Thunderbird: форум сообщества

Over the last week I have been experiencing issues that prevent me from using Thunderbird on my computer. It had been working for a few weeks prior, with emails sending without issue. Without any apparent cause, and with the correct credentials set in my account settings, emails are no longer sending. They continue to be received with no issue, and I can move emails into folders etc.., which I immediately see reflected in Webmail. I get the attached error, every time I try to send an email, no matter which address I am trying to contact. I can log in to my account with the same credentials on different software on the same computer, and I have no issues with sending emails from that software, so I can't see how this would be an issue with my computer. I have tried removing the account, and adding it again. The credentials are accepted, but the issue persists. The email also works without any issues via Webmail. I have contacted the hosting company for support, but they have confirmed that this is an issue with Thunderbird. Please can somebody help?

After installing thunderbird, It takes me hours to figure out that my fonts are too small because of one value in Settings > General > Language & Fonts > Fonts > Advanced > Fonts for Other writing systems gives a too small number.

It seems insane and I don't think users can easily get there. Maybe some users want to set different fonts for different languages and the "Fonts for ..." is for them. However, for most users who just want to change their font size, I don't think it's a good experience to going so deep and find an option in the loooong "Fonts for ..." list.

So please give users a simple option where I can just set my font size without such pain.

I know there's a font size option in TB menu but it doesn't work as expected. In my case, the font size shown in TB menu is 16 while the font size of my plain text emails is 12. And 1. email font sizes will change to TB menu size as long as TB menu font size is not 16. For example, when changing TB menu font size 15 -> 16 -> 17, email text just suddenly goes from 15 to as small as 12, and then from 12 to 17. 2. email font size seems changing with the TB menu font size. However, email text font size will go back to what it was when open another email.

Hi, my Thunderbird calendar reminders are coming up 4 hours after the meeting.

Running Kubuntu. System locale/timezone OK, TBird set to use system time (though manually making it the same didn't help). HW Clock matches system time. Pacific/Auckland.

Tried exporting all my appointments and re-importing them - no change.

Ubuntu 24.04.3 LTS new installation. Thunderbird 140.3.1esr (64-bit) Adding an existing account Type in My name and email address and click Continue It says it is looking up configuration and it is just looping around and does not report an error. I have waited over an hour with no result. The only way to recover is to go to the taskbar and right click Quit. It would be helpful if there were away to know what is blocking the search for the configuration.

I updated Thunderbird on August 4,5, & 6. Since then I cannot send (or reply to) any email. I do receive my email. The failure is 'FAILED TO LOGIN SERVER'.

Here are the particulars to my system: john@cm26:~> sudo zypper if MozillaThunderbird Loading repository data... Reading installed packages...

Information for package MozillaThunderbird:

Repository  : Update repository with updates from SUSE Linux Enterprise 15 Name  : MozillaThunderbird Version  : 140.1.0-150200.8.230.1 Arch  : x86_64 Vendor  : SUSE LLC <https://www.suse.com/> Installed Size : 284.8 MiB Installed  : Yes Status  : up-to-date Source package : MozillaThunderbird-140.1.0-150200.8.230.1.src Upstream URL  : https://www.thunderbird.net/ Summary  : An integrated email, news feeds, chat, and newsgroups client Description  :

   Thunderbird is a free, open-source, cross-platform application for
   managing email, news feeds, chat, and news groups. It is a local
   (rather than browser- or web-based) email application that is powerful
   yet easy to use.

   KDE

Information for pattern kde:

Repository  : Main Repository Name  : kde Version  : 20231206-lp156.2.2 Arch  : noarch Vendor  : openSUSE Installed  : Yes Visible to User : Yes Summary  : KDE Applications and Plasma 5 Desktop Description  :

   Packages providing the Plasma desktop environment and applications from KDE.

Contents  :

   S  | Name                        | Type    | Dependency
   ---+-----------------------------+---------+------------
   i+ | patterns-kde-kde            | package | Required
   i  | patterns-kde-kde_plasma     | package | Required
   i  | MozillaFirefox              | package | Recommended
   i  | ark                         | package | Recommended
   i  | avahi                       | package | Recommended
   i  | discover                    | package | Recommended
   i  | dolphin                     | package | Recommended
   i  | gwenview5                   | package | Recommended
   i  | kate                        | package | Recommended
   i  | kcalc                       | package | Recommended
   i  | kipi-plugins                | package | Recommended
   i  | konsole                     | package | Recommended
   i  | okular                      | package | Recommended
   i  | patterns-desktop-multimedia | package | Recommended
   i  | patterns-games-games        | package | Recommended
   i  | patterns-kde-kde_internet   | package | Recommended
      | patterns-kde-kde_pim        | package | Recommended
   i  | patterns-kde-kde_utilities  | package | Recommended
   i  | patterns-kde-kde_yast       | package | Recommended
   i  | patterns-office-office      | package | Recommended
   i  | skanlite                    | package | Recommended
   i  | spectacle                   | package | Recommended
   i  | yast2-control-center-qt     | package | Recommended

   SUSE

   Information for product Leap:

Repository  : Main Repository Name  : Leap Version  : 15.6-1 Arch  : x86_64 Vendor  : openSUSE End of Support  : 2025-12-30 Flavor  : dvd Is Base  : Yes Installed  : Yes Status  : up-to-date Update Repositories : --- CPE Name  : cpe:2.3:o:opensuse:leap:15.6:*:*:*:*:*:*:* Short Name  : openSUSE Leap Summary  : openSUSE Leap 15.6 Description  :

   openSUSE Leap 15.6.

   KERNEL

john@cm26:~> uname -a Linux cm26 6.4.0-150600.23.60-default #1 SMP PREEMPT_DYNAMIC Tue Jul 1 14:43:49 UTC 2025 (6f98261) x86_64 x86_64 x86_64 GNU/Linux ___________________________________________________________________________________________-

Update particulars since the 8/4/2025

|root@cm26|'zypper' 'up'| 2025-08-04 14:55:01|install|libomp-devel|20-639.1|x86_64||devel_tools_compiler|1e51a50e5fce9250ba8f0022954c5ace3023e4e96f036caa5d9a332fb576648383f420fea778fef6c44a3973465c1e412b9d76369a2b5cf9bf09e803c2d27b55| 2025-08-04 14:55:02|install|llvm|20-639.1|x86_64||devel_tools_compiler|227efb182acf8ca11178437c1aa5392df7b533f6e5d66af6f04282cfb70b73e1365b8508084553ba5c6a6dd2c17e2d0991468c8b1cdb37ae92e40167b908e182| 2025-08-04 14:55:02|install|llvm-gold|20-639.1|x86_64||devel_tools_compiler|8ed08f0a486cce4a71fc01b5b619ca740820d86e4a65ecce3978e8fe4e3bd7d1bf3f2276a477ab72285b84073d1eb1af25786859eb3bc4d4867ba87c5d6769f3| 2025-08-04 14:55:02|install|llvm-polly|20-639.1|x86_64||devel_tools_compiler|eda6140297ac129aca87e3e46ee515145512a3d2cdc0c9b9eb60422c126ea6e6b8802b2921a4c1b0b321f90432e56d1a2cac924a199c49f3dcb4a9bd13bade9a| 2025-08-04 14:55:02|install|llvm-vim-plugins|20-639.1|noarch||devel_tools_compiler|5432e221a402b8944b39dd9e7c5da372021ada65a635cc85b7f3a0e908bbdc668a1f4c8f4282169852d08284b05e126e7825f5ed007953485d5dd38acccca0d8| 2025-08-04 14:55:02|install|llvm-polly-devel|20-639.1|x86_64||devel_tools_compiler|32680f5a310dcedc04d863fa5b6aadbdd2a6e4649900e5cee5e24ff6d8916f5fd491508ab3a5bc6fbef6b1fbb977a624a6a1e7633761c309dadef48dc8bc24f9| 2025-08-04 14:55:02|install|llvm-devel|20-639.1|x86_64||devel_tools_compiler|e5308addf7fc2f6629d8673d8f7c51a2d64f8b350dcec20908fc0b54f63e7bf73dd547673d2e3cb266d7293b667fa6914ecf4bbedcf24a9f05f793fc95aeb2c7| 2025-08-04 14:55:02|install|kmozillahelper|5.0.6-bp156.2.3.1|x86_64||repo-backports-update|f700a7da448bb28b8041237c0da511ef7c185c300d424e0a9b0d5fe907c9e6aa| 2025-08-04 14:55:05|install|MozillaThunderbird|140.1.0-150200.8.230.1|x86_64||repo-sle-update|d05f87c18c5a52444c03c07950267b80ab25d85155c82ed12e2e786ccf96b6ef| 2025-08-04 14:55:06|install|alsa-ucm-conf|1.2.10-150600.3.8.1|noarch||repo-sle-update|bebdf49214321c88f819fa2c760c323ec2c392d9dd966fae4641588dbec0dad8| 2025-08-04 14:55:06|install|apache2-manual|2.4.58-150600.5.35.1|noarch||repo-sle-update|1c378be636ced16b707429601950dfb43760af86c05546b9eb1b243796111df8|

1. 2025-08-04 14:55:07 apache2-prefork-2.4.58-150600.5.35.1.x86_64.rpm installed ok
2. Additional rpm output:
3. Requesting apache restart (all instances)

2025-08-04 14:55:07|install|apache2-prefork|2.4.58-150600.5.35.1|x86_64||repo-sle-update|43cb40e3c600306fb44274cd06640cf14ad1a22658a72536d9179e151401b2a3| 2025-08-04 14:55:07|install|apache2-utils|2.4.58-150600.5.35.1|x86_64||repo-sle-update|c9dde3af023734baa89bd680e7d00b48ee989798fed26d8509f00edbd3b7faf6| 2025-08-04 14:55:09|install|java-11-openjdk-headless|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|0d7d34a705a5b09e5919d731e50be2105b4c4fcada01f644da1fd5d56427d750| 2025-08-04 14:55:09|install|libsqlite3-0|3.50.2-150000.3.33.1|x86_64||repo-sle-update|42fd21bd429a1e4f41b52bc5712ba1f2c6ed9bb67a50992672ee98f3ea53dbbc| 2025-08-04 14:55:09|install|sqlite3|3.50.2-150000.3.33.1|x86_64||repo-sle-update|7e035b2698455e315dd138fbb424b7d6d1dfd63fe81edfb59f7e04158d2d0d15| 2025-08-04 14:55:09|install|sqlite3-tcl|3.50.2-150000.3.33.1|x86_64||repo-sle-update|20cb9d09ad5fc46faf921f7ff806d228c6a04804d8dd89a6f5ea42c7a5bd4577| 2025-08-04 14:55:10|install|yast2-packager|4.6.10-150600.3.3.1|x86_64||repo-sle-update|cf13dc5dbbb9d34da4500390565b42bf8ff88a83a1bf514d4b68cfe85e7a08e6| 2025-08-04 14:55:10|install|MozillaThunderbird-translations-common|140.1.0-150200.8.230.1|x86_64||repo-sle-update|a06da251ea93e1a75acf8ac5a962d802d19598225155b4b87fa119cc0efb2a42|

1. 2025-08-04 14:55:11 apache2-2.4.58-150600.5.35.1.x86_64.rpm installed ok
2. Additional rpm output:
3. Please check /etc/permissions.local for settings of /usr/sbin/suexec .
4. Updating /etc/sysconfig/apache2 ...
5. Requesting apache restart (all instances)

2025-08-04 14:55:11|install|apache2|2.4.58-150600.5.35.1|x86_64||repo-sle-update|1664d3cd611e6090798be19495359c12976bf574f5310c989e2ea62dfae32e50| 2025-08-04 14:55:11|install|java-11-openjdk|11.0.28.0-150000.3.129.2|x86_64||repo-sle-update|39be984b1799bdbc90d89710495e33e8081f02c192af819ad656c97f5b1f6eda| 2025-08-04 14:55:11|install|sqlite3-devel|3.50.2-150000.3.33.1|x86_64||repo-sle-update|46b1f19824e4202ab681981af1bbd03d0b619d2970505b095d591cc86322e89b| 2025-08-04 14:55:12|install|apache2-devel|2.4.58-150600.5.35.1|x86_64||repo-sle-update|7274bac7d40919fe65bc717b3ad8b9b8628da8bc041bbc054b6d3e14e76d73e1|

1. 2025-08-04 14:55:13 %posttrans(apache2-prefork-2.4.58-150600.5.35.1.x86_64) script output:
2. Restarting apache (all instances)

2025-08-04 14:55:14|patch |openSUSE-2025-283|1|noarch|repo-backports-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2672|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2613|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2666|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2684|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2660|1|noarch|repo-sle-update|important|recommended|needed|applied| 2025-08-04 14:55:14|patch |openSUSE-SLE-15.6-2025-2546|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-04 15:57:23|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-05 13:54:51|install|libdjvulibre21|3.5.27-150200.11.17.1|x86_64||repo-sle-update|1c23e1246aa51371a039161a94023c894c525eae8ef7ad9e1b3ca6cb3fad682b| 2025-08-05 13:54:51|install|python-doc|2.7.18-150000.83.1|noarch||repo-sle-update|edf4affcbc576d8c57a8a47a988978bda82448ea9b079bdea416d7d101be02b7| 2025-08-05 13:54:52|install|python-doc-pdf|2.7.18-150000.83.1|noarch||repo-sle-update|0bd6b6669e56baf74c146abc8cf67f151043c8d3f0acfb29e6be01c1f1878902| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2703|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-05 13:54:52|patch |openSUSE-SLE-15.6-2025-2701|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-06 14:26:15|command|root@cm26|'zypper' 'up'| 2025-08-06 14:26:16|install|libopenh264-8|2.6.0-2.sle150600.1|x86_64||repo-openh264|e69db207f4cc68a328f301d172deba5b01a705ffa355c55445dd1c787e274940| 2025-08-06 14:26:16|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64||repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-06 14:26:16|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64||repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-06 14:26:16|install|hwinfo|21.89-150500.3.12.1|x86_64||repo-sle-update|c317cb92b23549f431aec4eed80d404afb3696fd383e59762bfd438a39d7affb| 2025-08-06 14:26:16|install|libpython3_11-1_0|3.11.13-150600.3.35.1|x86_64||repo-sle-update|7cce50d079b3ca4e2400262f04f5f40e7dd2ad0aaf5f8d280e12ef48da4141fe| 2025-08-06 14:26:17|install|python311-base|3.11.13-150600.3.35.1|x86_64||repo-sle-update|9625750fe68ffedf508a9ad7017810eb3b80bcd56bf66524a4c636e84b8829a4| 2025-08-06 14:26:17|install|python311|3.11.13-150600.3.35.2|x86_64||repo-sle-update|f21b3ac71288810276c632a2812741315876a88ebc70db8725676235831556c0| 2025-08-06 14:26:17|install|python311-curses|3.11.13-150600.3.35.2|x86_64||repo-sle-update|7e7f4980631592315cae3eff001dc6aefccd2d00882d5b321c5f7363293b7f84| 2025-08-06 14:26:17|install|libsystemd0|254.27-150600.4.43.3|x86_64||repo-sle-update|c95566b16ebc099cb1cd3e176542c52205b06f132cfb699a2621cdcf69e49b16| 2025-08-06 14:26:17|install|libudev1|254.27-150600.4.43.3|x86_64||repo-sle-update|fb64712ccaa6f9d6c3bd48f0feaefbd4884affc32266a94bb43ff630d37a904a|

1. 2025-08-06 14:26:24 systemd-254.27-150600.4.43.3.x86_64.rpm installed ok
2. Additional rpm output:
3. /usr/lib/tmpfiles.d/inn.conf:1: Line references path below legacy directory /var/run/, updating /var/run/news → /run/news; please update the tmpfiles.d/ drop-in file accordingly.
4. /usr/lib/tmpfiles.d/nagios.conf:2: Line references path below legacy directory /var/run/, updating /var/run/nagios → /run/nagios; please update the tmpfiles.d/ drop-in file accordingly.

2025-08-06 14:26:24|install|systemd|254.27-150600.4.43.3|x86_64||repo-sle-update|8e1eb79e60344a723be2af579de0bae7b8d1c5a9b6d83909da9e6644b7f249b4| 2025-08-06 14:26:25|install|systemd-container|254.27-150600.4.43.3|x86_64||repo-sle-update|6c578090d9dc1351af0500fae60dbbe1286b7396932b6edc199a40e154f87a10| 2025-08-06 14:26:25|install|systemd-doc|254.27-150600.4.43.3|x86_64||repo-sle-update|c250b09c2fc6d4f61169faab2ff4c8cbd48985e5687f6351d257d76d59f29c83| 2025-08-06 14:26:25|install|python311-dbm|3.11.13-150600.3.35.2|x86_64||repo-sle-update|36cb2e01bb69b9c965737eb35c17d2abeee237fe83bd472be4ad2d48566065e5| 2025-08-06 14:26:29|install|udev|254.27-150600.4.43.3|x86_64||repo-sle-update|ca4c5c22e5d348b33988a28525a944d5c8ef6148c248aaca9e2d4f07611e0f6b| 2025-08-06 14:26:29|install|systemd-lang|254.27-150600.4.43.3|noarch||repo-sle-update|e12fb357b0cc0852ddbf4e6cbfc3fd2a65a3224241c40c7e2d670755966ba2eb| 2025-08-06 14:26:29|install|hwinfo-devel|21.89-150500.3.12.1|x86_64||repo-sle-update|deb9d6a6d42fc290b43c208db3fb6b4d059a745c33b8ed9a682204d2f111c9bd|

1. 2025-08-06 14:26:29 %posttrans(udev-254.27-150600.4.43.3.x86_64) script output:
2. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.53-default -f
3. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
4. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
5. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
6. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
7. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
8. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
9. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
10. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
11. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
12. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
13. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
14. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
15. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
16. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
17. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
18. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
19. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
20. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
21. dracut[I]: memstrack is not available
22. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
23. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
24. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
25. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
26. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
27. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
28. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
29. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
30. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
31. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
32. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
33. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
34. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
35. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
36. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
37. dracut[I]: memstrack is not available
38. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
39. dracut[I]: *** Including module: systemd ***
40. dracut[I]: *** Including module: systemd-initrd ***
41. dracut[I]: *** Including module: i18n ***
42. dracut[I]: *** Including module: drm ***
43. dracut[I]: *** Including module: plymouth ***
44. dracut[I]: *** Including module: btrfs ***
45. dracut[I]: *** Including module: kernel-modules ***
46. dracut[I]: *** Including module: kernel-modules-extra ***
47. dracut[I]: *** Including module: resume ***
48. dracut[I]: *** Including module: rootfs-block ***
49. dracut[I]: *** Including module: suse-btrfs ***
50. dracut[I]: *** Including module: suse-xfs ***
51. dracut[I]: *** Including module: terminfo ***
52. dracut[I]: *** Including module: udev-rules ***
53. dracut[I]: *** Including module: dracut-systemd ***
54. dracut[I]: *** Including module: haveged ***
55. dracut[I]: *** Including module: ostree ***
56. dracut[I]: *** Including module: usrmount ***
57. dracut[I]: *** Including module: base ***
58. dracut[I]: *** Including module: fs-lib ***
59. dracut[I]: *** Including module: shutdown ***
60. dracut[I]: *** Including module: suse ***
61. dracut[I]: *** Including module: suse-initrd ***
62. dracut[I]: *** Including modules done ***
63. dracut[I]: *** Installing kernel module dependencies ***
64. dracut[I]: *** Installing kernel module dependencies done ***
65. dracut[I]: *** Resolving executable dependencies ***
66. dracut[I]: *** Resolving executable dependencies done ***
67. dracut[I]: *** Hardlinking files ***
68. dracut[I]: *** Hardlinking files done ***
69. dracut[I]: *** Generating early-microcode cpio image ***
70. dracut[I]: *** Constructing AuthenticAMD.bin ***
71. dracut[I]: *** Store current command line parameters ***
72. dracut[I]: Stored kernel commandline:
73. dracut[I]: rd.driver.pre=btrfs
74. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
75. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
76. dracut[I]: *** Stripping files ***
77. dracut[I]: *** Stripping files done ***
78. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.53-default' ***
79. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.53-default' done ***
80. dracut[I]: Executing: /usr/bin/dracut --kver=6.4.0-150600.23.60-default -f
81. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
82. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
83. dracut[I]: Module 'systemd-networkd' will not be installed, because command 'networkctl' could not be found!
84. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd' could not be found!
85. dracut[I]: Module 'systemd-networkd' will not be installed, because command '/usr/lib/systemd/systemd-networkd-wait-online' could not be found!
86. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
87. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
88. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
89. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
90. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
91. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
92. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
93. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
94. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
95. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
96. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
97. dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
98. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
99. dracut[I]: memstrack is not available
100. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
101. dracut[I]: Module 'systemd-coredump' will not be installed, because command 'coredumpctl' could not be found!
102. dracut[I]: Module 'systemd-coredump' will not be installed, because command '/usr/lib/systemd/systemd-coredump' could not be found!
103. dracut[I]: Module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
104. dracut[I]: Module 'systemd-portabled' will not be installed, because command 'portablectl' could not be found!
105. dracut[I]: Module 'systemd-portabled' will not be installed, because command '/usr/lib/systemd/systemd-portabled' could not be found!
106. dracut[I]: Module 'systemd-resolved' will not be installed, because command 'resolvectl' could not be found!
107. dracut[I]: Module 'systemd-resolved' will not be installed, because command '/usr/lib/systemd/systemd-resolved' could not be found!
108. dracut[I]: Module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
109. dracut[I]: Module 'rngd' will not be installed, because command 'rngd' could not be found!
110. dracut[I]: Module 'connman' will not be installed, because command 'connmand' could not be found!
111. dracut[I]: Module 'connman' will not be installed, because command 'connmanctl' could not be found!
112. dracut[I]: Module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
113. dracut[I]: Module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
114. dracut[I]: Module 'memstrack' will not be installed, because command 'memstrack' could not be found!
115. dracut[I]: memstrack is not available
116. dracut[I]: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
117. dracut[I]: *** Including module: systemd ***
118. dracut[I]: *** Including module: systemd-initrd ***
119. dracut[I]: *** Including module: i18n ***
120. dracut[I]: *** Including module: drm ***
121. dracut[I]: *** Including module: plymouth ***
122. dracut[I]: *** Including module: btrfs ***
123. dracut[I]: *** Including module: kernel-modules ***
124. dracut[I]: *** Including module: kernel-modules-extra ***
125. dracut[I]: *** Including module: resume ***
126. dracut[I]: *** Including module: rootfs-block ***
127. dracut[I]: *** Including module: suse-btrfs ***
128. dracut[I]: *** Including module: suse-xfs ***
129. dracut[I]: *** Including module: terminfo ***
130. dracut[I]: *** Including module: udev-rules ***
131. dracut[I]: *** Including module: dracut-systemd ***
132. dracut[I]: *** Including module: haveged ***
133. dracut[I]: *** Including module: ostree ***
134. dracut[I]: *** Including module: usrmount ***
135. dracut[I]: *** Including module: base ***
136. dracut[I]: *** Including module: fs-lib ***
137. dracut[I]: *** Including module: shutdown ***
138. dracut[I]: *** Including module: suse ***
139. dracut[I]: *** Including module: suse-initrd ***
140. dracut[I]: *** Including modules done ***
141. dracut[I]: *** Installing kernel module dependencies ***
142. dracut[I]: *** Installing kernel module dependencies done ***
143. dracut[I]: *** Resolving executable dependencies ***
144. dracut[I]: *** Resolving executable dependencies done ***
145. dracut[I]: *** Hardlinking files ***
146. dracut[I]: *** Hardlinking files done ***
147. dracut[I]: *** Generating early-microcode cpio image ***
148. dracut[I]: *** Constructing AuthenticAMD.bin ***
149. dracut[I]: *** Store current command line parameters ***
150. dracut[I]: Stored kernel commandline:
151. dracut[I]: rd.driver.pre=btrfs
152. dracut[I]: resume=UUID=8056750a-b96a-48a5-9e6a-73481b06b3d5
153. dracut[I]: root=UUID=6fb45479-4950-4fe4-9fdf-817db2a32a6d rootfstype=btrfs rootflags=rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@,subvol=@
154. dracut[I]: *** Stripping files ***
155. dracut[I]: *** Stripping files done ***
156. dracut[I]: *** Creating image file '/boot/initrd-6.4.0-150600.23.60-default' ***
157. dracut[I]: *** Creating initramfs image file '/boot/initrd-6.4.0-150600.23.60-default' done ***

2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2717|1|noarch|repo-sle-update|important|security|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2713|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-06 14:26:56|patch |openSUSE-SLE-15.6-2025-2714|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 07:44:41|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:44:41|install|mozilla-openh264|2.6.0-2.sle150600.1|x86_64|root@cm26|repo-openh264|b4a4bc2baae3e7f4939bab923046bf0eaa1eed58dbff5f2aa11c1a933f3d76c6| 2025-08-07 07:44:41|install|gstreamer-plugin-openh264|1.24.12-1.sle150600.2|x86_64|root@cm26|repo-openh264|5d57d69ed0f2d256d3a0c9cafd5b89280d945b7802e129bbc8670b97475e3ef0| 2025-08-07 07:45:43|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-07 07:45:43|install|crypto-policies|20230920.570ea89-150600.3.12.1|noarch||repo-sle-update|4fa356ff142adf90186ea4770b7543bbe5769650d4da8dac5968fd73f97de8ba| 2025-08-07 07:45:43|patch |openSUSE-SLE-15.6-2025-2720|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-07 15:49:29|command|root@cm26|'/usr/bin/ruby.ruby2.5' '--encoding=utf-8' '/usr/lib/YaST2/bin/y2start' 'sw_single' 'qt' '-name' 'YaST2' '-icon' 'yast'| 2025-08-07 15:49:30|install|xsane|0.999-bp156.5.8|x86_64|root@cm26|repo-oss|3e87758c12fab61daf9fb6b47702c5040181c77c43b6fcdd804ee2ca791a9e8f38731de5a724aa9f70e1212aa4f950b600bcb3afe48f583439e12f0ddda046ea| 2025-08-08 15:10:39|command|root@cm26|'/usr/lib/packagekitd'| 2025-08-08 15:10:39|install|perl-DBI|1.647.0-150600.12.6.1|x86_64||repo-sle-update|8dc0d1d560b06263d1fab86650bf4e76dc3fdd66bc537a6ca25f70059400f62b| 2025-08-08 15:10:39|install|python311-urllib3|2.0.7-150400.7.21.1|noarch||repo-sle-update|d45bcc3575f40b1a33bf4e2680dc86bcdc0ac7d9f68ccf1bfd192ed25e96d3c6| 2025-08-08 15:10:39|install|update-alternatives|1.19.0.4-150000.4.7.1|x86_64||repo-sle-update|2fa94871cf88a03490bf47e28dbe99f67b306e7ee71eadfa3d101fff5fd5b6bd| 2025-08-08 15:10:39|install|libruby2_5-2_5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|86da48a46d85fbfee262cafe7c5583391d88ba794f0f4acd6b408d1fe8272b9b| 2025-08-08 15:10:40|install|ruby2.5-stdlib|2.5.9-150000.4.46.1|x86_64||repo-sle-update|f3ad5fb18d5feffed499d8cf013ae4faa5780c19000ed58d197f0a06cafb24b8| 2025-08-08 15:10:40|install|ruby2.5|2.5.9-150000.4.46.1|x86_64||repo-sle-update|5265dc9545031c6587772189a0d82ff43766835360ebf46f1a2f7d94318d5814| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2731|1|noarch|repo-sle-update|moderate|recommended|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2735|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2739|1|noarch|repo-sle-update|moderate|security|needed|applied| 2025-08-08 15:10:40|patch |openSUSE-SLE-15.6-2025-2734|1|noarch|repo-sle-update|moderate|security|needed|applied|

I found a solution for windows :

From the Menu Bar select Tools-Options-Display-Advanced

On thunderbird installed on Linux this menu is not present.

After upgrading to Thunderbird 60.2.1, I can no longer send messages. I'm running Linux 4.15.0-38-generic.

I get the attached error saying that I have problems with STARTTLS SMP. However, I have my connection security as SSL/TLS (second attachment). I haven't changed anything for years on my connection security. I successfully sent emails yesterday. Sending still works on my other machine (Windows) with v 59 and the same settings..

Hello,

After upgrading my Thunderbird install to version 60.2.1 on my Xubuntu 18.04 machine, I cannot access my mail anymore, because there seems to be a problem with passwords.

Symptoms:

- When starting Thunderbird, I get an "Enter your password" box for each of my accounts even though I had my passwords saved.

- When I go to Preferences -> Security -> Passwords -> Saved Passwords, the list is empty.

- When I try to enter a password and save it, it does not actually get saved and Thunderbird will ask again soon after.

- The following line is logged to console a whole bunch of times:

JavaScript error: jar:file:///usr/lib/thunderbird/omni.ja!/components/crypto-SDR.js, line 179: NS_ERROR_FAILURE: Couldn't decrypt string

Other findings:

- Downgrading Thunderbird to 52.7.0 fixes the problem. The old saved passwords just reappear again and Thunderbird has no problem logging in.

- Starting Thunderbird 60.2.1 on a Windows 10 box with exactly the same profile folder works fine. It can read the passwords and access my mail accounts.

Can you please tell me what to do to fix this, so I don't need to keep using an old version of Thunderbird just to access my mail?

Thanks,

tried to follow the instructions but the config option to reset in the config manager doesn't exist

https://i.imgur.com/G6H5CT0.png

I am trying to setup Thudnerbird to retrieve my Outlook365 emails from the University.

The software has been able to validate the servers, IMAP and SMTP, however when testing I receive an error message saying the the "Username or Password is invalid".

I don't know how much this relates but I am afraid the Micorosoft accounts through school use some kind of double authentication or similar.

Any help will be greatly appreciate it.

Hi,

Someone sends me a calendar appointment for 11th of May at 16:30-18:30 and another at 18:30:20:30. I accept these appointments. In my calendar, they correctly display at these times.

When I close and re-open Thunderbird, the first appointment is now scheduled for 12th of May, but the second is fine. When I close and re-open Thunderbird again, the second appointment is now scheduled for 12th of May as well.

The times are completely different too.

I'm using Thunderbird 138 from the Arch Linux repositories but I've also tried the Flatpak package to no avail. I've tried setting my Timezone manually and using my System timezone to no avail.

GNOME Calendar, which is also synced to my Caldav server, displays the appointments at the correct day and time. The web interface for my mail server also displays correctly.

It's only Thunderbird that screws it up time and time again.

This has been going on for years and it is driving me insane. I can't use my calendar with Thunderbird because I keep thinking my appointments are at the wrong time!

Send help.

Hi @ all,

When using TB as a LDAP-User, logins.json and key4.db are NOT created on the (mounted) home directory.

here's my setup: Debian 12 with a local user as well as remote users, administrated via LDAP. PAM-login for local and ldap users has been setup and is working. Automounting of network drives is working. Each LDAP user has their home directory stored on a Fileserver and mounted upon login. All applications are working as intended except thunderbird.

So far I've tried to run gnupg locally instead of having it start a session from the (mounted) home directory, assuming that gnupg is the corresponding means of de/encryption. I've copied the profile of the local user to be used as the profile of the LDAP user, logins.json is completely ignored by TB.

Upon starting of TB, passwords are asked for and are remembered in the session. But passwords/logins are not stored and available for the next session.

Any ideas?

I reinstalled thunderbird and cleared the profile folder. Then when I login Gmail, after the OAuth, it tells me "Unable to login at server. Possibly wrong configuration, username or password."

This only happens to Gmail. I also tried Outlook and this didn't happen.

I then tried running thunderbird in the terminal to see what it outputs: (image 2)

"line 232: Script terminated by timeout"

Technical information: TB version: 128.5.1-1 (arch linux aur)

Hi,

I installed thunderbird in a new computer via flatpak. The computer is running PopOS 22.04 and the current Thunderbird version is 128.0esr.

I don't know if this happened after the last update from 127 to 128 or was like this before, but on the compose window all the menus and buttons on the top row are completeley invisible, white on white (if I hover over them, then they are slightly visible). See the first 2 images.

The main window is OK and everything is readable (see 3rd image).

I don't know how to change these colors.

Any help will be appreciated.

I'm using a VPN on my computer and phone and when I try to connect to the mail server, Thunderbird gives me an error saying that the mail server has disconnected. But when I disconnect from the VPN, everything works. This happens only with one mail server, on the others everything works OK even via VPN.

However, the the mail from this server is coming to my phone (where I use K-9 Mail).

I also tried to connect to the mail server via openssl, with the command "openssl s_client -connect mail.server.net:993 -crlf"

The connection is successful (when I'm on the VPN), but when I enter the command "a LOGIN my.username MYPASSWORD", it gives an error:

a NO [UNAVAILABLE] Maximum number of connections from user+IP exceeded (mail_max_userip_connections=20)

I have set the "Maximum Number of server connections to cache" to 1 in Thunderbird, I have set to check for mail every 12 minutes (it already was 15 minutes on the phone before), and it is still the same.

Any idea how to solve the issue? I am connecting to this server with the same username and from the same (VPN) IP only from my phone and my computer, so I find it really strange that there are more than 20 simultaneous connections...