: 100mA chip-ID: 0b05:1a52 class-ID: 0300
 Hub-4: 1-5:9 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1 speed: 480 Mb/s lanes: 1
   power: 100mA chip-ID: 174c:2074 class-ID: 0900
 Device-1: 1-5.1:11 info: Logitech Brio 100 type: video,audio driver: snd-usb-audio,uvcvideo
   interfaces: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 046d:094c class-ID: 0102
   serial: <filter>
 Device-2: 1-5.2:13 info: Corsair K70 CORE RGB Mechanical Gaming Keyboard
   type: keyboard,HID,mouse driver: hid-generic,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s
   lanes: 1 power: 500mA chip-ID: 1b1c:1bff class-ID: 0301 serial: <filter>
 Hub-5: 1-5.3:15 info: VIA Labs USB2.0 Hub ports: 4 rev: 2.1 speed: 480 Mb/s lanes: 1
   chip-ID: 2109:2817 class-ID: 0900
 Device-1: 1-8:10 info: Arturia KeyLab Essential 61 type: audio driver: snd-usb-audio
   interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 1c75:028a class-ID: 0103
   serial: <filter>
 Hub-6: 1-10:12 info: Genesys Logic Hub ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA
   chip-ID: 05e3:0608 class-ID: 0900
 Device-1: 1-13:14 info: ASUSTek AURA LED Controller type: HID driver: hid-generic,usbhid
   interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 16mA chip-ID: 0b05:19af class-ID: 0300
   serial: <filter>
 Device-2: 1-14:16 info: Intel AX210 Bluetooth type: bluetooth driver: btusb interfaces: 2
   rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0032 class-ID: e001
 Hub-7: 2-0:1 info: super-speed hub ports: 8 rev: 3.1 speed: 20 Gb/s lanes: 2 chip-ID: 1d6b:0003
   class-ID: 0900
 Hub-8: 2-1:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0 speed: 5 Gb/s lanes: 1
   power: 8mA chip-ID: 174c:3074 class-ID: 0900
 Hub-9: 2-2:3 info: Realtek 4-Port USB 3.0 Hub ports: 4 rev: 3.2 speed: 10 Gb/s lanes: 1
   chip-ID: 0bda:0420 class-ID: 0900
 Hub-10: 2-4:4 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0 speed: 5 Gb/s lanes: 1
   power: 8mA chip-ID: 174c:3074 class-ID: 0900
 Hub-11: 2-4.3:5 info: VIA Labs USB3.0 Hub ports: 4 rev: 3.2 speed: 5 Gb/s lanes: 1
   chip-ID: 2109:0817 class-ID: 0900

Sensors:

 System Temperatures: cpu: 37.0 C mobo: N/A gpu: nvidia temp: 35 C
 Fan Speeds (rpm): N/A gpu: nvidia fan: 0%

Repos:

 Packages: pm: dpkg pkgs: 2491
 No active apt repos in: /etc/apt/sources.list
 Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
   1: deb http: //packages.linuxmint.com zena main upstream import backport
   2: deb http: //archive.ubuntu.com/ubuntu noble main restricted universe multiverse
   3: deb http: //archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
   4: deb http: //archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse
   5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse

Info:

 Memory: total: 32 GiB note: est. available: 31.03 GiB used: 4.52 GiB (14.6%)
 Processes: 534 Power: uptime: 1h 14m states: freeze,mem,disk suspend: deep wakeups: 0
   hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
 Compilers: gcc: 13.3.0 Client: Unknown python3.12 client inxi: 3.3.34

/code

Otázku položil(a) krislema2 Pred 2 týždňami

Na otázku odpovedal(a) Agent virtuel Pred 1 týždňom